2 * soc-jack.c -- ALSA SoC jack handling
4 * Copyright 2008 Wolfson Microelectronics PLC.
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
14 #include <sound/jack.h>
15 #include <sound/soc.h>
16 #include <linux/gpio.h>
17 #include <linux/interrupt.h>
18 #include <linux/workqueue.h>
19 #include <linux/delay.h>
20 #include <trace/events/asoc.h>
23 * snd_soc_jack_new - Create a new jack
25 * @id: an identifying string for this jack
26 * @type: a bitmask of enum snd_jack_type values that can be detected by
28 * @jack: structure to use for the jack
30 * Creates a new jack object.
32 * Returns zero if successful, or a negative error code on failure.
33 * On success jack will be initialised.
35 int snd_soc_jack_new(struct snd_soc_codec
*codec
, const char *id
, int type
,
36 struct snd_soc_jack
*jack
)
39 INIT_LIST_HEAD(&jack
->pins
);
40 INIT_LIST_HEAD(&jack
->jack_zones
);
41 BLOCKING_INIT_NOTIFIER_HEAD(&jack
->notifier
);
43 return snd_jack_new(codec
->card
->snd_card
, id
, type
, &jack
->jack
);
45 EXPORT_SYMBOL_GPL(snd_soc_jack_new
);
48 * snd_soc_jack_report - Report the current status for a jack
51 * @status: a bitmask of enum snd_jack_type values that are currently detected.
52 * @mask: a bitmask of enum snd_jack_type values that being reported.
54 * If configured using snd_soc_jack_add_pins() then the associated
55 * DAPM pins will be enabled or disabled as appropriate and DAPM
58 * Note: This function uses mutexes and should be called from a
59 * context which can sleep (such as a workqueue).
61 void snd_soc_jack_report(struct snd_soc_jack
*jack
, int status
, int mask
)
63 struct snd_soc_codec
*codec
;
64 struct snd_soc_dapm_context
*dapm
;
65 struct snd_soc_jack_pin
*pin
;
69 trace_snd_soc_jack_report(jack
, mask
, status
);
77 mutex_lock(&codec
->mutex
);
79 oldstatus
= jack
->status
;
81 jack
->status
&= ~mask
;
82 jack
->status
|= status
& mask
;
84 /* The DAPM sync is expensive enough to be worth skipping.
85 * However, empty mask means pin synchronization is desired. */
86 if (mask
&& (jack
->status
== oldstatus
))
89 trace_snd_soc_jack_notify(jack
, status
);
91 list_for_each_entry(pin
, &jack
->pins
, list
) {
92 enable
= pin
->mask
& jack
->status
;
98 snd_soc_dapm_enable_pin(dapm
, pin
->pin
);
100 snd_soc_dapm_disable_pin(dapm
, pin
->pin
);
103 /* Report before the DAPM sync to help users updating micbias status */
104 blocking_notifier_call_chain(&jack
->notifier
, status
, jack
);
106 snd_soc_dapm_sync(dapm
);
108 snd_jack_report(jack
->jack
, jack
->status
);
111 mutex_unlock(&codec
->mutex
);
113 EXPORT_SYMBOL_GPL(snd_soc_jack_report
);
116 * snd_soc_jack_add_zones - Associate voltage zones with jack
119 * @count: Number of zones
120 * @zone: Array of zones
122 * After this function has been called the zones specified in the
123 * array will be associated with the jack.
125 int snd_soc_jack_add_zones(struct snd_soc_jack
*jack
, int count
,
126 struct snd_soc_jack_zone
*zones
)
130 for (i
= 0; i
< count
; i
++) {
131 INIT_LIST_HEAD(&zones
[i
].list
);
132 list_add(&(zones
[i
].list
), &jack
->jack_zones
);
136 EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones
);
139 * snd_soc_jack_get_type - Based on the mic bias value, this function returns
140 * the type of jack from the zones delcared in the jack type
142 * @micbias_voltage: mic bias voltage at adc channel when jack is plugged in
144 * Based on the mic bias value passed, this function helps identify
145 * the type of jack from the already delcared jack zones
147 int snd_soc_jack_get_type(struct snd_soc_jack
*jack
, int micbias_voltage
)
149 struct snd_soc_jack_zone
*zone
;
151 list_for_each_entry(zone
, &jack
->jack_zones
, list
) {
152 if (micbias_voltage
>= zone
->min_mv
&&
153 micbias_voltage
< zone
->max_mv
)
154 return zone
->jack_type
;
158 EXPORT_SYMBOL_GPL(snd_soc_jack_get_type
);
161 * snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack
164 * @count: Number of pins
165 * @pins: Array of pins
167 * After this function has been called the DAPM pins specified in the
168 * pins array will have their status updated to reflect the current
169 * state of the jack whenever the jack status is updated.
171 int snd_soc_jack_add_pins(struct snd_soc_jack
*jack
, int count
,
172 struct snd_soc_jack_pin
*pins
)
176 for (i
= 0; i
< count
; i
++) {
178 printk(KERN_ERR
"No name for pin %d\n", i
);
182 printk(KERN_ERR
"No mask for pin %d (%s)\n", i
,
187 INIT_LIST_HEAD(&pins
[i
].list
);
188 list_add(&(pins
[i
].list
), &jack
->pins
);
191 snd_soc_dapm_new_widgets(&jack
->codec
->card
->dapm
);
193 /* Update to reflect the last reported status; canned jack
194 * implementations are likely to set their state before the
195 * card has an opportunity to associate pins.
