arch/arm/mach-s3c24xx/mach-jive.c

   1 /* linux/arch/arm/mach-s3c2410/mach-jive.c
   2  *
   3  * Copyright 2007 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * http://armlinux.simtec.co.uk/
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11 */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/types.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/list.h>
  17 #include <linux/timer.h>
  18 #include <linux/init.h>
  19 #include <linux/gpio.h>
  20 #include <linux/syscore_ops.h>
  21 #include <linux/serial_core.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/i2c.h>
  24
  25 #include <video/ili9320.h>
  26
  27 #include <linux/spi/spi.h>
  28 #include <linux/spi/spi_gpio.h>
  29
  30 #include <asm/mach/arch.h>
  31 #include <asm/mach/map.h>
  32 #include <asm/mach/irq.h>
  33
  34 #include <plat/regs-serial.h>
  35 #include <linux/platform_data/mtd-nand-s3c2410.h>
  36 #include <linux/platform_data/i2c-s3c2410.h>
  37
  38 #include <mach/regs-gpio.h>
  39 #include <mach/regs-lcd.h>
  40 #include <mach/fb.h>
  41
  42 #include <asm/mach-types.h>
  43
  44 #include <linux/mtd/mtd.h>
  45 #include <linux/mtd/nand.h>
  46 #include <linux/mtd/nand_ecc.h>
  47 #include <linux/mtd/partitions.h>
  48
  49 #include <plat/gpio-cfg.h>
  50 #include <plat/clock.h>
  51 #include <plat/devs.h>
  52 #include <plat/cpu.h>
  53 #include <plat/pm.h>
  54 #include <linux/platform_data/usb-s3c2410_udc.h>
  55 #include <plat/samsung-time.h>
  56
  57 #include "common.h"
  58 #include "s3c2412-power.h"
  59
  60 static struct map_desc jive_iodesc[] __initdata = {
  61 };
  62
  63 #define UCON S3C2410_UCON_DEFAULT
  64 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
  65 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  66
  67 static struct s3c2410_uartcfg jive_uartcfgs[] = {
  68         [0] = {
  69                 .hwport      = 0,
  70                 .flags       = 0,
  71                 .ucon        = UCON,
  72                 .ulcon       = ULCON,
  73                 .ufcon       = UFCON,
  74         },
  75         [1] = {
  76                 .hwport      = 1,
  77                 .flags       = 0,
  78                 .ucon        = UCON,
  79                 .ulcon       = ULCON,
  80                 .ufcon       = UFCON,
  81         },
  82         [2] = {
  83                 .hwport      = 2,
  84                 .flags       = 0,
  85                 .ucon        = UCON,
  86                 .ulcon       = ULCON,
  87                 .ufcon       = UFCON,
  88         }
  89 };
  90
  91 /* Jive flash assignment
  92  *
  93  * 0x00000000-0x00028000 : uboot
  94  * 0x00028000-0x0002c000 : uboot env
  95  * 0x0002c000-0x00030000 : spare
  96  * 0x00030000-0x00200000 : zimage A
  97  * 0x00200000-0x01600000 : cramfs A
  98  * 0x01600000-0x017d0000 : zimage B
  99  * 0x017d0000-0x02bd0000 : cramfs B
 100  * 0x02bd0000-0x03fd0000 : yaffs
 101  */
 102 static struct mtd_partition __initdata jive_imageA_nand_part[] = {
 103
 104 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 105         /* Don't allow access to the bootloader from linux */
 106         {
 107                 .name           = "uboot",
 108                 .offset         = 0,
 109                 .size           = (160 * SZ_1K),
 110                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 111         },
 112
 113         /* spare */
 114         {
 115                 .name           = "spare",
 116                 .offset         = (176 * SZ_1K),
 117                 .size           = (16 * SZ_1K),
 118         },
 119 #endif
 120
 121         /* booted images */
 122         {
 123                 .name           = "kernel (ro)",
 124                 .offset         = (192 * SZ_1K),
 125                 .size           = (SZ_2M) - (192 * SZ_1K),
 126                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 127         }, {
 128                 .name           = "root (ro)",
 129                 .offset         = (SZ_2M),
 130                 .size           = (20 * SZ_1M),
 131                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 132         },
 133
 134         /* yaffs */
