Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
[linux/fpc-iii.git] / drivers / net / ethernet / amd / amd8111e.c
blob94960055fa1f802fcee1debd7584b4b1e7ed0cd3
2 /* Advanced Micro Devices Inc. AMD8111E Linux Network Driver
3 * Copyright (C) 2004 Advanced Micro Devices
6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
10 * Copyright 1993 United States Government as represented by the
11 * Director, National Security Agency.[ pcnet32.c ]
12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, see <http://www.gnu.org/licenses/>.
29 Module Name:
31 amd8111e.c
33 Abstract:
35 AMD8111 based 10/100 Ethernet Controller Driver.
37 Environment:
39 Kernel Mode
41 Revision History:
42 3.0.0
43 Initial Revision.
44 3.0.1
45 1. Dynamic interrupt coalescing.
46 2. Removed prev_stats.
47 3. MII support.
48 4. Dynamic IPG support
49 3.0.2 05/29/2003
50 1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
51 2. Bug fix: Fixed VLAN support failure.
52 3. Bug fix: Fixed receive interrupt coalescing bug.
53 4. Dynamic IPG support is disabled by default.
54 3.0.3 06/05/2003
55 1. Bug fix: Fixed failure to close the interface if SMP is enabled.
56 3.0.4 12/09/2003
57 1. Added set_mac_address routine for bonding driver support.
58 2. Tested the driver for bonding support
59 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
60 indicated to the h/w.
61 4. Modified amd8111e_rx() routine to receive all the received packets
62 in the first interrupt.
63 5. Bug fix: Corrected rx_errors reported in get_stats() function.
64 3.0.5 03/22/2004
65 1. Added NAPI support
70 #include <linux/module.h>
71 #include <linux/kernel.h>
72 #include <linux/types.h>
73 #include <linux/compiler.h>
74 #include <linux/delay.h>
75 #include <linux/interrupt.h>
76 #include <linux/ioport.h>
77 #include <linux/pci.h>
78 #include <linux/netdevice.h>
79 #include <linux/etherdevice.h>
80 #include <linux/skbuff.h>
81 #include <linux/ethtool.h>
82 #include <linux/mii.h>
83 #include <linux/if_vlan.h>
84 #include <linux/ctype.h>
85 #include <linux/crc32.h>
86 #include <linux/dma-mapping.h>
88 #include <asm/io.h>
89 #include <asm/byteorder.h>
90 #include <asm/uaccess.h>
92 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
93 #define AMD8111E_VLAN_TAG_USED 1
94 #else
95 #define AMD8111E_VLAN_TAG_USED 0
96 #endif
98 #include "amd8111e.h"
99 #define MODULE_NAME "amd8111e"
100 #define MODULE_VERS "3.0.7"
101 MODULE_AUTHOR("Advanced Micro Devices, Inc.");
102 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
103 MODULE_LICENSE("GPL");
104 module_param_array(speed_duplex, int, NULL, 0);
105 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
106 module_param_array(coalesce, bool, NULL, 0);
107 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
108 module_param_array(dynamic_ipg, bool, NULL, 0);
109 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
111 /* This function will read the PHY registers. */
112 static int amd8111e_read_phy(struct amd8111e_priv *lp,
113 int phy_id, int reg, u32 *val)
115 void __iomem *mmio = lp->mmio;
116 unsigned int reg_val;
117 unsigned int repeat= REPEAT_CNT;
119 reg_val = readl(mmio + PHY_ACCESS);
120 while (reg_val & PHY_CMD_ACTIVE)
121 reg_val = readl( mmio + PHY_ACCESS );
123 writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
124 ((reg & 0x1f) << 16), mmio +PHY_ACCESS);
126 reg_val = readl(mmio + PHY_ACCESS);
127 udelay(30); /* It takes 30 us to read/write data */
128 } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
129 if(reg_val & PHY_RD_ERR)
130 goto err_phy_read;
132 *val = reg_val & 0xffff;
133 return 0;
134 err_phy_read:
135 *val = 0;
136 return -EINVAL;
140 /* This function will write into PHY registers. */
141 static int amd8111e_write_phy(struct amd8111e_priv *lp,
142 int phy_id, int reg, u32 val)
144 unsigned int repeat = REPEAT_CNT;
145 void __iomem *mmio = lp->mmio;
146 unsigned int reg_val;
148 reg_val = readl(mmio + PHY_ACCESS);
149 while (reg_val & PHY_CMD_ACTIVE)
150 reg_val = readl( mmio + PHY_ACCESS );
152 writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
153 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
156 reg_val = readl(mmio + PHY_ACCESS);
157 udelay(30); /* It takes 30 us to read/write the data */
158 } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
160 if(reg_val & PHY_RD_ERR)
161 goto err_phy_write;
163 return 0;
165 err_phy_write:
166 return -EINVAL;
170 /* This is the mii register read function provided to the mii interface. */
171 static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num)
173 struct amd8111e_priv *lp = netdev_priv(dev);
174 unsigned int reg_val;
176 amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
177 return reg_val;
181 /* This is the mii register write function provided to the mii interface. */
182 static void amd8111e_mdio_write(struct net_device *dev,
183 int phy_id, int reg_num, int val)
185 struct amd8111e_priv *lp = netdev_priv(dev);
187 amd8111e_write_phy(lp, phy_id, reg_num, val);
190 /* This function will set PHY speed. During initialization sets
191 * the original speed to 100 full
193 static void amd8111e_set_ext_phy(struct net_device *dev)
195 struct amd8111e_priv *lp = netdev_priv(dev);
196 u32 bmcr,advert,tmp;
198 /* Determine mii register values to set the speed */
199 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
200 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
201 switch (lp->ext_phy_option){
203 default:
204 case SPEED_AUTONEG: /* advertise all values */
205 tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
206 ADVERTISE_100HALF|ADVERTISE_100FULL) ;
207 break;
208 case SPEED10_HALF:
209 tmp |= ADVERTISE_10HALF;
210 break;
211 case SPEED10_FULL:
212 tmp |= ADVERTISE_10FULL;
213 break;
214 case SPEED100_HALF:
215 tmp |= ADVERTISE_100HALF;
216 break;
217 case SPEED100_FULL:
218 tmp |= ADVERTISE_100FULL;
219 break;
222 if(advert != tmp)
223 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
224 /* Restart auto negotiation */
225 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
226 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
227 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
231 /* This function will unmap skb->data space and will free
232 * all transmit and receive skbuffs.
234 static int amd8111e_free_skbs(struct net_device *dev)
236 struct amd8111e_priv *lp = netdev_priv(dev);
237 struct sk_buff *rx_skbuff;
238 int i;
240 /* Freeing transmit skbs */
241 for(i = 0; i < NUM_TX_BUFFERS; i++){
242 if(lp->tx_skbuff[i]){
243 pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
244 dev_kfree_skb (lp->tx_skbuff[i]);
245 lp->tx_skbuff[i] = NULL;
246 lp->tx_dma_addr[i] = 0;
249 /* Freeing previously allocated receive buffers */
250 for (i = 0; i < NUM_RX_BUFFERS; i++){
251 rx_skbuff = lp->rx_skbuff[i];
252 if(rx_skbuff != NULL){
253 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
254 lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
255 dev_kfree_skb(lp->rx_skbuff[i]);
256 lp->rx_skbuff[i] = NULL;
257 lp->rx_dma_addr[i] = 0;
261 return 0;
264 /* This will set the receive buffer length corresponding
265 * to the mtu size of networkinterface.
