Staging: netwave: delete the driver
[linux/fpc-iii.git] / drivers / gpu / drm / nouveau / nv04_dfp.c
blob41634d4752fe08f6309d81c0b81ff0b7a65cc64f
1 /*
2 * Copyright 2003 NVIDIA, Corporation
3 * Copyright 2006 Dave Airlie
4 * Copyright 2007 Maarten Maathuis
5 * Copyright 2007-2009 Stuart Bennett
7 * Permission is hereby granted, free of charge, to any person obtaining a
8 * copy of this software and associated documentation files (the "Software"),
9 * to deal in the Software without restriction, including without limitation
10 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
11 * and/or sell copies of the Software, and to permit persons to whom the
12 * Software is furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice (including the next
15 * paragraph) shall be included in all copies or substantial portions of the
16 * Software.
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
23 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
24 * DEALINGS IN THE SOFTWARE.
27 #include "drmP.h"
28 #include "drm_crtc_helper.h"
30 #include "nouveau_drv.h"
31 #include "nouveau_encoder.h"
32 #include "nouveau_connector.h"
33 #include "nouveau_crtc.h"
34 #include "nouveau_hw.h"
35 #include "nvreg.h"
37 #define FP_TG_CONTROL_ON (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS | \
38 NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS | \
39 NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS)
40 #define FP_TG_CONTROL_OFF (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_DISABLE | \
41 NV_PRAMDAC_FP_TG_CONTROL_HSYNC_DISABLE | \
42 NV_PRAMDAC_FP_TG_CONTROL_VSYNC_DISABLE)
44 static inline bool is_fpc_off(uint32_t fpc)
46 return ((fpc & (FP_TG_CONTROL_ON | FP_TG_CONTROL_OFF)) ==
47 FP_TG_CONTROL_OFF);
50 int nv04_dfp_get_bound_head(struct drm_device *dev, struct dcb_entry *dcbent)
52 /* special case of nv_read_tmds to find crtc associated with an output.
53 * this does not give a correct answer for off-chip dvi, but there's no
54 * use for such an answer anyway
56 int ramdac = (dcbent->or & OUTPUT_C) >> 2;
58 NVWriteRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_CONTROL,
59 NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE | 0x4);
60 return ((NVReadRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_DATA) & 0x8) >> 3) ^ ramdac;
63 void nv04_dfp_bind_head(struct drm_device *dev, struct dcb_entry *dcbent,
64 int head, bool dl)
66 /* The BIOS scripts don't do this for us, sadly
67 * Luckily we do know the values ;-)
69 * head < 0 indicates we wish to force a setting with the overrideval
70 * (for VT restore etc.)
73 int ramdac = (dcbent->or & OUTPUT_C) >> 2;
74 uint8_t tmds04 = 0x80;
76 if (head != ramdac)
77 tmds04 = 0x88;
79 if (dcbent->type == OUTPUT_LVDS)
80 tmds04 |= 0x01;
82 nv_write_tmds(dev, dcbent->or, 0, 0x04, tmds04);
84 if (dl) /* dual link */
85 nv_write_tmds(dev, dcbent->or, 1, 0x04, tmds04 ^ 0x08);
88 void nv04_dfp_disable(struct drm_device *dev, int head)
90 struct drm_nouveau_private *dev_priv = dev->dev_private;
91 struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
93 if (NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL) &
94 FP_TG_CONTROL_ON) {
95 /* digital remnants must be cleaned before new crtc
96 * values programmed. delay is time for the vga stuff
97 * to realise it's in control again
99 NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
100 FP_TG_CONTROL_OFF);
101 msleep(50);
103 /* don't inadvertently turn it on when state written later */
104 crtcstate[head].fp_control = FP_TG_CONTROL_OFF;
107 void nv04_dfp_update_fp_control(struct drm_encoder *encoder, int mode)
