drivers/gpio/gpio-pcf857x.c

   1 /*
   2  * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders
   3  *
   4  * Copyright (C) 2007 David Brownell
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19  */
  20
  21 #include <linux/gpio.h>
  22 #include <linux/i2c.h>
  23 #include <linux/i2c/pcf857x.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/irq.h>
  26 #include <linux/irqdomain.h>
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/of.h>
  30 #include <linux/of_device.h>
  31 #include <linux/slab.h>
  32 #include <linux/spinlock.h>
  33
  34
  35 static const struct i2c_device_id pcf857x_id[] = {
  36         { "pcf8574", 8 },
  37         { "pcf8574a", 8 },
  38         { "pca8574", 8 },
  39         { "pca9670", 8 },
  40         { "pca9672", 8 },
  41         { "pca9674", 8 },
  42         { "pcf8575", 16 },
  43         { "pca8575", 16 },
  44         { "pca9671", 16 },
  45         { "pca9673", 16 },
  46         { "pca9675", 16 },
  47         { "max7328", 8 },
  48         { "max7329", 8 },
  49         { "tca9554", 8 },
  50         { }
  51 };
  52 MODULE_DEVICE_TABLE(i2c, pcf857x_id);
  53
  54 #ifdef CONFIG_OF
  55 static const struct of_device_id pcf857x_of_table[] = {
  56         { .compatible = "nxp,pcf8574" },
  57         { .compatible = "nxp,pcf8574a" },
  58         { .compatible = "nxp,pca8574" },
  59         { .compatible = "nxp,pca9670" },
  60         { .compatible = "nxp,pca9672" },
  61         { .compatible = "nxp,pca9674" },
  62         { .compatible = "nxp,pcf8575" },
  63         { .compatible = "nxp,pca8575" },
  64         { .compatible = "nxp,pca9671" },
  65         { .compatible = "nxp,pca9673" },
  66         { .compatible = "nxp,pca9675" },
  67         { .compatible = "maxim,max7328" },
  68         { .compatible = "maxim,max7329" },
  69         { .compatible = "ti,tca9554" },
  70         { }
  71 };
  72 MODULE_DEVICE_TABLE(of, pcf857x_of_table);
  73 #endif
  74
  75 /*
  76  * The pcf857x, pca857x, and pca967x chips only expose one read and one
  77  * write register.  Writing a "one" bit (to match the reset state) lets
  78  * that pin be used as an input; it's not an open-drain model, but acts
  79  * a bit like one.  This is described as "quasi-bidirectional"; read the
  80  * chip documentation for details.
  81  *
  82  * Many other I2C GPIO expander chips (like the pca953x models) have
  83  * more complex register models and more conventional circuitry using
  84  * push/pull drivers.  They often use the same 0x20..0x27 addresses as
  85  * pcf857x parts, making the "legacy" I2C driver model problematic.
  86  */
  87 struct pcf857x {
  88         struct gpio_chip        chip;
  89         struct i2c_client       *client;
  90         struct mutex            lock;           /* protect 'out' */
  91         unsigned                out;            /* software latch */
  92         unsigned                status;         /* current status */
  93         unsigned int            irq_parent;
  94         unsigned                irq_enabled;    /* enabled irqs */
  95
  96         int (*write)(struct i2c_client *client, unsigned data);
  97         int (*read)(struct i2c_client *client);
  98 };
  99
 100 /*-------------------------------------------------------------------------*/
 101
 102 /* Talk to 8-bit I/O expander */
 103
 104 static int i2c_write_le8(struct i2c_client *client, unsigned data)
 105 {
 106         return i2c_smbus_write_byte(client, data);
 107 }
 108
 109 static int i2c_read_le8(struct i2c_client *client)
 110 {
 111         return (int)i2c_smbus_read_byte(client);
 112 }
 113
 114 /* Talk to 16-bit I/O expander */
 115
 116 static int i2c_write_le16(struct i2c_client *client, unsigned word)
 117 {
 118         u8 buf[2] = { word & 0xff, word >> 8, };
 119         int status;
 120
 121         status = i2c_master_send(client, buf, 2);
 122         return (status < 0) ? status : 0;
 123 }
 124
 125 static int i2c_read_le16(struct i2c_client *client)
 126 {
 127         u8 buf[2];
 128         int status;
 129
 130         status = i2c_master_recv(client, buf, 2);
 131         if (status < 0)
 132                 return status;
 133         return (buf[1] << 8) | buf[0];
 134 }
 135