 135         {
 136                 .name           = "yaffs",
 137                 .offset         = (44 * SZ_1M),
 138                 .size           = (20 * SZ_1M),
 139         },
 140
 141         /* bootloader environment */
 142         {
 143                 .name           = "env",
 144                 .offset         = (160 * SZ_1K),
 145                 .size           = (16 * SZ_1K),
 146         },
 147
 148         /* upgrade images */
 149         {
 150                 .name           = "zimage",
 151                 .offset         = (22 * SZ_1M),
 152                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 153         }, {
 154                 .name           = "cramfs",
 155                 .offset         = (24 * SZ_1M) - (192*SZ_1K),
 156                 .size           = (20 * SZ_1M),
 157         },
 158 };
 159
 160 static struct mtd_partition __initdata jive_imageB_nand_part[] = {
 161
 162 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 163         /* Don't allow access to the bootloader from linux */
 164         {
 165                 .name           = "uboot",
 166                 .offset         = 0,
 167                 .size           = (160 * SZ_1K),
 168                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 169         },
 170
 171         /* spare */
 172         {
 173                 .name           = "spare",
 174                 .offset         = (176 * SZ_1K),
 175                 .size           = (16 * SZ_1K),
 176         },
 177 #endif
 178
 179         /* booted images */
 180         {
 181                 .name           = "kernel (ro)",
 182                 .offset         = (22 * SZ_1M),
 183                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 184                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 185         },
 186         {
 187                 .name           = "root (ro)",
 188                 .offset         = (24 * SZ_1M) - (192 * SZ_1K),
 189                 .size           = (20 * SZ_1M),
 190                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 191         },
 192
 193         /* yaffs */
 194         {
 195                 .name           = "yaffs",
 196                 .offset         = (44 * SZ_1M),
 197                 .size           = (20 * SZ_1M),
 198         },
 199
 200         /* bootloader environment */
 201         {
 202                 .name           = "env",
 203                 .offset         = (160 * SZ_1K),
 204                 .size           = (16 * SZ_1K),
 205         },
 206
 207         /* upgrade images */
 208         {
 209                 .name           = "zimage",
 210                 .offset         = (192 * SZ_1K),
 211                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 212         }, {
 213                 .name           = "cramfs",
 214                 .offset         = (2 * SZ_1M),
 215                 .size           = (20 * SZ_1M),
 216         },
 217 };
 218
 219 static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
 220         [0] = {
 221                 .name           = "flash",
 222                 .nr_chips       = 1,
 223                 .nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
 224                 .partitions     = jive_imageA_nand_part,
 225         },
 226 };
 227
 228 static struct s3c2410_platform_nand __initdata jive_nand_info = {
 229         /* set taken from osiris nand timings, possibly still conservative */
 230         .tacls          = 30,
 231         .twrph0         = 55,
 232         .twrph1         = 40,
 233         .sets           = jive_nand_sets,
 234         .nr_sets        = ARRAY_SIZE(jive_nand_sets),
 235 };
 236
 237 static int __init jive_mtdset(char *options)
 238 {
 239         struct s3c2410_nand_set *nand = &jive_nand_sets[0];
 240         unsigned long set;
 241
 242         if (options == NULL || options[0] == '\0')
 243                 return 0;
 244
 245         if (strict_strtoul(options, 10, &set)) {
 246                 printk(KERN_ERR "failed to parse mtdset=%s\n", options);
 247                 return 0;
 248         }
 249
 250         switch (set) {
