ARM: dts: omap5: Add bus_dma_limit for L3 bus
[linux/fpc-iii.git] / sound / soc / codecs / wm8523.c
blob04d67ee8203b0337eedcde6dc06a5d96081f7cc1
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * wm8523.c -- WM8523 ALSA SoC Audio driver
5 * Copyright 2009 Wolfson Microelectronics plc
7 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 */
10 #include <linux/module.h>
11 #include <linux/moduleparam.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/pm.h>
15 #include <linux/i2c.h>
16 #include <linux/regmap.h>
17 #include <linux/regulator/consumer.h>
18 #include <linux/slab.h>
19 #include <linux/of_device.h>
20 #include <sound/core.h>
21 #include <sound/pcm.h>
22 #include <sound/pcm_params.h>
23 #include <sound/soc.h>
24 #include <sound/initval.h>
25 #include <sound/tlv.h>
27 #include "wm8523.h"
29 #define WM8523_NUM_SUPPLIES 2
30 static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = {
31 "AVDD",
32 "LINEVDD",
35 #define WM8523_NUM_RATES 7
37 /* codec private data */
38 struct wm8523_priv {
39 struct regmap *regmap;
40 struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
41 unsigned int sysclk;
42 unsigned int rate_constraint_list[WM8523_NUM_RATES];
43 struct snd_pcm_hw_constraint_list rate_constraint;
46 static const struct reg_default wm8523_reg_defaults[] = {
47 { 2, 0x0000 }, /* R2 - PSCTRL1 */
48 { 3, 0x1812 }, /* R3 - AIF_CTRL1 */
49 { 4, 0x0000 }, /* R4 - AIF_CTRL2 */
50 { 5, 0x0001 }, /* R5 - DAC_CTRL3 */
51 { 6, 0x0190 }, /* R6 - DAC_GAINL */
52 { 7, 0x0190 }, /* R7 - DAC_GAINR */
53 { 8, 0x0000 }, /* R8 - ZERO_DETECT */
56 static bool wm8523_volatile_register(struct device *dev, unsigned int reg)
58 switch (reg) {
59 case WM8523_DEVICE_ID:
60 case WM8523_REVISION:
61 return true;
62 default:
63 return false;
67 static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0);
69 static const char *wm8523_zd_count_text[] = {
70 "1024",
71 "2048",
74 static SOC_ENUM_SINGLE_DECL(wm8523_zc_count, WM8523_ZERO_DETECT, 0,
75 wm8523_zd_count_text);
77 static const struct snd_kcontrol_new wm8523_controls[] = {
78 SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR,
79 0, 448, 0, dac_tlv),
80 SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0),
81 SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0),
82 SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1),
83 SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0),
84 SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0),
85 SOC_ENUM("Zero Detect Count", wm8523_zc_count),
88 static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = {
89 SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
90 SND_SOC_DAPM_OUTPUT("LINEVOUTL"),
91 SND_SOC_DAPM_OUTPUT("LINEVOUTR"),
94 static const struct snd_soc_dapm_route wm8523_dapm_routes[] = {
95 { "LINEVOUTL", NULL, "DAC" },
96 { "LINEVOUTR", NULL, "DAC" },
99 static const struct {
100 int value;
101 int ratio;
102 } lrclk_ratios[WM8523_NUM_RATES] = {
103 { 1, 128 },
104 { 2, 192 },
105 { 3, 256 },
106 { 4, 384 },
107 { 5, 512 },
108 { 6, 768 },
109 { 7, 1152 },
112 static const struct {
113 int value;
114 int ratio;
115 } bclk_ratios[] = {
116 { 2, 32 },
117 { 3, 64 },
118 { 4, 128 },
121 static int wm8523_startup(struct snd_pcm_substream *substream,
122 struct snd_soc_dai *dai)
124 struct snd_soc_component *component = dai->component;
125 struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component);
127 /* The set of sample rates that can be supported depends on the
128 * MCLK supplied to the CODEC - enforce this.
