Merge branch 'for-next-3.17' of git://git.samba.org/sfrench/cifs-2.6

[linux/fpc-iii.git] / drivers / dma / ste_dma40_ll.h

/*
 * Copyright (C) ST-Ericsson SA 2007-2010
 * Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson SA
 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson SA
 * License terms: GNU General Public License (GPL) version 2
 */
#ifndef STE_DMA40_LL_H
#define STE_DMA40_LL_H

#define D40_DREG_PCBASE         0x400
#define D40_DREG_PCDELTA        (8 * 4)
#define D40_LLI_ALIGN           16 /* LLI alignment must be 16 bytes. */

#define D40_LCPA_CHAN_SIZE 32
#define D40_LCPA_CHAN_DST_DELTA 16

#define D40_TYPE_TO_GROUP(type) (type / 16)
#define D40_TYPE_TO_EVENT(type) (type % 16)
#define D40_GROUP_SIZE 8
#define D40_PHYS_TO_GROUP(phys) ((phys & (D40_GROUP_SIZE - 1)) / 2)

/* Most bits of the CFG register are the same in log as in phy mode */
#define D40_SREG_CFG_MST_POS            15
#define D40_SREG_CFG_TIM_POS            14
#define D40_SREG_CFG_EIM_POS            13
#define D40_SREG_CFG_LOG_INCR_POS       12
#define D40_SREG_CFG_PHY_PEN_POS        12
#define D40_SREG_CFG_PSIZE_POS          10
#define D40_SREG_CFG_ESIZE_POS           8
#define D40_SREG_CFG_PRI_POS             7
#define D40_SREG_CFG_LBE_POS             6
#define D40_SREG_CFG_LOG_GIM_POS         5
#define D40_SREG_CFG_LOG_MFU_POS         4
#define D40_SREG_CFG_PHY_TM_POS          4
#define D40_SREG_CFG_PHY_EVTL_POS        0


/* Standard channel parameters - basic mode (element register) */
#define D40_SREG_ELEM_PHY_ECNT_POS      16
#define D40_SREG_ELEM_PHY_EIDX_POS       0

#define D40_SREG_ELEM_PHY_ECNT_MASK     (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS)

/* Standard channel parameters - basic mode (Link register) */
#define D40_SREG_LNK_PHY_TCP_POS        0
#define D40_SREG_LNK_PHY_LMP_POS        1
#define D40_SREG_LNK_PHY_PRE_POS        2
/*
 * Source  destination link address. Contains the
 * 29-bit byte word aligned address of the reload area.
 */
#define D40_SREG_LNK_PHYS_LNK_MASK      0xFFFFFFF8UL

/* Standard basic channel logical mode */

/* Element register */
#define D40_SREG_ELEM_LOG_ECNT_POS      16
#define D40_SREG_ELEM_LOG_LIDX_POS       8
#define D40_SREG_ELEM_LOG_LOS_POS        1
#define D40_SREG_ELEM_LOG_TCP_POS        0

#define D40_SREG_ELEM_LOG_LIDX_MASK     (0xFF << D40_SREG_ELEM_LOG_LIDX_POS)

/* Link register */
#define D40_EVENTLINE_POS(i)            (2 * i)
#define D40_EVENTLINE_MASK(i)           (0x3 << D40_EVENTLINE_POS(i))

/* Standard basic channel logical params in memory */

/* LCSP0 */
#define D40_MEM_LCSP0_ECNT_POS          16
#define D40_MEM_LCSP0_SPTR_POS           0

#define D40_MEM_LCSP0_ECNT_MASK         (0xFFFF << D40_MEM_LCSP0_ECNT_POS)
#define D40_MEM_LCSP0_SPTR_MASK         (0xFFFF << D40_MEM_LCSP0_SPTR_POS)