267 static inline void amd8111e_set_rx_buff_len(struct net_device *dev)
269 struct amd8111e_priv *lp = netdev_priv(dev);
270 unsigned int mtu = dev->mtu;
272 if (mtu > ETH_DATA_LEN){
273 /* MTU + ethernet header + FCS
274 * + optional VLAN tag + skb reserve space 2
276 lp->rx_buff_len = mtu + ETH_HLEN + 10;
277 lp->options |= OPTION_JUMBO_ENABLE;
278 } else{
279 lp->rx_buff_len = PKT_BUFF_SZ;
280 lp->options &= ~OPTION_JUMBO_ENABLE;
284 /* This function will free all the previously allocated buffers,
285 * determine new receive buffer length and will allocate new receive buffers.
286 * This function also allocates and initializes both the transmitter
287 * and receive hardware descriptors.
289 static int amd8111e_init_ring(struct net_device *dev)
291 struct amd8111e_priv *lp = netdev_priv(dev);
292 int i;
294 lp->rx_idx = lp->tx_idx = 0;
295 lp->tx_complete_idx = 0;
296 lp->tx_ring_idx = 0;
299 if(lp->opened)
300 /* Free previously allocated transmit and receive skbs */
301 amd8111e_free_skbs(dev);
303 else{
304 /* allocate the tx and rx descriptors */
305 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
306 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
307 &lp->tx_ring_dma_addr)) == NULL)
309 goto err_no_mem;
311 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
312 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
313 &lp->rx_ring_dma_addr)) == NULL)
315 goto err_free_tx_ring;
318 /* Set new receive buff size */
319 amd8111e_set_rx_buff_len(dev);
321 /* Allocating receive skbs */
322 for (i = 0; i < NUM_RX_BUFFERS; i++) {
324 lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len);
325 if (!lp->rx_skbuff[i]) {
326 /* Release previos allocated skbs */
327 for(--i; i >= 0 ;i--)
328 dev_kfree_skb(lp->rx_skbuff[i]);
329 goto err_free_rx_ring;
331 skb_reserve(lp->rx_skbuff[i],2);
333 /* Initilaizing receive descriptors */
334 for (i = 0; i < NUM_RX_BUFFERS; i++) {
335 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
336 lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
338 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
339 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
340 wmb();
341 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
344 /* Initializing transmit descriptors */
345 for (i = 0; i < NUM_TX_RING_DR; i++) {
346 lp->tx_ring[i].buff_phy_addr = 0;
347 lp->tx_ring[i].tx_flags = 0;
348 lp->tx_ring[i].buff_count = 0;
351 return 0;
353 err_free_rx_ring:
355 pci_free_consistent(lp->pci_dev,
356 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
357 lp->rx_ring_dma_addr);
359 err_free_tx_ring:
361 pci_free_consistent(lp->pci_dev,
362 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
363 lp->tx_ring_dma_addr);
365 err_no_mem:
366 return -ENOMEM;
369 /* This function will set the interrupt coalescing according
370 * to the input arguments
372 static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod)
374 unsigned int timeout;
375 unsigned int event_count;
377 struct amd8111e_priv *lp = netdev_priv(dev);
378 void __iomem *mmio = lp->mmio;
379 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
382 switch(cmod)
384 case RX_INTR_COAL :
385 timeout = coal_conf->rx_timeout;
386 event_count = coal_conf->rx_event_count;
387 if( timeout > MAX_TIMEOUT ||
388 event_count > MAX_EVENT_COUNT )
389 return -EINVAL;
391 timeout = timeout * DELAY_TIMER_CONV;
392 writel(VAL0|STINTEN, mmio+INTEN0);
393 writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
394 mmio+DLY_INT_A);
395 break;
397 case TX_INTR_COAL :
398 timeout = coal_conf->tx_timeout;
399 event_count = coal_conf->tx_event_count;
400 if( timeout > MAX_TIMEOUT ||
401 event_count > MAX_EVENT_COUNT )
402 return -EINVAL;
405 timeout = timeout * DELAY_TIMER_CONV;
406 writel(VAL0|STINTEN,mmio+INTEN0);
407 writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
408 mmio+DLY_INT_B);
409 break;
411 case DISABLE_COAL:
412 writel(0,mmio+STVAL);
413 writel(STINTEN, mmio+INTEN0);
414 writel(0, mmio +DLY_INT_B);
415 writel(0, mmio+DLY_INT_A);
416 break;
417 case ENABLE_COAL:
418 /* Start the timer */
419 writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */
420 writel(VAL0|STINTEN, mmio+INTEN0);
421 break;
422 default:
423 break;
426 return 0;
430 /* This function initializes the device registers and starts the device. */
431 static int amd8111e_restart(struct net_device *dev)
433 struct amd8111e_priv *lp = netdev_priv(dev);
434 void __iomem *mmio = lp->mmio;
435 int i,reg_val;
437 /* stop the chip */
438 writel(RUN, mmio + CMD0);
440 if(amd8111e_init_ring(dev))
441 return -ENOMEM;
443 /* enable the port manager and set auto negotiation always */
444 writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
445 writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
447 amd8111e_set_ext_phy(dev);
449 /* set control registers */
450 reg_val = readl(mmio + CTRL1);
451 reg_val &= ~XMTSP_MASK;
452 writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
454 /* enable interrupt */
455 writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
456 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
457 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
459 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
461 /* initialize tx and rx ring base addresses */
462 writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
463 writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
465 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
466 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
468 /* set default IPG to 96 */
469 writew((u32)DEFAULT_IPG,mmio+IPG);
470 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
472 if(lp->options & OPTION_JUMBO_ENABLE){
473 writel((u32)VAL2|JUMBO, mmio + CMD3);
474 /* Reset REX_UFLO */
475 writel( REX_UFLO, mmio + CMD2);
476 /* Should not set REX_UFLO for jumbo frames */
477 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
478 }else{
479 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
480 writel((u32)JUMBO, mmio + CMD3);
483 #if AMD8111E_VLAN_TAG_USED
484 writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
485 #endif
486 writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
488 /* Setting the MAC address to the device */
489 for (i = 0; i < ETH_ALEN; i++)
490 writeb( dev->dev_addr[i], mmio + PADR + i );
492 /* Enable interrupt coalesce */
493 if(lp->options & OPTION_INTR_COAL_ENABLE){
494 netdev_info(dev, "Interrupt Coalescing Enabled.\n");
495 amd8111e_set_coalesce(dev,ENABLE_COAL);
498 /* set RUN bit to start the chip */
499 writel(VAL2 | RDMD0, mmio + CMD0);
500 writel(VAL0 | INTREN | RUN, mmio + CMD0);
502 /* To avoid PCI posting bug */
503 readl(mmio+CMD0);
504 return 0;
507 /* This function clears necessary the device registers. */
508 static void amd8111e_init_hw_default(struct amd8111e_priv *lp)
510 unsigned int reg_val;
511 unsigned int logic_filter[2] ={0,};
512 void __iomem *mmio = lp->mmio;
515 /* stop the chip */
516 writel(RUN, mmio + CMD0);
518 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
519 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
521 /* Clear RCV_RING_BASE_ADDR */
522 writel(0, mmio + RCV_RING_BASE_ADDR0);
524 /* Clear XMT_RING_BASE_ADDR */
525 writel(0, mmio + XMT_RING_BASE_ADDR0);
526 writel(0, mmio + XMT_RING_BASE_ADDR1);
527 writel(0, mmio + XMT_RING_BASE_ADDR2);
528 writel(0, mmio + XMT_RING_BASE_ADDR3);
530 /* Clear CMD0 */
531 writel(CMD0_CLEAR,mmio + CMD0);
533 /* Clear CMD2 */
