2 * bcm.c - Broadcast Manager to filter/send (cyclic) CAN content
4 * Copyright (c) 2002-2017 Volkswagen Group Electronic Research
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of Volkswagen nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * Alternatively, provided that this notice is retained in full, this
20 * software may be distributed under the terms of the GNU General
21 * Public License ("GPL") version 2, in which case the provisions of the
22 * GPL apply INSTEAD OF those given above.
24 * The provided data structures and external interfaces from this code
25 * are not restricted to be used by modules with a GPL compatible license.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
42 #include <linux/module.h>
43 #include <linux/init.h>
44 #include <linux/interrupt.h>
45 #include <linux/hrtimer.h>
46 #include <linux/list.h>
47 #include <linux/proc_fs.h>
48 #include <linux/seq_file.h>
49 #include <linux/uio.h>
50 #include <linux/net.h>
51 #include <linux/netdevice.h>
52 #include <linux/socket.h>
53 #include <linux/if_arp.h>
54 #include <linux/skbuff.h>
55 #include <linux/can.h>
56 #include <linux/can/core.h>
57 #include <linux/can/skb.h>
58 #include <linux/can/bcm.h>
59 #include <linux/slab.h>
61 #include <net/net_namespace.h>
64 * To send multiple CAN frame content within TX_SETUP or to filter
65 * CAN messages with multiplex index within RX_SETUP, the number of
66 * different filters is limited to 256 due to the one byte index value.
68 #define MAX_NFRAMES 256
70 /* use of last_frames[index].flags */
71 #define RX_RECV 0x40 /* received data for this element */
72 #define RX_THR 0x80 /* element not been sent due to throttle feature */
73 #define BCM_CAN_FLAGS_MASK 0x3F /* to clean private flags after usage */
75 /* get best masking value for can_rx_register() for a given single can_id */
76 #define REGMASK(id) ((id & CAN_EFF_FLAG) ? \
77 (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG) : \
78 (CAN_SFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG))
80 #define CAN_BCM_VERSION "20170425"
82 MODULE_DESCRIPTION("PF_CAN broadcast manager protocol");
83 MODULE_LICENSE("Dual BSD/GPL");
84 MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
85 MODULE_ALIAS("can-proto-2");
88 * easy access to the first 64 bit of can(fd)_frame payload. cp->data is
89 * 64 bit aligned so the offset has to be multiples of 8 which is ensured
90 * by the only callers in bcm_rx_cmp_to_index() bcm_rx_handler().
92 static inline u64
get_u64(const struct canfd_frame
*cp
, int offset
)
94 return *(u64
*)(cp
->data
+ offset
);
98 struct list_head list
;
102 unsigned long frames_abs
, frames_filtered
;
103 struct bcm_timeval ival1
, ival2
;
104 struct hrtimer timer
, thrtimer
;
105 struct tasklet_struct tsklet
, thrtsklet
;
106 ktime_t rx_stamp
, kt_ival1
, kt_ival2
, kt_lastmsg
;
112 /* void pointers to arrays of struct can[fd]_frame */
115 struct canfd_frame sframe
;
116 struct canfd_frame last_sframe
;
118 struct net_device
*rx_reg_dev
;
125 struct notifier_block notifier
;
126 struct list_head rx_ops
;
127 struct list_head tx_ops
;
128 unsigned long dropped_usr_msgs
;
129 struct proc_dir_entry
*bcm_proc_read
;
130 char procname
[32]; /* inode number in decimal with \0 */
133 static inline struct bcm_sock
*bcm_sk(const struct sock
*sk
)
135 return (struct bcm_sock
*)sk
;
138 static inline ktime_t
bcm_timeval_to_ktime(struct bcm_timeval tv
)
140 return ktime_set(tv
.tv_sec
, tv
.tv_usec
* NSEC_PER_USEC
);
143 #define CFSIZ(flags) ((flags & CAN_FD_FRAME) ? CANFD_MTU : CAN_MTU)
144 #define OPSIZ sizeof(struct bcm_op)
145 #define MHSIZ sizeof(struct bcm_msg_head)
150 #if IS_ENABLED(CONFIG_PROC_FS)
151 static char *bcm_proc_getifname(struct net
*net
, char *result
, int ifindex
)
153 struct net_device
*dev
;
159 dev
= dev_get_by_index_rcu(net
, ifindex
);
161 strcpy(result
, dev
->name
);
163 strcpy(result
, "???");
169 static int bcm_proc_show(struct seq_file
*m
, void *v
)
171 char ifname
[IFNAMSIZ
];
172 struct net
*net
= m
->private;
173 struct sock
*sk
= (struct sock
*)PDE_DATA(m
->file
->f_inode
);
174 struct bcm_sock
*bo
= bcm_sk(sk
);
177 seq_printf(m
, ">>> socket %pK", sk
->sk_socket
);
178 seq_printf(m
, " / sk %pK", sk
);
179 seq_printf(m
, " / bo %pK", bo
);
180 seq_printf(m
, " / dropped %lu", bo
->dropped_usr_msgs
);
181 seq_printf(m
, " / bound %s", bcm_proc_getifname(net
, ifname
, bo
->ifindex
));
182 seq_printf(m
, " <<<\n");
184 list_for_each_entry(op
, &bo
->rx_ops
, list
) {
186 unsigned long reduction
;
188 /* print only active entries & prevent division by zero */
192 seq_printf(m
, "rx_op: %03X %-5s ", op
->can_id
,
193 bcm_proc_getifname(net
, ifname
, op
->ifindex
));
195 if (op
->flags
& CAN_FD_FRAME
)
196 seq_printf(m
, "(%u)", op
->nframes
);
198 seq_printf(m
, "[%u]", op
->nframes
);
200 seq_printf(m
, "%c ", (op
->flags
& RX_CHECK_DLC
) ? 'd' : ' ');
203 seq_printf(m
, "timeo=%lld ",
204 (long long)ktime_to_us(op
->kt_ival1
));
207 seq_printf(m
, "thr=%lld ",
