ALSA: seq: Fix copy_from_user() call inside lock

[linux/fpc-iii.git] / drivers / thermal / ti-soc-thermal / ti-bandgap.c

/*
 * TI Bandgap temperature sensor driver
 *
 * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
 * Author: J Keerthy <j-keerthy@ti.com>
 * Author: Moiz Sonasath <m-sonasath@ti.com>
 * Couple of fixes, DT and MFD adaptation:
 *   Eduardo Valentin <eduardo.valentin@ti.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/module.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/reboot.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/io.h>

#include "ti-bandgap.h"

/***   Helper functions to access registers and their bitfields   ***/

/**
 * ti_bandgap_readl() - simple read helper function
 * @bgp: pointer to ti_bandgap structure
 * @reg: desired register (offset) to be read
 *
 * Helper function to read bandgap registers. It uses the io remapped area.
 * Return: the register value.
 */
static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
{
        return readl(bgp->base + reg);
}

/**
 * ti_bandgap_writel() - simple write helper function
 * @bgp: pointer to ti_bandgap structure
 * @val: desired register value to be written
 * @reg: desired register (offset) to be written
 *
 * Helper function to write bandgap registers. It uses the io remapped area.
 */
static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg)
{
        writel(val, bgp->base + reg);
}

/**
 * DOC: macro to update bits.
 *
 * RMW_BITS() - used to read, modify and update bandgap bitfields.
 *            The value passed will be shifted.
 */
#define RMW_BITS(bgp, id, reg, mask, val)                       \
do {                                                            \
        struct temp_sensor_registers *t;                        \
        u32 r;                                                  \
                                                                \
        t = bgp->conf->sensors[(id)].registers;         \
        r = ti_bandgap_readl(bgp, t->reg);                      \
        r &= ~t->mask;                                          \
        r |= (val) << __ffs(t->mask);                           \
        ti_bandgap_writel(bgp, r, t->reg);                      \
} while (0)

/***   Basic helper functions   ***/

/**
 * ti_bandgap_power() - controls the power state of a bandgap device
 * @bgp: pointer to ti_bandgap structure
 * @on: desired power state (1 - on, 0 - off)
 *
 * Used to power on/off a bandgap device instance. Only used on those
 * that features tempsoff bit.
 *
 * Return: 0 on success, -ENOTSUPP if tempsoff is not supported.
 */
static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
        int i, ret = 0;

        if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH)) {
                ret = -ENOTSUPP;
                goto exit;
        }

        for (i = 0; i < bgp->conf->sensor_count; i++)
                /* active on 0 */
                RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);

exit:
        return ret;
}

/**
 * ti_bandgap_read_temp() - helper function to read sensor temperature
 * @bgp: pointer to ti_bandgap structure
 * @id: bandgap sensor id
 *
 * Function to concentrate the steps to read sensor temperature register.
 * This function is desired because, depending on bandgap device version,
 * it might be needed to freeze the bandgap state machine, before fetching
 * the register value.
 *
 * Return: temperature in ADC values.
 */
static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
{
        struct temp_sensor_registers *tsr;
        u32 temp, reg;

        tsr = bgp->conf->sensors[id].registers;
        reg = tsr->temp_sensor_ctrl;

        if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
                RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
                /*
                 * In case we cannot read from cur_dtemp / dtemp_0,
                 * then we read from the last valid temp read
                 */
                reg = tsr->ctrl_dtemp_1;
        }

        /* read temperature */
        temp = ti_bandgap_readl(bgp, reg);
        temp &= tsr->bgap_dtemp_mask;

        if (TI_BANDGAP_HAS(bgp, FREEZE_BIT))
                RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);

        return temp;
}

/***   IRQ handlers   ***/

/**
 * ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs
 * @irq: IRQ number
 * @data: private data (struct ti_bandgap *)
 *
 * This is the Talert handler. Use it only if bandgap device features
 * HAS(TALERT). This handler goes over all sensors and checks their
 * conditions and acts accordingly. In case there are events pending,
 * it will reset the event mask to wait for the opposite event (next event).
 * Every time there is a new event, it will be reported to thermal layer.
 *
 * Return: IRQ_HANDLED
 */
static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
{
        struct ti_bandgap *bgp = data;
        struct temp_sensor_registers *tsr;
        u32 t_hot = 0, t_cold = 0, ctrl;
        int i;

        spin_lock(&bgp->lock);
        for (i = 0; i < bgp->conf->sensor_count; i++) {
                tsr = bgp->conf->sensors[i].registers;
                ctrl = ti_bandgap_readl(bgp, tsr->bgap_status);

                /* Read the status of t_hot */
                t_hot = ctrl & tsr->status_hot_mask;

                /* Read the status of t_cold */
                t_cold = ctrl & tsr->status_cold_mask;

                if (!t_cold && !t_hot)
                        continue;

                ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
                /*
                 * One TALERT interrupt: Two sources
                 * If the interrupt is due to t_hot then mask t_hot and
                 * and unmask t_cold else mask t_cold and unmask t_hot
                 */
                if (t_hot) {
                        ctrl &= ~tsr->mask_hot_mask;
                        ctrl |= tsr->mask_cold_mask;
                } else if (t_cold) {
                        ctrl &= ~tsr->mask_cold_mask;
                        ctrl |= tsr->mask_hot_mask;
                }

                ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);

                dev_dbg(bgp->dev,
                        "%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
                        __func__, bgp->conf->sensors[i].domain,
                        t_hot, t_cold);

                /* report temperature to whom may concern */
                if (bgp->conf->report_temperature)
                        bgp->conf->report_temperature(bgp, i);
        }
        spin_unlock(&bgp->lock);

        return IRQ_HANDLED;
}

/**
 * ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
 * @irq: IRQ number
 * @data: private data (unused)
 *
 * This is the Tshut handler. Use it only if bandgap device features
 * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
 * the system.
 *
 * Return: IRQ_HANDLED
 */
static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
{
        pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n",
                 __func__);

        orderly_poweroff(true);

        return IRQ_HANDLED;
}

/***   Helper functions which manipulate conversion ADC <-> mi Celsius   ***/

/**
 * ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
 * @bgp: struct ti_bandgap pointer
 * @adc_val: value in ADC representation
 * @t: address where to write the resulting temperature in mCelsius
 *
 * Simple conversion from ADC representation to mCelsius. In case the ADC value
 * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
 * The conversion table is indexed by the ADC values.
 *
 * Return: 0 if conversion was successful, else -ERANGE in case the @adc_val
 * argument is out of the ADC conv table range.
 */
static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
        const struct ti_bandgap_data *conf = bgp->conf;
        int ret = 0;

        /* look up for temperature in the table and return the temperature */
        if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) {
                ret = -ERANGE;
                goto exit;
        }

        *t = bgp->conf->conv_table[adc_val - conf->adc_start_val];

exit:
        return ret;
}

/**
 * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
 * @bgp: struct ti_bandgap pointer
 * @temp: value in mCelsius
 * @adc: address where to write the resulting temperature in ADC representation
 *
 * Simple conversion from mCelsius to ADC values. In case the temp value
 * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
 * The conversion table is indexed by the ADC values.
 *
 * Return: 0 if conversion was successful, else -ERANGE in case the @temp
 * argument is out of the ADC conv table range.
 */
static
int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
        const struct ti_bandgap_data *conf = bgp->conf;
        const int *conv_table = bgp->conf->conv_table;
        int high, low, mid, ret = 0;

        low = 0;
        high = conf->adc_end_val - conf->adc_start_val;
        mid = (high + low) / 2;

        if (temp < conv_table[low] || temp > conv_table[high]) {
                ret = -ERANGE;
                goto exit;
        }

        while (low < high) {
                if (temp < conv_table[mid])
                        high = mid - 1;
                else
                        low = mid + 1;
                mid = (low + high) / 2;
        }

        *adc = conf->adc_start_val + low;

exit:
        return ret;
}

/**
 * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
 * @bgp: struct ti_bandgap pointer
 * @adc_val: temperature value in ADC representation
 * @hyst_val: hysteresis value in mCelsius
 * @sum: address where to write the resulting temperature (in ADC scale)
 *
 * Adds an hysteresis value (in mCelsius) to a ADC temperature value.
 *
 * Return: 0 on success, -ERANGE otherwise.
 */
static
int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
                        u32 *sum)
{
        int temp, ret;

        /*
         * Need to add in the mcelsius domain, so we have a temperature
         * the conv_table range
         */
        ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
        if (ret < 0)
                goto exit;

        temp += hyst_val;

        ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);

exit:
        return ret;
}

/***   Helper functions handling device Alert/Shutdown signals   ***/

/**
 * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
 * @bgp: struct ti_bandgap pointer
 * @id: bandgap sensor id
 * @t_hot: hot temperature value to trigger alert signal
 * @t_cold: cold temperature value to trigger alert signal
 *
 * Checks the requested t_hot and t_cold values and configures the IRQ event
 * masks accordingly. Call this function only if bandgap features HAS(TALERT).
 */
static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
                                         u32 t_hot, u32 t_cold)
{
        struct temp_sensor_registers *tsr;
        u32 temp, reg_val;

        /* Read the current on die temperature */
        temp = ti_bandgap_read_temp(bgp, id);

        tsr = bgp->conf->sensors[id].registers;
        reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);

        if (temp < t_hot)
                reg_val |= tsr->mask_hot_mask;
        else
                reg_val &= ~tsr->mask_hot_mask;

        if (t_cold < temp)
                reg_val |= tsr->mask_cold_mask;
        else
                reg_val &= ~tsr->mask_cold_mask;
        ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
}

/**
 * ti_bandgap_update_alert_threshold() - sequence to update thresholds
 * @bgp: struct ti_bandgap pointer
 * @id: bandgap sensor id
 * @val: value (ADC) of a new threshold
 * @hot: desired threshold to be updated. true if threshold hot, false if
 *       threshold cold
 *
 * It will program the required thresholds (hot and cold) for TALERT signal.
 * This function can be used to update t_hot or t_cold, depending on @hot value.
 * It checks the resulting t_hot and t_cold values, based on the new passed @val
 * and configures the thresholds so that t_hot is always greater than t_cold.
 * Call this function only if bandgap features HAS(TALERT).
 *
 * Return: 0 if no error, else corresponding error
 */
static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
                                             int val, bool hot)
{
        struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
        struct temp_sensor_registers *tsr;
        u32 thresh_val, reg_val, t_hot, t_cold;
        int err = 0;

        tsr = bgp->conf->sensors[id].registers;