534 writel(CMD2_CLEAR, mmio +CMD2);
536 /* Clear CMD7 */
537 writel(CMD7_CLEAR , mmio + CMD7);
539 /* Clear DLY_INT_A and DLY_INT_B */
540 writel(0x0, mmio + DLY_INT_A);
541 writel(0x0, mmio + DLY_INT_B);
543 /* Clear FLOW_CONTROL */
544 writel(0x0, mmio + FLOW_CONTROL);
546 /* Clear INT0 write 1 to clear register */
547 reg_val = readl(mmio + INT0);
548 writel(reg_val, mmio + INT0);
550 /* Clear STVAL */
551 writel(0x0, mmio + STVAL);
553 /* Clear INTEN0 */
554 writel( INTEN0_CLEAR, mmio + INTEN0);
556 /* Clear LADRF */
557 writel(0x0 , mmio + LADRF);
559 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */
560 writel( 0x80010,mmio + SRAM_SIZE);
562 /* Clear RCV_RING0_LEN */
563 writel(0x0, mmio + RCV_RING_LEN0);
565 /* Clear XMT_RING0/1/2/3_LEN */
566 writel(0x0, mmio + XMT_RING_LEN0);
567 writel(0x0, mmio + XMT_RING_LEN1);
568 writel(0x0, mmio + XMT_RING_LEN2);
569 writel(0x0, mmio + XMT_RING_LEN3);
571 /* Clear XMT_RING_LIMIT */
572 writel(0x0, mmio + XMT_RING_LIMIT);
574 /* Clear MIB */
575 writew(MIB_CLEAR, mmio + MIB_ADDR);
577 /* Clear LARF */
578 amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF);
580 /* SRAM_SIZE register */
581 reg_val = readl(mmio + SRAM_SIZE);
583 if(lp->options & OPTION_JUMBO_ENABLE)
584 writel( VAL2|JUMBO, mmio + CMD3);
585 #if AMD8111E_VLAN_TAG_USED
586 writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
587 #endif
588 /* Set default value to CTRL1 Register */
589 writel(CTRL1_DEFAULT, mmio + CTRL1);
591 /* To avoid PCI posting bug */
592 readl(mmio + CMD2);
596 /* This function disables the interrupt and clears all the pending
597 * interrupts in INT0
599 static void amd8111e_disable_interrupt(struct amd8111e_priv *lp)
601 u32 intr0;
603 /* Disable interrupt */
604 writel(INTREN, lp->mmio + CMD0);
606 /* Clear INT0 */
607 intr0 = readl(lp->mmio + INT0);
608 writel(intr0, lp->mmio + INT0);
610 /* To avoid PCI posting bug */
611 readl(lp->mmio + INT0);
615 /* This function stops the chip. */
616 static void amd8111e_stop_chip(struct amd8111e_priv *lp)
618 writel(RUN, lp->mmio + CMD0);
620 /* To avoid PCI posting bug */
621 readl(lp->mmio + CMD0);
624 /* This function frees the transmiter and receiver descriptor rings. */
625 static void amd8111e_free_ring(struct amd8111e_priv *lp)
627 /* Free transmit and receive descriptor rings */
628 if(lp->rx_ring){
629 pci_free_consistent(lp->pci_dev,
630 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
631 lp->rx_ring, lp->rx_ring_dma_addr);
632 lp->rx_ring = NULL;
635 if(lp->tx_ring){
636 pci_free_consistent(lp->pci_dev,
637 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
638 lp->tx_ring, lp->tx_ring_dma_addr);
640 lp->tx_ring = NULL;
645 /* This function will free all the transmit skbs that are actually
646 * transmitted by the device. It will check the ownership of the
647 * skb before freeing the skb.
649 static int amd8111e_tx(struct net_device *dev)
651 struct amd8111e_priv *lp = netdev_priv(dev);
652 int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
653 int status;
654 /* Complete all the transmit packet */
655 while (lp->tx_complete_idx != lp->tx_idx){
656 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
657 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
659 if(status & OWN_BIT)
660 break; /* It still hasn't been Txed */
662 lp->tx_ring[tx_index].buff_phy_addr = 0;
664 /* We must free the original skb */
665 if (lp->tx_skbuff[tx_index]) {
666 pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
667 lp->tx_skbuff[tx_index]->len,
668 PCI_DMA_TODEVICE);
669 dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
670 lp->tx_skbuff[tx_index] = NULL;
671 lp->tx_dma_addr[tx_index] = 0;
673 lp->tx_complete_idx++;
674 /*COAL update tx coalescing parameters */
675 lp->coal_conf.tx_packets++;
676 lp->coal_conf.tx_bytes +=
677 le16_to_cpu(lp->tx_ring[tx_index].buff_count);
679 if (netif_queue_stopped(dev) &&
680 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
681 /* The ring is no longer full, clear tbusy. */
682 /* lp->tx_full = 0; */
683 netif_wake_queue (dev);
686 return 0;
689 /* This function handles the driver receive operation in polling mode */
690 static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
692 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
693 struct net_device *dev = lp->amd8111e_net_dev;
694 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
695 void __iomem *mmio = lp->mmio;
696 struct sk_buff *skb,*new_skb;
697 int min_pkt_len, status;
698 unsigned int intr0;
699 int num_rx_pkt = 0;
700 short pkt_len;
701 #if AMD8111E_VLAN_TAG_USED
702 short vtag;
703 #endif
704 int rx_pkt_limit = budget;
705 unsigned long flags;
707 if (rx_pkt_limit <= 0)
708 goto rx_not_empty;
711 /* process receive packets until we use the quota.
712 * If we own the next entry, it's a new packet. Send it up.
714 while(1) {
715 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
716 if (status & OWN_BIT)
717 break;
719 /* There is a tricky error noted by John Murphy,
720 * <murf@perftech.com> to Russ Nelson: Even with
721 * full-sized * buffers it's possible for a
722 * jabber packet to use two buffers, with only
723 * the last correctly noting the error.
725 if(status & ERR_BIT) {
726 /* resetting flags */
727 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
728 goto err_next_pkt;
730 /* check for STP and ENP */
731 if(!((status & STP_BIT) && (status & ENP_BIT))){
732 /* resetting flags */
733 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
734 goto err_next_pkt;
736 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
738 #if AMD8111E_VLAN_TAG_USED
739 vtag = status & TT_MASK;
740 /*MAC will strip vlan tag*/
741 if (vtag != 0)
742 min_pkt_len =MIN_PKT_LEN - 4;
743 else
744 #endif
745 min_pkt_len =MIN_PKT_LEN;
747 if (pkt_len < min_pkt_len) {
748 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
749 lp->drv_rx_errors++;
750 goto err_next_pkt;
752 if(--rx_pkt_limit < 0)
753 goto rx_not_empty;
754 new_skb = netdev_alloc_skb(dev, lp->rx_buff_len);
755 if (!new_skb) {
756 /* if allocation fail,
757 * ignore that pkt and go to next one
759 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
760 lp->drv_rx_errors++;
761 goto err_next_pkt;
764 skb_reserve(new_skb, 2);
765 skb = lp->rx_skbuff[rx_index];
766 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
767 lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
768 skb_put(skb, pkt_len);
769 lp->rx_skbuff[rx_index] = new_skb;
770 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
771 new_skb->data,
772 lp->rx_buff_len-2,
773 PCI_DMA_FROMDEVICE);
775 skb->protocol = eth_type_trans(skb, dev);
777 #if AMD8111E_VLAN_TAG_USED
778 if (vtag == TT_VLAN_TAGGED){
779 u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info);
780 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
782 #endif
783 netif_receive_skb(skb);
784 /*COAL update rx coalescing parameters*/
785 lp->coal_conf.rx_packets++;
786 lp->coal_conf.rx_bytes += pkt_len;
787 num_rx_pkt++;
789 err_next_pkt:
790 lp->rx_ring[rx_index].buff_phy_addr
791 = cpu_to_le32(lp->rx_dma_addr[rx_index]);
792 lp->rx_ring[rx_index].buff_count =
793 cpu_to_le16(lp->rx_buff_len-2);
794 wmb();
795 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
796 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
798 /* Check the interrupt status register for more packets in the
799 * mean time. Process them since we have not used up our quota.