109 struct drm_device *dev = encoder->dev;
110 struct drm_nouveau_private *dev_priv = dev->dev_private;
111 struct drm_crtc *crtc;
112 struct nouveau_crtc *nv_crtc;
113 uint32_t *fpc;
115 if (mode == DRM_MODE_DPMS_ON) {
116 nv_crtc = nouveau_crtc(encoder->crtc);
117 fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
119 if (is_fpc_off(*fpc)) {
120 /* using saved value is ok, as (is_digital && dpms_on &&
121 * fp_control==OFF) is (at present) *only* true when
122 * fpc's most recent change was by below "off" code
124 *fpc = nv_crtc->dpms_saved_fp_control;
127 nv_crtc->fp_users |= 1 << nouveau_encoder(encoder)->dcb->index;
128 NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_FP_TG_CONTROL, *fpc);
129 } else {
130 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
131 nv_crtc = nouveau_crtc(crtc);
132 fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
134 nv_crtc->fp_users &= ~(1 << nouveau_encoder(encoder)->dcb->index);
135 if (!is_fpc_off(*fpc) && !nv_crtc->fp_users) {
136 nv_crtc->dpms_saved_fp_control = *fpc;
137 /* cut the FP output */
138 *fpc &= ~FP_TG_CONTROL_ON;
139 *fpc |= FP_TG_CONTROL_OFF;
140 NVWriteRAMDAC(dev, nv_crtc->index,
141 NV_PRAMDAC_FP_TG_CONTROL, *fpc);
147 static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
148 struct drm_display_mode *mode,
149 struct drm_display_mode *adjusted_mode)
151 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
152 struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
154 /* For internal panels and gpu scaling on DVI we need the native mode */
155 if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
156 if (!nv_connector->native_mode)
157 return false;
158 nv_encoder->mode = *nv_connector->native_mode;
159 adjusted_mode->clock = nv_connector->native_mode->clock;
160 } else {
161 nv_encoder->mode = *adjusted_mode;
164 return true;
167 static void nv04_dfp_prepare_sel_clk(struct drm_device *dev,
168 struct nouveau_encoder *nv_encoder, int head)
170 struct drm_nouveau_private *dev_priv = dev->dev_private;
171 struct nv04_mode_state *state = &dev_priv->mode_reg;
172 uint32_t bits1618 = nv_encoder->dcb->or & OUTPUT_A ? 0x10000 : 0x40000;
174 if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP)
175 return;
177 /* SEL_CLK is only used on the primary ramdac
178 * It toggles spread spectrum PLL output and sets the bindings of PLLs
179 * to heads on digital outputs
181 if (head)
182 state->sel_clk |= bits1618;
183 else
184 state->sel_clk &= ~bits1618;
186 /* nv30:
187 * bit 0 NVClk spread spectrum on/off
188 * bit 2 MemClk spread spectrum on/off
189 * bit 4 PixClk1 spread spectrum on/off toggle
190 * bit 6 PixClk2 spread spectrum on/off toggle
192 * nv40 (observations from bios behaviour and mmio traces):
193 * bits 4&6 as for nv30
194 * bits 5&7 head dependent as for bits 4&6, but do not appear with 4&6;
195 * maybe a different spread mode
196 * bits 8&10 seen on dual-link dvi outputs, purpose unknown (set by POST scripts)
197 * The logic behind turning spread spectrum on/off in the first place,
198 * and which bit-pair to use, is unclear on nv40 (for earlier cards, the fp table
199 * entry has the necessary info)
201 if (nv_encoder->dcb->type == OUTPUT_LVDS && dev_priv->saved_reg.sel_clk & 0xf0) {
202 int shift = (dev_priv->saved_reg.sel_clk & 0x50) ? 0 : 1;
204 state->sel_clk &= ~0xf0;
205 state->sel_clk |= (head ? 0x40 : 0x10) << shift;
209 static void nv04_dfp_prepare(struct drm_encoder *encoder)
211 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
212 struct drm_encoder_helper_funcs *helper = encoder->helper_private;
213 struct drm_device *dev = encoder->dev;