/* LCSP1 */
#define D40_MEM_LCSP1_SPTR_POS          16
#define D40_MEM_LCSP1_SCFG_MST_POS      15
#define D40_MEM_LCSP1_SCFG_TIM_POS      14
#define D40_MEM_LCSP1_SCFG_EIM_POS      13
#define D40_MEM_LCSP1_SCFG_INCR_POS     12
#define D40_MEM_LCSP1_SCFG_PSIZE_POS    10
#define D40_MEM_LCSP1_SCFG_ESIZE_POS     8
#define D40_MEM_LCSP1_SLOS_POS           1
#define D40_MEM_LCSP1_STCP_POS           0

#define D40_MEM_LCSP1_SPTR_MASK         (0xFFFF << D40_MEM_LCSP1_SPTR_POS)
#define D40_MEM_LCSP1_SCFG_TIM_MASK     (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS)
#define D40_MEM_LCSP1_SCFG_INCR_MASK    (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS)
#define D40_MEM_LCSP1_SCFG_PSIZE_MASK   (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS)
#define D40_MEM_LCSP1_SLOS_MASK         (0x7F << D40_MEM_LCSP1_SLOS_POS)
#define D40_MEM_LCSP1_STCP_MASK         (0x1 << D40_MEM_LCSP1_STCP_POS)

/* LCSP2 */
#define D40_MEM_LCSP2_ECNT_POS          16

#define D40_MEM_LCSP2_ECNT_MASK         (0xFFFF << D40_MEM_LCSP2_ECNT_POS)

/* LCSP3 */
#define D40_MEM_LCSP3_DCFG_MST_POS      15
#define D40_MEM_LCSP3_DCFG_TIM_POS      14
#define D40_MEM_LCSP3_DCFG_EIM_POS      13
#define D40_MEM_LCSP3_DCFG_INCR_POS     12
#define D40_MEM_LCSP3_DCFG_PSIZE_POS    10
#define D40_MEM_LCSP3_DCFG_ESIZE_POS     8
#define D40_MEM_LCSP3_DLOS_POS           1
#define D40_MEM_LCSP3_DTCP_POS           0

#define D40_MEM_LCSP3_DLOS_MASK         (0x7F << D40_MEM_LCSP3_DLOS_POS)
#define D40_MEM_LCSP3_DTCP_MASK         (0x1 << D40_MEM_LCSP3_DTCP_POS)


/* Standard channel parameter register offsets */
#define D40_CHAN_REG_SSCFG      0x00
#define D40_CHAN_REG_SSELT      0x04
#define D40_CHAN_REG_SSPTR      0x08
#define D40_CHAN_REG_SSLNK      0x0C
#define D40_CHAN_REG_SDCFG      0x10
#define D40_CHAN_REG_SDELT      0x14
#define D40_CHAN_REG_SDPTR      0x18
#define D40_CHAN_REG_SDLNK      0x1C

/* DMA Register Offsets */
#define D40_DREG_GCC            0x000
#define D40_DREG_GCC_ENA        0x1
/* This assumes that there are only 4 event groups */
#define D40_DREG_GCC_ENABLE_ALL 0x3ff01
#define D40_DREG_GCC_EVTGRP_POS 8
#define D40_DREG_GCC_SRC 0
#define D40_DREG_GCC_DST 1
#define D40_DREG_GCC_EVTGRP_ENA(x, y) \
        (1 << (D40_DREG_GCC_EVTGRP_POS + 2 * x + y))

#define D40_DREG_PRTYP          0x004
#define D40_DREG_PRSME          0x008
#define D40_DREG_PRSMO          0x00C
#define D40_DREG_PRMSE          0x010
#define D40_DREG_PRMSO          0x014
#define D40_DREG_PRMOE          0x018
#define D40_DREG_PRMOO          0x01C
#define D40_DREG_PRMO_PCHAN_BASIC               0x1
#define D40_DREG_PRMO_PCHAN_MODULO              0x2
#define D40_DREG_PRMO_PCHAN_DOUBLE_DST          0x3
#define D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG     0x1
#define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY     0x2
#define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG     0x3