 136 /*-------------------------------------------------------------------------*/
 137
 138 static int pcf857x_input(struct gpio_chip *chip, unsigned offset)
 139 {
 140         struct pcf857x  *gpio = gpiochip_get_data(chip);
 141         int             status;
 142
 143         mutex_lock(&gpio->lock);
 144         gpio->out |= (1 << offset);
 145         status = gpio->write(gpio->client, gpio->out);
 146         mutex_unlock(&gpio->lock);
 147
 148         return status;
 149 }
 150
 151 static int pcf857x_get(struct gpio_chip *chip, unsigned offset)
 152 {
 153         struct pcf857x  *gpio = gpiochip_get_data(chip);
 154         int             value;
 155
 156         value = gpio->read(gpio->client);
 157         return (value < 0) ? value : !!(value & (1 << offset));
 158 }
 159
 160 static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value)
 161 {
 162         struct pcf857x  *gpio = gpiochip_get_data(chip);
 163         unsigned        bit = 1 << offset;
 164         int             status;
 165
 166         mutex_lock(&gpio->lock);
 167         if (value)
 168                 gpio->out |= bit;
 169         else
 170                 gpio->out &= ~bit;
 171         status = gpio->write(gpio->client, gpio->out);
 172         mutex_unlock(&gpio->lock);
 173
 174         return status;
 175 }
 176
 177 static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
 178 {
 179         pcf857x_output(chip, offset, value);
 180 }
 181
 182 /*-------------------------------------------------------------------------*/
 183
 184 static irqreturn_t pcf857x_irq(int irq, void *data)
 185 {
 186         struct pcf857x  *gpio = data;
 187         unsigned long change, i, status;
 188
 189         status = gpio->read(gpio->client);
 190
 191         /*
 192          * call the interrupt handler iff gpio is used as
 193          * interrupt source, just to avoid bad irqs
 194          */
 195         mutex_lock(&gpio->lock);
 196         change = (gpio->status ^ status) & gpio->irq_enabled;
 197         gpio->status = status;
 198         mutex_unlock(&gpio->lock);
 199
 200         for_each_set_bit(i, &change, gpio->chip.ngpio)
 201                 handle_nested_irq(irq_find_mapping(gpio->chip.irqdomain, i));
 202
 203         return IRQ_HANDLED;
 204 }
 205
 206 /*
 207  * NOP functions
 208  */
 209 static void noop(struct irq_data *data) { }
 210
 211 static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
 212 {
 213         struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
 214
 215         int error = 0;
 216
 217         if (gpio->irq_parent) {
 218                 error = irq_set_irq_wake(gpio->irq_parent, on);
 219                 if (error) {
 220                         dev_dbg(&gpio->client->dev,
 221                                 "irq %u doesn't support irq_set_wake\n",
 222                                 gpio->irq_parent);
 223                         gpio->irq_parent = 0;
 224                 }
 225         }
 226         return error;
 227 }
 228
 229 static void pcf857x_irq_enable(struct irq_data *data)
 230 {
 231         struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
 232
 233         gpio->irq_enabled |= (1 << data->hwirq);
 234 }
 235
 236 static void pcf857x_irq_disable(struct irq_data *data)
 237 {
 238         struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
 239
 240         gpio->irq_enabled &= ~(1 << data->hwirq);
 241 }
 242
 243 static void pcf857x_irq_bus_lock(struct irq_data *data)
 244 {
 245         struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
 246
 247         mutex_lock(&gpio->lock);
 248 }
 249
 250 static void pcf857x_irq_bus_sync_unlock(struct irq_data *data)
 251 {
 252         struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
 253
 254         mutex_unlock(&gpio->lock);
 255 }
 256
 257 static struct irq_chip pcf857x_irq_chip = {
 258         .name           = "pcf857x",
 259         .irq_enable     = pcf857x_irq_enable,
 260         .irq_disable    = pcf857x_irq_disable,
 261         .irq_ack        = noop,
 262         .irq_mask       = noop,
 263         .irq_unmask     = noop,
 264         .irq_set_wake   = pcf857x_irq_set_wake,
 265         .irq_bus_lock           = pcf857x_irq_bus_lock,