 251         case 1:
 252                 nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
 253                 nand->partitions = jive_imageB_nand_part;
 254         case 0:
 255                 /* this is already setup in the nand info */
 256                 break;
 257         default:
 258                 printk(KERN_ERR "Unknown mtd set %ld specified,"
 259                        "using default.", set);
 260         }
 261
 262         return 0;
 263 }
 264
 265 /* parse the mtdset= option given to the kernel command line */
 266 __setup("mtdset=", jive_mtdset);
 267
 268 /* LCD timing and setup */
 269
 270 #define LCD_XRES         (240)
 271 #define LCD_YRES         (320)
 272 #define LCD_LEFT_MARGIN  (12)
 273 #define LCD_RIGHT_MARGIN (12)
 274 #define LCD_LOWER_MARGIN (12)
 275 #define LCD_UPPER_MARGIN (12)
 276 #define LCD_VSYNC        (2)
 277 #define LCD_HSYNC        (2)
 278
 279 #define LCD_REFRESH      (60)
 280
 281 #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
 282 #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
 283
 284 static struct s3c2410fb_display jive_vgg2432a4_display[] = {
 285         [0] = {
 286                 .width          = LCD_XRES,
 287                 .height         = LCD_YRES,
 288                 .xres           = LCD_XRES,
 289                 .yres           = LCD_YRES,
 290                 .left_margin    = LCD_LEFT_MARGIN,
 291                 .right_margin   = LCD_RIGHT_MARGIN,
 292                 .upper_margin   = LCD_UPPER_MARGIN,
 293                 .lower_margin   = LCD_LOWER_MARGIN,
 294                 .hsync_len      = LCD_HSYNC,
 295                 .vsync_len      = LCD_VSYNC,
 296
 297                 .pixclock       = (1000000000000LL /
 298                                    (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
 299
 300                 .bpp            = 16,
 301                 .type           = (S3C2410_LCDCON1_TFT16BPP |
 302                                    S3C2410_LCDCON1_TFT),
 303
 304                 .lcdcon5        = (S3C2410_LCDCON5_FRM565 |
 305                                    S3C2410_LCDCON5_INVVLINE |
 306                                    S3C2410_LCDCON5_INVVFRAME |
 307                                    S3C2410_LCDCON5_INVVDEN |
 308                                    S3C2410_LCDCON5_PWREN),
 309         },
 310 };
 311
 312 /* todo - put into gpio header */
 313
 314 #define S3C2410_GPCCON_MASK(x)  (3 << ((x) * 2))
 315 #define S3C2410_GPDCON_MASK(x)  (3 << ((x) * 2))
 316
 317 static struct s3c2410fb_mach_info jive_lcd_config = {
 318         .displays        = jive_vgg2432a4_display,
 319         .num_displays    = ARRAY_SIZE(jive_vgg2432a4_display),
 320         .default_display = 0,
 321
 322         /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
 323          * and disable the pull down resistors on pins we are using for LCD
 324          * data. */
 325
 326         .gpcup          = (0xf << 1) | (0x3f << 10),
 327
 328         .gpccon         = (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
 329                            S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
 330                            S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
 331                            S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
 332                            S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
 333
 334         .gpccon_mask    = (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
 335                            S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
 336                            S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
 337                            S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
 338                            S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
 339
 340         .gpdup          = (0x3f << 2) | (0x3f << 10),
 341
 342         .gpdcon         = (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
 343                            S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
 344                            S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