197 snd_soc_jack_report(jack
, 0, 0);
201 EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins
);
204 * snd_soc_jack_notifier_register - Register a notifier for jack status
207 * @nb: Notifier block to register
209 * Register for notification of the current status of the jack. Note
210 * that it is not possible to report additional jack events in the
211 * callback from the notifier, this is intended to support
212 * applications such as enabling electrical detection only when a
213 * mechanical detection event has occurred.
215 void snd_soc_jack_notifier_register(struct snd_soc_jack
*jack
,
216 struct notifier_block
*nb
)
218 blocking_notifier_chain_register(&jack
->notifier
, nb
);
220 EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_register
);
223 * snd_soc_jack_notifier_unregister - Unregister a notifier for jack status
226 * @nb: Notifier block to unregister
228 * Stop notifying for status changes.
230 void snd_soc_jack_notifier_unregister(struct snd_soc_jack
*jack
,
231 struct notifier_block
*nb
)
233 blocking_notifier_chain_unregister(&jack
->notifier
, nb
);
235 EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_unregister
);
237 #ifdef CONFIG_GPIOLIB
239 static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio
*gpio
)
241 struct snd_soc_jack
*jack
= gpio
->jack
;
245 enable
= gpio_get_value_cansleep(gpio
->gpio
);
250 report
= gpio
->report
;
254 if (gpio
->jack_status_check
)
255 report
= gpio
->jack_status_check();
257 snd_soc_jack_report(jack
, report
, gpio
->report
);
260 /* irq handler for gpio pin */
261 static irqreturn_t
gpio_handler(int irq
, void *data
)
263 struct snd_soc_jack_gpio
*gpio
= data
;
264 struct device
*dev
= gpio
->jack
->codec
->card
->dev
;
266 trace_snd_soc_jack_irq(gpio
->name
);
268 if (device_may_wakeup(dev
))
269 pm_wakeup_event(dev
, gpio
->debounce_time
+ 50);
271 schedule_delayed_work(&gpio
->work
,
272 msecs_to_jiffies(gpio
->debounce_time
));
278 static void gpio_work(struct work_struct
*work
)
280 struct snd_soc_jack_gpio
*gpio
;
282 gpio
= container_of(work
, struct snd_soc_jack_gpio
, work
.work
);
283 snd_soc_jack_gpio_detect(gpio
);
287 * snd_soc_jack_add_gpios - Associate GPIO pins with an ASoC jack
290 * @count: number of pins
291 * @gpios: array of gpio pins
293 * This function will request gpio, set data direction and request irq
294 * for each gpio in the array.
296 int snd_soc_jack_add_gpios(struct snd_soc_jack
*jack
, int count
,
297 struct snd_soc_jack_gpio
*gpios
)
301 for (i
= 0; i
< count
; i
++) {
302 if (!gpio_is_valid(gpios
[i
].gpio
)) {
303 printk(KERN_ERR
"Invalid gpio %d\n",
308 if (!gpios
[i
].name
) {
309 printk(KERN_ERR
"No name for gpio %d\n",
315 ret
= gpio_request(gpios
[i
].gpio
, gpios
[i
].name
);
319 ret
= gpio_direction_input(gpios
[i
].gpio
);
323 INIT_DELAYED_WORK(&gpios
[i
].work
, gpio_work
);
324 gpios
[i
].jack
= jack
;
326 ret
= request_any_context_irq(gpio_to_irq(gpios
[i
].gpio
),
328 IRQF_TRIGGER_RISING
|
329 IRQF_TRIGGER_FALLING
,
336 ret
= irq_set_irq_wake(gpio_to_irq(gpios
[i
].gpio
), 1);
339 "Failed to mark GPIO %d as wake source: %d\n",
343 #ifdef CONFIG_GPIO_SYSFS
344 /* Expose GPIO value over sysfs for diagnostic purposes */
345 gpio_export(gpios
[i
].gpio
, false);
348 /* Update initial jack status */
349 snd_soc_jack_gpio_detect(&gpios
[i
]);
355 gpio_free(gpios
[i
].gpio
);
357 snd_soc_jack_free_gpios(jack
, i
, gpios
);
361 EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios
);
364 * snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack
367 * @count: number of pins
368 * @gpios: array of gpio pins
370 * Release gpio and irq resources for gpio pins associated with an ASoC jack.
372 void snd_soc_jack_free_gpios(struct snd_soc_jack
*jack
, int count
,
373 struct snd_soc_jack_gpio
*gpios
)
377 for (i
= 0; i
< count
; i
++) {
378 #ifdef CONFIG_GPIO_SYSFS
379 gpio_unexport(gpios
[i
].gpio
);
381 free_irq(gpio_to_irq(gpios
[i
].gpio
), &gpios
[i
]);
382 cancel_delayed_work_sync(&gpios
[i
].work
);
383 gpio_free(gpios
[i
].gpio
);
384 gpios
[i
].jack
= NULL
;
387 EXPORT_SYMBOL_GPL(snd_soc_jack_free_gpios
);
388 #endif /* CONFIG_GPIOLIB */