801 intr0 = readl(mmio + INT0);
802 /*Ack receive packets */
803 writel(intr0 & RINT0,mmio + INT0);
805 } while(intr0 & RINT0);
807 if (rx_pkt_limit > 0) {
808 /* Receive descriptor is empty now */
809 spin_lock_irqsave(&lp->lock, flags);
810 __napi_complete(napi);
811 writel(VAL0|RINTEN0, mmio + INTEN0);
812 writel(VAL2 | RDMD0, mmio + CMD0);
813 spin_unlock_irqrestore(&lp->lock, flags);
816 rx_not_empty:
817 return num_rx_pkt;
820 /* This function will indicate the link status to the kernel. */
821 static int amd8111e_link_change(struct net_device *dev)
823 struct amd8111e_priv *lp = netdev_priv(dev);
824 int status0,speed;
826 /* read the link change */
827 status0 = readl(lp->mmio + STAT0);
829 if(status0 & LINK_STATS){
830 if(status0 & AUTONEG_COMPLETE)
831 lp->link_config.autoneg = AUTONEG_ENABLE;
832 else
833 lp->link_config.autoneg = AUTONEG_DISABLE;
835 if(status0 & FULL_DPLX)
836 lp->link_config.duplex = DUPLEX_FULL;
837 else
838 lp->link_config.duplex = DUPLEX_HALF;
839 speed = (status0 & SPEED_MASK) >> 7;
840 if(speed == PHY_SPEED_10)
841 lp->link_config.speed = SPEED_10;
842 else if(speed == PHY_SPEED_100)
843 lp->link_config.speed = SPEED_100;
845 netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n",
846 (lp->link_config.speed == SPEED_100) ?
847 "100" : "10",
848 (lp->link_config.duplex == DUPLEX_FULL) ?
849 "Full" : "Half");
851 netif_carrier_on(dev);
853 else{
854 lp->link_config.speed = SPEED_INVALID;
855 lp->link_config.duplex = DUPLEX_INVALID;
856 lp->link_config.autoneg = AUTONEG_INVALID;
857 netdev_info(dev, "Link is Down.\n");
858 netif_carrier_off(dev);
861 return 0;
864 /* This function reads the mib counters. */
865 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
867 unsigned int status;
868 unsigned int data;
869 unsigned int repeat = REPEAT_CNT;
871 writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
872 do {
873 status = readw(mmio + MIB_ADDR);
874 udelay(2); /* controller takes MAX 2 us to get mib data */
876 while (--repeat && (status & MIB_CMD_ACTIVE));
878 data = readl(mmio + MIB_DATA);
879 return data;
882 /* This function reads the mib registers and returns the hardware statistics.
883 * It updates previous internal driver statistics with new values.
885 static struct net_device_stats *amd8111e_get_stats(struct net_device *dev)
887 struct amd8111e_priv *lp = netdev_priv(dev);
888 void __iomem *mmio = lp->mmio;
889 unsigned long flags;
890 struct net_device_stats *new_stats = &dev->stats;
892 if (!lp->opened)
893 return new_stats;
894 spin_lock_irqsave (&lp->lock, flags);
896 /* stats.rx_packets */
897 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
898 amd8111e_read_mib(mmio, rcv_multicast_pkts)+
899 amd8111e_read_mib(mmio, rcv_unicast_pkts);
901 /* stats.tx_packets */
902 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
904 /*stats.rx_bytes */
905 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
907 /* stats.tx_bytes */
908 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
910 /* stats.rx_errors */
911 /* hw errors + errors driver reported */
912 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
913 amd8111e_read_mib(mmio, rcv_fragments)+
914 amd8111e_read_mib(mmio, rcv_jabbers)+
915 amd8111e_read_mib(mmio, rcv_alignment_errors)+
916 amd8111e_read_mib(mmio, rcv_fcs_errors)+
917 amd8111e_read_mib(mmio, rcv_miss_pkts)+
918 lp->drv_rx_errors;
920 /* stats.tx_errors */
921 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
923 /* stats.rx_dropped*/
924 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
926 /* stats.tx_dropped*/
927 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts);
929 /* stats.multicast*/
930 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
932 /* stats.collisions*/
933 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
935 /* stats.rx_length_errors*/
936 new_stats->rx_length_errors =
937 amd8111e_read_mib(mmio, rcv_undersize_pkts)+
938 amd8111e_read_mib(mmio, rcv_oversize_pkts);
940 /* stats.rx_over_errors*/
941 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
943 /* stats.rx_crc_errors*/
944 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
946 /* stats.rx_frame_errors*/
947 new_stats->rx_frame_errors =
948 amd8111e_read_mib(mmio, rcv_alignment_errors);
950 /* stats.rx_fifo_errors */
951 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
953 /* stats.rx_missed_errors */
954 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
956 /* stats.tx_aborted_errors*/
957 new_stats->tx_aborted_errors =
958 amd8111e_read_mib(mmio, xmt_excessive_collision);
960 /* stats.tx_carrier_errors*/
961 new_stats->tx_carrier_errors =
962 amd8111e_read_mib(mmio, xmt_loss_carrier);
964 /* stats.tx_fifo_errors*/
965 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
967 /* stats.tx_window_errors*/
968 new_stats->tx_window_errors =
969 amd8111e_read_mib(mmio, xmt_late_collision);
971 /* Reset the mibs for collecting new statistics */
972 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
974 spin_unlock_irqrestore (&lp->lock, flags);
976 return new_stats;
979 /* This function recalculate the interrupt coalescing mode on every interrupt
980 * according to the datarate and the packet rate.