#define D40_DREG_LCPA           0x020
#define D40_DREG_LCLA           0x024

#define D40_DREG_SSEG1          0x030
#define D40_DREG_SSEG2          0x034
#define D40_DREG_SSEG3          0x038
#define D40_DREG_SSEG4          0x03C

#define D40_DREG_SCEG1          0x040
#define D40_DREG_SCEG2          0x044
#define D40_DREG_SCEG3          0x048
#define D40_DREG_SCEG4          0x04C

#define D40_DREG_ACTIVE         0x050
#define D40_DREG_ACTIVO         0x054
#define D40_DREG_CIDMOD         0x058
#define D40_DREG_TCIDV          0x05C
#define D40_DREG_PCMIS          0x060
#define D40_DREG_PCICR          0x064
#define D40_DREG_PCTIS          0x068
#define D40_DREG_PCEIS          0x06C

#define D40_DREG_SPCMIS         0x070
#define D40_DREG_SPCICR         0x074
#define D40_DREG_SPCTIS         0x078
#define D40_DREG_SPCEIS         0x07C

#define D40_DREG_LCMIS0         0x080
#define D40_DREG_LCMIS1         0x084
#define D40_DREG_LCMIS2         0x088
#define D40_DREG_LCMIS3         0x08C
#define D40_DREG_LCICR0         0x090
#define D40_DREG_LCICR1         0x094
#define D40_DREG_LCICR2         0x098
#define D40_DREG_LCICR3         0x09C
#define D40_DREG_LCTIS0         0x0A0
#define D40_DREG_LCTIS1         0x0A4
#define D40_DREG_LCTIS2         0x0A8
#define D40_DREG_LCTIS3         0x0AC
#define D40_DREG_LCEIS0         0x0B0
#define D40_DREG_LCEIS1         0x0B4
#define D40_DREG_LCEIS2         0x0B8
#define D40_DREG_LCEIS3         0x0BC

#define D40_DREG_SLCMIS1        0x0C0
#define D40_DREG_SLCMIS2        0x0C4
#define D40_DREG_SLCMIS3        0x0C8
#define D40_DREG_SLCMIS4        0x0CC

#define D40_DREG_SLCICR1        0x0D0
#define D40_DREG_SLCICR2        0x0D4
#define D40_DREG_SLCICR3        0x0D8
#define D40_DREG_SLCICR4        0x0DC

#define D40_DREG_SLCTIS1        0x0E0
#define D40_DREG_SLCTIS2        0x0E4
#define D40_DREG_SLCTIS3        0x0E8
#define D40_DREG_SLCTIS4        0x0EC

#define D40_DREG_SLCEIS1        0x0F0
#define D40_DREG_SLCEIS2        0x0F4
#define D40_DREG_SLCEIS3        0x0F8
#define D40_DREG_SLCEIS4        0x0FC

#define D40_DREG_FSESS1         0x100
#define D40_DREG_FSESS2         0x104

#define D40_DREG_FSEBS1         0x108
#define D40_DREG_FSEBS2         0x10C

#define D40_DREG_PSEG1          0x110
#define D40_DREG_PSEG2          0x114
#define D40_DREG_PSEG3          0x118
#define D40_DREG_PSEG4          0x11C
#define D40_DREG_PCEG1          0x120
#define D40_DREG_PCEG2          0x124
#define D40_DREG_PCEG3          0x128
#define D40_DREG_PCEG4          0x12C
#define D40_DREG_RSEG1          0x130
#define D40_DREG_RSEG2          0x134
#define D40_DREG_RSEG3          0x138
#define D40_DREG_RSEG4          0x13C
#define D40_DREG_RCEG1          0x140
#define D40_DREG_RCEG2          0x144
#define D40_DREG_RCEG3          0x148
#define D40_DREG_RCEG4          0x14C