        /* obtain the current value */
        thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold);
        t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
                __ffs(tsr->threshold_tcold_mask);
        t_hot = (thresh_val & tsr->threshold_thot_mask) >>
                __ffs(tsr->threshold_thot_mask);
        if (hot)
                t_hot = val;
        else
                t_cold = val;

        if (t_cold > t_hot) {
                if (hot)
                        err = ti_bandgap_add_hyst(bgp, t_hot,
                                                  -ts_data->hyst_val,
                                                  &t_cold);
                else
                        err = ti_bandgap_add_hyst(bgp, t_cold,
                                                  ts_data->hyst_val,
                                                  &t_hot);
        }

        /* write the new threshold values */
        reg_val = thresh_val &
                  ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask);
        reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) |
                   (t_cold << __ffs(tsr->threshold_tcold_mask));
        ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);

        if (err) {
                dev_err(bgp->dev, "failed to reprogram thot threshold\n");
                err = -EIO;
                goto exit;
        }

        ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
exit:
        return err;
}

/**
 * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
 * @bgp: struct ti_bandgap pointer
 * @id: bandgap sensor id
 *
 * Checks if the bandgap pointer is valid and if the sensor id is also
 * applicable.
 *
 * Return: 0 if no errors, -EINVAL for invalid @bgp pointer or -ERANGE if
 * @id cannot index @bgp sensors.
 */
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
        int ret = 0;

        if (!bgp || IS_ERR(bgp)) {
                pr_err("%s: invalid bandgap pointer\n", __func__);
                ret = -EINVAL;
                goto exit;
        }

        if ((id < 0) || (id >= bgp->conf->sensor_count)) {
                dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
                        __func__, id);
                ret = -ERANGE;
        }

exit:
        return ret;
}

/**
 * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
 * @bgp: struct ti_bandgap pointer
 * @id: bandgap sensor id
 * @val: value (mCelsius) of a new threshold
 * @hot: desired threshold to be updated. true if threshold hot, false if
 *       threshold cold
 *
 * It will update the required thresholds (hot and cold) for TALERT signal.
 * This function can be used to update t_hot or t_cold, depending on @hot value.
 * Validates the mCelsius range and update the requested threshold.
 * Call this function only if bandgap features HAS(TALERT).
 *
 * Return: 0 if no error, else corresponding error value.
 */
static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
                                       bool hot)
{
        struct temp_sensor_data *ts_data;
        struct temp_sensor_registers *tsr;
        u32 adc_val;
        int ret;

        ret = ti_bandgap_validate(bgp, id);
        if (ret)
                goto exit;

        if (!TI_BANDGAP_HAS(bgp, TALERT)) {
                ret = -ENOTSUPP;
                goto exit;
        }

        ts_data = bgp->conf->sensors[id].ts_data;
        tsr = bgp->conf->sensors[id].registers;
        if (hot) {
                if (val < ts_data->min_temp + ts_data->hyst_val)
                        ret = -EINVAL;
        } else {
                if (val > ts_data->max_temp + ts_data->hyst_val)
                        ret = -EINVAL;
        }

        if (ret)
                goto exit;

        ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
        if (ret < 0)
                goto exit;

        spin_lock(&bgp->lock);
        ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
        spin_unlock(&bgp->lock);

exit:
        return ret;
}

/**
 * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
 * @bgp: struct ti_bandgap pointer
 * @id: bandgap sensor id
 * @val: value (mCelsius) of a threshold
 * @hot: desired threshold to be read. true if threshold hot, false if
 *       threshold cold
 *
 * It will fetch the required thresholds (hot and cold) for TALERT signal.
 * This function can be used to read t_hot or t_cold, depending on @hot value.
 * Call this function only if bandgap features HAS(TALERT).
 *
 * Return: 0 if no error, -ENOTSUPP if it has no TALERT support, or the
 * corresponding error value if some operation fails.
 */
static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
                                      int *val, bool hot)
{
        struct temp_sensor_registers *tsr;
        u32 temp, mask;
        int ret = 0;

        ret = ti_bandgap_validate(bgp, id);
        if (ret)
                goto exit;

        if (!TI_BANDGAP_HAS(bgp, TALERT)) {
                ret = -ENOTSUPP;
                goto exit;
        }

        tsr = bgp->conf->sensors[id].registers;
        if (hot)
                mask = tsr->threshold_thot_mask;
        else
                mask = tsr->threshold_tcold_mask;

        temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
        temp = (temp & mask) >> __ffs(mask);
        ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
        if (ret) {
                dev_err(bgp->dev, "failed to read thot\n");
                ret = -EIO;
                goto exit;
        }

        *val = temp;

exit:
        return ret;
}

/***   Exposed APIs   ***/

/**
 * ti_bandgap_read_thot() - reads sensor current thot
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @thot: resulting current thot value
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
{
        return _ti_bandgap_read_threshold(bgp, id, thot, true);
}

