PCI: altera: Fix altera_pcie_link_is_up()
[linux/fpc-iii.git] / drivers / input / touchscreen / 88pm860x-ts.c
blob7a0dbce4dae9399e0555f9e430d363858b5a65d8
1 /*
2 * Touchscreen driver for Marvell 88PM860x
4 * Copyright (C) 2009 Marvell International Ltd.
5 * Haojian Zhuang <haojian.zhuang@marvell.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/platform_device.h>
15 #include <linux/i2c.h>
16 #include <linux/input.h>
17 #include <linux/mfd/88pm860x.h>
18 #include <linux/slab.h>
19 #include <linux/device.h>
21 #define MEAS_LEN (8)
22 #define ACCURATE_BIT (12)
24 /* touch register */
25 #define MEAS_EN3 (0x52)
27 #define MEAS_TSIX_1 (0x8D)
28 #define MEAS_TSIX_2 (0x8E)
29 #define MEAS_TSIY_1 (0x8F)
30 #define MEAS_TSIY_2 (0x90)
31 #define MEAS_TSIZ1_1 (0x91)
32 #define MEAS_TSIZ1_2 (0x92)
33 #define MEAS_TSIZ2_1 (0x93)
34 #define MEAS_TSIZ2_2 (0x94)
36 /* bit definitions of touch */
37 #define MEAS_PD_EN (1 << 3)
38 #define MEAS_TSIX_EN (1 << 4)
39 #define MEAS_TSIY_EN (1 << 5)
40 #define MEAS_TSIZ1_EN (1 << 6)
41 #define MEAS_TSIZ2_EN (1 << 7)
43 struct pm860x_touch {
44 struct input_dev *idev;
45 struct i2c_client *i2c;
46 struct pm860x_chip *chip;
47 int irq;
48 int res_x; /* resistor of Xplate */
51 static irqreturn_t pm860x_touch_handler(int irq, void *data)
53 struct pm860x_touch *touch = data;
54 struct pm860x_chip *chip = touch->chip;
55 unsigned char buf[MEAS_LEN];
56 int x, y, pen_down;
57 int z1, z2, rt = 0;
58 int ret;
60 ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf);
61 if (ret < 0)
62 goto out;
64 pen_down = buf[1] & (1 << 6);
65 x = ((buf[0] & 0xFF) << 4) | (buf[1] & 0x0F);
66 y = ((buf[2] & 0xFF) << 4) | (buf[3] & 0x0F);
67 z1 = ((buf[4] & 0xFF) << 4) | (buf[5] & 0x0F);
68 z2 = ((buf[6] & 0xFF) << 4) | (buf[7] & 0x0F);
70 if (pen_down) {
71 if ((x != 0) && (z1 != 0) && (touch->res_x != 0)) {
72 rt = z2 / z1 - 1;
73 rt = (rt * touch->res_x * x) >> ACCURATE_BIT;
74 dev_dbg(chip->dev, "z1:%d, z2:%d, rt:%d\n",
75 z1, z2, rt);
77 input_report_abs(touch->idev, ABS_X, x);
78 input_report_abs(touch->idev, ABS_Y, y);
79 input_report_abs(touch->idev, ABS_PRESSURE, rt);
80 input_report_key(touch->idev, BTN_TOUCH, 1);
81 dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y);
82 } else {
83 input_report_abs(touch->idev, ABS_PRESSURE, 0);
84 input_report_key(touch->idev, BTN_TOUCH, 0);
85 dev_dbg(chip->dev, "pen release\n");
87 input_sync(touch->idev);
89 out:
90 return IRQ_HANDLED;
93 static int pm860x_touch_open(struct input_dev *dev)
95 struct pm860x_touch *touch = input_get_drvdata(dev);
96 int data, ret;
98 data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN
99 | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN;
100 ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data);
101 if (ret < 0)
102 goto out;
103 return 0;
104 out:
105 return ret;
108 static void pm860x_touch_close(struct input_dev *dev)
110 struct pm860x_touch *touch = input_get_drvdata(dev);
111 int data;
113 data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN
114 | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN;
115 pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0);
118 #ifdef CONFIG_OF
119 static int pm860x_touch_dt_init(struct platform_device *pdev,
120 struct pm860x_chip *chip,
121 int *res_x)
123 struct device_node *np = pdev->dev.parent->of_node;
124 struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
125 : chip->companion;
126 int data, n, ret;
127 if (!np)
128 return -ENODEV;
129 np = of_get_child_by_name(np, "touch");
130 if (!np) {
131 dev_err(&pdev->dev, "Can't find touch node\n");
132 return -EINVAL;
134 /* set GPADC MISC1 register */
135 data = 0;
136 if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-prebias", &n))
137 data |= (n << 1) & PM8607_GPADC_PREBIAS_MASK;
138 if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-slot-cycle", &n))
139 data |= (n << 3) & PM8607_GPADC_SLOT_CYCLE_MASK;
140 if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-off-scale", &n))
141 data |= (n << 5) & PM8607_GPADC_OFF_SCALE_MASK;
142 if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-sw-cal", &n))
143 data |= (n << 7) & PM8607_GPADC_SW_CAL_MASK;
144 if (data) {
145 ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data);
146 if (ret < 0)
147 goto err_put_node;
149 /* set tsi prebias time */
150 if (!of_property_read_u32(np, "marvell,88pm860x-tsi-prebias", &data)) {
151 ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data);