 266         .irq_bus_sync_unlock    = pcf857x_irq_bus_sync_unlock,
 267 };
 268
 269 /*-------------------------------------------------------------------------*/
 270
 271 static int pcf857x_probe(struct i2c_client *client,
 272                          const struct i2c_device_id *id)
 273 {
 274         struct pcf857x_platform_data    *pdata = dev_get_platdata(&client->dev);
 275         struct device_node              *np = client->dev.of_node;
 276         struct pcf857x                  *gpio;
 277         unsigned int                    n_latch = 0;
 278         int                             status;
 279
 280         if (IS_ENABLED(CONFIG_OF) && np)
 281                 of_property_read_u32(np, "lines-initial-states", &n_latch);
 282         else if (pdata)
 283                 n_latch = pdata->n_latch;
 284         else
 285                 dev_dbg(&client->dev, "no platform data\n");
 286
 287         /* Allocate, initialize, and register this gpio_chip. */
 288         gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
 289         if (!gpio)
 290                 return -ENOMEM;
 291
 292         mutex_init(&gpio->lock);
 293
 294         gpio->chip.base                 = pdata ? pdata->gpio_base : -1;
 295         gpio->chip.can_sleep            = true;
 296         gpio->chip.parent               = &client->dev;
 297         gpio->chip.owner                = THIS_MODULE;
 298         gpio->chip.get                  = pcf857x_get;
 299         gpio->chip.set                  = pcf857x_set;
 300         gpio->chip.direction_input      = pcf857x_input;
 301         gpio->chip.direction_output     = pcf857x_output;
 302         gpio->chip.ngpio                = id->driver_data;
 303
 304         /* NOTE:  the OnSemi jlc1562b is also largely compatible with
 305          * these parts, notably for output.  It has a low-resolution
 306          * DAC instead of pin change IRQs; and its inputs can be the
 307          * result of comparators.
 308          */
 309
 310         /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f;
 311          * 9670, 9672, 9764, and 9764a use quite a variety.
 312          *
 313          * NOTE: we don't distinguish here between *4 and *4a parts.
 314          */
 315         if (gpio->chip.ngpio == 8) {
 316                 gpio->write     = i2c_write_le8;
 317                 gpio->read      = i2c_read_le8;
 318
 319                 if (!i2c_check_functionality(client->adapter,
 320                                 I2C_FUNC_SMBUS_BYTE))
 321                         status = -EIO;
 322
 323                 /* fail if there's no chip present */
 324                 else
 325                         status = i2c_smbus_read_byte(client);
 326
 327         /* '75/'75c addresses are 0x20..0x27, just like the '74;
 328          * the '75c doesn't have a current source pulling high.
 329          * 9671, 9673, and 9765 use quite a variety of addresses.
 330          *
 331          * NOTE: we don't distinguish here between '75 and '75c parts.
 332          */
 333         } else if (gpio->chip.ngpio == 16) {
 334                 gpio->write     = i2c_write_le16;
 335                 gpio->read      = i2c_read_le16;
 336
 337                 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 338                         status = -EIO;
 339
 340                 /* fail if there's no chip present */
 341                 else
 342                         status = i2c_read_le16(client);
 343
 344         } else {
 345                 dev_dbg(&client->dev, "unsupported number of gpios\n");
 346                 status = -EINVAL;
 347         }
 348
 349         if (status < 0)
 350                 goto fail;
 351
 352         gpio->chip.label = client->name;
 353
 354         gpio->client = client;
 355         i2c_set_clientdata(client, gpio);
 356
 357         /* NOTE:  these chips have strange "quasi-bidirectional" I/O pins.
 358          * We can't actually know whether a pin is configured (a) as output
 359          * and driving the signal low, or (b) as input and reporting a low
 360          * value ... without knowing the last value written since the chip
 361          * came out of reset (if any).  We can't read the latched output.
