Merge branch 'shmobile' into devel
[linux/fpc-iii.git] / fs / ext3 / resize.c
blob54351ac7cef92deba61a0473ee4ef01589c67c39
1 /*
2 * linux/fs/ext3/resize.c
4 * Support for resizing an ext3 filesystem while it is mounted.
6 * Copyright (C) 2001, 2002 Andreas Dilger <adilger@clusterfs.com>
8 * This could probably be made into a module, because it is not often in use.
9 */
12 #define EXT3FS_DEBUG
14 #include <linux/ext3_jbd.h>
16 #include <linux/errno.h>
17 #include <linux/slab.h>
20 #define outside(b, first, last) ((b) < (first) || (b) >= (last))
21 #define inside(b, first, last) ((b) >= (first) && (b) < (last))
23 static int verify_group_input(struct super_block *sb,
24 struct ext3_new_group_data *input)
26 struct ext3_sb_info *sbi = EXT3_SB(sb);
27 struct ext3_super_block *es = sbi->s_es;
28 ext3_fsblk_t start = le32_to_cpu(es->s_blocks_count);
29 ext3_fsblk_t end = start + input->blocks_count;
30 unsigned group = input->group;
31 ext3_fsblk_t itend = input->inode_table + sbi->s_itb_per_group;
32 unsigned overhead = ext3_bg_has_super(sb, group) ?
33 (1 + ext3_bg_num_gdb(sb, group) +
34 le16_to_cpu(es->s_reserved_gdt_blocks)) : 0;
35 ext3_fsblk_t metaend = start + overhead;
36 struct buffer_head *bh = NULL;
37 ext3_grpblk_t free_blocks_count;
38 int err = -EINVAL;
40 input->free_blocks_count = free_blocks_count =
41 input->blocks_count - 2 - overhead - sbi->s_itb_per_group;
43 if (test_opt(sb, DEBUG))
44 printk(KERN_DEBUG "EXT3-fs: adding %s group %u: %u blocks "
45 "(%d free, %u reserved)\n",
46 ext3_bg_has_super(sb, input->group) ? "normal" :
47 "no-super", input->group, input->blocks_count,
48 free_blocks_count, input->reserved_blocks);
50 if (group != sbi->s_groups_count)
51 ext3_warning(sb, __func__,
52 "Cannot add at group %u (only %lu groups)",
53 input->group, sbi->s_groups_count);
54 else if ((start - le32_to_cpu(es->s_first_data_block)) %
55 EXT3_BLOCKS_PER_GROUP(sb))
56 ext3_warning(sb, __func__, "Last group not full");
57 else if (input->reserved_blocks > input->blocks_count / 5)
58 ext3_warning(sb, __func__, "Reserved blocks too high (%u)",
59 input->reserved_blocks);
60 else if (free_blocks_count < 0)
61 ext3_warning(sb, __func__, "Bad blocks count %u",
62 input->blocks_count);
63 else if (!(bh = sb_bread(sb, end - 1)))
64 ext3_warning(sb, __func__,
65 "Cannot read last block ("E3FSBLK")",
66 end - 1);
67 else if (outside(input->block_bitmap, start, end))
68 ext3_warning(sb, __func__,
69 "Block bitmap not in group (block %u)",
70 input->block_bitmap);
71 else if (outside(input->inode_bitmap, start, end))
72 ext3_warning(sb, __func__,
73 "Inode bitmap not in group (block %u)",
74 input->inode_bitmap);
75 else if (outside(input->inode_table, start, end) ||
76 outside(itend - 1, start, end))
77 ext3_warning(sb, __func__,
78 "Inode table not in group (blocks %u-"E3FSBLK")",
79 input->inode_table, itend - 1);
80 else if (input->inode_bitmap == input->block_bitmap)
81 ext3_warning(sb, __func__,
82 "Block bitmap same as inode bitmap (%u)",
83 input->block_bitmap);
84 else if (inside(input->block_bitmap, input->inode_table, itend))
85 ext3_warning(sb, __func__,
86 "Block bitmap (%u) in inode table (%u-"E3FSBLK")",
87 input->block_bitmap, input->inode_table, itend-1);
88 else if (inside(input->inode_bitmap, input->inode_table, itend))