208 (long long)ktime_to_us(op
->kt_ival2
));
210 seq_printf(m
, "# recv %ld (%ld) => reduction: ",
211 op
->frames_filtered
, op
->frames_abs
);
213 reduction
= 100 - (op
->frames_filtered
* 100) / op
->frames_abs
;
215 seq_printf(m
, "%s%ld%%\n",
216 (reduction
== 100) ? "near " : "", reduction
);
219 list_for_each_entry(op
, &bo
->tx_ops
, list
) {
221 seq_printf(m
, "tx_op: %03X %s ", op
->can_id
,
222 bcm_proc_getifname(net
, ifname
, op
->ifindex
));
224 if (op
->flags
& CAN_FD_FRAME
)
225 seq_printf(m
, "(%u) ", op
->nframes
);
227 seq_printf(m
, "[%u] ", op
->nframes
);
230 seq_printf(m
, "t1=%lld ",
231 (long long)ktime_to_us(op
->kt_ival1
));
234 seq_printf(m
, "t2=%lld ",
235 (long long)ktime_to_us(op
->kt_ival2
));
237 seq_printf(m
, "# sent %ld\n", op
->frames_abs
);
243 static int bcm_proc_open(struct inode
*inode
, struct file
*file
)
245 return single_open_net(inode
, file
, bcm_proc_show
);
248 static const struct file_operations bcm_proc_fops
= {
249 .owner
= THIS_MODULE
,
250 .open
= bcm_proc_open
,
253 .release
= single_release
,
255 #endif /* CONFIG_PROC_FS */
258 * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface
259 * of the given bcm tx op
261 static void bcm_can_tx(struct bcm_op
*op
)
264 struct net_device
*dev
;
265 struct canfd_frame
*cf
= op
->frames
+ op
->cfsiz
* op
->currframe
;
267 /* no target device? => exit */
271 dev
= dev_get_by_index(sock_net(op
->sk
), op
->ifindex
);
273 /* RFC: should this bcm_op remove itself here? */
277 skb
= alloc_skb(op
->cfsiz
+ sizeof(struct can_skb_priv
), gfp_any());
281 can_skb_reserve(skb
);
282 can_skb_prv(skb
)->ifindex
= dev
->ifindex
;
283 can_skb_prv(skb
)->skbcnt
= 0;
285 memcpy(skb_put(skb
, op
->cfsiz
), cf
, op
->cfsiz
);
287 /* send with loopback */
289 can_skb_set_owner(skb
, op
->sk
);
292 /* update statistics */
296 /* reached last frame? */
297 if (op
->currframe
>= op
->nframes
)
304 * bcm_send_to_user - send a BCM message to the userspace
305 * (consisting of bcm_msg_head + x CAN frames)
307 static void bcm_send_to_user(struct bcm_op
*op
, struct bcm_msg_head
*head
,
308 struct canfd_frame
*frames
, int has_timestamp
)
311 struct canfd_frame
*firstframe
;
312 struct sockaddr_can
*addr
;
313 struct sock
*sk
= op
->sk
;
314 unsigned int datalen
= head
->nframes
* op
->cfsiz
;
317 skb
= alloc_skb(sizeof(*head
) + datalen
, gfp_any());
321 memcpy(skb_put(skb
, sizeof(*head
)), head
, sizeof(*head
));
324 /* CAN frames starting here */
325 firstframe
= (struct canfd_frame
*)skb_tail_pointer(skb
);
327 memcpy(skb_put(skb
, datalen
), frames
, datalen
);
330 * the BCM uses the flags-element of the canfd_frame
331 * structure for internal purposes. This is only
332 * relevant for updates that are generated by the
333 * BCM, where nframes is 1
335 if (head
->nframes
== 1)
336 firstframe
->flags
&= BCM_CAN_FLAGS_MASK
;
340 /* restore rx timestamp */
341 skb
->tstamp
= op
->rx_stamp
;
345 * Put the datagram to the queue so that bcm_recvmsg() can
346 * get it from there. We need to pass the interface index to
347 * bcm_recvmsg(). We pass a whole struct sockaddr_can in skb->cb
348 * containing the interface index.
351 sock_skb_cb_check_size(sizeof(struct sockaddr_can
));
352 addr
= (struct sockaddr_can
*)skb
->cb
;
353 memset(addr
, 0, sizeof(*addr
));
354 addr
->can_family
= AF_CAN
;
355 addr
->can_ifindex
= op
->rx_ifindex
;
357 err
= sock_queue_rcv_skb(sk
, skb
);
359 struct bcm_sock
*bo
= bcm_sk(sk
);
362 /* don't care about overflows in this statistic */
363 bo
->dropped_usr_msgs
++;
367 static void bcm_tx_start_timer(struct bcm_op
*op
)
369 if (op
->kt_ival1
&& op
->count
)
370 hrtimer_start(&op
->timer
,
371 ktime_add(ktime_get(), op
->kt_ival1
),
373 else if (op
->kt_ival2
)
374 hrtimer_start(&op
->timer
,
375 ktime_add(ktime_get(), op
->kt_ival2
),
379 static void bcm_tx_timeout_tsklet(unsigned long data
)
381 struct bcm_op
*op
= (struct bcm_op
*)data
;
382 struct bcm_msg_head msg_head
;
384 if (op
->kt_ival1
&& (op
->count
> 0)) {
387 if (!op
->count
&& (op
->flags
& TX_COUNTEVT
)) {
389 /* create notification to user */
390 msg_head
.opcode
= TX_EXPIRED
;
391 msg_head
.flags
= op
->flags
;
392 msg_head
.count
= op
->count
;
393 msg_head
.ival1
= op
->ival1
;
394 msg_head
.ival2
= op
->ival2
;
395 msg_head
.can_id
= op
->can_id
;
396 msg_head
.nframes
= 0;
398 bcm_send_to_user(op
, &msg_head
, NULL
, 0);
402 } else if (op
->kt_ival2
)
405 bcm_tx_start_timer(op
);
409 * bcm_tx_timeout_handler - performs cyclic CAN frame transmissions
411 static enum hrtimer_restart
bcm_tx_timeout_handler(struct hrtimer
*hrtimer
)
413 struct bcm_op
*op
= container_of(hrtimer
, struct bcm_op
, timer
);
415 tasklet_schedule(&op
->tsklet
);
417 return HRTIMER_NORESTART
;
421 * bcm_rx_changed - create a RX_CHANGED notification due to changed content
423 static void bcm_rx_changed(struct bcm_op
*op
, struct canfd_frame
*data
)
425 struct bcm_msg_head head
;
427 /* update statistics */
428 op
->frames_filtered
++;