/**
 * ti_bandgap_write_thot() - sets sensor current thot
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @val: desired thot value
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
{
        return _ti_bandgap_write_threshold(bgp, id, val, true);
}

/**
 * ti_bandgap_read_tcold() - reads sensor current tcold
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @tcold: resulting current tcold value
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
{
        return _ti_bandgap_read_threshold(bgp, id, tcold, false);
}

/**
 * ti_bandgap_write_tcold() - sets the sensor tcold
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @val: desired tcold value
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
{
        return _ti_bandgap_write_threshold(bgp, id, val, false);
}

/**
 * ti_bandgap_read_counter() - read the sensor counter
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @interval: resulting update interval in miliseconds
 */
static void ti_bandgap_read_counter(struct ti_bandgap *bgp, int id,
                                    int *interval)
{
        struct temp_sensor_registers *tsr;
        int time;

        tsr = bgp->conf->sensors[id].registers;
        time = ti_bandgap_readl(bgp, tsr->bgap_counter);
        time = (time & tsr->counter_mask) >>
                                        __ffs(tsr->counter_mask);
        time = time * 1000 / bgp->clk_rate;
        *interval = time;
}

/**
 * ti_bandgap_read_counter_delay() - read the sensor counter delay
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @interval: resulting update interval in miliseconds
 */
static void ti_bandgap_read_counter_delay(struct ti_bandgap *bgp, int id,
                                          int *interval)
{
        struct temp_sensor_registers *tsr;
        int reg_val;

        tsr = bgp->conf->sensors[id].registers;

        reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
        reg_val = (reg_val & tsr->mask_counter_delay_mask) >>
                                __ffs(tsr->mask_counter_delay_mask);
        switch (reg_val) {
        case 0:
                *interval = 0;
                break;
        case 1:
                *interval = 1;
                break;
        case 2:
                *interval = 10;
                break;
        case 3:
                *interval = 100;
                break;
        case 4:
                *interval = 250;
                break;
        case 5:
                *interval = 500;
                break;
        default:
                dev_warn(bgp->dev, "Wrong counter delay value read from register %X",
                         reg_val);
        }
}

/**
 * ti_bandgap_read_update_interval() - read the sensor update interval
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @interval: resulting update interval in miliseconds
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
                                    int *interval)
{
        int ret = 0;

        ret = ti_bandgap_validate(bgp, id);
        if (ret)
                goto exit;

        if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
            !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
                ret = -ENOTSUPP;
                goto exit;
        }

        if (TI_BANDGAP_HAS(bgp, COUNTER)) {
                ti_bandgap_read_counter(bgp, id, interval);
                goto exit;
        }

        ti_bandgap_read_counter_delay(bgp, id, interval);
exit:
        return ret;
}

/**
 * ti_bandgap_write_counter_delay() - set the counter_delay
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @interval: desired update interval in miliseconds
 *
 * Return: 0 on success or the proper error code
 */
static int ti_bandgap_write_counter_delay(struct ti_bandgap *bgp, int id,
                                          u32 interval)
{
        int rval;

        switch (interval) {
        case 0: /* Immediate conversion */
                rval = 0x0;
                break;
        case 1: /* Conversion after ever 1ms */
                rval = 0x1;
                break;
        case 10: /* Conversion after ever 10ms */
                rval = 0x2;
                break;
        case 100: /* Conversion after ever 100ms */
                rval = 0x3;
                break;
        case 250: /* Conversion after ever 250ms */
                rval = 0x4;
                break;
        case 500: /* Conversion after ever 500ms */
                rval = 0x5;
                break;
        default:
                dev_warn(bgp->dev, "Delay %d ms is not supported\n", interval);
                return -EINVAL;
        }

        spin_lock(&bgp->lock);
        RMW_BITS(bgp, id, bgap_mask_ctrl, mask_counter_delay_mask, rval);
        spin_unlock(&bgp->lock);

        return 0;
}

/**
 * ti_bandgap_write_counter() - set the bandgap sensor counter
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @interval: desired update interval in miliseconds
 */
static void ti_bandgap_write_counter(struct ti_bandgap *bgp, int id,
                                     u32 interval)
{
        interval = interval * bgp->clk_rate / 1000;
        spin_lock(&bgp->lock);
        RMW_BITS(bgp, id, bgap_counter, counter_mask, interval);
        spin_unlock(&bgp->lock);
}

/**
 * ti_bandgap_write_update_interval() - set the update interval
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @interval: desired update interval in miliseconds
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
                                     int id, u32 interval)
{
        int ret = ti_bandgap_validate(bgp, id);
        if (ret)
                goto exit;

        if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
            !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
                ret = -ENOTSUPP;
                goto exit;
        }

        if (TI_BANDGAP_HAS(bgp, COUNTER)) {
                ti_bandgap_write_counter(bgp, id, interval);
                goto exit;
        }

        ret = ti_bandgap_write_counter_delay(bgp, id, interval);
exit:
        return ret;
}

/**
 * ti_bandgap_read_temperature() - report current temperature
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @temperature: resulting temperature
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
                                int *temperature)
{
        u32 temp;
        int ret;

        ret = ti_bandgap_validate(bgp, id);
        if (ret)
                return ret;

        spin_lock(&bgp->lock);
        temp = ti_bandgap_read_temp(bgp, id);
        spin_unlock(&bgp->lock);

        ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
        if (ret)
                return -EIO;

        *temperature = temp;

        return 0;
}

/**
 * ti_bandgap_set_sensor_data() - helper function to store thermal
 * framework related data.
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 * @data: thermal framework related data to be stored
 *
 * Return: 0 on success or the proper error code
 */
int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
{
        int ret = ti_bandgap_validate(bgp, id);
        if (ret)
                return ret;

        bgp->regval[id].data = data;

        return 0;
}

/**
 * ti_bandgap_get_sensor_data() - helper function to get thermal
 * framework related data.
 * @bgp: pointer to bandgap instance
 * @id: sensor id
 *
 * Return: data stored by set function with sensor id on success or NULL
 */
void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
{
        int ret = ti_bandgap_validate(bgp, id);
        if (ret)
                return ERR_PTR(ret);

        return bgp->regval[id].data;
}

/***   Helper functions used during device initialization   ***/

/**
 * ti_bandgap_force_single_read() - executes 1 single ADC conversion
 * @bgp: pointer to struct ti_bandgap
 * @id: sensor id which it is desired to read 1 temperature
 *
 * Used to initialize the conversion state machine and set it to a valid
 * state. Called during device initialization and context restore events.
 *
 * Return: 0
 */
static int
ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
{
        u32 temp = 0, counter = 1000;

        /* Select single conversion mode */
        if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
                RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);

        /* Start of Conversion = 1 */
        RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
        /* Wait until DTEMP is updated */
        temp = ti_bandgap_read_temp(bgp, id);

        while ((temp == 0) && --counter)
                temp = ti_bandgap_read_temp(bgp, id);
        /* REVISIT: Check correct condition for end of conversion */

        /* Start of Conversion = 0 */
        RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);

        return 0;
}

/**
 * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
 * @bgp: pointer to struct ti_bandgap
 *
 * Call this function only if HAS(MODE_CONFIG) is set. As this driver may
 * be used for junction temperature monitoring, it is desirable that the
 * sensors are operational all the time, so that alerts are generated
 * properly.
 *
 * Return: 0
 */
static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
{
        int i;

        for (i = 0; i < bgp->conf->sensor_count; i++) {
                /* Perform a single read just before enabling continuous */
                ti_bandgap_force_single_read(bgp, i);
                RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
        }

        return 0;
}

/**
 * ti_bandgap_get_trend() - To fetch the temperature trend of a sensor
 * @bgp: pointer to struct ti_bandgap
 * @id: id of the individual sensor
 * @trend: Pointer to trend.
 *
 * This function needs to be called to fetch the temperature trend of a
 * Particular sensor. The function computes the difference in temperature
 * w.r.t time. For the bandgaps with built in history buffer the temperatures
 * are read from the buffer and for those without the Buffer -ENOTSUPP is
 * returned.
 *
 * Return: 0 if no error, else return corresponding error. If no
 *              error then the trend value is passed on to trend parameter
 */
int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend)
{
        struct temp_sensor_registers *tsr;
        u32 temp1, temp2, reg1, reg2;
        int t1, t2, interval, ret = 0;

        ret = ti_bandgap_validate(bgp, id);
        if (ret)
                goto exit;

        if (!TI_BANDGAP_HAS(bgp, HISTORY_BUFFER) ||
            !TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
                ret = -ENOTSUPP;
                goto exit;
        }

        spin_lock(&bgp->lock);

        tsr = bgp->conf->sensors[id].registers;

        /* Freeze and read the last 2 valid readings */
        RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
        reg1 = tsr->ctrl_dtemp_1;
        reg2 = tsr->ctrl_dtemp_2;

        /* read temperature from history buffer */
        temp1 = ti_bandgap_readl(bgp, reg1);
        temp1 &= tsr->bgap_dtemp_mask;

        temp2 = ti_bandgap_readl(bgp, reg2);
        temp2 &= tsr->bgap_dtemp_mask;

        /* Convert from adc values to mCelsius temperature */
        ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1);
        if (ret)
                goto unfreeze;

        ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2);
        if (ret)
                goto unfreeze;

        /* Fetch the update interval */
        ret = ti_bandgap_read_update_interval(bgp, id, &interval);
        if (ret)
                goto unfreeze;

        /* Set the interval to 1 ms if bandgap counter delay is not set */
        if (interval == 0)
                interval = 1;

        *trend = (t1 - t2) / interval;

        dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n",
                t1, t2, *trend);

unfreeze:
        RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
        spin_unlock(&bgp->lock);
exit:
        return ret;
}

/**
 * ti_bandgap_tshut_init() - setup and initialize tshut handling
 * @bgp: pointer to struct ti_bandgap
 * @pdev: pointer to device struct platform_device
 *
 * Call this function only in case the bandgap features HAS(TSHUT).
 * In this case, the driver needs to handle the TSHUT signal as an IRQ.
 * The IRQ is wired as a GPIO, and for this purpose, it is required
 * to specify which GPIO line is used. TSHUT IRQ is fired anytime
 * one of the bandgap sensors violates the TSHUT high/hot threshold.
 * And in that case, the system must go off.
 *
 * Return: 0 if no error, else error status
 */
static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
                                 struct platform_device *pdev)
{
        int gpio_nr = bgp->tshut_gpio;
        int status;