89 ext3_warning(sb, __func__,
90 "Inode bitmap (%u) in inode table (%u-"E3FSBLK")",
91 input->inode_bitmap, input->inode_table, itend-1);
92 else if (inside(input->block_bitmap, start, metaend))
93 ext3_warning(sb, __func__,
94 "Block bitmap (%u) in GDT table"
95 " ("E3FSBLK"-"E3FSBLK")",
96 input->block_bitmap, start, metaend - 1);
97 else if (inside(input->inode_bitmap, start, metaend))
98 ext3_warning(sb, __func__,
99 "Inode bitmap (%u) in GDT table"
100 " ("E3FSBLK"-"E3FSBLK")",
101 input->inode_bitmap, start, metaend - 1);
102 else if (inside(input->inode_table, start, metaend) ||
103 inside(itend - 1, start, metaend))
104 ext3_warning(sb, __func__,
105 "Inode table (%u-"E3FSBLK") overlaps"
106 "GDT table ("E3FSBLK"-"E3FSBLK")",
107 input->inode_table, itend - 1, start, metaend - 1);
108 else
109 err = 0;
110 brelse(bh);
112 return err;
115 static struct buffer_head *bclean(handle_t *handle, struct super_block *sb,
116 ext3_fsblk_t blk)
118 struct buffer_head *bh;
119 int err;
121 bh = sb_getblk(sb, blk);
122 if (!bh)
123 return ERR_PTR(-EIO);
124 if ((err = ext3_journal_get_write_access(handle, bh))) {
125 brelse(bh);
126 bh = ERR_PTR(err);
127 } else {
128 lock_buffer(bh);
129 memset(bh->b_data, 0, sb->s_blocksize);
130 set_buffer_uptodate(bh);
131 unlock_buffer(bh);
134 return bh;
138 * To avoid calling the atomic setbit hundreds or thousands of times, we only
139 * need to use it within a single byte (to ensure we get endianness right).
140 * We can use memset for the rest of the bitmap as there are no other users.
142 static void mark_bitmap_end(int start_bit, int end_bit, char *bitmap)
144 int i;
146 if (start_bit >= end_bit)
147 return;
149 ext3_debug("mark end bits +%d through +%d used\n", start_bit, end_bit);
150 for (i = start_bit; i < ((start_bit + 7) & ~7UL); i++)
151 ext3_set_bit(i, bitmap);
152 if (i < end_bit)
153 memset(bitmap + (i >> 3), 0xff, (end_bit - i) >> 3);
157 * If we have fewer than thresh credits, extend by EXT3_MAX_TRANS_DATA.
158 * If that fails, restart the transaction & regain write access for the
159 * buffer head which is used for block_bitmap modifications.
161 static int extend_or_restart_transaction(handle_t *handle, int thresh,
162 struct buffer_head *bh)
164 int err;
166 if (handle->h_buffer_credits >= thresh)
167 return 0;
169 err = ext3_journal_extend(handle, EXT3_MAX_TRANS_DATA);
170 if (err < 0)
171 return err;
172 if (err) {
173 err = ext3_journal_restart(handle, EXT3_MAX_TRANS_DATA);
174 if (err)
175 return err;
176 err = ext3_journal_get_write_access(handle, bh);
177 if (err)
178 return err;
181 return 0;
185 * Set up the block and inode bitmaps, and the inode table for the new group.
186 * This doesn't need to be part of the main transaction, since we are only
187 * changing blocks outside the actual filesystem. We still do journaling to
188 * ensure the recovery is correct in case of a failure just after resize.
189 * If any part of this fails, we simply abort the resize.
191 static int setup_new_group_blocks(struct super_block *sb,
192 struct ext3_new_group_data *input)
194 struct ext3_sb_info *sbi = EXT3_SB(sb);
195 ext3_fsblk_t start = ext3_group_first_block_no(sb, input->group);
196 int reserved_gdb = ext3_bg_has_super(sb, input->group) ?