982 static int amd8111e_calc_coalesce(struct net_device *dev)
984 struct amd8111e_priv *lp = netdev_priv(dev);
985 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
986 int tx_pkt_rate;
987 int rx_pkt_rate;
988 int tx_data_rate;
989 int rx_data_rate;
990 int rx_pkt_size;
991 int tx_pkt_size;
993 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
994 coal_conf->tx_prev_packets = coal_conf->tx_packets;
996 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
997 coal_conf->tx_prev_bytes = coal_conf->tx_bytes;
999 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
1000 coal_conf->rx_prev_packets = coal_conf->rx_packets;
1002 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
1003 coal_conf->rx_prev_bytes = coal_conf->rx_bytes;
1005 if(rx_pkt_rate < 800){
1006 if(coal_conf->rx_coal_type != NO_COALESCE){
1008 coal_conf->rx_timeout = 0x0;
1009 coal_conf->rx_event_count = 0;
1010 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1011 coal_conf->rx_coal_type = NO_COALESCE;
1014 else{
1016 rx_pkt_size = rx_data_rate/rx_pkt_rate;
1017 if (rx_pkt_size < 128){
1018 if(coal_conf->rx_coal_type != NO_COALESCE){
1020 coal_conf->rx_timeout = 0;
1021 coal_conf->rx_event_count = 0;
1022 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1023 coal_conf->rx_coal_type = NO_COALESCE;
1027 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
1029 if(coal_conf->rx_coal_type != LOW_COALESCE){
1030 coal_conf->rx_timeout = 1;
1031 coal_conf->rx_event_count = 4;
1032 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1033 coal_conf->rx_coal_type = LOW_COALESCE;
1036 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
1038 if(coal_conf->rx_coal_type != MEDIUM_COALESCE){
1039 coal_conf->rx_timeout = 1;
1040 coal_conf->rx_event_count = 4;
1041 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1042 coal_conf->rx_coal_type = MEDIUM_COALESCE;
1046 else if(rx_pkt_size >= 1024){
1047 if(coal_conf->rx_coal_type != HIGH_COALESCE){
1048 coal_conf->rx_timeout = 2;
1049 coal_conf->rx_event_count = 3;
1050 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1051 coal_conf->rx_coal_type = HIGH_COALESCE;
1055 /* NOW FOR TX INTR COALESC */
1056 if(tx_pkt_rate < 800){
1057 if(coal_conf->tx_coal_type != NO_COALESCE){
1059 coal_conf->tx_timeout = 0x0;
1060 coal_conf->tx_event_count = 0;
1061 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1062 coal_conf->tx_coal_type = NO_COALESCE;
1065 else{
1067 tx_pkt_size = tx_data_rate/tx_pkt_rate;
1068 if (tx_pkt_size < 128){
1070 if(coal_conf->tx_coal_type != NO_COALESCE){
1072 coal_conf->tx_timeout = 0;
1073 coal_conf->tx_event_count = 0;
1074 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1075 coal_conf->tx_coal_type = NO_COALESCE;
1079 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
1081 if(coal_conf->tx_coal_type != LOW_COALESCE){
1082 coal_conf->tx_timeout = 1;
1083 coal_conf->tx_event_count = 2;
1084 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1085 coal_conf->tx_coal_type = LOW_COALESCE;
1089 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
1091 if(coal_conf->tx_coal_type != MEDIUM_COALESCE){
1092 coal_conf->tx_timeout = 2;
1093 coal_conf->tx_event_count = 5;
1094 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1095 coal_conf->tx_coal_type = MEDIUM_COALESCE;
1099 else if(tx_pkt_size >= 1024){
1100 if (tx_pkt_size >= 1024){
1101 if(coal_conf->tx_coal_type != HIGH_COALESCE){
1102 coal_conf->tx_timeout = 4;
1103 coal_conf->tx_event_count = 8;
1104 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1105 coal_conf->tx_coal_type = HIGH_COALESCE;
1110 return 0;
1114 /* This is device interrupt function. It handles transmit,
1115 * receive,link change and hardware timer interrupts.
1117 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
1120 struct net_device *dev = (struct net_device *)dev_id;
1121 struct amd8111e_priv *lp = netdev_priv(dev);
1122 void __iomem *mmio = lp->mmio;
1123 unsigned int intr0, intren0;
1124 unsigned int handled = 1;
1126 if(unlikely(dev == NULL))
1127 return IRQ_NONE;
1129 spin_lock(&lp->lock);
1131 /* disabling interrupt */
1132 writel(INTREN, mmio + CMD0);
1134 /* Read interrupt status */
1135 intr0 = readl(mmio + INT0);
1136 intren0 = readl(mmio + INTEN0);
1138 /* Process all the INT event until INTR bit is clear. */
1140 if (!(intr0 & INTR)){
1141 handled = 0;
1142 goto err_no_interrupt;
1145 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1146 writel(intr0, mmio + INT0);
1148 /* Check if Receive Interrupt has occurred. */
1149 if (intr0 & RINT0) {
1150 if (napi_schedule_prep(&lp->napi)) {
1151 /* Disable receive interupts */
1152 writel(RINTEN0, mmio + INTEN0);
1153 /* Schedule a polling routine */
1154 __napi_schedule(&lp->napi);
1155 } else if (intren0 & RINTEN0) {
1156 netdev_dbg(dev, "************Driver bug! interrupt while in poll\n");
1157 /* Fix by disable receive interrupts */
1158 writel(RINTEN0, mmio + INTEN0);
1162 /* Check if Transmit Interrupt has occurred. */
1163 if (intr0 & TINT0)
1164 amd8111e_tx(dev);
1166 /* Check if Link Change Interrupt has occurred. */
1167 if (intr0 & LCINT)
1168 amd8111e_link_change(dev);
1170 /* Check if Hardware Timer Interrupt has occurred. */
1171 if (intr0 & STINT)
1172 amd8111e_calc_coalesce(dev);
1174 err_no_interrupt:
1175 writel( VAL0 | INTREN,mmio + CMD0);
1177 spin_unlock(&lp->lock);
1179 return IRQ_RETVAL(handled);
1182 #ifdef CONFIG_NET_POLL_CONTROLLER
1183 static void amd8111e_poll(struct net_device *dev)
1185 unsigned long flags;
1186 local_irq_save(flags);
1187 amd8111e_interrupt(0, dev);
1188 local_irq_restore(flags);
1190 #endif
1193 /* This function closes the network interface and updates
1194 * the statistics so that most recent statistics will be
1195 * available after the interface is down.
1197 static int amd8111e_close(struct net_device *dev)
1199 struct amd8111e_priv *lp = netdev_priv(dev);
1200 netif_stop_queue(dev);
1202 napi_disable(&lp->napi);
1204 spin_lock_irq(&lp->lock);
1206 amd8111e_disable_interrupt(lp);
1207 amd8111e_stop_chip(lp);
1209 /* Free transmit and receive skbs */
1210 amd8111e_free_skbs(lp->amd8111e_net_dev);
1212 netif_carrier_off(lp->amd8111e_net_dev);
1214 /* Delete ipg timer */
1215 if(lp->options & OPTION_DYN_IPG_ENABLE)
1216 del_timer_sync(&lp->ipg_data.ipg_timer);
1218 spin_unlock_irq(&lp->lock);
1219 free_irq(dev->irq, dev);
1220 amd8111e_free_ring(lp);
1222 /* Update the statistics before closing */
1223 amd8111e_get_stats(dev);
1224 lp->opened = 0;
1225 return 0;
1228 /* This function opens new interface.It requests irq for the device,
1229 * initializes the device,buffers and descriptors, and starts the device.
1231 static int amd8111e_open(struct net_device *dev)
1233 struct amd8111e_priv *lp = netdev_priv(dev);
1235 if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
1236 dev->name, dev))
1237 return -EAGAIN;
1239 napi_enable(&lp->napi);
1241 spin_lock_irq(&lp->lock);
1243 amd8111e_init_hw_default(lp);
1245 if(amd8111e_restart(dev)){
1246 spin_unlock_irq(&lp->lock);
1247 napi_disable(&lp->napi);
1248 if (dev->irq)
1249 free_irq(dev->irq, dev);
1250 return -ENOMEM;
1252 /* Start ipg timer */
1253 if(lp->options & OPTION_DYN_IPG_ENABLE){
1254 add_timer(&lp->ipg_data.ipg_timer);
1255 netdev_info(dev, "Dynamic IPG Enabled\n");
1258 lp->opened = 1;
1260 spin_unlock_irq(&lp->lock);
1262 netif_start_queue(dev);
1264 return 0;
1267 /* This function checks if there is any transmit descriptors
1268 * available to queue more packet.
