net/mlx5: E-Switch, Set the actions for offloaded rules properly
[linux/fpc-iii.git] / drivers / gpio / gpio-xilinx.c
blob14b2a62338ea75e27e44ca61d062f4ae82df30fc
1 /*
2 * Xilinx gpio driver for xps/axi_gpio IP.
4 * Copyright 2008 - 2013 Xilinx, Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
10 * You should have received a copy of the GNU General Public License
11 * along with this program; if not, write to the Free Software
12 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
15 #include <linux/bitops.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/module.h>
19 #include <linux/of_device.h>
20 #include <linux/of_platform.h>
21 #include <linux/of_gpio.h>
22 #include <linux/io.h>
23 #include <linux/gpio.h>
24 #include <linux/slab.h>
26 /* Register Offset Definitions */
27 #define XGPIO_DATA_OFFSET (0x0) /* Data register */
28 #define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
30 #define XGPIO_CHANNEL_OFFSET 0x8
32 /* Read/Write access to the GPIO registers */
33 #if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
34 # define xgpio_readreg(offset) readl(offset)
35 # define xgpio_writereg(offset, val) writel(val, offset)
36 #else
37 # define xgpio_readreg(offset) __raw_readl(offset)
38 # define xgpio_writereg(offset, val) __raw_writel(val, offset)
39 #endif
41 /**
42 * struct xgpio_instance - Stores information about GPIO device
43 * @mmchip: OF GPIO chip for memory mapped banks
44 * @gpio_width: GPIO width for every channel
45 * @gpio_state: GPIO state shadow register
46 * @gpio_dir: GPIO direction shadow register
47 * @gpio_lock: Lock used for synchronization
49 struct xgpio_instance {
50 struct of_mm_gpio_chip mmchip;
51 unsigned int gpio_width[2];
52 u32 gpio_state[2];
53 u32 gpio_dir[2];
54 spinlock_t gpio_lock[2];
57 static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
59 if (gpio >= chip->gpio_width[0])
60 return 1;
62 return 0;
65 static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio)
67 if (xgpio_index(chip, gpio))
68 return XGPIO_CHANNEL_OFFSET;
70 return 0;
73 static inline int xgpio_offset(struct xgpio_instance *chip, int gpio)
75 if (xgpio_index(chip, gpio))
76 return gpio - chip->gpio_width[0];
78 return gpio;
81 /**
82 * xgpio_get - Read the specified signal of the GPIO device.
83 * @gc: Pointer to gpio_chip device structure.
84 * @gpio: GPIO signal number.
86 * This function reads the specified signal of the GPIO device.
88 * Return:
89 * 0 if direction of GPIO signals is set as input otherwise it
90 * returns negative error value.
92 static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
94 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
95 struct xgpio_instance *chip = gpiochip_get_data(gc);
96 u32 val;
98 val = xgpio_readreg(mm_gc->regs + XGPIO_DATA_OFFSET +
99 xgpio_regoffset(chip, gpio));
101 return !!(val & BIT(xgpio_offset(chip, gpio)));
105 * xgpio_set - Write the specified signal of the GPIO device.
106 * @gc: Pointer to gpio_chip device structure.
107 * @gpio: GPIO signal number.
108 * @val: Value to be written to specified signal.
110 * This function writes the specified value in to the specified signal of the
111 * GPIO device.
113 static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
115 unsigned long flags;
116 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
117 struct xgpio_instance *chip = gpiochip_get_data(gc);
118 int index = xgpio_index(chip, gpio);
119 int offset = xgpio_offset(chip, gpio);
121 spin_lock_irqsave(&chip->gpio_lock[index], flags);
123 /* Write to GPIO signal and set its direction to output */
124 if (val)
125 chip->gpio_state[index] |= BIT(offset);
126 else
127 chip->gpio_state[index] &= ~BIT(offset);
129 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
130 xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
132 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
136 * xgpio_set_multiple - Write the specified signals of the GPIO device.
137 * @gc: Pointer to gpio_chip device structure.
138 * @mask: Mask of the GPIOS to modify.
139 * @bits: Value to be wrote on each GPIO
141 * This function writes the specified values into the specified signals of the
142 * GPIO devices.
144 static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
145 unsigned long *bits)
147 unsigned long flags;
148 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
149 struct xgpio_instance *chip = gpiochip_get_data(gc);
150 int index = xgpio_index(chip, 0);
151 int offset, i;
153 spin_lock_irqsave(&chip->gpio_lock[index], flags);
155 /* Write to GPIO signals */
156 for (i = 0; i < gc->ngpio; i++) {
157 if (*mask == 0)
158 break;
159 if (index != xgpio_index(chip, i)) {
160 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
161 xgpio_regoffset(chip, i),
162 chip->gpio_state[index]);
163 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
164 index = xgpio_index(chip, i);
165 spin_lock_irqsave(&chip->gpio_lock[index], flags);
167 if (__test_and_clear_bit(i, mask)) {
168 offset = xgpio_offset(chip, i);
169 if (test_bit(i, bits))
170 chip->gpio_state[index] |= BIT(offset);
171 else
172 chip->gpio_state[index] &= ~BIT(offset);
176 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
177 xgpio_regoffset(chip, i), chip->gpio_state[index]);
179 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
183 * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
184 * @gc: Pointer to gpio_chip device structure.
185 * @gpio: GPIO signal number.
187 * Return:
188 * 0 - if direction of GPIO signals is set as input
189 * otherwise it returns negative error value.