197 le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) : 0;
198 unsigned long gdblocks = ext3_bg_num_gdb(sb, input->group);
199 struct buffer_head *bh;
200 handle_t *handle;
201 ext3_fsblk_t block;
202 ext3_grpblk_t bit;
203 int i;
204 int err = 0, err2;
206 /* This transaction may be extended/restarted along the way */
207 handle = ext3_journal_start_sb(sb, EXT3_MAX_TRANS_DATA);
209 if (IS_ERR(handle))
210 return PTR_ERR(handle);
212 mutex_lock(&sbi->s_resize_lock);
213 if (input->group != sbi->s_groups_count) {
214 err = -EBUSY;
215 goto exit_journal;
218 if (IS_ERR(bh = bclean(handle, sb, input->block_bitmap))) {
219 err = PTR_ERR(bh);
220 goto exit_journal;
223 if (ext3_bg_has_super(sb, input->group)) {
224 ext3_debug("mark backup superblock %#04lx (+0)\n", start);
225 ext3_set_bit(0, bh->b_data);
228 /* Copy all of the GDT blocks into the backup in this group */
229 for (i = 0, bit = 1, block = start + 1;
230 i < gdblocks; i++, block++, bit++) {
231 struct buffer_head *gdb;
233 ext3_debug("update backup group %#04lx (+%d)\n", block, bit);
235 err = extend_or_restart_transaction(handle, 1, bh);
236 if (err)
237 goto exit_bh;
239 gdb = sb_getblk(sb, block);
240 if (!gdb) {
241 err = -EIO;
242 goto exit_bh;
244 if ((err = ext3_journal_get_write_access(handle, gdb))) {
245 brelse(gdb);
246 goto exit_bh;
248 lock_buffer(gdb);
249 memcpy(gdb->b_data, sbi->s_group_desc[i]->b_data, gdb->b_size);
250 set_buffer_uptodate(gdb);
251 unlock_buffer(gdb);
252 ext3_journal_dirty_metadata(handle, gdb);
253 ext3_set_bit(bit, bh->b_data);
254 brelse(gdb);
257 /* Zero out all of the reserved backup group descriptor table blocks */
258 for (i = 0, bit = gdblocks + 1, block = start + bit;
259 i < reserved_gdb; i++, block++, bit++) {
260 struct buffer_head *gdb;
262 ext3_debug("clear reserved block %#04lx (+%d)\n", block, bit);
264 err = extend_or_restart_transaction(handle, 1, bh);
265 if (err)
266 goto exit_bh;
268 if (IS_ERR(gdb = bclean(handle, sb, block))) {
269 err = PTR_ERR(gdb);
270 goto exit_bh;
272 ext3_journal_dirty_metadata(handle, gdb);
273 ext3_set_bit(bit, bh->b_data);
274 brelse(gdb);
276 ext3_debug("mark block bitmap %#04x (+%ld)\n", input->block_bitmap,
277 input->block_bitmap - start);
278 ext3_set_bit(input->block_bitmap - start, bh->b_data);
279 ext3_debug("mark inode bitmap %#04x (+%ld)\n", input->inode_bitmap,
280 input->inode_bitmap - start);
281 ext3_set_bit(input->inode_bitmap - start, bh->b_data);
283 /* Zero out all of the inode table blocks */
284 for (i = 0, block = input->inode_table, bit = block - start;
285 i < sbi->s_itb_per_group; i++, bit++, block++) {
286 struct buffer_head *it;
288 ext3_debug("clear inode block %#04lx (+%d)\n", block, bit);
290 err = extend_or_restart_transaction(handle, 1, bh);
291 if (err)
292 goto exit_bh;
294 if (IS_ERR(it = bclean(handle, sb, block))) {
295 err = PTR_ERR(it);
296 goto exit_bh;
298 ext3_journal_dirty_metadata(handle, it);
299 brelse(it);
300 ext3_set_bit(bit, bh->b_data);
303 err = extend_or_restart_transaction(handle, 2, bh);
304 if (err)
305 goto exit_bh;
307 mark_bitmap_end(input->blocks_count, EXT3_BLOCKS_PER_GROUP(sb),
308 bh->b_data);
309 ext3_journal_dirty_metadata(handle, bh);