430 /* prevent statistics overflow */
431 if (op
->frames_filtered
> ULONG_MAX
/100)
432 op
->frames_filtered
= op
->frames_abs
= 0;
434 /* this element is not throttled anymore */
435 data
->flags
&= (BCM_CAN_FLAGS_MASK
|RX_RECV
);
437 head
.opcode
= RX_CHANGED
;
438 head
.flags
= op
->flags
;
439 head
.count
= op
->count
;
440 head
.ival1
= op
->ival1
;
441 head
.ival2
= op
->ival2
;
442 head
.can_id
= op
->can_id
;
445 bcm_send_to_user(op
, &head
, data
, 1);
449 * bcm_rx_update_and_send - process a detected relevant receive content change
450 * 1. update the last received data
451 * 2. send a notification to the user (if possible)
453 static void bcm_rx_update_and_send(struct bcm_op
*op
,
454 struct canfd_frame
*lastdata
,
455 const struct canfd_frame
*rxdata
)
457 memcpy(lastdata
, rxdata
, op
->cfsiz
);
459 /* mark as used and throttled by default */
460 lastdata
->flags
|= (RX_RECV
|RX_THR
);
462 /* throttling mode inactive ? */
464 /* send RX_CHANGED to the user immediately */
465 bcm_rx_changed(op
, lastdata
);
469 /* with active throttling timer we are just done here */
470 if (hrtimer_active(&op
->thrtimer
))
473 /* first reception with enabled throttling mode */
475 goto rx_changed_settime
;
477 /* got a second frame inside a potential throttle period? */
478 if (ktime_us_delta(ktime_get(), op
->kt_lastmsg
) <
479 ktime_to_us(op
->kt_ival2
)) {
480 /* do not send the saved data - only start throttle timer */
481 hrtimer_start(&op
->thrtimer
,
482 ktime_add(op
->kt_lastmsg
, op
->kt_ival2
),
487 /* the gap was that big, that throttling was not needed here */
489 bcm_rx_changed(op
, lastdata
);
490 op
->kt_lastmsg
= ktime_get();
494 * bcm_rx_cmp_to_index - (bit)compares the currently received data to formerly
495 * received data stored in op->last_frames[]
497 static void bcm_rx_cmp_to_index(struct bcm_op
*op
, unsigned int index
,
498 const struct canfd_frame
*rxdata
)
500 struct canfd_frame
*cf
= op
->frames
+ op
->cfsiz
* index
;
501 struct canfd_frame
*lcf
= op
->last_frames
+ op
->cfsiz
* index
;
505 * no one uses the MSBs of flags for comparison,
506 * so we use it here to detect the first time of reception
509 if (!(lcf
->flags
& RX_RECV
)) {
510 /* received data for the first time => send update to user */
511 bcm_rx_update_and_send(op
, lcf
, rxdata
);
515 /* do a real check in CAN frame data section */
516 for (i
= 0; i
< rxdata
->len
; i
+= 8) {
517 if ((get_u64(cf
, i
) & get_u64(rxdata
, i
)) !=
518 (get_u64(cf
, i
) & get_u64(lcf
, i
))) {
519 bcm_rx_update_and_send(op
, lcf
, rxdata
);
524 if (op
->flags
& RX_CHECK_DLC
) {
525 /* do a real check in CAN frame length */
526 if (rxdata
->len
!= lcf
->len
) {
527 bcm_rx_update_and_send(op
, lcf
, rxdata
);
534 * bcm_rx_starttimer - enable timeout monitoring for CAN frame reception
536 static void bcm_rx_starttimer(struct bcm_op
*op
)
538 if (op
->flags
& RX_NO_AUTOTIMER
)
542 hrtimer_start(&op
->timer
, op
->kt_ival1
, HRTIMER_MODE_REL
);
545 static void bcm_rx_timeout_tsklet(unsigned long data
)
547 struct bcm_op
*op
= (struct bcm_op
*)data
;
548 struct bcm_msg_head msg_head
;
550 /* create notification to user */
551 msg_head
.opcode
= RX_TIMEOUT
;
552 msg_head
.flags
= op
->flags
;
553 msg_head
.count
= op
->count
;
554 msg_head
.ival1
= op
->ival1
;
555 msg_head
.ival2
= op
->ival2
;
556 msg_head
.can_id
= op
->can_id
;
557 msg_head
.nframes
= 0;
559 bcm_send_to_user(op
, &msg_head
, NULL
, 0);
563 * bcm_rx_timeout_handler - when the (cyclic) CAN frame reception timed out
565 static enum hrtimer_restart
bcm_rx_timeout_handler(struct hrtimer
*hrtimer
)
567 struct bcm_op
*op
= container_of(hrtimer
, struct bcm_op
, timer
);
569 /* schedule before NET_RX_SOFTIRQ */
570 tasklet_hi_schedule(&op
->tsklet
);
572 /* no restart of the timer is done here! */
574 /* if user wants to be informed, when cyclic CAN-Messages come back */
575 if ((op
->flags
& RX_ANNOUNCE_RESUME
) && op
->last_frames
) {
576 /* clear received CAN frames to indicate 'nothing received' */
577 memset(op
->last_frames
, 0, op
->nframes
* op
->cfsiz
);
580 return HRTIMER_NORESTART
;
584 * bcm_rx_do_flush - helper for bcm_rx_thr_flush
586 static inline int bcm_rx_do_flush(struct bcm_op
*op
, int update
,
589 struct canfd_frame
*lcf
= op
->last_frames
+ op
->cfsiz
* index
;
591 if ((op
->last_frames
) && (lcf
->flags
& RX_THR
)) {
593 bcm_rx_changed(op
, lcf
);
600 * bcm_rx_thr_flush - Check for throttled data and send it to the userspace
602 * update == 0 : just check if throttled data is available (any irq context)
603 * update == 1 : check and send throttled data to userspace (soft_irq context)
605 static int bcm_rx_thr_flush(struct bcm_op
*op
, int update
)
609 if (op
->nframes
> 1) {
612 /* for MUX filter we start at index 1 */
613 for (i
= 1; i
< op
->nframes
; i
++)
614 updated
+= bcm_rx_do_flush(op
, update
, i
);
617 /* for RX_FILTER_ID and simple filter */
618 updated
+= bcm_rx_do_flush(op
, update
, 0);
624 static void bcm_rx_thr_tsklet(unsigned long data
