drivers/soc/tegra/regulators-tegra30.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Voltage regulators coupler for NVIDIA Tegra30
   4  * Copyright (C) 2019 GRATE-DRIVER project
   5  *
   6  * Voltage constraints borrowed from downstream kernel sources
   7  * Copyright (C) 2010-2011 NVIDIA Corporation
   8  */
   9
  10 #define pr_fmt(fmt)     "tegra voltage-coupler: " fmt
  11
  12 #include <linux/init.h>
  13 #include <linux/kernel.h>
  14 #include <linux/of.h>
  15 #include <linux/regulator/coupler.h>
  16 #include <linux/regulator/driver.h>
  17 #include <linux/regulator/machine.h>
  18
  19 #include <soc/tegra/fuse.h>
  20
  21 struct tegra_regulator_coupler {
  22         struct regulator_coupler coupler;
  23         struct regulator_dev *core_rdev;
  24         struct regulator_dev *cpu_rdev;
  25         int core_min_uV;
  26 };
  27
  28 static inline struct tegra_regulator_coupler *
  29 to_tegra_coupler(struct regulator_coupler *coupler)
  30 {
  31         return container_of(coupler, struct tegra_regulator_coupler, coupler);
  32 }
  33
  34 static int tegra30_core_limit(struct tegra_regulator_coupler *tegra,
  35                               struct regulator_dev *core_rdev)
  36 {
  37         int core_min_uV = 0;
  38         int core_max_uV;
  39         int core_cur_uV;
  40         int err;
  41
  42         if (tegra->core_min_uV > 0)
  43                 return tegra->core_min_uV;
  44
  45         core_cur_uV = regulator_get_voltage_rdev(core_rdev);
  46         if (core_cur_uV < 0)
  47                 return core_cur_uV;
  48
  49         core_max_uV = max(core_cur_uV, 1200000);
  50
  51         err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
  52         if (err)
  53                 return err;
  54
  55         /*
  56          * Limit minimum CORE voltage to a value left from bootloader or,
  57          * if it's unreasonably low value, to the most common 1.2v or to
  58          * whatever maximum value defined via board's device-tree.
  59          */
  60         tegra->core_min_uV = core_max_uV;
  61
  62         pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
  63
  64         return tegra->core_min_uV;
  65 }
  66
  67 static int tegra30_core_cpu_limit(int cpu_uV)
  68 {
  69         if (cpu_uV < 800000)
  70                 return 950000;
  71
  72         if (cpu_uV < 900000)
  73                 return 1000000;
  74
  75         if (cpu_uV < 1000000)
  76                 return 1100000;
  77
  78         if (cpu_uV < 1100000)
  79                 return 1200000;
  80
  81         if (cpu_uV < 1250000) {
  82                 switch (tegra_sku_info.cpu_speedo_id) {
  83                 case 0 ... 1:
  84                 case 4:
  85                 case 7 ... 8:
  86                         return 1200000;
  87
  88                 default:
  89                         return 1300000;
  90                 }
  91         }
  92
  93         return -EINVAL;
  94 }
  95
  96 static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra,
  97                                   struct regulator_dev *cpu_rdev,
  98                                   struct regulator_dev *core_rdev)
  99 {
 100         int core_min_uV, core_max_uV = INT_MAX;
 101         int cpu_min_uV, cpu_max_uV = INT_MAX;
 102         int cpu_min_uV_consumers = 0;
 103         int core_min_limited_uV;
 104         int core_target_uV;
 105         int cpu_target_uV;
 106         int core_max_step;
 107         int cpu_max_step;
 108         int max_spread;
 109         int core_uV;
 110         int cpu_uV;
 111         int err;
 112
 113         /*
 114          * CPU voltage should not got lower than 300mV from the CORE.
 115          * CPU voltage should stay below the CORE by 100mV+, depending
 116          * by the CORE voltage. This applies to all Tegra30 SoC's.
 117          */
 118         max_spread = cpu_rdev->constraints->max_spread[0];
 119         cpu_max_step = cpu_rdev->constraints->max_uV_step;
 120         core_max_step = core_rdev->constraints->max_uV_step;
 121
 122         if (!max_spread) {
 123                 pr_err_once("cpu-core max-spread is undefined in device-tree\n");
 124                 max_spread = 300000;
 125         }
 126
 127         if (!cpu_max_step) {
 128                 pr_err_once("cpu max-step is undefined in device-tree\n");
 129                 cpu_max_step = 150000;
 130         }
 131
 132         if (!core_max_step) {
 133                 pr_err_once("core max-step is undefined in device-tree\n");
 134                 core_max_step = 150000;
 135         }
 136
 137         /*
 138          * The CORE voltage scaling is currently not hooked up in drivers,
 139          * hence we will limit the minimum CORE voltage to a reasonable value.
 140          * This should be good enough for the time being.
 141          */
 142         core_min_uV = tegra30_core_limit(tegra, core_rdev);
 143         if (core_min_uV < 0)
 144                 return core_min_uV;
 145
 146         err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV,
 147                                         PM_SUSPEND_ON);
 148         if (err)
 149                 return err;
 150
 151         core_uV = regulator_get_voltage_rdev(core_rdev);
 152         if (core_uV < 0)
 153                 return core_uV;
 154
 155         cpu_min_uV = core_min_uV - max_spread;
 156
 157         err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV,
 158                                         PM_SUSPEND_ON);
 159         if (err)
 160                 return err;
 161
 162         err = regulator_check_consumers(cpu_rdev, &cpu_min_uV_consumers,
 163                                         &cpu_max_uV, PM_SUSPEND_ON);
 164         if (err)
 165                 return err;
 166
 167         err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV);
 168         if (err)
 169                 return err;
 170
 171         cpu_uV = regulator_get_voltage_rdev(cpu_rdev);
 172         if (cpu_uV < 0)
 173                 return cpu_uV;
 174
 175         /*
 176          * CPU's regulator may not have any consumers, hence the voltage
 177          * must not be changed in that case because CPU simply won't
 178          * survive the voltage drop if it's running on a higher frequency.