310 brelse(bh);
312 /* Mark unused entries in inode bitmap used */
313 ext3_debug("clear inode bitmap %#04x (+%ld)\n",
314 input->inode_bitmap, input->inode_bitmap - start);
315 if (IS_ERR(bh = bclean(handle, sb, input->inode_bitmap))) {
316 err = PTR_ERR(bh);
317 goto exit_journal;
320 mark_bitmap_end(EXT3_INODES_PER_GROUP(sb), EXT3_BLOCKS_PER_GROUP(sb),
321 bh->b_data);
322 ext3_journal_dirty_metadata(handle, bh);
323 exit_bh:
324 brelse(bh);
326 exit_journal:
327 mutex_unlock(&sbi->s_resize_lock);
328 if ((err2 = ext3_journal_stop(handle)) && !err)
329 err = err2;
331 return err;
335 * Iterate through the groups which hold BACKUP superblock/GDT copies in an
336 * ext3 filesystem. The counters should be initialized to 1, 5, and 7 before
337 * calling this for the first time. In a sparse filesystem it will be the
338 * sequence of powers of 3, 5, and 7: 1, 3, 5, 7, 9, 25, 27, 49, 81, ...
339 * For a non-sparse filesystem it will be every group: 1, 2, 3, 4, ...
341 static unsigned ext3_list_backups(struct super_block *sb, unsigned *three,
342 unsigned *five, unsigned *seven)
344 unsigned *min = three;
345 int mult = 3;
346 unsigned ret;
348 if (!EXT3_HAS_RO_COMPAT_FEATURE(sb,
349 EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)) {
350 ret = *min;
351 *min += 1;
352 return ret;
355 if (*five < *min) {
356 min = five;
357 mult = 5;
359 if (*seven < *min) {
360 min = seven;
361 mult = 7;
364 ret = *min;
365 *min *= mult;
367 return ret;
371 * Check that all of the backup GDT blocks are held in the primary GDT block.
372 * It is assumed that they are stored in group order. Returns the number of
373 * groups in current filesystem that have BACKUPS, or -ve error code.
375 static int verify_reserved_gdb(struct super_block *sb,
376 struct buffer_head *primary)
378 const ext3_fsblk_t blk = primary->b_blocknr;
379 const unsigned long end = EXT3_SB(sb)->s_groups_count;
380 unsigned three = 1;
381 unsigned five = 5;
382 unsigned seven = 7;
383 unsigned grp;
384 __le32 *p = (__le32 *)primary->b_data;
385 int gdbackups = 0;
387 while ((grp = ext3_list_backups(sb, &three, &five, &seven)) < end) {
388 if (le32_to_cpu(*p++) != grp * EXT3_BLOCKS_PER_GROUP(sb) + blk){
389 ext3_warning(sb, __func__,
390 "reserved GDT "E3FSBLK
391 " missing grp %d ("E3FSBLK")",
392 blk, grp,
393 grp * EXT3_BLOCKS_PER_GROUP(sb) + blk);
394 return -EINVAL;
396 if (++gdbackups > EXT3_ADDR_PER_BLOCK(sb))
397 return -EFBIG;
400 return gdbackups;
404 * Called when we need to bring a reserved group descriptor table block into
405 * use from the resize inode. The primary copy of the new GDT block currently
406 * is an indirect block (under the double indirect block in the resize inode).
407 * The new backup GDT blocks will be stored as leaf blocks in this indirect
408 * block, in group order. Even though we know all the block numbers we need,
409 * we check to ensure that the resize inode has actually reserved these blocks.
411 * Don't need to update the block bitmaps because the blocks are still in use.
413 * We get all of the error cases out of the way, so that we are sure to not
414 * fail once we start modifying the data on disk, because JBD has no rollback.