)
626 struct bcm_op
*op
= (struct bcm_op
*)data
;
628 /* push the changed data to the userspace */
629 bcm_rx_thr_flush(op
, 1);
633 * bcm_rx_thr_handler - the time for blocked content updates is over now:
634 * Check for throttled data and send it to the userspace
636 static enum hrtimer_restart
bcm_rx_thr_handler(struct hrtimer
*hrtimer
)
638 struct bcm_op
*op
= container_of(hrtimer
, struct bcm_op
, thrtimer
);
640 tasklet_schedule(&op
->thrtsklet
);
642 if (bcm_rx_thr_flush(op
, 0)) {
643 hrtimer_forward(hrtimer
, ktime_get(), op
->kt_ival2
);
644 return HRTIMER_RESTART
;
646 /* rearm throttle handling */
648 return HRTIMER_NORESTART
;
653 * bcm_rx_handler - handle a CAN frame reception
655 static void bcm_rx_handler(struct sk_buff
*skb
, void *data
)
657 struct bcm_op
*op
= (struct bcm_op
*)data
;
658 const struct canfd_frame
*rxframe
= (struct canfd_frame
*)skb
->data
;
661 if (op
->can_id
!= rxframe
->can_id
)
664 /* make sure to handle the correct frame type (CAN / CAN FD) */
665 if (skb
->len
!= op
->cfsiz
)
668 /* disable timeout */
669 hrtimer_cancel(&op
->timer
);
671 /* save rx timestamp */
672 op
->rx_stamp
= skb
->tstamp
;
673 /* save originator for recvfrom() */
674 op
->rx_ifindex
= skb
->dev
->ifindex
;
675 /* update statistics */
678 if (op
->flags
& RX_RTR_FRAME
) {
679 /* send reply for RTR-request (placed in op->frames[0]) */
684 if (op
->flags
& RX_FILTER_ID
) {
685 /* the easiest case */
686 bcm_rx_update_and_send(op
, op
->last_frames
, rxframe
);
690 if (op
->nframes
== 1) {
691 /* simple compare with index 0 */
692 bcm_rx_cmp_to_index(op
, 0, rxframe
);
696 if (op
->nframes
> 1) {
700 * find the first multiplex mask that fits.
701 * Remark: The MUX-mask is stored in index 0 - but only the
702 * first 64 bits of the frame data[] are relevant (CAN FD)
705 for (i
= 1; i
< op
->nframes
; i
++) {
706 if ((get_u64(op
->frames
, 0) & get_u64(rxframe
, 0)) ==
707 (get_u64(op
->frames
, 0) &
708 get_u64(op
->frames
+ op
->cfsiz
* i
, 0))) {
709 bcm_rx_cmp_to_index(op
, i
, rxframe
);
716 bcm_rx_starttimer(op
);
720 * helpers for bcm_op handling: find & delete bcm [rx|tx] op elements
722 static struct bcm_op
*bcm_find_op(struct list_head
*ops
,
723 struct bcm_msg_head
*mh
, int ifindex
)
727 list_for_each_entry(op
, ops
, list
) {
728 if ((op
->can_id
== mh
->can_id
) && (op
->ifindex
== ifindex
) &&
729 (op
->flags
& CAN_FD_FRAME
) == (mh
->flags
& CAN_FD_FRAME
))
736 static void bcm_remove_op(struct bcm_op
*op
)
738 if (op
->tsklet
.func
) {
739 while (test_bit(TASKLET_STATE_SCHED
, &op
->tsklet
.state
) ||
740 test_bit(TASKLET_STATE_RUN
, &op
->tsklet
.state
) ||
741 hrtimer_active(&op
->timer
)) {
742 hrtimer_cancel(&op
->timer
);
743 tasklet_kill(&op
->tsklet
);
747 if (op
->thrtsklet
.func
) {
748 while (test_bit(TASKLET_STATE_SCHED
, &op
->thrtsklet
.state
) ||
749 test_bit(TASKLET_STATE_RUN
, &op
->thrtsklet
.state
) ||
750 hrtimer_active(&op
->thrtimer
)) {
751 hrtimer_cancel(&op
->thrtimer
);
752 tasklet_kill(&op
->thrtsklet
);
756 if ((op
->frames
) && (op
->frames
!= &op
->sframe
))
759 if ((op
->last_frames
) && (op
->last_frames
!= &op
->last_sframe
))
760 kfree(op
->last_frames
);
765 static void bcm_rx_unreg(struct net_device
*dev
, struct bcm_op
*op
)
767 if (op
->rx_reg_dev
== dev
) {
768 can_rx_unregister(dev_net(dev
), dev
, op
->can_id
,
769 REGMASK(op
->can_id
), bcm_rx_handler
, op
);
771 /* mark as removed subscription */
772 op
->rx_reg_dev
= NULL
;
774 printk(KERN_ERR
"can-bcm: bcm_rx_unreg: registered device "
775 "mismatch %p %p\n", op
->rx_reg_dev
, dev
);
779 * bcm_delete_rx_op - find and remove a rx op (returns number of removed ops)
781 static int bcm_delete_rx_op(struct list_head
*ops
, struct bcm_msg_head
*mh
,
784 struct bcm_op
*op
, *n
;
786 list_for_each_entry_safe(op
, n
, ops
, list
) {
787 if ((op
->can_id
== mh
->can_id
) && (op
->ifindex
== ifindex
) &&
788 (op
->flags
& CAN_FD_FRAME
) == (mh
->flags
& CAN_FD_FRAME
)) {
791 * Don't care if we're bound or not (due to netdev
792 * problems) can_rx_unregister() is always a save
797 * Only remove subscriptions that had not
798 * been removed due to NETDEV_UNREGISTER
801 if (op
->rx_reg_dev
) {
802 struct net_device
*dev
;
804 dev
= dev_get_by_index(sock_net(op
->sk
),
807 bcm_rx_unreg(dev
, op
);
812 can_rx_unregister(sock_net(op
->sk
), NULL
,
823 return 0; /* not found */
827 * bcm_delete_tx_op - find and remove a tx op (returns number of removed ops)
829 static int bcm_delete_tx_op(struct list_head
*ops
, struct bcm_msg_head
*mh
,
832 struct bcm_op
*op
, *n
;
834 list_for_each_entry_safe(op
, n
, ops
, list
) {
835 if ((op
->can_id
== mh
->can_id
) && (op
->ifindex
== ifindex
) &&
836 (op
->flags
& CAN_FD_FRAME
) == (mh
->flags
& CAN_FD_FRAME
)) {
843 return 0; /* not found */
847 * bcm_read_op - read out a bcm_op and send it to the user (for bcm_sendmsg)
849 static int bcm_read_op(struct list_head
*ops
, struct bcm_msg_head
*msg_head
,
852 struct bcm_op
*op