152 if (ret < 0)
153 goto err_put_node;
155 /* set prebias & prechg time of pen detect */
156 data = 0;
157 if (!of_property_read_u32(np, "marvell,88pm860x-pen-prebias", &n))
158 data |= n & PM8607_PD_PREBIAS_MASK;
159 if (!of_property_read_u32(np, "marvell,88pm860x-pen-prechg", &n))
160 data |= n & PM8607_PD_PRECHG_MASK;
161 if (data) {
162 ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data);
163 if (ret < 0)
164 goto err_put_node;
166 of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x);
168 of_node_put(np);
170 return 0;
172 err_put_node:
173 of_node_put(np);
175 return -EINVAL;
177 #else
178 #define pm860x_touch_dt_init(x, y, z) (-1)
179 #endif
181 static int pm860x_touch_probe(struct platform_device *pdev)
183 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
184 struct pm860x_touch_pdata *pdata = dev_get_platdata(&pdev->dev);
185 struct pm860x_touch *touch;
186 struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
187 : chip->companion;
188 int irq, ret, res_x = 0, data = 0;
190 irq = platform_get_irq(pdev, 0);
191 if (irq < 0) {
192 dev_err(&pdev->dev, "No IRQ resource!\n");
193 return -EINVAL;
196 if (pm860x_touch_dt_init(pdev, chip, &res_x)) {
197 if (pdata) {
198 /* set GPADC MISC1 register */
199 data = 0;
200 data |= (pdata->gpadc_prebias << 1)
201 & PM8607_GPADC_PREBIAS_MASK;
202 data |= (pdata->slot_cycle << 3)
203 & PM8607_GPADC_SLOT_CYCLE_MASK;
204 data |= (pdata->off_scale << 5)
205 & PM8607_GPADC_OFF_SCALE_MASK;
206 data |= (pdata->sw_cal << 7)
207 & PM8607_GPADC_SW_CAL_MASK;
208 if (data) {
209 ret = pm860x_reg_write(i2c,
210 PM8607_GPADC_MISC1, data);
211 if (ret < 0)
212 return -EINVAL;
214 /* set tsi prebias time */
215 if (pdata->tsi_prebias) {
216 data = pdata->tsi_prebias;
217 ret = pm860x_reg_write(i2c,
218 PM8607_TSI_PREBIAS, data);
219 if (ret < 0)
220 return -EINVAL;
222 /* set prebias & prechg time of pen detect */
223 data = 0;
224 data |= pdata->pen_prebias
225 & PM8607_PD_PREBIAS_MASK;
226 data |= (pdata->pen_prechg << 5)
227 & PM8607_PD_PRECHG_MASK;
228 if (data) {
229 ret = pm860x_reg_write(i2c,
230 PM8607_PD_PREBIAS, data);
231 if (ret < 0)
232 return -EINVAL;
234 res_x = pdata->res_x;
235 } else {
236 dev_err(&pdev->dev, "failed to get platform data\n");
237 return -EINVAL;
240 /* enable GPADC */
241 ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1, PM8607_GPADC_EN,
242 PM8607_GPADC_EN);
243 if (ret)
244 return ret;
246 touch = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_touch),
247 GFP_KERNEL);
248 if (!touch)
249 return -ENOMEM;
251 platform_set_drvdata(pdev, touch);
253 touch->idev = devm_input_allocate_device(&pdev->dev);
254 if (!touch->idev) {
255 dev_err(&pdev->dev, "Failed to allocate input device!\n");
256 return -ENOMEM;
259 touch->idev->name = "88pm860x-touch";
260 touch->idev->phys = "88pm860x/input0";
261 touch->idev->id.bustype = BUS_I2C;
262 touch->idev->dev.parent = &pdev->dev;
263 touch->idev->open = pm860x_touch_open;
264 touch->idev->close = pm860x_touch_close;
265 touch->chip = chip;
266 touch->i2c = i2c;
267 touch->irq = irq;
268 touch->res_x = res_x;
269 input_set_drvdata(touch->idev, touch);
271 ret = devm_request_threaded_irq(&pdev->dev, touch->irq, NULL,
272 pm860x_touch_handler, IRQF_ONESHOT,
273 "touch", touch);
274 if (ret < 0)
275 return ret;
277 __set_bit(EV_ABS, touch->idev->evbit);
278 __set_bit(ABS_X, touch->idev->absbit);
279 __set_bit(ABS_Y, touch->idev->absbit);
280 __set_bit(ABS_PRESSURE, touch->idev->absbit);
281 __set_bit(EV_SYN, touch->idev->evbit);
282 __set_bit(EV_KEY, touch->idev->evbit);
283 __set_bit(BTN_TOUCH, touch->idev->keybit);
285 input_set_abs_params(touch->idev, ABS_X, 0, 1 << ACCURATE_BIT, 0, 0);
286 input_set_abs_params(touch->idev, ABS_Y, 0, 1 << ACCURATE_BIT, 0, 0);
287 input_set_abs_params(touch->idev, ABS_PRESSURE, 0, 1 << ACCURATE_BIT,
288 0, 0);
290 ret = input_register_device(touch->idev);
291 if (ret < 0) {
292 dev_err(chip->dev, "Failed to register touch!\n");
293 return ret;
296 platform_set_drvdata(pdev, touch);
297 return 0;
300 static struct platform_driver pm860x_touch_driver = {
301 .driver = {
302 .name = "88pm860x-touch",
304 .probe = pm860x_touch_probe,
306 module_platform_driver(pm860x_touch_driver);
308 MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x");
309 MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
310 MODULE_LICENSE("GPL");
311 MODULE_ALIAS("platform:88pm860x-touch");