1270 static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp)
1272 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1273 if (lp->tx_skbuff[tx_index])
1274 return -1;
1275 else
1276 return 0;
1280 /* This function will queue the transmit packets to the
1281 * descriptors and will trigger the send operation. It also
1282 * initializes the transmit descriptors with buffer physical address,
1283 * byte count, ownership to hardware etc.
1285 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
1286 struct net_device *dev)
1288 struct amd8111e_priv *lp = netdev_priv(dev);
1289 int tx_index;
1290 unsigned long flags;
1292 spin_lock_irqsave(&lp->lock, flags);
1294 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1296 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1298 lp->tx_skbuff[tx_index] = skb;
1299 lp->tx_ring[tx_index].tx_flags = 0;
1301 #if AMD8111E_VLAN_TAG_USED
1302 if (skb_vlan_tag_present(skb)) {
1303 lp->tx_ring[tx_index].tag_ctrl_cmd |=
1304 cpu_to_le16(TCC_VLAN_INSERT);
1305 lp->tx_ring[tx_index].tag_ctrl_info =
1306 cpu_to_le16(skb_vlan_tag_get(skb));
1309 #endif
1310 lp->tx_dma_addr[tx_index] =
1311 pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
1312 lp->tx_ring[tx_index].buff_phy_addr =
1313 cpu_to_le32(lp->tx_dma_addr[tx_index]);
1315 /* Set FCS and LTINT bits */
1316 wmb();
1317 lp->tx_ring[tx_index].tx_flags |=
1318 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1320 lp->tx_idx++;
1322 /* Trigger an immediate send poll. */
1323 writel( VAL1 | TDMD0, lp->mmio + CMD0);
1324 writel( VAL2 | RDMD0,lp->mmio + CMD0);
1326 if(amd8111e_tx_queue_avail(lp) < 0){
1327 netif_stop_queue(dev);
1329 spin_unlock_irqrestore(&lp->lock, flags);
1330 return NETDEV_TX_OK;
1332 /* This function returns all the memory mapped registers of the device. */
1333 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1335 void __iomem *mmio = lp->mmio;
1336 /* Read only necessary registers */
1337 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1338 buf[1] = readl(mmio + XMT_RING_LEN0);
1339 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1340 buf[3] = readl(mmio + RCV_RING_LEN0);
1341 buf[4] = readl(mmio + CMD0);
1342 buf[5] = readl(mmio + CMD2);
1343 buf[6] = readl(mmio + CMD3);
1344 buf[7] = readl(mmio + CMD7);
1345 buf[8] = readl(mmio + INT0);
1346 buf[9] = readl(mmio + INTEN0);
1347 buf[10] = readl(mmio + LADRF);
1348 buf[11] = readl(mmio + LADRF+4);
1349 buf[12] = readl(mmio + STAT0);
1353 /* This function sets promiscuos mode, all-multi mode or the multicast address
1354 * list to the device.
1356 static void amd8111e_set_multicast_list(struct net_device *dev)
1358 struct netdev_hw_addr *ha;
1359 struct amd8111e_priv *lp = netdev_priv(dev);
1360 u32 mc_filter[2] ;
1361 int bit_num;
1363 if(dev->flags & IFF_PROMISC){
1364 writel( VAL2 | PROM, lp->mmio + CMD2);
1365 return;
1367 else
1368 writel( PROM, lp->mmio + CMD2);
1369 if (dev->flags & IFF_ALLMULTI ||
1370 netdev_mc_count(dev) > MAX_FILTER_SIZE) {
1371 /* get all multicast packet */
1372 mc_filter[1] = mc_filter[0] = 0xffffffff;
1373 lp->options |= OPTION_MULTICAST_ENABLE;
1374 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1375 return;
1377 if (netdev_mc_empty(dev)) {
1378 /* get only own packets */
1379 mc_filter[1] = mc_filter[0] = 0;
1380 lp->options &= ~OPTION_MULTICAST_ENABLE;
1381 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1382 /* disable promiscuous mode */
1383 writel(PROM, lp->mmio + CMD2);
1384 return;
1386 /* load all the multicast addresses in the logic filter */
1387 lp->options |= OPTION_MULTICAST_ENABLE;
1388 mc_filter[1] = mc_filter[0] = 0;
1389 netdev_for_each_mc_addr(ha, dev) {
1390 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
1391 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1393 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1395 /* To eliminate PCI posting bug */
1396 readl(lp->mmio + CMD2);
1400 static void amd8111e_get_drvinfo(struct net_device *dev,
1401 struct ethtool_drvinfo *info)
1403 struct amd8111e_priv *lp = netdev_priv(dev);
1404 struct pci_dev *pci_dev = lp->pci_dev;
1405 strlcpy(info->driver, MODULE_NAME, sizeof(info->driver));
1406 strlcpy(info->version, MODULE_VERS, sizeof(info->version));
1407 snprintf(info->fw_version, sizeof(info->fw_version),
1408 "%u", chip_version);
1409 strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info));
1412 static int amd8111e_get_regs_len(struct net_device *dev)
1414 return AMD8111E_REG_DUMP_LEN;
1417 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1419 struct amd8111e_priv *lp = netdev_priv(dev);
1420 regs->version = 0;
1421 amd8111e_read_regs(lp, buf);
1424 static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1426 struct amd8111e_priv *lp = netdev_priv(dev);
1427 spin_lock_irq(&lp->lock);
1428 mii_ethtool_gset(&lp->mii_if, ecmd);
1429 spin_unlock_irq(&lp->lock);
1430 return 0;
1433 static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1435 struct amd8111e_priv *lp = netdev_priv(dev);
1436 int res;
1437 spin_lock_irq(&lp->lock);
1438 res = mii_ethtool_sset(&lp->mii_if, ecmd);
1439 spin_unlock_irq(&lp->lock);
1440 return res;
1443 static int amd8111e_nway_reset(struct net_device *dev)
1445 struct amd8111e_priv *lp = netdev_priv(dev);
1446 return mii_nway_restart(&lp->mii_if);
1449 static u32 amd8111e_get_link(struct net_device *dev)
1451 struct amd8111e_priv *lp = netdev_priv(dev);
1452 return mii_link_ok(&lp->mii_if);
1455 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1457 struct amd8111e_priv *lp = netdev_priv(dev);
1458 wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1459 if (lp->options & OPTION_WOL_ENABLE)
1460 wol_info->wolopts = WAKE_MAGIC;
1463 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1465 struct amd8111e_priv *lp = netdev_priv(dev);
1466 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1467 return -EINVAL;
1468 spin_lock_irq(&lp->lock);
1469 if (wol_info->wolopts & WAKE_MAGIC)
1470 lp->options |=
1471 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1472 else if(wol_info->wolopts & WAKE_PHY)
1473 lp->options |=
1474 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1475 else
1476 lp->options &= ~OPTION_WOL_ENABLE;
1477 spin_unlock_irq(&lp->lock);
1478 return 0;
1481 static const struct ethtool_ops ops = {
1482 .get_drvinfo = amd8111e_get_drvinfo,
1483 .get_regs_len = amd8111e_get_regs_len,
1484 .get_regs = amd8111e_get_regs,
1485 .get_settings = amd8111e_get_settings,
1486 .set_settings = amd8111e_set_settings,
1487 .nway_reset = amd8111e_nway_reset,
1488 .get_link = amd8111e_get_link,
1489 .get_wol = amd8111e_get_wol,
1490 .set_wol = amd8111e_set_wol,
1493 /* This function handles all the ethtool ioctls. It gives driver info,
1494 * gets/sets driver speed, gets memory mapped register values, forces
1495 * auto negotiation, sets/gets WOL options for ethtool application.