= bcm_find_op(ops
, msg_head
, ifindex
);
857 /* put current values into msg_head */
858 msg_head
->flags
= op
->flags
;
859 msg_head
->count
= op
->count
;
860 msg_head
->ival1
= op
->ival1
;
861 msg_head
->ival2
= op
->ival2
;
862 msg_head
->nframes
= op
->nframes
;
864 bcm_send_to_user(op
, msg_head
, op
->frames
, 0);
870 * bcm_tx_setup - create or update a bcm tx op (for bcm_sendmsg)
872 static int bcm_tx_setup(struct bcm_msg_head
*msg_head
, struct msghdr
*msg
,
873 int ifindex
, struct sock
*sk
)
875 struct bcm_sock
*bo
= bcm_sk(sk
);
877 struct canfd_frame
*cf
;
881 /* we need a real device to send frames */
885 /* check nframes boundaries - we need at least one CAN frame */
886 if (msg_head
->nframes
< 1 || msg_head
->nframes
> MAX_NFRAMES
)
889 /* check the given can_id */
890 op
= bcm_find_op(&bo
->tx_ops
, msg_head
, ifindex
);
892 /* update existing BCM operation */
895 * Do we need more space for the CAN frames than currently
896 * allocated? -> This is a _really_ unusual use-case and
897 * therefore (complexity / locking) it is not supported.
899 if (msg_head
->nframes
> op
->nframes
)
902 /* update CAN frames content */
903 for (i
= 0; i
< msg_head
->nframes
; i
++) {
905 cf
= op
->frames
+ op
->cfsiz
* i
;
906 err
= memcpy_from_msg((u8
*)cf
, msg
, op
->cfsiz
);
908 if (op
->flags
& CAN_FD_FRAME
) {
919 if (msg_head
->flags
& TX_CP_CAN_ID
) {
920 /* copy can_id into frame */
921 cf
->can_id
= msg_head
->can_id
;
924 op
->flags
= msg_head
->flags
;
927 /* insert new BCM operation for the given can_id */
929 op
= kzalloc(OPSIZ
, GFP_KERNEL
);
933 op
->can_id
= msg_head
->can_id
;
934 op
->cfsiz
= CFSIZ(msg_head
->flags
);
935 op
->flags
= msg_head
->flags
;
937 /* create array for CAN frames and copy the data */
938 if (msg_head
->nframes
> 1) {
939 op
->frames
= kmalloc(msg_head
->nframes
* op
->cfsiz
,
946 op
->frames
= &op
->sframe
;
948 for (i
= 0; i
< msg_head
->nframes
; i
++) {
950 cf
= op
->frames
+ op
->cfsiz
* i
;
951 err
= memcpy_from_msg((u8
*)cf
, msg
, op
->cfsiz
);
953 if (op
->flags
& CAN_FD_FRAME
) {
962 if (op
->frames
!= &op
->sframe
)
968 if (msg_head
->flags
& TX_CP_CAN_ID
) {
969 /* copy can_id into frame */
970 cf
->can_id
= msg_head
->can_id
;
974 /* tx_ops never compare with previous received messages */
975 op
->last_frames
= NULL
;
977 /* bcm_can_tx / bcm_tx_timeout_handler needs this */
979 op
->ifindex
= ifindex
;
981 /* initialize uninitialized (kzalloc) structure */
982 hrtimer_init(&op
->timer
, CLOCK_MONOTONIC
, HRTIMER_MODE_REL
);
983 op
->timer
.function
= bcm_tx_timeout_handler
;
985 /* initialize tasklet for tx countevent notification */
986 tasklet_init(&op
->tsklet
, bcm_tx_timeout_tsklet
,
989 /* currently unused in tx_ops */
990 hrtimer_init(&op
->thrtimer
, CLOCK_MONOTONIC
, HRTIMER_MODE_REL
);
992 /* add this bcm_op to the list of the tx_ops */
993 list_add(&op
->list
, &bo
->tx_ops
);
995 } /* if ((op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex))) */
997 if (op
->nframes
!= msg_head
->nframes
) {
998 op
->nframes
= msg_head
->nframes
;
999 /* start multiple frame transmission with index 0 */
1005 if (op
->flags
& TX_RESET_MULTI_IDX
) {
1006 /* start multiple frame transmission with index 0 */
1010 if (op
->flags
& SETTIMER
) {
1011 /* set timer values */
1012 op
->count
= msg_head
->count
;
1013 op
->ival1
= msg_head
->ival1
;
1014 op
->ival2
= msg_head
->ival2
;
1015 op
->kt_ival1
= bcm_timeval_to_ktime(msg_head
->ival1
);
1016 op
->kt_ival2
= bcm_timeval_to_ktime(msg_head
->ival2
);
1018 /* disable an active timer due to zero values? */
1019 if (!op
->kt_ival1
&& !op
->kt_ival2
)
1020 hrtimer_cancel(&op
->timer
);
1023 if (op
->flags
& STARTTIMER
) {
1024 hrtimer_cancel(&op
->timer
);
1025 /* spec: send CAN frame when starting timer */
1026 op
->flags
|= TX_ANNOUNCE
;
1029 if (op
->flags
& TX_ANNOUNCE
) {
1035 if (op
->flags
& STARTTIMER
)
1036 bcm_tx_start_timer(op
);
1038 return msg_head
->nframes
* op
->cfsiz
+ MHSIZ
;
1042 * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg)
1044 static int bcm_rx_setup(struct bcm_msg_head
*msg_head
, struct msghdr
*msg
,
1045 int ifindex
, struct sock
*sk
)
1047 struct bcm_sock
*bo
= bcm_sk(sk
);
1052 if ((msg_head
->flags
& RX_FILTER_ID
) || (!(msg_head
->nframes
))) {
1053 /* be robust against wrong usage ... */
1054 msg_head
->flags
|= RX_FILTER_ID
;
1055 /* ignore trailing garbage */
1056 msg_head
->nframes
= 0;
1059 /* the first element contains the mux-mask => MAX_NFRAMES + 1 */
1060 if (msg_head
->nframes
> MAX_NFRAMES
+ 1)
1063 if ((msg_head
->flags
& RX_RTR_FRAME
) &&
1064 ((msg_head
->nframes
!= 1) ||
1065 (!(msg_head
->can_id
& CAN_RTR_FLAG
))))
1068 /* check the given can_id */
1069 op
= bcm_find_op(&bo
->rx_ops
, msg_head
, ifindex
);
1071 /* update existing BCM operation */
1074 * Do we need more space for the CAN frames than currently
1075 * allocated? -> This is a _really_ unusual use-case and
1076 * therefore (complexity / locking) it is not supported.
