1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
5 * This file define the irq handler for MSP PER subsystem interrupts.
8 #include <linux/init.h>
9 #include <linux/interrupt.h>
10 #include <linux/kernel.h>
11 #include <linux/spinlock.h>
12 #include <linux/bitops.h>
14 #include <asm/mipsregs.h>
16 #include <msp_cic_int.h>
21 * Convenience Macro. Should be somewhere generic.
23 #define get_current_vpe() \
24 ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
28 * The PER registers must be protected from concurrent access.
31 static DEFINE_SPINLOCK(per_lock
);
34 /* ensure writes to per are completed */
36 static inline void per_wmb(void)
38 const volatile void __iomem
*per_mem
= PER_INT_MSK_REG
;
39 volatile u32 dummy_read
;
42 dummy_read
= __raw_readl(per_mem
);
46 static inline void unmask_per_irq(struct irq_data
*d
)
50 spin_lock_irqsave(&per_lock
, flags
);
51 *PER_INT_MSK_REG
|= (1 << (d
->irq
- MSP_PER_INTBASE
));
52 spin_unlock_irqrestore(&per_lock
, flags
);
54 *PER_INT_MSK_REG
|= (1 << (d
->irq
- MSP_PER_INTBASE
));
59 static inline void mask_per_irq(struct irq_data
*d
)
63 spin_lock_irqsave(&per_lock
, flags
);
64 *PER_INT_MSK_REG
&= ~(1 << (d
->irq
- MSP_PER_INTBASE
));
65 spin_unlock_irqrestore(&per_lock
, flags
);
67 *PER_INT_MSK_REG
&= ~(1 << (d
->irq
- MSP_PER_INTBASE
));
72 static inline void msp_per_irq_ack(struct irq_data
*d
)
76 * In the PER interrupt controller, only bits 11 and 10
77 * are write-to-clear, (SPI TX complete, SPI RX complete).
78 * It does nothing for any others.
80 *PER_INT_STS_REG
= (1 << (d
->irq
- MSP_PER_INTBASE
));
84 static int msp_per_irq_set_affinity(struct irq_data
*d
,
85 const struct cpumask
*affinity
, bool force
)
87 /* WTF is this doing ????? */
93 static struct irq_chip msp_per_irq_controller
= {
95 .irq_enable
= unmask_per_irq
,
96 .irq_disable
= mask_per_irq
,
97 .irq_ack
= msp_per_irq_ack
,
99 .irq_set_affinity
= msp_per_irq_set_affinity
,
103 void __init
msp_per_irq_init(void)
106 /* Mask/clear interrupts. */
107 *PER_INT_MSK_REG
= 0x00000000;
108 *PER_INT_STS_REG
= 0xFFFFFFFF;
109 /* initialize all the IRQ descriptors */
110 for (i
= MSP_PER_INTBASE
; i
< MSP_PER_INTBASE
+ 32; i
++) {
111 irq_set_chip(i
, &msp_per_irq_controller
);
115 void msp_per_irq_dispatch(void)
117 u32 per_mask
= *PER_INT_MSK_REG
;
118 u32 per_status
= *PER_INT_STS_REG
;
121 pending
= per_status
& per_mask
;
123 do_IRQ(ffs(pending
) + MSP_PER_INTBASE
- 1);
125 spurious_interrupt();