214 struct drm_nouveau_private *dev_priv = dev->dev_private;
215 int head = nouveau_crtc(encoder->crtc)->index;
216 struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
217 uint8_t *cr_lcd = &crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX];
218 uint8_t *cr_lcd_oth = &crtcstate[head ^ 1].CRTC[NV_CIO_CRE_LCD__INDEX];
220 helper->dpms(encoder, DRM_MODE_DPMS_OFF);
222 nv04_dfp_prepare_sel_clk(dev, nv_encoder, head);
224 /* Some NV4x have unknown values (0x3f, 0x50, 0x54, 0x6b, 0x79, 0x7f)
225 * at LCD__INDEX which we don't alter
227 if (!(*cr_lcd & 0x44)) {
228 *cr_lcd = 0x3;
230 if (nv_two_heads(dev)) {
231 if (nv_encoder->dcb->location == DCB_LOC_ON_CHIP)
232 *cr_lcd |= head ? 0x0 : 0x8;
233 else {
234 *cr_lcd |= (nv_encoder->dcb->or << 4) & 0x30;
235 if (nv_encoder->dcb->type == OUTPUT_LVDS)
236 *cr_lcd |= 0x30;
237 if ((*cr_lcd & 0x30) == (*cr_lcd_oth & 0x30)) {
238 /* avoid being connected to both crtcs */
239 *cr_lcd_oth &= ~0x30;
240 NVWriteVgaCrtc(dev, head ^ 1,
241 NV_CIO_CRE_LCD__INDEX,
242 *cr_lcd_oth);
250 static void nv04_dfp_mode_set(struct drm_encoder *encoder,
251 struct drm_display_mode *mode,
252 struct drm_display_mode *adjusted_mode)
254 struct drm_device *dev = encoder->dev;
255 struct drm_nouveau_private *dev_priv = dev->dev_private;
256 struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
257 struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index];
258 struct nv04_crtc_reg *savep = &dev_priv->saved_reg.crtc_reg[nv_crtc->index];
259 struct nouveau_connector *nv_connector = nouveau_crtc_connector_get(nv_crtc);
260 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
261 struct drm_display_mode *output_mode = &nv_encoder->mode;
262 uint32_t mode_ratio, panel_ratio;
264 NV_DEBUG_KMS(dev, "Output mode on CRTC %d:\n", nv_crtc->index);
265 drm_mode_debug_printmodeline(output_mode);
267 /* Initialize the FP registers in this CRTC. */
268 regp->fp_horiz_regs[FP_DISPLAY_END] = output_mode->hdisplay - 1;
269 regp->fp_horiz_regs[FP_TOTAL] = output_mode->htotal - 1;
270 if (!nv_gf4_disp_arch(dev) ||
271 (output_mode->hsync_start - output_mode->hdisplay) >=
272 dev_priv->vbios.digital_min_front_porch)
273 regp->fp_horiz_regs[FP_CRTC] = output_mode->hdisplay;
274 else
275 regp->fp_horiz_regs[FP_CRTC] = output_mode->hsync_start - dev_priv->vbios.digital_min_front_porch - 1;
276 regp->fp_horiz_regs[FP_SYNC_START] = output_mode->hsync_start - 1;
277 regp->fp_horiz_regs[FP_SYNC_END] = output_mode->hsync_end - 1;
278 regp->fp_horiz_regs[FP_VALID_START] = output_mode->hskew;
279 regp->fp_horiz_regs[FP_VALID_END] = output_mode->hdisplay - 1;
281 regp->fp_vert_regs[FP_DISPLAY_END] = output_mode->vdisplay - 1;
282 regp->fp_vert_regs[FP_TOTAL] = output_mode->vtotal - 1;
283 regp->fp_vert_regs[FP_CRTC] = output_mode->vtotal - 5 - 1;
284 regp->fp_vert_regs[FP_SYNC_START] = output_mode->vsync_start - 1;
285 regp->fp_vert_regs[FP_SYNC_END] = output_mode->vsync_end - 1;
286 regp->fp_vert_regs[FP_VALID_START] = 0;
287 regp->fp_vert_regs[FP_VALID_END] = output_mode->vdisplay - 1;
289 /* bit26: a bit seen on some g7x, no as yet discernable purpose */
290 regp->fp_control = NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
291 (savep->fp_control & (1 << 26 | NV_PRAMDAC_FP_TG_CONTROL_READ_PROG));
292 /* Deal with vsync/hsync polarity */
293 /* LVDS screens do set this, but modes with +ve syncs are very rare */
294 if (output_mode->flags & DRM_MODE_FLAG_PVSYNC)
295 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS;
296 if (output_mode->flags & DRM_MODE_FLAG_PHSYNC)
297 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS;