#define D40_DREG_PREFOT         0x15C
#define D40_DREG_EXTCFG         0x160

#define D40_DREG_CPSEG1         0x200
#define D40_DREG_CPSEG2         0x204
#define D40_DREG_CPSEG3         0x208
#define D40_DREG_CPSEG4         0x20C
#define D40_DREG_CPSEG5         0x210

#define D40_DREG_CPCEG1         0x220
#define D40_DREG_CPCEG2         0x224
#define D40_DREG_CPCEG3         0x228
#define D40_DREG_CPCEG4         0x22C
#define D40_DREG_CPCEG5         0x230

#define D40_DREG_CRSEG1         0x240
#define D40_DREG_CRSEG2         0x244
#define D40_DREG_CRSEG3         0x248
#define D40_DREG_CRSEG4         0x24C
#define D40_DREG_CRSEG5         0x250

#define D40_DREG_CRCEG1         0x260
#define D40_DREG_CRCEG2         0x264
#define D40_DREG_CRCEG3         0x268
#define D40_DREG_CRCEG4         0x26C
#define D40_DREG_CRCEG5         0x270

#define D40_DREG_CFSESS1        0x280
#define D40_DREG_CFSESS2        0x284
#define D40_DREG_CFSESS3        0x288

#define D40_DREG_CFSEBS1        0x290
#define D40_DREG_CFSEBS2        0x294
#define D40_DREG_CFSEBS3        0x298

#define D40_DREG_CLCMIS1        0x300
#define D40_DREG_CLCMIS2        0x304
#define D40_DREG_CLCMIS3        0x308
#define D40_DREG_CLCMIS4        0x30C
#define D40_DREG_CLCMIS5        0x310

#define D40_DREG_CLCICR1        0x320
#define D40_DREG_CLCICR2        0x324
#define D40_DREG_CLCICR3        0x328
#define D40_DREG_CLCICR4        0x32C
#define D40_DREG_CLCICR5        0x330

#define D40_DREG_CLCTIS1        0x340
#define D40_DREG_CLCTIS2        0x344
#define D40_DREG_CLCTIS3        0x348
#define D40_DREG_CLCTIS4        0x34C
#define D40_DREG_CLCTIS5        0x350

#define D40_DREG_CLCEIS1        0x360
#define D40_DREG_CLCEIS2        0x364
#define D40_DREG_CLCEIS3        0x368
#define D40_DREG_CLCEIS4        0x36C
#define D40_DREG_CLCEIS5        0x370

#define D40_DREG_CPCMIS         0x380
#define D40_DREG_CPCICR         0x384
#define D40_DREG_CPCTIS         0x388
#define D40_DREG_CPCEIS         0x38C

#define D40_DREG_SCCIDA1        0xE80
#define D40_DREG_SCCIDA2        0xE90
#define D40_DREG_SCCIDA3        0xEA0
#define D40_DREG_SCCIDA4        0xEB0
#define D40_DREG_SCCIDA5        0xEC0

#define D40_DREG_SCCIDB1        0xE84
#define D40_DREG_SCCIDB2        0xE94
#define D40_DREG_SCCIDB3        0xEA4
#define D40_DREG_SCCIDB4        0xEB4
#define D40_DREG_SCCIDB5        0xEC4

#define D40_DREG_PRSCCIDA       0xF80
#define D40_DREG_PRSCCIDB       0xF84

#define D40_DREG_STFU           0xFC8
#define D40_DREG_ICFG           0xFCC
#define D40_DREG_PERIPHID0      0xFE0
#define D40_DREG_PERIPHID1      0xFE4
#define D40_DREG_PERIPHID2      0xFE8
#define D40_DREG_PERIPHID3      0xFEC
#define D40_DREG_CELLID0        0xFF0
#define D40_DREG_CELLID1        0xFF4
#define D40_DREG_CELLID2        0xFF8
#define D40_DREG_CELLID3        0xFFC