1497 static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd)
1499 struct mii_ioctl_data *data = if_mii(ifr);
1500 struct amd8111e_priv *lp = netdev_priv(dev);
1501 int err;
1502 u32 mii_regval;
1504 switch(cmd) {
1505 case SIOCGMIIPHY:
1506 data->phy_id = lp->ext_phy_addr;
1508 /* fallthru */
1509 case SIOCGMIIREG:
1511 spin_lock_irq(&lp->lock);
1512 err = amd8111e_read_phy(lp, data->phy_id,
1513 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1514 spin_unlock_irq(&lp->lock);
1516 data->val_out = mii_regval;
1517 return err;
1519 case SIOCSMIIREG:
1521 spin_lock_irq(&lp->lock);
1522 err = amd8111e_write_phy(lp, data->phy_id,
1523 data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1524 spin_unlock_irq(&lp->lock);
1526 return err;
1528 default:
1529 /* do nothing */
1530 break;
1532 return -EOPNOTSUPP;
1534 static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1536 struct amd8111e_priv *lp = netdev_priv(dev);
1537 int i;
1538 struct sockaddr *addr = p;
1540 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1541 spin_lock_irq(&lp->lock);
1542 /* Setting the MAC address to the device */
1543 for (i = 0; i < ETH_ALEN; i++)
1544 writeb( dev->dev_addr[i], lp->mmio + PADR + i );
1546 spin_unlock_irq(&lp->lock);
1548 return 0;
1551 /* This function changes the mtu of the device. It restarts the device to
1552 * initialize the descriptor with new receive buffers.
1554 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1556 struct amd8111e_priv *lp = netdev_priv(dev);
1557 int err;
1559 if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
1560 return -EINVAL;
1562 if (!netif_running(dev)) {
1563 /* new_mtu will be used
1564 * when device starts netxt time
1566 dev->mtu = new_mtu;
1567 return 0;
1570 spin_lock_irq(&lp->lock);
1572 /* stop the chip */
1573 writel(RUN, lp->mmio + CMD0);
1575 dev->mtu = new_mtu;
1577 err = amd8111e_restart(dev);
1578 spin_unlock_irq(&lp->lock);
1579 if(!err)
1580 netif_start_queue(dev);
1581 return err;
1584 static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp)
1586 writel( VAL1|MPPLBA, lp->mmio + CMD3);
1587 writel( VAL0|MPEN_SW, lp->mmio + CMD7);
1589 /* To eliminate PCI posting bug */
1590 readl(lp->mmio + CMD7);
1591 return 0;
1594 static int amd8111e_enable_link_change(struct amd8111e_priv *lp)
1597 /* Adapter is already stoped/suspended/interrupt-disabled */
1598 writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
1600 /* To eliminate PCI posting bug */
1601 readl(lp->mmio + CMD7);
1602 return 0;
1605 /* This function is called when a packet transmission fails to complete
1606 * within a reasonable period, on the assumption that an interrupt have
1607 * failed or the interface is locked up. This function will reinitialize
1608 * the hardware.
1610 static void amd8111e_tx_timeout(struct net_device *dev)
1612 struct amd8111e_priv *lp = netdev_priv(dev);
1613 int err;
1615 netdev_err(dev, "transmit timed out, resetting\n");
1617 spin_lock_irq(&lp->lock);
1618 err = amd8111e_restart(dev);
1619 spin_unlock_irq(&lp->lock);
1620 if(!err)
1621 netif_wake_queue(dev);
1623 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
1625 struct net_device *dev = pci_get_drvdata(pci_dev);
1626 struct amd8111e_priv *lp = netdev_priv(dev);
1628 if (!netif_running(dev))
1629 return 0;
1631 /* disable the interrupt */
1632 spin_lock_irq(&lp->lock);
1633 amd8111e_disable_interrupt(lp);
1634 spin_unlock_irq(&lp->lock);
1636 netif_device_detach(dev);
1638 /* stop chip */
1639 spin_lock_irq(&lp->lock);
1640 if(lp->options & OPTION_DYN_IPG_ENABLE)
1641 del_timer_sync(&lp->ipg_data.ipg_timer);
1642 amd8111e_stop_chip(lp);
1643 spin_unlock_irq(&lp->lock);
1645 if(lp->options & OPTION_WOL_ENABLE){
1646 /* enable wol */
1647 if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
1648 amd8111e_enable_magicpkt(lp);
1649 if(lp->options & OPTION_WAKE_PHY_ENABLE)
1650 amd8111e_enable_link_change(lp);
1652 pci_enable_wake(pci_dev, PCI_D3hot, 1);
1653 pci_enable_wake(pci_dev, PCI_D3cold, 1);
1656 else{
1657 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1658 pci_enable_wake(pci_dev, PCI_D3cold, 0);
1661 pci_save_state(pci_dev);
1662 pci_set_power_state(pci_dev, PCI_D3hot);
1664 return 0;
1666 static int amd8111e_resume(struct pci_dev *pci_dev)
1668 struct net_device *dev = pci_get_drvdata(pci_dev);
1669 struct amd8111e_priv *lp = netdev_priv(dev);
1671 if (!netif_running(dev))
1672 return 0;
1674 pci_set_power_state(pci_dev, PCI_D0);
1675 pci_restore_state(pci_dev);
1677 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1678 pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
1680 netif_device_attach(dev);
1682 spin_lock_irq(&lp->lock);
1683 amd8111e_restart(dev);
1684 /* Restart ipg timer */
1685 if(lp->options & OPTION_DYN_IPG_ENABLE)
1686 mod_timer(&lp->ipg_data.ipg_timer,
1687 jiffies + IPG_CONVERGE_JIFFIES);
1688 spin_unlock_irq(&lp->lock);
1690 return 0;
1693 static void amd8111e_config_ipg(struct net_device *dev)
1695 struct amd8111e_priv *lp = netdev_priv(dev);
1696 struct ipg_info *ipg_data = &lp->ipg_data;
1697 void __iomem *mmio = lp->mmio;
1698 unsigned int prev_col_cnt = ipg_data->col_cnt;
1699 unsigned int total_col_cnt;
1700 unsigned int tmp_ipg;
1702 if(lp->link_config.duplex == DUPLEX_FULL){
1703 ipg_data->ipg = DEFAULT_IPG;
1704 return;
1707 if(ipg_data->ipg_state == SSTATE){
1709 if(ipg_data->timer_tick == IPG_STABLE_TIME){
1711 ipg_data->timer_tick = 0;
1712 ipg_data->ipg = MIN_IPG - IPG_STEP;
1713 ipg_data->current_ipg = MIN_IPG;
1714 ipg_data->diff_col_cnt = 0xFFFFFFFF;
1715 ipg_data->ipg_state = CSTATE;
1717 else
1718 ipg_data->timer_tick++;
1721 if(ipg_data->ipg_state == CSTATE){
1723 /* Get the current collision count */
1725 total_col_cnt = ipg_data->col_cnt =
1726 amd8111e_read_mib(mmio, xmt_collisions);
1728 if ((total_col_cnt - prev_col_cnt) <
1729 (ipg_data->diff_col_cnt)){
1731 ipg_data->diff_col_cnt =
1732 total_col_cnt - prev_col_cnt ;
1734 ipg_data->ipg = ipg_data->current_ipg;
1737 ipg_data->current_ipg += IPG_STEP;
1739 if (ipg_data->current_ipg <= MAX_IPG)
1740 tmp_ipg = ipg_data->current_ipg;