 345                            S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
 346                            S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
 347                            S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
 348
 349         .gpdcon_mask    = (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
 350                            S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
 351                            S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
 352                            S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
 353                            S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
 354                            S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
 355 };
 356
 357 /* ILI9320 support. */
 358
 359 static void jive_lcm_reset(unsigned int set)
 360 {
 361         printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 362
 363         gpio_set_value(S3C2410_GPG(13), set);
 364 }
 365
 366 #undef LCD_UPPER_MARGIN
 367 #define LCD_UPPER_MARGIN 2
 368
 369 static struct ili9320_platdata jive_lcm_config = {
 370         .hsize          = LCD_XRES,
 371         .vsize          = LCD_YRES,
 372
 373         .reset          = jive_lcm_reset,
 374         .suspend        = ILI9320_SUSPEND_DEEP,
 375
 376         .entry_mode     = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
 377         .display2       = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
 378                            ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
 379         .display3       = 0x0,
 380         .display4       = 0x0,
 381         .rgb_if1        = (ILI9320_RGBIF1_RIM_RGB18 |
 382                            ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
 383         .rgb_if2        = ILI9320_RGBIF2_DPL,
 384         .interface2     = 0x0,
 385         .interface3     = 0x3,
 386         .interface4     = (ILI9320_INTERFACE4_RTNE(16) |
 387                            ILI9320_INTERFACE4_DIVE(1)),
 388         .interface5     = 0x0,
 389         .interface6     = 0x0,
 390 };
 391
 392 /* LCD SPI support */
 393
 394 static struct spi_gpio_platform_data jive_lcd_spi = {
 395         .sck            = S3C2410_GPG(8),
 396         .mosi           = S3C2410_GPB(8),
 397         .miso           = SPI_GPIO_NO_MISO,
 398 };
 399
 400 static struct platform_device jive_device_lcdspi = {
 401         .name           = "spi-gpio",
 402         .id             = 1,
 403         .dev.platform_data = &jive_lcd_spi,
 404 };
 405
 406
 407 /* WM8750 audio code SPI definition */
 408
 409 static struct spi_gpio_platform_data jive_wm8750_spi = {
 410         .sck            = S3C2410_GPB(4),
 411         .mosi           = S3C2410_GPB(9),
 412         .miso           = SPI_GPIO_NO_MISO,
 413 };
 414
 415 static struct platform_device jive_device_wm8750 = {
 416         .name           = "spi-gpio",
 417         .id             = 2,
 418         .dev.platform_data = &jive_wm8750_spi,
 419 };
 420
 421 /* JIVE SPI devices. */
 422
 423 static struct spi_board_info __initdata jive_spi_devs[] = {
 424         [0] = {
 425                 .modalias       = "VGG2432A4",
 426                 .bus_num        = 1,
 427                 .chip_select    = 0,
 428                 .mode           = SPI_MODE_3,   /* CPOL=1, CPHA=1 */
 429                 .max_speed_hz   = 100000,
 430                 .platform_data  = &jive_lcm_config,
 431                 .controller_data = (void *)S3C2410_GPB(7),
 432         }, {
 433                 .modalias       = "WM8750",
 434                 .bus_num        = 2,
 435                 .chip_select    = 0,
 436                 .mode           = SPI_MODE_0,   /* CPOL=0, CPHA=0 */
 437                 .max_speed_hz   = 100000,
 438                 .controller_data = (void *)S3C2410_GPH(10),
 439         },
 440 };
 441
 442 /* I2C bus and device configuration. */
 443
 444 static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
 445         .frequency      = 80 * 1000,
 446         .flags          = S3C_IICFLG_FILTER,
 447         .sda_delay      = 2,
 448 };
 449