416 static int add_new_gdb(handle_t *handle, struct inode *inode,
417 struct ext3_new_group_data *input,
418 struct buffer_head **primary)
420 struct super_block *sb = inode->i_sb;
421 struct ext3_super_block *es = EXT3_SB(sb)->s_es;
422 unsigned long gdb_num = input->group / EXT3_DESC_PER_BLOCK(sb);
423 ext3_fsblk_t gdblock = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + gdb_num;
424 struct buffer_head **o_group_desc, **n_group_desc;
425 struct buffer_head *dind;
426 int gdbackups;
427 struct ext3_iloc iloc;
428 __le32 *data;
429 int err;
431 if (test_opt(sb, DEBUG))
432 printk(KERN_DEBUG
433 "EXT3-fs: ext3_add_new_gdb: adding group block %lu\n",
434 gdb_num);
437 * If we are not using the primary superblock/GDT copy don't resize,
438 * because the user tools have no way of handling this. Probably a
439 * bad time to do it anyways.
441 if (EXT3_SB(sb)->s_sbh->b_blocknr !=
442 le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block)) {
443 ext3_warning(sb, __func__,
444 "won't resize using backup superblock at %llu",
445 (unsigned long long)EXT3_SB(sb)->s_sbh->b_blocknr);
446 return -EPERM;
449 *primary = sb_bread(sb, gdblock);
450 if (!*primary)
451 return -EIO;
453 if ((gdbackups = verify_reserved_gdb(sb, *primary)) < 0) {
454 err = gdbackups;
455 goto exit_bh;
458 data = EXT3_I(inode)->i_data + EXT3_DIND_BLOCK;
459 dind = sb_bread(sb, le32_to_cpu(*data));
460 if (!dind) {
461 err = -EIO;
462 goto exit_bh;
465 data = (__le32 *)dind->b_data;
466 if (le32_to_cpu(data[gdb_num % EXT3_ADDR_PER_BLOCK(sb)]) != gdblock) {
467 ext3_warning(sb, __func__,
468 "new group %u GDT block "E3FSBLK" not reserved",
469 input->group, gdblock);
470 err = -EINVAL;
471 goto exit_dind;
474 if ((err = ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh)))
475 goto exit_dind;
477 if ((err = ext3_journal_get_write_access(handle, *primary)))
478 goto exit_sbh;
480 if ((err = ext3_journal_get_write_access(handle, dind)))
481 goto exit_primary;
483 /* ext3_reserve_inode_write() gets a reference on the iloc */
484 if ((err = ext3_reserve_inode_write(handle, inode, &iloc)))
485 goto exit_dindj;
487 n_group_desc = kmalloc((gdb_num + 1) * sizeof(struct buffer_head *),
488 GFP_NOFS);
489 if (!n_group_desc) {
490 err = -ENOMEM;
491 ext3_warning (sb, __func__,
492 "not enough memory for %lu groups", gdb_num + 1);
493 goto exit_inode;
497 * Finally, we have all of the possible failures behind us...
499 * Remove new GDT block from inode double-indirect block and clear out
500 * the new GDT block for use (which also "frees" the backup GDT blocks
501 * from the reserved inode). We don't need to change the bitmaps for
502 * these blocks, because they are marked as in-use from being in the
503 * reserved inode, and will become GDT blocks (primary and backup).
505 data[gdb_num % EXT3_ADDR_PER_BLOCK(sb)] = 0;
506 ext3_journal_dirty_metadata(handle, dind);
507 brelse(dind);
508 inode->i_blocks -= (gdbackups + 1) * sb->s_blocksize >> 9;
509 ext3_mark_iloc_dirty(handle, inode, &iloc);
510 memset((*primary)->b_data, 0, sb->s_blocksize);
511 ext3_journal_dirty_metadata(handle, *primary);
513 o_group_desc = EXT3_SB(sb)->s_group_desc;
514 memcpy(n_group_desc, o_group_desc,
515 EXT3_SB(sb)->s_gdb_count * sizeof(struct buffer_head *));
516 n_group_desc[gdb_num] = *primary;
517 EXT3_SB(sb)->s_group_desc = n_group_desc;
518 EXT3_SB(sb)->s_gdb_count++;
519 kfree(o_group_desc);
521 le16_add_cpu(&es->s_reserved_gdt_blocks, -1);
522 ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
524 return 0;
526 exit_inode:
527 //ext3_journal_release_buffer(handle, iloc.bh);
528 brelse(iloc.bh);
529 exit_dindj:
530 //ext3_journal_release_buffer(handle, dind);
531 exit_primary:
532 //ext3_journal_release_buffer(handle, *primary);
533 exit_sbh:
534 //ext3_journal_release_buffer(handle, *primary);
535 exit_dind:
536 brelse(dind);
537 exit_bh:
538 brelse(*primary);
540 ext3_debug("leaving with error %d\n", err);
541 return err;
545 * Called when we are adding a new group which has a backup copy of each of
546 * the GDT blocks (i.e. sparse group) and there are reserved GDT blocks.