298 /* panel scaling first, as native would get set otherwise */
299 if (nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
300 nv_connector->scaling_mode == DRM_MODE_SCALE_CENTER) /* panel handles it */
301 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_CENTER;
302 else if (adjusted_mode->hdisplay == output_mode->hdisplay &&
303 adjusted_mode->vdisplay == output_mode->vdisplay) /* native mode */
304 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_NATIVE;
305 else /* gpu needs to scale */
306 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_SCALE;
307 if (nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) & NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT)
308 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12;
309 if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP &&
310 output_mode->clock > 165000)
311 regp->fp_control |= (2 << 24);
312 if (nv_encoder->dcb->type == OUTPUT_LVDS) {
313 bool duallink, dummy;
315 nouveau_bios_parse_lvds_table(dev, nv_connector->native_mode->
316 clock, &duallink, &dummy);
317 if (duallink)
318 regp->fp_control |= (8 << 28);
319 } else
320 if (output_mode->clock > 165000)
321 regp->fp_control |= (8 << 28);
323 regp->fp_debug_0 = NV_PRAMDAC_FP_DEBUG_0_YWEIGHT_ROUND |
324 NV_PRAMDAC_FP_DEBUG_0_XWEIGHT_ROUND |
325 NV_PRAMDAC_FP_DEBUG_0_YINTERP_BILINEAR |
326 NV_PRAMDAC_FP_DEBUG_0_XINTERP_BILINEAR |
327 NV_RAMDAC_FP_DEBUG_0_TMDS_ENABLED |
328 NV_PRAMDAC_FP_DEBUG_0_YSCALE_ENABLE |
329 NV_PRAMDAC_FP_DEBUG_0_XSCALE_ENABLE;
331 /* We want automatic scaling */
332 regp->fp_debug_1 = 0;
333 /* This can override HTOTAL and VTOTAL */
334 regp->fp_debug_2 = 0;
336 /* Use 20.12 fixed point format to avoid floats */
337 mode_ratio = (1 << 12) * adjusted_mode->hdisplay / adjusted_mode->vdisplay;
338 panel_ratio = (1 << 12) * output_mode->hdisplay / output_mode->vdisplay;
339 /* if ratios are equal, SCALE_ASPECT will automatically (and correctly)
340 * get treated the same as SCALE_FULLSCREEN */
341 if (nv_connector->scaling_mode == DRM_MODE_SCALE_ASPECT &&
342 mode_ratio != panel_ratio) {
343 uint32_t diff, scale;
344 bool divide_by_2 = nv_gf4_disp_arch(dev);
346 if (mode_ratio < panel_ratio) {
347 /* vertical needs to expand to glass size (automatic)
348 * horizontal needs to be scaled at vertical scale factor
349 * to maintain aspect */
351 scale = (1 << 12) * adjusted_mode->vdisplay / output_mode->vdisplay;
352 regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE |
353 XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
355 /* restrict area of screen used, horizontally */
356 diff = output_mode->hdisplay -
357 output_mode->vdisplay * mode_ratio / (1 << 12);
358 regp->fp_horiz_regs[FP_VALID_START] += diff / 2;
359 regp->fp_horiz_regs[FP_VALID_END] -= diff / 2;
362 if (mode_ratio > panel_ratio) {
363 /* horizontal needs to expand to glass size (automatic)
364 * vertical needs to be scaled at horizontal scale factor
365 * to maintain aspect */
367 scale = (1 << 12) * adjusted_mode->hdisplay / output_mode->hdisplay;
368 regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_YSCALE_TESTMODE_ENABLE |
369 XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
371 /* restrict area of screen used, vertically */
372 diff = output_mode->vdisplay -
373 (1 << 12) * output_mode->hdisplay / mode_ratio;
374 regp->fp_vert_regs[FP_VALID_START] += diff / 2;
375 regp->fp_vert_regs[FP_VALID_END] -= diff / 2;
379 /* Output property. */
380 if (nv_connector->use_dithering) {
381 if (dev_priv->chipset == 0x11)
382 regp->dither = savep->dither | 0x00010000;
383 else {
384 int i;
