perf tools: Improve 'libbabel' feature check failure message
[linux/fpc-iii.git] / arch / blackfin / mach-common / clocks-init.c
blobd436bd907fc8c6e036a16b9f57241121cc5a0f2e
1 /*
2 * arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory
4 * Copyright 2004-2008 Analog Devices Inc.
6 * Licensed under the GPL-2 or later.
7 */
9 #include <linux/linkage.h>
10 #include <asm/blackfin.h>
12 #include <asm/dma.h>
13 #include <asm/clocks.h>
14 #include <asm/mem_init.h>
15 #include <asm/dpmc.h>
17 #ifdef CONFIG_BF60x
19 #define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF)
20 #define CGU_DIV_VAL \
21 ((CONFIG_CCLK_DIV << CSEL_OFFSET) | \
22 (CONFIG_SCLK_DIV << SYSSEL_OFFSET) | \
23 (CONFIG_SCLK0_DIV << S0SEL_OFFSET) | \
24 (CONFIG_SCLK1_DIV << S1SEL_OFFSET) | \
25 (CONFIG_DCLK_DIV << DSEL_OFFSET))
27 #define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000)
28 #if ((CONFIG_BFIN_DCLK != 125) && \
29 (CONFIG_BFIN_DCLK != 133) && (CONFIG_BFIN_DCLK != 150) && \
30 (CONFIG_BFIN_DCLK != 166) && (CONFIG_BFIN_DCLK != 200) && \
31 (CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250))
32 #error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz"
33 #endif
35 #else
36 #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
37 #define PLL_CTL_VAL \
38 (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
39 (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
40 #endif
42 __attribute__((l1_text))
43 static void do_sync(void)
45 __builtin_bfin_ssync();
48 __attribute__((l1_text))
49 void init_clocks(void)
51 /* Kill any active DMAs as they may trigger external memory accesses
52 * in the middle of reprogramming things, and that'll screw us up.
53 * For example, any automatic DMAs left by U-Boot for splash screens.
55 #ifdef CONFIG_BF60x
56 init_cgu(CGU_DIV_VAL, CGU_CTL_VAL);
57 init_dmc(CONFIG_BFIN_DCLK);
58 #else
59 size_t i;
60 for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
61 struct dma_register *dma = dma_io_base_addr[i];
62 dma->cfg = 0;
65 do_sync();
67 #ifdef SIC_IWR0
68 bfin_write_SIC_IWR0(IWR_ENABLE(0));
69 # ifdef SIC_IWR1
70 /* BF52x system reset does not properly reset SIC_IWR1 which
71 * will screw up the bootrom as it relies on MDMA0/1 waking it
72 * up from IDLE instructions. See this report for more info:
73 * http://blackfin.uclinux.org/gf/tracker/4323
75 if (ANOMALY_05000435)
76 bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
77 else
78 bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
79 # endif
80 # ifdef SIC_IWR2
81 bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
82 # endif
83 #else
84 bfin_write_SIC_IWR(IWR_ENABLE(0));
85 #endif
86 do_sync();
87 #ifdef EBIU_SDGCTL
88 bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
89 do_sync();
90 #endif
92 #ifdef CLKBUFOE
93 bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE);
94 do_sync();
95 __asm__ __volatile__("IDLE;");
96 #endif
97 bfin_write_PLL_LOCKCNT(0x300);
98 do_sync();
99 /* We always write PLL_CTL thus avoiding Anomaly 05000242 */
100 bfin_write16(PLL_CTL, PLL_CTL_VAL);
101 __asm__ __volatile__("IDLE;");
102 bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
103 #ifdef EBIU_SDGCTL
104 bfin_write_EBIU_SDRRC(mem_SDRRC);
105 bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
106 #else
107 bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
108 do_sync();
109 bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1);
110 bfin_write_EBIU_DDRCTL0(mem_DDRCTL0);
111 bfin_write_EBIU_DDRCTL1(mem_DDRCTL1);
112 bfin_write_EBIU_DDRCTL2(mem_DDRCTL2);
113 #ifdef CONFIG_MEM_EBIU_DDRQUE
114 bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE);
115 #endif
116 #endif
117 #endif
118 do_sync();
119 bfin_read16(0);