        /* Request for gpio_86 line */
        status = gpio_request(gpio_nr, "tshut");
        if (status < 0) {
                dev_err(bgp->dev, "Could not request for TSHUT GPIO:%i\n", 86);
                return status;
        }
        status = gpio_direction_input(gpio_nr);
        if (status) {
                dev_err(bgp->dev, "Cannot set input TSHUT GPIO %d\n", gpio_nr);
                return status;
        }

        status = request_irq(gpio_to_irq(gpio_nr), ti_bandgap_tshut_irq_handler,
                             IRQF_TRIGGER_RISING, "tshut", NULL);
        if (status) {
                gpio_free(gpio_nr);
                dev_err(bgp->dev, "request irq failed for TSHUT");
        }

        return 0;
}

/**
 * ti_bandgap_alert_init() - setup and initialize talert handling
 * @bgp: pointer to struct ti_bandgap
 * @pdev: pointer to device struct platform_device
 *
 * Call this function only in case the bandgap features HAS(TALERT).
 * In this case, the driver needs to handle the TALERT signals as an IRQs.
 * TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
 * are violated. In these situation, the driver must reprogram the thresholds,
 * accordingly to specified policy.
 *
 * Return: 0 if no error, else return corresponding error.
 */
static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
                                  struct platform_device *pdev)
{
        int ret;

        bgp->irq = platform_get_irq(pdev, 0);
        if (bgp->irq < 0) {
                dev_err(&pdev->dev, "get_irq failed\n");
                return bgp->irq;
        }
        ret = request_threaded_irq(bgp->irq, NULL,
                                   ti_bandgap_talert_irq_handler,
                                   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
                                   "talert", bgp);
        if (ret) {
                dev_err(&pdev->dev, "Request threaded irq failed.\n");
                return ret;
        }

        return 0;
}

static const struct of_device_id of_ti_bandgap_match[];
/**
 * ti_bandgap_build() - parse DT and setup a struct ti_bandgap
 * @pdev: pointer to device struct platform_device
 *
 * Used to read the device tree properties accordingly to the bandgap
 * matching version. Based on bandgap version and its capabilities it
 * will build a struct ti_bandgap out of the required DT entries.
 *
 * Return: valid bandgap structure if successful, else returns ERR_PTR
 * return value must be verified with IS_ERR.
 */
static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
        struct device_node *node = pdev->dev.of_node;
        const struct of_device_id *of_id;
        struct ti_bandgap *bgp;
        struct resource *res;
        int i;

        /* just for the sake */
        if (!node) {
                dev_err(&pdev->dev, "no platform information available\n");
                return ERR_PTR(-EINVAL);
        }

        bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
        if (!bgp) {
                dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
                return ERR_PTR(-ENOMEM);
        }

        of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
        if (of_id)
                bgp->conf = of_id->data;

        /* register shadow for context save and restore */
        bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
                                   bgp->conf->sensor_count, GFP_KERNEL);
        if (!bgp->regval) {
                dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
                return ERR_PTR(-ENOMEM);
        }

        i = 0;
        do {
                void __iomem *chunk;

                res = platform_get_resource(pdev, IORESOURCE_MEM, i);
                if (!res)
                        break;
                chunk = devm_ioremap_resource(&pdev->dev, res);
                if (i == 0)
                        bgp->base = chunk;
                if (IS_ERR(chunk))
                        return ERR_CAST(chunk);

                i++;
        } while (res);

        if (TI_BANDGAP_HAS(bgp, TSHUT)) {
                bgp->tshut_gpio = of_get_gpio(node, 0);
                if (!gpio_is_valid(bgp->tshut_gpio)) {
                        dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
                                bgp->tshut_gpio);
                        return ERR_PTR(-EINVAL);
                }
        }

        return bgp;
}

/***   Device driver call backs   ***/

static
int ti_bandgap_probe(struct platform_device *pdev)
{
        struct ti_bandgap *bgp;
        int clk_rate, ret = 0, i;

        bgp = ti_bandgap_build(pdev);
        if (IS_ERR(bgp)) {
                dev_err(&pdev->dev, "failed to fetch platform data\n");
                return PTR_ERR(bgp);
        }
        bgp->dev = &pdev->dev;

        if (TI_BANDGAP_HAS(bgp, TSHUT)) {
                ret = ti_bandgap_tshut_init(bgp, pdev);
                if (ret) {
                        dev_err(&pdev->dev,
                                "failed to initialize system tshut IRQ\n");
                        return ret;
                }
        }

        bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
        ret = IS_ERR(bgp->fclock);
        if (ret) {
                dev_err(&pdev->dev, "failed to request fclock reference\n");
                ret = PTR_ERR(bgp->fclock);
                goto free_irqs;
        }

        bgp->div_clk = clk_get(NULL,  bgp->conf->div_ck_name);
        ret = IS_ERR(bgp->div_clk);
        if (ret) {
                dev_err(&pdev->dev,
                        "failed to request div_ts_ck clock ref\n");
                ret = PTR_ERR(bgp->div_clk);
                goto free_irqs;
        }