1741 else{
1742 tmp_ipg = ipg_data->ipg;
1743 ipg_data->ipg_state = SSTATE;
1745 writew((u32)tmp_ipg, mmio + IPG);
1746 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1748 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1749 return;
1753 static void amd8111e_probe_ext_phy(struct net_device *dev)
1755 struct amd8111e_priv *lp = netdev_priv(dev);
1756 int i;
1758 for (i = 0x1e; i >= 0; i--) {
1759 u32 id1, id2;
1761 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1762 continue;
1763 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1764 continue;
1765 lp->ext_phy_id = (id1 << 16) | id2;
1766 lp->ext_phy_addr = i;
1767 return;
1769 lp->ext_phy_id = 0;
1770 lp->ext_phy_addr = 1;
1773 static const struct net_device_ops amd8111e_netdev_ops = {
1774 .ndo_open = amd8111e_open,
1775 .ndo_stop = amd8111e_close,
1776 .ndo_start_xmit = amd8111e_start_xmit,
1777 .ndo_tx_timeout = amd8111e_tx_timeout,
1778 .ndo_get_stats = amd8111e_get_stats,
1779 .ndo_set_rx_mode = amd8111e_set_multicast_list,
1780 .ndo_validate_addr = eth_validate_addr,
1781 .ndo_set_mac_address = amd8111e_set_mac_address,
1782 .ndo_do_ioctl = amd8111e_ioctl,
1783 .ndo_change_mtu = amd8111e_change_mtu,
1784 #ifdef CONFIG_NET_POLL_CONTROLLER
1785 .ndo_poll_controller = amd8111e_poll,
1786 #endif
1789 static int amd8111e_probe_one(struct pci_dev *pdev,
1790 const struct pci_device_id *ent)
1792 int err, i;
1793 unsigned long reg_addr,reg_len;
1794 struct amd8111e_priv *lp;
1795 struct net_device *dev;
1797 err = pci_enable_device(pdev);
1798 if(err){
1799 dev_err(&pdev->dev, "Cannot enable new PCI device\n");
1800 return err;
1803 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
1804 dev_err(&pdev->dev, "Cannot find PCI base address\n");
1805 err = -ENODEV;
1806 goto err_disable_pdev;
1809 err = pci_request_regions(pdev, MODULE_NAME);
1810 if(err){
1811 dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
1812 goto err_disable_pdev;
1815 pci_set_master(pdev);
1817 /* Find power-management capability. */
1818 if (!pdev->pm_cap) {
1819 dev_err(&pdev->dev, "No Power Management capability\n");
1820 err = -ENODEV;
1821 goto err_free_reg;
1824 /* Initialize DMA */
1825 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
1826 dev_err(&pdev->dev, "DMA not supported\n");
1827 err = -ENODEV;
1828 goto err_free_reg;
1831 reg_addr = pci_resource_start(pdev, 0);
1832 reg_len = pci_resource_len(pdev, 0);
1834 dev = alloc_etherdev(sizeof(struct amd8111e_priv));
1835 if (!dev) {
1836 err = -ENOMEM;
1837 goto err_free_reg;
1840 SET_NETDEV_DEV(dev, &pdev->dev);
1842 #if AMD8111E_VLAN_TAG_USED
1843 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ;
1844 #endif
1846 lp = netdev_priv(dev);
1847 lp->pci_dev = pdev;
1848 lp->amd8111e_net_dev = dev;
1849 lp->pm_cap = pdev->pm_cap;
1851 spin_lock_init(&lp->lock);
1853 lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len);
1854 if (!lp->mmio) {
1855 dev_err(&pdev->dev, "Cannot map device registers\n");
1856 err = -ENOMEM;
1857 goto err_free_dev;
1860 /* Initializing MAC address */
1861 for (i = 0; i < ETH_ALEN; i++)
1862 dev->dev_addr[i] = readb(lp->mmio + PADR + i);
1864 /* Setting user defined parametrs */
1865 lp->ext_phy_option = speed_duplex[card_idx];
1866 if(coalesce[card_idx])
1867 lp->options |= OPTION_INTR_COAL_ENABLE;
1868 if(dynamic_ipg[card_idx++])
1869 lp->options |= OPTION_DYN_IPG_ENABLE;
1872 /* Initialize driver entry points */
1873 dev->netdev_ops = &amd8111e_netdev_ops;
1874 dev->ethtool_ops = &ops;
1875 dev->irq =pdev->irq;
1876 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
1877 netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
1879 #if AMD8111E_VLAN_TAG_USED
1880 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
1881 #endif
1882 /* Probe the external PHY */
1883 amd8111e_probe_ext_phy(dev);
1885 /* setting mii default values */
1886 lp->mii_if.dev = dev;
1887 lp->mii_if.mdio_read = amd8111e_mdio_read;
1888 lp->mii_if.mdio_write = amd8111e_mdio_write;
1889 lp->mii_if.phy_id = lp->ext_phy_addr;
1891 /* Set receive buffer length and set jumbo option*/
1892 amd8111e_set_rx_buff_len(dev);
1895 err = register_netdev(dev);
1896 if (err) {
1897 dev_err(&pdev->dev, "Cannot register net device\n");
1898 goto err_free_dev;
1901 pci_set_drvdata(pdev, dev);
1903 /* Initialize software ipg timer */
1904 if(lp->options & OPTION_DYN_IPG_ENABLE){
1905 init_timer(&lp->ipg_data.ipg_timer);
1906 lp->ipg_data.ipg_timer.data = (unsigned long) dev;
1907 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
1908 lp->ipg_data.ipg_timer.expires = jiffies +
1909 IPG_CONVERGE_JIFFIES;
1910 lp->ipg_data.ipg = DEFAULT_IPG;
1911 lp->ipg_data.ipg_state = CSTATE;
1914 /* display driver and device information */
1915 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
1916 dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS);
1917 dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
1918 chip_version, dev->dev_addr);
1919 if (lp->ext_phy_id)
1920 dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n",
1921 lp->ext_phy_id, lp->ext_phy_addr);
1922 else
1923 dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n");
1925 return 0;
1927 err_free_dev:
1928 free_netdev(dev);
1930 err_free_reg:
1931 pci_release_regions(pdev);
1933 err_disable_pdev:
1934 pci_disable_device(pdev);
1935 return err;
1939 static void amd8111e_remove_one(struct pci_dev *pdev)
1941 struct net_device *dev = pci_get_drvdata(pdev);
1943 if (dev) {
1944 unregister_netdev(dev);
1945 free_netdev(dev);
1946 pci_release_regions(pdev);
1947 pci_disable_device(pdev);
1951 static const struct pci_device_id amd8111e_pci_tbl[] = {
1953 .vendor = PCI_VENDOR_ID_AMD,
1954 .device = PCI_DEVICE_ID_AMD8111E_7462,
1957 .vendor = 0,
1960 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
1962 static struct pci_driver amd8111e_driver = {
1963 .name = MODULE_NAME,
1964 .id_table = amd8111e_pci_tbl,
1965 .probe = amd8111e_probe_one,
1966 .remove = amd8111e_remove_one,
1967 .suspend = amd8111e_suspend,
1968 .resume = amd8111e_resume
1971 module_pci_driver(amd8111e_driver);