130 if (!wm8523->sysclk) {
131 dev_err(component->dev,
132 "No MCLK configured, call set_sysclk() on init\n");
133 return -EINVAL;
136 snd_pcm_hw_constraint_list(substream->runtime, 0,
137 SNDRV_PCM_HW_PARAM_RATE,
138 &wm8523->rate_constraint);
140 return 0;
143 static int wm8523_hw_params(struct snd_pcm_substream *substream,
144 struct snd_pcm_hw_params *params,
145 struct snd_soc_dai *dai)
147 struct snd_soc_component *component = dai->component;
148 struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component);
149 int i;
150 u16 aifctrl1 = snd_soc_component_read32(component, WM8523_AIF_CTRL1);
151 u16 aifctrl2 = snd_soc_component_read32(component, WM8523_AIF_CTRL2);
153 /* Find a supported LRCLK ratio */
154 for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
155 if (wm8523->sysclk / params_rate(params) ==
156 lrclk_ratios[i].ratio)
157 break;
160 /* Should never happen, should be handled by constraints */
161 if (i == ARRAY_SIZE(lrclk_ratios)) {
162 dev_err(component->dev, "MCLK/fs ratio %d unsupported\n",
163 wm8523->sysclk / params_rate(params));
164 return -EINVAL;
167 aifctrl2 &= ~WM8523_SR_MASK;
168 aifctrl2 |= lrclk_ratios[i].value;
170 if (aifctrl1 & WM8523_AIF_MSTR) {
171 /* Find a fs->bclk ratio */
172 for (i = 0; i < ARRAY_SIZE(bclk_ratios); i++)
173 if (params_width(params) * 2 <= bclk_ratios[i].ratio)
174 break;
176 if (i == ARRAY_SIZE(bclk_ratios)) {
177 dev_err(component->dev,
178 "No matching BCLK/fs ratio for word length %d\n",
179 params_width(params));
180 return -EINVAL;
183 aifctrl2 &= ~WM8523_BCLKDIV_MASK;
184 aifctrl2 |= bclk_ratios[i].value << WM8523_BCLKDIV_SHIFT;
187 aifctrl1 &= ~WM8523_WL_MASK;
188 switch (params_width(params)) {
189 case 16:
190 break;
191 case 20:
192 aifctrl1 |= 0x8;
193 break;
194 case 24:
195 aifctrl1 |= 0x10;
196 break;
197 case 32:
198 aifctrl1 |= 0x18;
199 break;
202 snd_soc_component_write(component, WM8523_AIF_CTRL1, aifctrl1);
203 snd_soc_component_write(component, WM8523_AIF_CTRL2, aifctrl2);
205 return 0;
208 static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai,
209 int clk_id, unsigned int freq, int dir)
211 struct snd_soc_component *component = codec_dai->component;
212 struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component);
213 unsigned int val;
214 int i;
216 wm8523->sysclk = freq;
218 wm8523->rate_constraint.count = 0;
219 for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
220 val = freq / lrclk_ratios[i].ratio;
221 /* Check that it's a standard rate since core can't
222 * cope with others and having the odd rates confuses
223 * constraint matching.