 450 static struct i2c_board_info jive_i2c_devs[] __initdata = {
 451         [0] = {
 452                 I2C_BOARD_INFO("lis302dl", 0x1c),
 453                 .irq    = IRQ_EINT14,
 454         },
 455 };
 456
 457 /* The platform devices being used. */
 458
 459 static struct platform_device *jive_devices[] __initdata = {
 460         &s3c_device_ohci,
 461         &s3c_device_rtc,
 462         &s3c_device_wdt,
 463         &s3c_device_i2c0,
 464         &s3c_device_lcd,
 465         &jive_device_lcdspi,
 466         &jive_device_wm8750,
 467         &s3c_device_nand,
 468         &s3c_device_usbgadget,
 469 };
 470
 471 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
 472         .vbus_pin       = S3C2410_GPG(1),               /* detect is on GPG1 */
 473 };
 474
 475 /* Jive power management device */
 476
 477 #ifdef CONFIG_PM
 478 static int jive_pm_suspend(void)
 479 {
 480         /* Write the magic value u-boot uses to check for resume into
 481          * the INFORM0 register, and ensure INFORM1 is set to the
 482          * correct address to resume from. */
 483
 484         __raw_writel(0x2BED, S3C2412_INFORM0);
 485         __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
 486
 487         return 0;
 488 }
 489
 490 static void jive_pm_resume(void)
 491 {
 492         __raw_writel(0x0, S3C2412_INFORM0);
 493 }
 494
 495 #else
 496 #define jive_pm_suspend NULL
 497 #define jive_pm_resume NULL
 498 #endif
 499
 500 static struct syscore_ops jive_pm_syscore_ops = {
 501         .suspend        = jive_pm_suspend,
 502         .resume         = jive_pm_resume,
 503 };
 504
 505 static void __init jive_map_io(void)
 506 {
 507         s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
 508         s3c24xx_init_clocks(12000000);
 509         s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 510         samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 511 }
 512
 513 static void jive_power_off(void)
 514 {
 515         printk(KERN_INFO "powering system down...\n");
 516
 517         gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
 518         gpio_free(S3C2410_GPC(5));
 519 }
 520
 521 static void __init jive_machine_init(void)
 522 {
 523         /* register system core operations for managing low level suspend */
 524
 525         register_syscore_ops(&jive_pm_syscore_ops);
 526
 527         /* write our sleep configurations for the IO. Pull down all unused
 528          * IO, ensure that we have turned off all peripherals we do not
 529          * need, and configure the ones we do need. */
 530
 531         /* Port B sleep */
 532
 533         __raw_writel(S3C2412_SLPCON_IN(0)   |
 534                      S3C2412_SLPCON_PULL(1) |
 535                      S3C2412_SLPCON_HIGH(2) |
 536                      S3C2412_SLPCON_PULL(3) |
 537                      S3C2412_SLPCON_PULL(4) |
 538                      S3C2412_SLPCON_PULL(5) |
 539                      S3C2412_SLPCON_PULL(6) |
 540                      S3C2412_SLPCON_HIGH(7) |
 541                      S3C2412_SLPCON_PULL(8) |
 542                      S3C2412_SLPCON_PULL(9) |
 543                      S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
 544
 545         /* Port C sleep */
 546
 547         __raw_writel(S3C2412_SLPCON_PULL(0) |
 548                      S3C2412_SLPCON_PULL(1) |
 549                      S3C2412_SLPCON_PULL(2) |
 550                      S3C2412_SLPCON_PULL(3) |
 551                      S3C2412_SLPCON_PULL(4) |
 552                      S3C2412_SLPCON_PULL(5) |
 553                      S3C2412_SLPCON_LOW(6)  |
 554                      S3C2412_SLPCON_PULL(6) |
 555                      S3C2412_SLPCON_PULL(7) |
 556                      S3C2412_SLPCON_PULL(8) |
 557                      S3C2412_SLPCON_PULL(9) |
 558                      S3C2412_SLPCON_PULL(10) |
 559                      S3C2412_SLPCON_PULL(11) |
 560                      S3C2412_SLPCON_PULL(12) |
 561                      S3C2412_SLPCON_PULL(13) |
 562                      S3C2412_SLPCON_PULL(14) |
 563                      S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
 564
 565         /* Port D sleep */
 566