385 regp->dither = savep->dither | 0x00000001;
386 for (i = 0; i < 3; i++) {
387 regp->dither_regs[i] = 0xe4e4e4e4;
388 regp->dither_regs[i + 3] = 0x44444444;
391 } else {
392 if (dev_priv->chipset != 0x11) {
393 /* reset them */
394 int i;
395 for (i = 0; i < 3; i++) {
396 regp->dither_regs[i] = savep->dither_regs[i];
397 regp->dither_regs[i + 3] = savep->dither_regs[i + 3];
400 regp->dither = savep->dither;
403 regp->fp_margin_color = 0;
406 static void nv04_dfp_commit(struct drm_encoder *encoder)
408 struct drm_device *dev = encoder->dev;
409 struct drm_nouveau_private *dev_priv = dev->dev_private;
410 struct drm_encoder_helper_funcs *helper = encoder->helper_private;
411 struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
412 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
413 struct dcb_entry *dcbe = nv_encoder->dcb;
414 int head = nouveau_crtc(encoder->crtc)->index;
416 NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n",
417 drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
418 nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
420 if (dcbe->type == OUTPUT_TMDS)
421 run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock);
422 else if (dcbe->type == OUTPUT_LVDS)
423 call_lvds_script(dev, dcbe, head, LVDS_RESET, nv_encoder->mode.clock);
425 /* update fp_control state for any changes made by scripts,
426 * so correct value is written at DPMS on */
427 dev_priv->mode_reg.crtc_reg[head].fp_control =
428 NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
430 /* This could use refinement for flatpanels, but it should work this way */
431 if (dev_priv->chipset < 0x44)
432 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0xf0000000);
433 else
434 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0x00100000);
436 helper->dpms(encoder, DRM_MODE_DPMS_ON);
438 NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n",
439 drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
440 nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
443 static inline bool is_powersaving_dpms(int mode)
445 return (mode != DRM_MODE_DPMS_ON);
448 static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
450 struct drm_device *dev = encoder->dev;
451 struct drm_crtc *crtc = encoder->crtc;
452 struct drm_nouveau_private *dev_priv = dev->dev_private;
453 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
454 bool was_powersaving = is_powersaving_dpms(nv_encoder->last_dpms);
456 if (nv_encoder->last_dpms == mode)
457 return;
458 nv_encoder->last_dpms = mode;
460 NV_INFO(dev, "Setting dpms mode %d on lvds encoder (output %d)\n",
461 mode, nv_encoder->dcb->index);
463 if (was_powersaving && is_powersaving_dpms(mode))
464 return;
466 if (nv_encoder->dcb->lvdsconf.use_power_scripts) {
467 struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
469 /* when removing an output, crtc may not be set, but PANEL_OFF
470 * must still be run
472 int head = crtc ? nouveau_crtc(crtc)->index :
473 nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
475 if (mode == DRM_MODE_DPMS_ON) {
476 if (!nv_connector->native_mode) {
477 NV_ERROR(dev, "Not turning on LVDS without native mode\n");
478 return;
480 call_lvds_script(dev, nv_encoder->dcb, head,
481 LVDS_PANEL_ON, nv_connector->native_mode->clock);
482 } else
483 /* pxclk of 0 is fine for PANEL_OFF, and for a
484 * disconnected LVDS encoder there is no native_mode
486 call_lvds_script(dev, nv_encoder->dcb, head,
487 LVDS_PANEL_OFF, 0);
490 nv04_dfp_update_fp_control(encoder, mode);
492 if (mode == DRM_MODE_DPMS_ON)
493 nv04_dfp_prepare_sel_clk(dev, nv_encoder, nouveau_crtc(crtc)->index);