 179          */
 180         if (!cpu_min_uV_consumers)
 181                 cpu_min_uV = cpu_uV;
 182
 183         /*
 184          * Bootloader shall set up voltages correctly, but if it
 185          * happens that there is a violation, then try to fix it
 186          * at first.
 187          */
 188         core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV);
 189         if (core_min_limited_uV < 0)
 190                 return core_min_limited_uV;
 191
 192         core_min_uV = max(core_min_uV, tegra30_core_cpu_limit(cpu_min_uV));
 193
 194         err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
 195         if (err)
 196                 return err;
 197
 198         if (core_min_limited_uV > core_uV) {
 199                 pr_err("core voltage constraint violated: %d %d %d\n",
 200                        core_uV, core_min_limited_uV, cpu_uV);
 201                 goto update_core;
 202         }
 203
 204         while (cpu_uV != cpu_min_uV || core_uV != core_min_uV) {
 205                 if (cpu_uV < cpu_min_uV) {
 206                         cpu_target_uV = min(cpu_uV + cpu_max_step, cpu_min_uV);
 207                 } else {
 208                         cpu_target_uV = max(cpu_uV - cpu_max_step, cpu_min_uV);
 209                         cpu_target_uV = max(core_uV - max_spread, cpu_target_uV);
 210                 }
 211
 212                 if (cpu_uV == cpu_target_uV)
 213                         goto update_core;
 214
 215                 err = regulator_set_voltage_rdev(cpu_rdev,
 216                                                  cpu_target_uV,
 217                                                  cpu_max_uV,
 218                                                  PM_SUSPEND_ON);
 219                 if (err)
 220                         return err;
 221
 222                 cpu_uV = cpu_target_uV;
 223 update_core:
 224                 core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV);
 225                 if (core_min_limited_uV < 0)
 226                         return core_min_limited_uV;
 227
 228                 core_target_uV = max(core_min_limited_uV, core_min_uV);
 229
 230                 if (core_uV < core_target_uV) {
 231                         core_target_uV = min(core_target_uV, core_uV + core_max_step);
 232                         core_target_uV = min(core_target_uV, cpu_uV + max_spread);
 233                 } else {
 234                         core_target_uV = max(core_target_uV, core_uV - core_max_step);
 235                 }
 236
 237                 if (core_uV == core_target_uV)
 238                         continue;
 239
 240                 err = regulator_set_voltage_rdev(core_rdev,
 241                                                  core_target_uV,
 242                                                  core_max_uV,
 243                                                  PM_SUSPEND_ON);
 244                 if (err)
 245                         return err;
 246
 247                 core_uV = core_target_uV;
 248         }
 249
 250         return 0;
 251 }
 252
 253 static int tegra30_regulator_balance_voltage(struct regulator_coupler *coupler,
 254                                              struct regulator_dev *rdev,
 255                                              suspend_state_t state)
 256 {
 257         struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
 258         struct regulator_dev *core_rdev = tegra->core_rdev;
 259         struct regulator_dev *cpu_rdev = tegra->cpu_rdev;
 260
 261         if ((core_rdev != rdev && cpu_rdev != rdev) || state != PM_SUSPEND_ON) {
 262                 pr_err("regulators are not coupled properly\n");
 263                 return -EINVAL;
 264         }
 265
 266         return tegra30_voltage_update(tegra, cpu_rdev, core_rdev);
 267 }
 268
 269 static int tegra30_regulator_attach(struct regulator_coupler *coupler,
 270                                     struct regulator_dev *rdev)
 271 {
 272         struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
 273         struct device_node *np = rdev->dev.of_node;
 274
 275         if (of_property_read_bool(np, "nvidia,tegra-core-regulator") &&
 276             !tegra->core_rdev) {
 277                 tegra->core_rdev = rdev;
 278                 return 0;
 279         }
 280
 281         if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") &&
 282             !tegra->cpu_rdev) {
 283                 tegra->cpu_rdev = rdev;
 284                 return 0;
 285         }
 286
 287         return -EINVAL;
 288 }
 289
 290 static int tegra30_regulator_detach(struct regulator_coupler *coupler,
 291                                     struct regulator_dev *rdev)
 292 {
 293         struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
 294
 295         if (tegra->core_rdev == rdev) {
 296                 tegra->core_rdev = NULL;
 297                 return 0;
 298         }
 299
 300         if (tegra->cpu_rdev == rdev) {
 301                 tegra->cpu_rdev = NULL;
 302                 return 0;
 303         }
 304
 305         return -EINVAL;
 306 }
 307
 308 static struct tegra_regulator_coupler tegra30_coupler = {
 309         .coupler = {
 310                 .attach_regulator = tegra30_regulator_attach,
 311                 .detach_regulator = tegra30_regulator_detach,
 312                 .balance_voltage = tegra30_regulator_balance_voltage,
 313         },
 314 };
 315
 316 static int __init tegra_regulator_coupler_init(void)
 317 {
 318         if (!of_machine_is_compatible("nvidia,tegra30"))
 319                 return 0;
 320
 321         return regulator_coupler_register(&tegra30_coupler.coupler);
 322 }
 323 arch_initcall(tegra_regulator_coupler_init);