 362          *
 363          * In short, the only reliable solution for setting up pin direction
 364          * is to do it explicitly.  The setup() method can do that, but it
 365          * may cause transient glitching since it can't know the last value
 366          * written (some pins may need to be driven low).
 367          *
 368          * Using n_latch avoids that trouble.  When left initialized to zero,
 369          * our software copy of the "latch" then matches the chip's all-ones
 370          * reset state.  Otherwise it flags pins to be driven low.
 371          */
 372         gpio->out = ~n_latch;
 373         gpio->status = gpio->out;
 374
 375         status = devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio);
 376         if (status < 0)
 377                 goto fail;
 378
 379         /* Enable irqchip if we have an interrupt */
 380         if (client->irq) {
 381                 status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip,
 382                                               0, handle_level_irq,
 383                                               IRQ_TYPE_NONE);
 384                 if (status) {
 385                         dev_err(&client->dev, "cannot add irqchip\n");
 386                         goto fail;
 387                 }
 388
 389                 status = devm_request_threaded_irq(&client->dev, client->irq,
 390                                         NULL, pcf857x_irq, IRQF_ONESHOT |
 391                                         IRQF_TRIGGER_FALLING | IRQF_SHARED,
 392                                         dev_name(&client->dev), gpio);
 393                 if (status)
 394                         goto fail;
 395
 396                 gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
 397                                              client->irq, NULL);
 398                 gpio->irq_parent = client->irq;
 399         }
 400
 401         /* Let platform code set up the GPIOs and their users.
 402          * Now is the first time anyone could use them.
 403          */
 404         if (pdata && pdata->setup) {
 405                 status = pdata->setup(client,
 406                                 gpio->chip.base, gpio->chip.ngpio,
 407                                 pdata->context);
 408                 if (status < 0)
 409                         dev_warn(&client->dev, "setup --> %d\n", status);
 410         }
 411
 412         dev_info(&client->dev, "probed\n");
 413
 414         return 0;
 415
 416 fail:
 417         dev_dbg(&client->dev, "probe error %d for '%s'\n", status,
 418                 client->name);
 419
 420         return status;
 421 }
 422
 423 static int pcf857x_remove(struct i2c_client *client)
 424 {
 425         struct pcf857x_platform_data    *pdata = dev_get_platdata(&client->dev);
 426         struct pcf857x                  *gpio = i2c_get_clientdata(client);
 427         int                             status = 0;
 428
 429         if (pdata && pdata->teardown) {
 430                 status = pdata->teardown(client,
 431                                 gpio->chip.base, gpio->chip.ngpio,
 432                                 pdata->context);
 433                 if (status < 0) {
 434                         dev_err(&client->dev, "%s --> %d\n",
 435                                         "teardown", status);
 436                         return status;
 437                 }
 438         }
 439
 440         return status;
 441 }
 442
 443 static void pcf857x_shutdown(struct i2c_client *client)
 444 {
 445         struct pcf857x *gpio = i2c_get_clientdata(client);
 446
 447         /* Drive all the I/O lines high */
 448         gpio->write(gpio->client, BIT(gpio->chip.ngpio) - 1);
 449 }
 450
 451 static struct i2c_driver pcf857x_driver = {
 452         .driver = {
 453                 .name   = "pcf857x",
 454                 .of_match_table = of_match_ptr(pcf857x_of_table),
 455         },
 456         .probe  = pcf857x_probe,
 457         .remove = pcf857x_remove,
 458         .shutdown = pcf857x_shutdown,
 459         .id_table = pcf857x_id,
 460 };
 461
 462 static int __init pcf857x_init(void)
 463 {
 464         return i2c_add_driver(&pcf857x_driver);
 465 }
 466 /* register after i2c postcore initcall and before
 467  * subsys initcalls that may rely on these GPIOs
 468  */
 469 subsys_initcall(pcf857x_init);
 470
 471 static void __exit pcf857x_exit(void)
 472 {
 473         i2c_del_driver(&pcf857x_driver);
 474 }
 475 module_exit(pcf857x_exit);
 476
 477 MODULE_LICENSE("GPL");
 478 MODULE_AUTHOR("David Brownell");