225 switch (val) {
226 case 8000:
227 case 11025:
228 case 16000:
229 case 22050:
230 case 32000:
231 case 44100:
232 case 48000:
233 case 64000:
234 case 88200:
235 case 96000:
236 case 176400:
237 case 192000:
238 dev_dbg(component->dev, "Supported sample rate: %dHz\n",
239 val);
240 wm8523->rate_constraint_list[i] = val;
241 wm8523->rate_constraint.count++;
242 break;
243 default:
244 dev_dbg(component->dev, "Skipping sample rate: %dHz\n",
245 val);
249 /* Need at least one supported rate... */
250 if (wm8523->rate_constraint.count == 0)
251 return -EINVAL;
253 return 0;
257 static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai,
258 unsigned int fmt)
260 struct snd_soc_component *component = codec_dai->component;
261 u16 aifctrl1 = snd_soc_component_read32(component, WM8523_AIF_CTRL1);
263 aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK |
264 WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK);
266 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
267 case SND_SOC_DAIFMT_CBM_CFM:
268 aifctrl1 |= WM8523_AIF_MSTR;
269 break;
270 case SND_SOC_DAIFMT_CBS_CFS:
271 break;
272 default:
273 return -EINVAL;
276 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
277 case SND_SOC_DAIFMT_I2S:
278 aifctrl1 |= 0x0002;
279 break;
280 case SND_SOC_DAIFMT_RIGHT_J:
281 break;
282 case SND_SOC_DAIFMT_LEFT_J:
283 aifctrl1 |= 0x0001;
284 break;
285 case SND_SOC_DAIFMT_DSP_A:
286 aifctrl1 |= 0x0003;
287 break;
288 case SND_SOC_DAIFMT_DSP_B:
289 aifctrl1 |= 0x0023;
290 break;
291 default:
292 return -EINVAL;
295 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
296 case SND_SOC_DAIFMT_NB_NF:
297 break;
298 case SND_SOC_DAIFMT_IB_IF:
299 aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV;
300 break;
301 case SND_SOC_DAIFMT_IB_NF:
302 aifctrl1 |= WM8523_BCLK_INV;
303 break;
304 case SND_SOC_DAIFMT_NB_IF:
305 aifctrl1 |= WM8523_LRCLK_INV;
306 break;
307 default:
308 return -EINVAL;
311 snd_soc_component_write(component, WM8523_AIF_CTRL1, aifctrl1);
313 return 0;
316 static int wm8523_set_bias_level(struct snd_soc_component *component,
317 enum snd_soc_bias_level level)
319 struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component);
320 int ret;
322 switch (level) {
323 case SND_SOC_BIAS_ON:
324 break;
326 case SND_SOC_BIAS_PREPARE:
327 /* Full power on */
328 snd_soc_component_update_bits(component, WM8523_PSCTRL1,
329 WM8523_SYS_ENA_MASK, 3);
330 break;
332 case SND_SOC_BIAS_STANDBY:
333 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
334 ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
335 wm8523->supplies);
336 if (ret != 0) {
337 dev_err(component->dev,
338 "Failed to enable supplies: %d\n",
339 ret);
340 return ret;
343 /* Sync back default/cached values */
344 regcache_sync(wm8523->regmap);
346 /* Initial power up */
347 snd_soc_component_update_bits(component, WM8523_PSCTRL1,
348 WM8523_SYS_ENA_MASK, 1);
350 msleep(100);
353 /* Power up to mute */
354 snd_soc_component_update_bits(component, WM8523_PSCTRL1,
355 WM8523_SYS_ENA_MASK, 2);
357 break;
359 case SND_SOC_BIAS_OFF:
360 /* The chip runs through the power down sequence for us. */
361 snd_soc_component_update_bits(component, WM8523_PSCTRL1,
362 WM8523_SYS_ENA_MASK, 0);
363 msleep(100);
365 regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies),
366 wm8523->supplies);
367 break;
369 return 0;
372 #define WM8523_RATES SNDRV_PCM_RATE_8000_192000
374 #define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
375 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
377 static const struct snd_soc_dai_ops wm8523_dai_ops = {
378 .startup = wm8523_startup,
379 .hw_params = wm8523_hw_params,
380 .set_sysclk = wm8523_set_dai_sysclk,
381 .set_fmt = wm8523_set_dai_fmt,
384 static struct snd_soc_dai_driver wm8523_dai = {
385 .name = "wm8523-hifi",
386 .playback = {
387 .stream_name = "Playback",
388 .channels_min = 2, /* Mono modes not yet supported */
389 .channels_max = 2,
390 .rates = WM8523_RATES,
391 .formats = WM8523_FORMATS,
393 .ops = &wm8523_dai_ops,