1078 if (msg_head
->nframes
> op
->nframes
)
1081 if (msg_head
->nframes
) {
1082 /* update CAN frames content */
1083 err
= memcpy_from_msg(op
->frames
, msg
,
1084 msg_head
->nframes
* op
->cfsiz
);
1088 /* clear last_frames to indicate 'nothing received' */
1089 memset(op
->last_frames
, 0, msg_head
->nframes
* op
->cfsiz
);
1092 op
->nframes
= msg_head
->nframes
;
1093 op
->flags
= msg_head
->flags
;
1095 /* Only an update -> do not call can_rx_register() */
1099 /* insert new BCM operation for the given can_id */
1100 op
= kzalloc(OPSIZ
, GFP_KERNEL
);
1104 op
->can_id
= msg_head
->can_id
;
1105 op
->nframes
= msg_head
->nframes
;
1106 op
->cfsiz
= CFSIZ(msg_head
->flags
);
1107 op
->flags
= msg_head
->flags
;
1109 if (msg_head
->nframes
> 1) {
1110 /* create array for CAN frames and copy the data */
1111 op
->frames
= kmalloc(msg_head
->nframes
* op
->cfsiz
,
1118 /* create and init array for received CAN frames */
1119 op
->last_frames
= kzalloc(msg_head
->nframes
* op
->cfsiz
,
1121 if (!op
->last_frames
) {
1128 op
->frames
= &op
->sframe
;
1129 op
->last_frames
= &op
->last_sframe
;
1132 if (msg_head
->nframes
) {
1133 err
= memcpy_from_msg(op
->frames
, msg
,
1134 msg_head
->nframes
* op
->cfsiz
);
1136 if (op
->frames
!= &op
->sframe
)
1138 if (op
->last_frames
!= &op
->last_sframe
)
1139 kfree(op
->last_frames
);
1145 /* bcm_can_tx / bcm_tx_timeout_handler needs this */
1147 op
->ifindex
= ifindex
;
1149 /* ifindex for timeout events w/o previous frame reception */
1150 op
->rx_ifindex
= ifindex
;
1152 /* initialize uninitialized (kzalloc) structure */
1153 hrtimer_init(&op
->timer
, CLOCK_MONOTONIC
, HRTIMER_MODE_REL
);
1154 op
->timer
.function
= bcm_rx_timeout_handler
;
1156 /* initialize tasklet for rx timeout notification */
1157 tasklet_init(&op
->tsklet
, bcm_rx_timeout_tsklet
,
1158 (unsigned long) op
);
1160 hrtimer_init(&op
->thrtimer
, CLOCK_MONOTONIC
, HRTIMER_MODE_REL
);
1161 op
->thrtimer
.function
= bcm_rx_thr_handler
;
1163 /* initialize tasklet for rx throttle handling */
1164 tasklet_init(&op
->thrtsklet
, bcm_rx_thr_tsklet
,
1165 (unsigned long) op
);
1167 /* add this bcm_op to the list of the rx_ops */
1168 list_add(&op
->list
, &bo
->rx_ops
);
1170 /* call can_rx_register() */
1173 } /* if ((op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex))) */
1177 if (op
->flags
& RX_RTR_FRAME
) {
1178 struct canfd_frame
*frame0
= op
->frames
;
1180 /* no timers in RTR-mode */
1181 hrtimer_cancel(&op
->thrtimer
);
1182 hrtimer_cancel(&op
->timer
);
1185 * funny feature in RX(!)_SETUP only for RTR-mode:
1186 * copy can_id into frame BUT without RTR-flag to
1187 * prevent a full-load-loopback-test ... ;-]
1189 if ((op
->flags
& TX_CP_CAN_ID
) ||
1190 (frame0
->can_id
== op
->can_id
))
1191 frame0
->can_id
= op
->can_id
& ~CAN_RTR_FLAG
;
1194 if (op
->flags
& SETTIMER
) {
1196 /* set timer value */
1197 op
->ival1
= msg_head
->ival1
;
1198 op
->ival2
= msg_head
->ival2
;
1199 op
->kt_ival1
= bcm_timeval_to_ktime(msg_head
->ival1
);
1200 op
->kt_ival2
= bcm_timeval_to_ktime(msg_head
->ival2
);
1202 /* disable an active timer due to zero value? */
1204 hrtimer_cancel(&op
->timer
);
1207 * In any case cancel the throttle timer, flush
1208 * potentially blocked msgs and reset throttle handling
1211 hrtimer_cancel(&op
->thrtimer
);
1212 bcm_rx_thr_flush(op
, 1);
1215 if ((op
->flags
& STARTTIMER
) && op
->kt_ival1
)
1216 hrtimer_start(&op
->timer
, op
->kt_ival1
,
1220 /* now we can register for can_ids, if we added a new bcm_op */
1221 if (do_rx_register
) {
1223 struct net_device
*dev
;
1225 dev
= dev_get_by_index(sock_net(sk
), ifindex
);
1227 err
= can_rx_register(sock_net(sk
), dev
,
1229 REGMASK(op
->can_id
),
1233 op
->rx_reg_dev
= dev
;
1238 err
= can_rx_register(sock_net(sk
), NULL
, op
->can_id
,
1239 REGMASK(op
->can_id
),
1240 bcm_rx_handler
, op
, "bcm", sk
);
1242 /* this bcm rx op is broken -> remove it */
1243 list_del(&op
->list
);
1249 return msg_head
->nframes
* op
->cfsiz
+ MHSIZ
;
1253 * bcm_tx_send - send a single CAN frame to the CAN interface (for bcm_sendmsg)
1255 static int bcm_tx_send(struct msghdr
*msg
, int ifindex
, struct sock
*sk
,
1258 struct sk_buff
*skb
;
1259 struct net_device
*dev
;
1262 /* we need a real device to send frames */
1266 skb
= alloc_skb(cfsiz