        for (i = 0; i < bgp->conf->sensor_count; i++) {
                struct temp_sensor_registers *tsr;
                u32 val;

                tsr = bgp->conf->sensors[i].registers;
                /*
                 * check if the efuse has a non-zero value if not
                 * it is an untrimmed sample and the temperatures
                 * may not be accurate
                 */
                val = ti_bandgap_readl(bgp, tsr->bgap_efuse);
                if (ret || !val)
                        dev_info(&pdev->dev,
                                 "Non-trimmed BGAP, Temp not accurate\n");
        }

        clk_rate = clk_round_rate(bgp->div_clk,
                                  bgp->conf->sensors[0].ts_data->max_freq);
        if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq ||
            clk_rate <= 0) {
                ret = -ENODEV;
                dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
                goto put_clks;
        }

        ret = clk_set_rate(bgp->div_clk, clk_rate);
        if (ret)
                dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");

        bgp->clk_rate = clk_rate;
        if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
                clk_prepare_enable(bgp->fclock);


        spin_lock_init(&bgp->lock);
        bgp->dev = &pdev->dev;
        platform_set_drvdata(pdev, bgp);

        ti_bandgap_power(bgp, true);

        /* Set default counter to 1 for now */
        if (TI_BANDGAP_HAS(bgp, COUNTER))
                for (i = 0; i < bgp->conf->sensor_count; i++)
                        RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);

        /* Set default thresholds for alert and shutdown */
        for (i = 0; i < bgp->conf->sensor_count; i++) {
                struct temp_sensor_data *ts_data;

                ts_data = bgp->conf->sensors[i].ts_data;

                if (TI_BANDGAP_HAS(bgp, TALERT)) {
                        /* Set initial Talert thresholds */
                        RMW_BITS(bgp, i, bgap_threshold,
                                 threshold_tcold_mask, ts_data->t_cold);
                        RMW_BITS(bgp, i, bgap_threshold,
                                 threshold_thot_mask, ts_data->t_hot);
                        /* Enable the alert events */
                        RMW_BITS(bgp, i, bgap_mask_ctrl, mask_hot_mask, 1);
                        RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
                }

                if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
                        /* Set initial Tshut thresholds */
                        RMW_BITS(bgp, i, tshut_threshold,
                                 tshut_hot_mask, ts_data->tshut_hot);
                        RMW_BITS(bgp, i, tshut_threshold,
                                 tshut_cold_mask, ts_data->tshut_cold);
                }
        }

        if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
                ti_bandgap_set_continuous_mode(bgp);

        /* Set .250 seconds time as default counter */
        if (TI_BANDGAP_HAS(bgp, COUNTER))
                for (i = 0; i < bgp->conf->sensor_count; i++)
                        RMW_BITS(bgp, i, bgap_counter, counter_mask,
                                 bgp->clk_rate / 4);

        /* Every thing is good? Then expose the sensors */
        for (i = 0; i < bgp->conf->sensor_count; i++) {
                char *domain;

                if (bgp->conf->sensors[i].register_cooling) {
                        ret = bgp->conf->sensors[i].register_cooling(bgp, i);
                        if (ret)
                                goto remove_sensors;
                }

                if (bgp->conf->expose_sensor) {
                        domain = bgp->conf->sensors[i].domain;
                        ret = bgp->conf->expose_sensor(bgp, i, domain);
                        if (ret)
                                goto remove_last_cooling;
                }
        }

        /*
         * Enable the Interrupts once everything is set. Otherwise irq handler
         * might be called as soon as it is enabled where as rest of framework
         * is still getting initialised.
         */
        if (TI_BANDGAP_HAS(bgp, TALERT)) {
                ret = ti_bandgap_talert_init(bgp, pdev);
                if (ret) {
                        dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
                        i = bgp->conf->sensor_count;
                        goto disable_clk;
                }
        }

        return 0;

remove_last_cooling:
        if (bgp->conf->sensors[i].unregister_cooling)
                bgp->conf->sensors[i].unregister_cooling(bgp, i);
remove_sensors:
        for (i--; i >= 0; i--) {
                if (bgp->conf->sensors[i].unregister_cooling)
                        bgp->conf->sensors[i].unregister_cooling(bgp, i);
                if (bgp->conf->remove_sensor)
                        bgp->conf->remove_sensor(bgp, i);
        }
        ti_bandgap_power(bgp, false);
disable_clk:
        if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
                clk_disable_unprepare(bgp->fclock);
put_clks:
        clk_put(bgp->fclock);
        clk_put(bgp->div_clk);
free_irqs:
        if (TI_BANDGAP_HAS(bgp, TSHUT)) {
                free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
                gpio_free(bgp->tshut_gpio);
        }

        return ret;
}

static
int ti_bandgap_remove(struct platform_device *pdev)
{
        struct ti_bandgap *bgp = platform_get_drvdata(pdev);
        int i;