396 static int wm8523_probe(struct snd_soc_component *component)
398 struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component);
400 wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0];
401 wm8523->rate_constraint.count =
402 ARRAY_SIZE(wm8523->rate_constraint_list);
404 /* Change some default settings - latch VU and enable ZC */
405 snd_soc_component_update_bits(component, WM8523_DAC_GAINR,
406 WM8523_DACR_VU, WM8523_DACR_VU);
407 snd_soc_component_update_bits(component, WM8523_DAC_CTRL3, WM8523_ZC, WM8523_ZC);
409 return 0;
412 static const struct snd_soc_component_driver soc_component_dev_wm8523 = {
413 .probe = wm8523_probe,
414 .set_bias_level = wm8523_set_bias_level,
415 .controls = wm8523_controls,
416 .num_controls = ARRAY_SIZE(wm8523_controls),
417 .dapm_widgets = wm8523_dapm_widgets,
418 .num_dapm_widgets = ARRAY_SIZE(wm8523_dapm_widgets),
419 .dapm_routes = wm8523_dapm_routes,
420 .num_dapm_routes = ARRAY_SIZE(wm8523_dapm_routes),
421 .suspend_bias_off = 1,
422 .idle_bias_on = 1,
423 .use_pmdown_time = 1,
424 .endianness = 1,
425 .non_legacy_dai_naming = 1,
428 static const struct of_device_id wm8523_of_match[] = {
429 { .compatible = "wlf,wm8523" },
430 { },
432 MODULE_DEVICE_TABLE(of, wm8523_of_match);
434 static const struct regmap_config wm8523_regmap = {
435 .reg_bits = 8,
436 .val_bits = 16,
437 .max_register = WM8523_ZERO_DETECT,
439 .reg_defaults = wm8523_reg_defaults,
440 .num_reg_defaults = ARRAY_SIZE(wm8523_reg_defaults),
441 .cache_type = REGCACHE_RBTREE,
443 .volatile_reg = wm8523_volatile_register,
446 static int wm8523_i2c_probe(struct i2c_client *i2c,
447 const struct i2c_device_id *id)
449 struct wm8523_priv *wm8523;
450 unsigned int val;
451 int ret, i;
453 wm8523 = devm_kzalloc(&i2c->dev, sizeof(struct wm8523_priv),
454 GFP_KERNEL);
455 if (wm8523 == NULL)
456 return -ENOMEM;
458 wm8523->regmap = devm_regmap_init_i2c(i2c, &wm8523_regmap);
459 if (IS_ERR(wm8523->regmap)) {
460 ret = PTR_ERR(wm8523->regmap);
461 dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
462 return ret;
465 for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++)
466 wm8523->supplies[i].supply = wm8523_supply_names[i];
468 ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8523->supplies),
469 wm8523->supplies);
470 if (ret != 0) {
471 dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
472 return ret;
475 ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
476 wm8523->supplies);
477 if (ret != 0) {
478 dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
479 return ret;
482 ret = regmap_read(wm8523->regmap, WM8523_DEVICE_ID, &val);
483 if (ret < 0) {
484 dev_err(&i2c->dev, "Failed to read ID register\n");
485 goto err_enable;
487 if (val != 0x8523) {
488 dev_err(&i2c->dev, "Device is not a WM8523, ID is %x\n", ret);
489 ret = -EINVAL;
490 goto err_enable;
493 ret = regmap_read(wm8523->regmap, WM8523_REVISION, &val);
494 if (ret < 0) {
495 dev_err(&i2c->dev, "Failed to read revision register\n");
496 goto err_enable;
498 dev_info(&i2c->dev, "revision %c\n",
499 (val & WM8523_CHIP_REV_MASK) + 'A');
501 ret = regmap_write(wm8523->regmap, WM8523_DEVICE_ID, 0x8523);
502 if (ret != 0) {
503 dev_err(&i2c->dev, "Failed to reset device: %d\n", ret);
504 goto err_enable;
507 regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
509 i2c_set_clientdata(i2c, wm8523);
511 ret = devm_snd_soc_register_component(&i2c->dev,
512 &soc_component_dev_wm8523, &wm8523_dai, 1);
514 return ret;
516 err_enable:
517 regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
518 return ret;
521 static const struct i2c_device_id wm8523_i2c_id[] = {
522 { "wm8523", 0 },
525 MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id);
527 static struct i2c_driver wm8523_i2c_driver = {
528 .driver = {
529 .name = "wm8523",
530 .of_match_table = wm8523_of_match,
532 .probe = wm8523_i2c_probe,
533 .id_table = wm8523_i2c_id,
536 module_i2c_driver(wm8523_i2c_driver);
538 MODULE_DESCRIPTION("ASoC WM8523 driver");
539 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
540 MODULE_LICENSE("GPL");