+ sizeof(struct can_skb_priv
), GFP_KERNEL
);
1270 can_skb_reserve(skb
);
1272 err
= memcpy_from_msg(skb_put(skb
, cfsiz
), msg
, cfsiz
);
1278 dev
= dev_get_by_index(sock_net(sk
), ifindex
);
1284 can_skb_prv(skb
)->ifindex
= dev
->ifindex
;
1285 can_skb_prv(skb
)->skbcnt
= 0;
1287 can_skb_set_owner(skb
, sk
);
1288 err
= can_send(skb
, 1); /* send with loopback */
1294 return cfsiz
+ MHSIZ
;
1298 * bcm_sendmsg - process BCM commands (opcodes) from the userspace
1300 static int bcm_sendmsg(struct socket
*sock
, struct msghdr
*msg
, size_t size
)
1302 struct sock
*sk
= sock
->sk
;
1303 struct bcm_sock
*bo
= bcm_sk(sk
);
1304 int ifindex
= bo
->ifindex
; /* default ifindex for this bcm_op */
1305 struct bcm_msg_head msg_head
;
1307 int ret
; /* read bytes or error codes as return value */
1312 /* check for valid message length from userspace */
1316 /* read message head information */
1317 ret
= memcpy_from_msg((u8
*)&msg_head
, msg
, MHSIZ
);
1321 cfsiz
= CFSIZ(msg_head
.flags
);
1322 if ((size
- MHSIZ
) % cfsiz
)
1325 /* check for alternative ifindex for this bcm_op */
1327 if (!ifindex
&& msg
->msg_name
) {
1328 /* no bound device as default => check msg_name */
1329 DECLARE_SOCKADDR(struct sockaddr_can
*, addr
, msg
->msg_name
);
1331 if (msg
->msg_namelen
< sizeof(*addr
))
1334 if (addr
->can_family
!= AF_CAN
)
1337 /* ifindex from sendto() */
1338 ifindex
= addr
->can_ifindex
;
1341 struct net_device
*dev
;
1343 dev
= dev_get_by_index(sock_net(sk
), ifindex
);
1347 if (dev
->type
!= ARPHRD_CAN
) {
1358 switch (msg_head
.opcode
) {
1361 ret
= bcm_tx_setup(&msg_head
, msg
, ifindex
, sk
);
1365 ret
= bcm_rx_setup(&msg_head
, msg
, ifindex
, sk
);
1369 if (bcm_delete_tx_op(&bo
->tx_ops
, &msg_head
, ifindex
))
1376 if (bcm_delete_rx_op(&bo
->rx_ops
, &msg_head
, ifindex
))
1383 /* reuse msg_head for the reply to TX_READ */
1384 msg_head
.opcode
= TX_STATUS
;
1385 ret
= bcm_read_op(&bo
->tx_ops
, &msg_head
, ifindex
);
1389 /* reuse msg_head for the reply to RX_READ */
1390 msg_head
.opcode
= RX_STATUS
;
1391 ret
= bcm_read_op(&bo
->rx_ops
, &msg_head
, ifindex
);
1395 /* we need exactly one CAN frame behind the msg head */
1396 if ((msg_head
.nframes
!= 1) || (size
!= cfsiz
+ MHSIZ
))
1399 ret
= bcm_tx_send(msg
, ifindex
, sk
, cfsiz
);
1413 * notification handler for netdevice status changes
1415 static int bcm_notifier(struct notifier_block
*nb
, unsigned long msg
,
1418 struct net_device
*dev
= netdev_notifier_info_to_dev(ptr
);
1419 struct bcm_sock
*bo
= container_of(nb
, struct bcm_sock
, notifier
);
1420 struct sock
*sk
= &bo
->sk
;
1422 int notify_enodev
= 0;
1424 if (!net_eq(dev_net(dev
), sock_net(sk
)))
1427 if (dev
->type
!= ARPHRD_CAN
)
1432 case NETDEV_UNREGISTER
:
1435 /* remove device specific receive entries */
1436 list_for_each_entry(op
, &bo
->rx_ops
, list
)
1437 if (op
->rx_reg_dev
== dev
)
1438 bcm_rx_unreg(dev
, op
);
1440 /* remove device reference, if this is our bound device */
1441 if (bo
->bound
&& bo
->ifindex
== dev
->ifindex
) {
1449 if (notify_enodev
) {
1450 sk
->sk_err
= ENODEV
;
1451 if (!sock_flag(sk
, SOCK_DEAD
))
1452 sk
->sk_error_report(sk
);
1457 if (bo
->bound
&& bo
->ifindex
== dev
->ifindex
) {
1458 sk
->sk_err
= ENETDOWN
;
1459 if (!sock_flag(sk
, SOCK_DEAD
))
1460 sk
->sk_error_report(sk
);
1468 * initial settings for all BCM sockets to be set at socket creation time
1470 static int bcm_init(struct sock
*sk
)
1472 struct bcm_sock
*bo
= bcm_sk(sk
);
1476 bo
->dropped_usr_msgs
= 0;
1477 bo
->bcm_proc_read
= NULL
;
1479 INIT_LIST_HEAD(&bo
->tx_ops
);
1480 INIT_LIST_HEAD(&bo
->rx_ops
);
1483 bo
->notifier
.notifier_call
= bcm_notifier
;
1485 register_netdevice_notifier(&bo
->notifier
);
1491 * standard socket functions
1493 static int bcm_release(struct socket
*sock
)
1495 struct sock
*sk
= sock
->sk
;
1496 struct net
*net
= sock_net(sk
);
1497 struct bcm_sock
*bo
;
1498 struct bcm_op
*op
, *next
;
1505 /* remove bcm_ops, timer, rx_unregister(), etc. */
1507 unregister_netdevice_notifier(&bo
->notifier
);
1511 list_for_each_entry_safe(op
, next
, &bo
->tx_ops
, list
)
1514 list_for_each_entry_safe(op
, next
, &bo
->rx_ops
, list
) {
1516 * Don't care if we're bound or not (due to netdev problems)
1517 * can_rx_unregister() is always a save thing to do here.