 567         __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
 568
 569         /* Port F sleep */
 570
 571         __raw_writel(S3C2412_SLPCON_LOW(0)  |
 572                      S3C2412_SLPCON_LOW(1)  |
 573                      S3C2412_SLPCON_LOW(2)  |
 574                      S3C2412_SLPCON_EINT(3) |
 575                      S3C2412_SLPCON_EINT(4) |
 576                      S3C2412_SLPCON_EINT(5) |
 577                      S3C2412_SLPCON_EINT(6) |
 578                      S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
 579
 580         /* Port G sleep */
 581
 582         __raw_writel(S3C2412_SLPCON_IN(0)    |
 583                      S3C2412_SLPCON_IN(1)    |
 584                      S3C2412_SLPCON_IN(2)    |
 585                      S3C2412_SLPCON_IN(3)    |
 586                      S3C2412_SLPCON_IN(4)    |
 587                      S3C2412_SLPCON_IN(5)    |
 588                      S3C2412_SLPCON_IN(6)    |
 589                      S3C2412_SLPCON_IN(7)    |
 590                      S3C2412_SLPCON_PULL(8)  |
 591                      S3C2412_SLPCON_PULL(9)  |
 592                      S3C2412_SLPCON_IN(10)   |
 593                      S3C2412_SLPCON_PULL(11) |
 594                      S3C2412_SLPCON_PULL(12) |
 595                      S3C2412_SLPCON_PULL(13) |
 596                      S3C2412_SLPCON_IN(14)   |
 597                      S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
 598
 599         /* Port H sleep */
 600
 601         __raw_writel(S3C2412_SLPCON_PULL(0) |
 602                      S3C2412_SLPCON_PULL(1) |
 603                      S3C2412_SLPCON_PULL(2) |
 604                      S3C2412_SLPCON_PULL(3) |
 605                      S3C2412_SLPCON_PULL(4) |
 606                      S3C2412_SLPCON_PULL(5) |
 607                      S3C2412_SLPCON_PULL(6) |
 608                      S3C2412_SLPCON_IN(7)   |
 609                      S3C2412_SLPCON_IN(8)   |
 610                      S3C2412_SLPCON_PULL(9) |
 611                      S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
 612
 613         /* initialise the power management now we've setup everything. */
 614
 615         s3c_pm_init();
 616
 617         /** TODO - check that this is after the cmdline option! */
 618         s3c_nand_set_platdata(&jive_nand_info);
 619
 620         /* initialise the spi */
 621
 622         gpio_request(S3C2410_GPG(13), "lcm reset");
 623         gpio_direction_output(S3C2410_GPG(13), 0);
 624
 625         gpio_request(S3C2410_GPB(7), "jive spi");
 626         gpio_direction_output(S3C2410_GPB(7), 1);
 627
 628         gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
 629         gpio_free(S3C2410_GPB(6));
 630
 631         gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL);
 632         gpio_free(S3C2410_GPG(8));
 633
 634         /* initialise the WM8750 spi */
 635
 636         gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
 637         gpio_direction_output(S3C2410_GPH(10), 1);
 638
 639         /* Turn off suspend on both USB ports, and switch the
 640          * selectable USB port to USB device mode. */
 641
 642         s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 643                               S3C2410_MISCCR_USBSUSPND0 |
 644                               S3C2410_MISCCR_USBSUSPND1, 0x0);
 645
 646         s3c24xx_udc_set_platdata(&jive_udc_cfg);
 647         s3c24xx_fb_set_platdata(&jive_lcd_config);
 648
 649         spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
 650
 651         s3c_i2c0_set_platdata(&jive_i2c_cfg);
 652         i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 653
 654         pm_power_off = jive_power_off;
 655
 656         platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
 657 }
 658
 659 MACHINE_START(JIVE, "JIVE")
 660         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 661         .atag_offset    = 0x100,
 662
 663         .init_irq       = s3c2412_init_irq,
 664         .map_io         = jive_map_io,
 665         .init_machine   = jive_machine_init,
 666         .init_time      = samsung_timer_init,
 667         .restart        = s3c2412_restart,
 668 MACHINE_END