191 static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
193 unsigned long flags;
194 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
195 struct xgpio_instance *chip = gpiochip_get_data(gc);
196 int index = xgpio_index(chip, gpio);
197 int offset = xgpio_offset(chip, gpio);
199 spin_lock_irqsave(&chip->gpio_lock[index], flags);
201 /* Set the GPIO bit in shadow register and set direction as input */
202 chip->gpio_dir[index] |= BIT(offset);
203 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
204 xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
206 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
208 return 0;
212 * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
213 * @gc: Pointer to gpio_chip device structure.
214 * @gpio: GPIO signal number.
215 * @val: Value to be written to specified signal.
217 * This function sets the direction of specified GPIO signal as output.
219 * Return:
220 * If all GPIO signals of GPIO chip is configured as input then it returns
221 * error otherwise it returns 0.
223 static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
225 unsigned long flags;
226 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
227 struct xgpio_instance *chip = gpiochip_get_data(gc);
228 int index = xgpio_index(chip, gpio);
229 int offset = xgpio_offset(chip, gpio);
231 spin_lock_irqsave(&chip->gpio_lock[index], flags);
233 /* Write state of GPIO signal */
234 if (val)
235 chip->gpio_state[index] |= BIT(offset);
236 else
237 chip->gpio_state[index] &= ~BIT(offset);
238 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
239 xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
241 /* Clear the GPIO bit in shadow register and set direction as output */
242 chip->gpio_dir[index] &= ~BIT(offset);
243 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
244 xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
246 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
248 return 0;
252 * xgpio_save_regs - Set initial values of GPIO pins
253 * @mm_gc: Pointer to memory mapped GPIO chip structure
255 static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
257 struct xgpio_instance *chip =
258 container_of(mm_gc, struct xgpio_instance, mmchip);
260 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]);
261 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]);
263 if (!chip->gpio_width[1])
264 return;
266 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
267 chip->gpio_state[1]);
268 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
269 chip->gpio_dir[1]);
273 * xgpio_remove - Remove method for the GPIO device.
274 * @pdev: pointer to the platform device
276 * This function remove gpiochips and frees all the allocated resources.
278 * Return: 0 always
280 static int xgpio_remove(struct platform_device *pdev)
282 struct xgpio_instance *chip = platform_get_drvdata(pdev);
284 of_mm_gpiochip_remove(&chip->mmchip);
286 return 0;
290 * xgpio_of_probe - Probe method for the GPIO device.
291 * @pdev: pointer to the platform device
293 * Return:
294 * It returns 0, if the driver is bound to the GPIO device, or
295 * a negative value if there is an error.
297 static int xgpio_probe(struct platform_device *pdev)
299 struct xgpio_instance *chip;
300 int status = 0;
301 struct device_node *np = pdev->dev.of_node;
302 u32 is_dual;
304 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
305 if (!chip)
306 return -ENOMEM;
308 platform_set_drvdata(pdev, chip);
310 /* Update GPIO state shadow register with default value */
311 of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]);
313 /* Update GPIO direction shadow register with default value */
314 if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
315 chip->gpio_dir[0] = 0xFFFFFFFF;
318 * Check device node and parent device node for device width
319 * and assume default width of 32
321 if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
322 chip->gpio_width[0] = 32;
324 spin_lock_init(&chip->gpio_lock[0]);
326 if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
327 is_dual = 0;
329 if (is_dual) {
330 /* Update GPIO state shadow register with default value */
331 of_property_read_u32(np, "xlnx,dout-default-2",
332 &chip->gpio_state[1]);
334 /* Update GPIO direction shadow register with default value */
335 if (of_property_read_u32(np, "xlnx,tri-default-2",
336 &chip->gpio_dir[1]))
337 chip->gpio_dir[1] = 0xFFFFFFFF;
340 * Check device node and parent device node for device width
341 * and assume default width of 32
343 if (of_property_read_u32(np, "xlnx,gpio2-width",
344 &chip->gpio_width[1]))
345 chip->gpio_width[1] = 32;
347 spin_lock_init(&chip->gpio_lock[1]);
350 chip->mmchip.gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1];
351 chip->mmchip.gc.parent = &pdev->dev;
352 chip->mmchip.gc.direction_input = xgpio_dir_in;
353 chip->mmchip.gc.direction_output = xgpio_dir_out;
354 chip->mmchip.gc.get = xgpio_get;
355 chip->mmchip.gc.set = xgpio_set;
356 chip->mmchip.gc.set_multiple = xgpio_set_multiple;
358 chip->mmchip.save_regs = xgpio_save_regs;
360 /* Call the OF gpio helper to setup and register the GPIO device */
361 status = of_mm_gpiochip_add_data(np, &chip->mmchip, chip);
362 if (status) {
363 pr_err("%s: error in probe function with status %d\n",
364 np->full_name, status);
365 return status;
368 return 0;
371 static const struct of_device_id xgpio_of_match[] = {
372 { .compatible = "xlnx,xps-gpio-1.00.a", },
373 { /* end of list */ },
376 MODULE_DEVICE_TABLE(of, xgpio_of_match);
378 static struct platform_driver xgpio_plat_driver = {
379 .probe = xgpio_probe,
380 .remove = xgpio_remove,
381 .driver = {
382 .name = "gpio-xilinx",
383 .of_match_table = xgpio_of_match,
387 static int __init xgpio_init(void)
389 return platform_driver_register(&xgpio_plat_driver);
392 subsys_initcall(xgpio_init);
394 static void __exit xgpio_exit(void)
396 platform_driver_unregister(&xgpio_plat_driver);
398 module_exit(xgpio_exit);
400 MODULE_AUTHOR("Xilinx, Inc.");
401 MODULE_DESCRIPTION("Xilinx GPIO driver");
402 MODULE_LICENSE("GPL");