494 else {
495 dev_priv->mode_reg.sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK);
496 dev_priv->mode_reg.sel_clk &= ~0xf0;
498 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, dev_priv->mode_reg.sel_clk);
501 static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode)
503 struct drm_device *dev = encoder->dev;
504 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
506 if (nv_encoder->last_dpms == mode)
507 return;
508 nv_encoder->last_dpms = mode;
510 NV_INFO(dev, "Setting dpms mode %d on tmds encoder (output %d)\n",
511 mode, nv_encoder->dcb->index);
513 nv04_dfp_update_fp_control(encoder, mode);
516 static void nv04_dfp_save(struct drm_encoder *encoder)
518 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
519 struct drm_device *dev = encoder->dev;
521 if (nv_two_heads(dev))
522 nv_encoder->restore.head =
523 nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
526 static void nv04_dfp_restore(struct drm_encoder *encoder)
528 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
529 struct drm_device *dev = encoder->dev;
530 struct drm_nouveau_private *dev_priv = dev->dev_private;
531 int head = nv_encoder->restore.head;
533 if (nv_encoder->dcb->type == OUTPUT_LVDS) {
534 struct drm_display_mode *native_mode = nouveau_encoder_connector_get(nv_encoder)->native_mode;
535 if (native_mode)
536 call_lvds_script(dev, nv_encoder->dcb, head, LVDS_PANEL_ON,
537 native_mode->clock);
538 else
539 NV_ERROR(dev, "Not restoring LVDS without native mode\n");
541 } else if (nv_encoder->dcb->type == OUTPUT_TMDS) {
542 int clock = nouveau_hw_pllvals_to_clk
543 (&dev_priv->saved_reg.crtc_reg[head].pllvals);
545 run_tmds_table(dev, nv_encoder->dcb, head, clock);
548 nv_encoder->last_dpms = NV_DPMS_CLEARED;
551 static void nv04_dfp_destroy(struct drm_encoder *encoder)
553 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
555 NV_DEBUG_KMS(encoder->dev, "\n");
557 drm_encoder_cleanup(encoder);
558 kfree(nv_encoder);
561 static const struct drm_encoder_helper_funcs nv04_lvds_helper_funcs = {
562 .dpms = nv04_lvds_dpms,
563 .save = nv04_dfp_save,
564 .restore = nv04_dfp_restore,
565 .mode_fixup = nv04_dfp_mode_fixup,
566 .prepare = nv04_dfp_prepare,
567 .commit = nv04_dfp_commit,
568 .mode_set = nv04_dfp_mode_set,
569 .detect = NULL,
572 static const struct drm_encoder_helper_funcs nv04_tmds_helper_funcs = {
573 .dpms = nv04_tmds_dpms,
574 .save = nv04_dfp_save,
575 .restore = nv04_dfp_restore,
576 .mode_fixup = nv04_dfp_mode_fixup,
577 .prepare = nv04_dfp_prepare,
578 .commit = nv04_dfp_commit,
579 .mode_set = nv04_dfp_mode_set,
580 .detect = NULL,
583 static const struct drm_encoder_funcs nv04_dfp_funcs = {
584 .destroy = nv04_dfp_destroy,
587 int nv04_dfp_create(struct drm_device *dev, struct dcb_entry *entry)
589 const struct drm_encoder_helper_funcs *helper;
590 struct drm_encoder *encoder;
591 struct nouveau_encoder *nv_encoder = NULL;
592 int type;
594 switch (entry->type) {
595 case OUTPUT_TMDS:
596 type = DRM_MODE_ENCODER_TMDS;
597 helper = &nv04_tmds_helper_funcs;
598 break;
599 case OUTPUT_LVDS:
600 type = DRM_MODE_ENCODER_LVDS;
601 helper = &nv04_lvds_helper_funcs;
602 break;
603 default:
604 return -EINVAL;
607 nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
608 if (!nv_encoder)
609 return -ENOMEM;
611 encoder = to_drm_encoder(nv_encoder);
613 nv_encoder->dcb = entry;
614 nv_encoder->or = ffs(entry->or) - 1;
616 drm_encoder_init(dev, encoder, &nv04_dfp_funcs, type);
617 drm_encoder_helper_add(encoder, helper);
619 encoder->possible_crtcs = entry->heads;
620 encoder->possible_clones = 0;
622 return 0;