1521 * Only remove subscriptions that had not
1522 * been removed due to NETDEV_UNREGISTER
1525 if (op
->rx_reg_dev
) {
1526 struct net_device
*dev
;
1528 dev
= dev_get_by_index(net
, op
->ifindex
);
1530 bcm_rx_unreg(dev
, op
);
1535 can_rx_unregister(net
, NULL
, op
->can_id
,
1536 REGMASK(op
->can_id
),
1537 bcm_rx_handler
, op
);
1542 #if IS_ENABLED(CONFIG_PROC_FS)
1543 /* remove procfs entry */
1544 if (net
->can
.bcmproc_dir
&& bo
->bcm_proc_read
)
1545 remove_proc_entry(bo
->procname
, net
->can
.bcmproc_dir
);
1546 #endif /* CONFIG_PROC_FS */
1548 /* remove device reference */
1563 static int bcm_connect(struct socket
*sock
, struct sockaddr
*uaddr
, int len
,
1566 struct sockaddr_can
*addr
= (struct sockaddr_can
*)uaddr
;
1567 struct sock
*sk
= sock
->sk
;
1568 struct bcm_sock
*bo
= bcm_sk(sk
);
1569 struct net
*net
= sock_net(sk
);
1572 if (len
< sizeof(*addr
))
1582 /* bind a device to this socket */
1583 if (addr
->can_ifindex
) {
1584 struct net_device
*dev
;
1586 dev
= dev_get_by_index(net
, addr
->can_ifindex
);
1591 if (dev
->type
!= ARPHRD_CAN
) {
1597 bo
->ifindex
= dev
->ifindex
;
1601 /* no interface reference for ifindex = 0 ('any' CAN device) */
1605 #if IS_ENABLED(CONFIG_PROC_FS)
1606 if (net
->can
.bcmproc_dir
) {
1607 /* unique socket address as filename */
1608 sprintf(bo
->procname
, "%lu", sock_i_ino(sk
));
1609 bo
->bcm_proc_read
= proc_create_data(bo
->procname
, 0644,
1610 net
->can
.bcmproc_dir
,
1611 &bcm_proc_fops
, sk
);
1612 if (!bo
->bcm_proc_read
) {
1617 #endif /* CONFIG_PROC_FS */
1627 static int bcm_recvmsg(struct socket
*sock
, struct msghdr
*msg
, size_t size
,
1630 struct sock
*sk
= sock
->sk
;
1631 struct sk_buff
*skb
;
1636 noblock
= flags
& MSG_DONTWAIT
;
1637 flags
&= ~MSG_DONTWAIT
;
1638 skb
= skb_recv_datagram(sk
, flags
, noblock
, &error
);
1642 if (skb
->len
< size
)
1645 err
= memcpy_to_msg(msg
, skb
->data
, size
);
1647 skb_free_datagram(sk
, skb
);
1651 sock_recv_ts_and_drops(msg
, sk
, skb
);
1653 if (msg
->msg_name
) {
1654 __sockaddr_check_size(sizeof(struct sockaddr_can
));
1655 msg
->msg_namelen
= sizeof(struct sockaddr_can
);
1656 memcpy(msg
->msg_name
, skb
->cb
, msg
->msg_namelen
);
1659 skb_free_datagram(sk
, skb
);
1664 static const struct proto_ops bcm_ops
= {
1666 .release
= bcm_release
,
1667 .bind
= sock_no_bind
,
1668 .connect
= bcm_connect
,
1669 .socketpair
= sock_no_socketpair
,
1670 .accept
= sock_no_accept
,
1671 .getname
= sock_no_getname
,
1672 .poll
= datagram_poll
,
1673 .ioctl
= can_ioctl
, /* use can_ioctl() from af_can.c */
1674 .listen
= sock_no_listen
,
1675 .shutdown
= sock_no_shutdown
,
1676 .setsockopt
= sock_no_setsockopt
,
1677 .getsockopt
= sock_no_getsockopt
,
1678 .sendmsg
= bcm_sendmsg
,
1679 .recvmsg
= bcm_recvmsg
,
1680 .mmap
= sock_no_mmap
,
1681 .sendpage
= sock_no_sendpage
,
1684 static struct proto bcm_proto __read_mostly
= {
1686 .owner
= THIS_MODULE
,
1687 .obj_size
= sizeof(struct bcm_sock
),
1691 static const struct can_proto bcm_can_proto
= {
1693 .protocol
= CAN_BCM
,
1698 static int canbcm_pernet_init(struct net
*net
)
1700 #if IS_ENABLED(CONFIG_PROC_FS)
1701 /* create /proc/net/can-bcm directory */
1702 net
->can
.bcmproc_dir
= proc_net_mkdir(net
, "can-bcm", net
->proc_net
);
1703 #endif /* CONFIG_PROC_FS */
1708 static void canbcm_pernet_exit(struct net
*net
)
1710 #if IS_ENABLED(CONFIG_PROC_FS)
1711 /* remove /proc/net/can-bcm directory */
1712 if (net
->can
.bcmproc_dir
)
1713 remove_proc_entry("can-bcm", net
->proc_net
);
1714 #endif /* CONFIG_PROC_FS */
1717 static struct pernet_operations canbcm_pernet_ops __read_mostly
= {
1718 .init
= canbcm_pernet_init
,
1719 .exit
= canbcm_pernet_exit
,
1722 static int __init
bcm_module_init(void)
1726 pr_info("can: broadcast manager protocol (rev " CAN_BCM_VERSION
" t)\n");
1728 err
= can_proto_register(&bcm_can_proto
);
1730 printk(KERN_ERR
"can: registration of bcm protocol failed\n");
1734 register_pernet_subsys(&canbcm_pernet_ops
);
1738 static void __exit
bcm_module_exit(void)
1740 can_proto_unregister(&bcm_can_proto
);
1741 unregister_pernet_subsys(&canbcm_pernet_ops
);
1744 module_init(bcm_module_init
);
1745 module_exit(bcm_module_exit
);