        /* First thing is to remove sensor interfaces */
        for (i = 0; i < bgp->conf->sensor_count; i++) {
                if (bgp->conf->sensors[i].unregister_cooling)
                        bgp->conf->sensors[i].unregister_cooling(bgp, i);

                if (bgp->conf->remove_sensor)
                        bgp->conf->remove_sensor(bgp, i);
        }

        ti_bandgap_power(bgp, false);

        if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
                clk_disable_unprepare(bgp->fclock);
        clk_put(bgp->fclock);
        clk_put(bgp->div_clk);

        if (TI_BANDGAP_HAS(bgp, TALERT))
                free_irq(bgp->irq, bgp);

        if (TI_BANDGAP_HAS(bgp, TSHUT)) {
                free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
                gpio_free(bgp->tshut_gpio);
        }

        return 0;
}

#ifdef CONFIG_PM
static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
{
        int i;

        for (i = 0; i < bgp->conf->sensor_count; i++) {
                struct temp_sensor_registers *tsr;
                struct temp_sensor_regval *rval;

                rval = &bgp->regval[i];
                tsr = bgp->conf->sensors[i].registers;

                if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
                        rval->bg_mode_ctrl = ti_bandgap_readl(bgp,
                                                        tsr->bgap_mode_ctrl);
                if (TI_BANDGAP_HAS(bgp, COUNTER))
                        rval->bg_counter = ti_bandgap_readl(bgp,
                                                        tsr->bgap_counter);
                if (TI_BANDGAP_HAS(bgp, TALERT)) {
                        rval->bg_threshold = ti_bandgap_readl(bgp,
                                                        tsr->bgap_threshold);
                        rval->bg_ctrl = ti_bandgap_readl(bgp,
                                                   tsr->bgap_mask_ctrl);
                }

                if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
                        rval->tshut_threshold = ti_bandgap_readl(bgp,
                                                   tsr->tshut_threshold);
        }

        return 0;
}

static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
{
        int i;

        for (i = 0; i < bgp->conf->sensor_count; i++) {
                struct temp_sensor_registers *tsr;
                struct temp_sensor_regval *rval;
                u32 val = 0;

                rval = &bgp->regval[i];
                tsr = bgp->conf->sensors[i].registers;

                if (TI_BANDGAP_HAS(bgp, COUNTER))
                        val = ti_bandgap_readl(bgp, tsr->bgap_counter);

                if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
                        ti_bandgap_writel(bgp, rval->tshut_threshold,
                                          tsr->tshut_threshold);
                /* Force immediate temperature measurement and update
                 * of the DTEMP field
                 */
                ti_bandgap_force_single_read(bgp, i);

                if (TI_BANDGAP_HAS(bgp, COUNTER))
                        ti_bandgap_writel(bgp, rval->bg_counter,
                                          tsr->bgap_counter);
                if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
                        ti_bandgap_writel(bgp, rval->bg_mode_ctrl,
                                          tsr->bgap_mode_ctrl);
                if (TI_BANDGAP_HAS(bgp, TALERT)) {
                        ti_bandgap_writel(bgp, rval->bg_threshold,
                                          tsr->bgap_threshold);
                        ti_bandgap_writel(bgp, rval->bg_ctrl,
                                          tsr->bgap_mask_ctrl);
                }
        }

        return 0;
}

static int ti_bandgap_suspend(struct device *dev)
{
        struct ti_bandgap *bgp = dev_get_drvdata(dev);
        int err;

        err = ti_bandgap_save_ctxt(bgp);
        ti_bandgap_power(bgp, false);

        if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
                clk_disable_unprepare(bgp->fclock);

        return err;
}

static int ti_bandgap_resume(struct device *dev)
{
        struct ti_bandgap *bgp = dev_get_drvdata(dev);

        if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
                clk_prepare_enable(bgp->fclock);

        ti_bandgap_power(bgp, true);

        return ti_bandgap_restore_ctxt(bgp);
}
static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
                         ti_bandgap_resume);

#define DEV_PM_OPS      (&ti_bandgap_dev_pm_ops)
#else
#define DEV_PM_OPS      NULL
#endif

static const struct of_device_id of_ti_bandgap_match[] = {
#ifdef CONFIG_OMAP4_THERMAL
        {
                .compatible = "ti,omap4430-bandgap",
                .data = (void *)&omap4430_data,
        },
        {
                .compatible = "ti,omap4460-bandgap",
                .data = (void *)&omap4460_data,
        },
        {
                .compatible = "ti,omap4470-bandgap",
                .data = (void *)&omap4470_data,
        },
#endif
#ifdef CONFIG_OMAP5_THERMAL
        {
                .compatible = "ti,omap5430-bandgap",
                .data = (void *)&omap5430_data,
        },
#endif
#ifdef CONFIG_DRA752_THERMAL
        {
                .compatible = "ti,dra752-bandgap",
                .data = (void *)&dra752_data,
        },
#endif
        /* Sentinel */
        { },
};
MODULE_DEVICE_TABLE(of, of_ti_bandgap_match);

static struct platform_driver ti_bandgap_sensor_driver = {
        .probe = ti_bandgap_probe,
        .remove = ti_bandgap_remove,
        .driver = {
                        .name = "ti-soc-thermal",
                        .pm = DEV_PM_OPS,
                        .of_match_table = of_ti_bandgap_match,
        },
};

module_platform_driver(ti_bandgap_sensor_driver);

MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ti-soc-thermal");
MODULE_AUTHOR("Texas Instrument Inc.");