/* LLI related structures */

/**
 * struct d40_phy_lli - The basic configuration register for each physical
 * channel.
 *
 * @reg_cfg: The configuration register.
 * @reg_elt: The element register.
 * @reg_ptr: The pointer register.
 * @reg_lnk: The link register.
 *
 * These registers are set up for both physical and logical transfers
 * Note that the bit in each register means differently in logical and
 * physical(standard) mode.
 *
 * This struct must be 16 bytes aligned, and only contain physical registers
 * since it will be directly accessed by the DMA.
 */
struct d40_phy_lli {
        u32 reg_cfg;
        u32 reg_elt;
        u32 reg_ptr;
        u32 reg_lnk;
};

/**
 * struct d40_phy_lli_bidir - struct for a transfer.
 *
 * @src: Register settings for src channel.
 * @dst: Register settings for dst channel.
 *
 * All DMA transfers have a source and a destination.
 */

struct d40_phy_lli_bidir {
        struct d40_phy_lli      *src;
        struct d40_phy_lli      *dst;
};


/**
 * struct d40_log_lli - logical lli configuration
 *
 * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
 * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
 *
 * This struct must be 8 bytes aligned since it will be accessed directy by
 * the DMA. Never add any none hw mapped registers to this struct.
 */

struct d40_log_lli {
        u32 lcsp02;
        u32 lcsp13;
};

/**
 * struct d40_log_lli_bidir - For both src and dst
 *
 * @src: pointer to src lli configuration.
 * @dst: pointer to dst lli configuration.
 *
 * You always have a src and a dst when doing DMA transfers.
 */

struct d40_log_lli_bidir {
        struct d40_log_lli *src;
        struct d40_log_lli *dst;
};

/**
 * struct d40_log_lli_full - LCPA layout
 *
 * @lcsp0: Logical Channel Standard Param 0 - Src.
 * @lcsp1: Logical Channel Standard Param 1 - Src.
 * @lcsp2: Logical Channel Standard Param 2 - Dst.
 * @lcsp3: Logical Channel Standard Param 3 - Dst.
 *
 * This struct maps to LCPA physical memory layout. Must map to
 * the hw.
 */
struct d40_log_lli_full {
        u32 lcsp0;
        u32 lcsp1;
        u32 lcsp2;
        u32 lcsp3;
};

/**
 * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings
 *
 * @lcsp3: The default configuration for dst.
 * @lcsp1: The default configuration for src.
 */
struct d40_def_lcsp {
        u32 lcsp3;
        u32 lcsp1;
};

/* Physical channels */

enum d40_lli_flags {
        LLI_ADDR_INC    = 1 << 0,
        LLI_TERM_INT    = 1 << 1,
        LLI_CYCLIC      = 1 << 2,
        LLI_LAST_LINK   = 1 << 3,
};

void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
                 u32 *src_cfg,
                 u32 *dst_cfg);

void d40_log_cfg(struct stedma40_chan_cfg *cfg,
                 u32 *lcsp1,
                 u32 *lcsp2);

int d40_phy_sg_to_lli(struct scatterlist *sg,
                      int sg_len,
                      dma_addr_t target,
                      struct d40_phy_lli *lli,
                      dma_addr_t lli_phys,
                      u32 reg_cfg,
                      struct stedma40_half_channel_info *info,
                      struct stedma40_half_channel_info *otherinfo,
                      unsigned long flags);

/* Logical channels */

int d40_log_sg_to_lli(struct scatterlist *sg,
                      int sg_len,
                      dma_addr_t dev_addr,
                      struct d40_log_lli *lli_sg,
                      u32 lcsp13, /* src or dst*/
                      u32 data_width1, u32 data_width2);

void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
                            struct d40_log_lli *lli_dst,
                            struct d40_log_lli *lli_src,
                            int next, unsigned int flags);

void d40_log_lli_lcla_write(struct d40_log_lli *lcla,
                            struct d40_log_lli *lli_dst,
                            struct d40_log_lli *lli_src,
                            int next, unsigned int flags);

#endif /* STE_DMA40_LLI_H */