547 * We need to add these reserved backup GDT blocks to the resize inode, so
548 * that they are kept for future resizing and not allocated to files.
550 * Each reserved backup GDT block will go into a different indirect block.
551 * The indirect blocks are actually the primary reserved GDT blocks,
552 * so we know in advance what their block numbers are. We only get the
553 * double-indirect block to verify it is pointing to the primary reserved
554 * GDT blocks so we don't overwrite a data block by accident. The reserved
555 * backup GDT blocks are stored in their reserved primary GDT block.
557 static int reserve_backup_gdb(handle_t *handle, struct inode *inode,
558 struct ext3_new_group_data *input)
560 struct super_block *sb = inode->i_sb;
561 int reserved_gdb =le16_to_cpu(EXT3_SB(sb)->s_es->s_reserved_gdt_blocks);
562 struct buffer_head **primary;
563 struct buffer_head *dind;
564 struct ext3_iloc iloc;
565 ext3_fsblk_t blk;
566 __le32 *data, *end;
567 int gdbackups = 0;
568 int res, i;
569 int err;
571 primary = kmalloc(reserved_gdb * sizeof(*primary), GFP_NOFS);
572 if (!primary)
573 return -ENOMEM;
575 data = EXT3_I(inode)->i_data + EXT3_DIND_BLOCK;
576 dind = sb_bread(sb, le32_to_cpu(*data));
577 if (!dind) {
578 err = -EIO;
579 goto exit_free;
582 blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count;
583 data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count %
584 EXT3_ADDR_PER_BLOCK(sb));
585 end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb);
587 /* Get each reserved primary GDT block and verify it holds backups */
588 for (res = 0; res < reserved_gdb; res++, blk++) {
589 if (le32_to_cpu(*data) != blk) {
590 ext3_warning(sb, __func__,
591 "reserved block "E3FSBLK
592 " not at offset %ld",
593 blk,
594 (long)(data - (__le32 *)dind->b_data));
595 err = -EINVAL;
596 goto exit_bh;
598 primary[res] = sb_bread(sb, blk);
599 if (!primary[res]) {
600 err = -EIO;
601 goto exit_bh;
603 if ((gdbackups = verify_reserved_gdb(sb, primary[res])) < 0) {
604 brelse(primary[res]);
605 err = gdbackups;
606 goto exit_bh;
608 if (++data >= end)
609 data = (__le32 *)dind->b_data;
612 for (i = 0; i < reserved_gdb; i++) {
613 if ((err = ext3_journal_get_write_access(handle, primary[i]))) {
615 int j;
616 for (j = 0; j < i; j++)
617 ext3_journal_release_buffer(handle, primary[j]);
619 goto exit_bh;
623 if ((err = ext3_reserve_inode_write(handle, inode, &iloc)))
624 goto exit_bh;
627 * Finally we can add each of the reserved backup GDT blocks from
628 * the new group to its reserved primary GDT block.
630 blk = input->group * EXT3_BLOCKS_PER_GROUP(sb);
631 for (i = 0; i < reserved_gdb; i++) {
632 int err2;
633 data = (__le32 *)primary[i]->b_data;
634 /* printk("reserving backup %lu[%u] = %lu\n",
635 primary[i]->b_blocknr, gdbackups,
636 blk + primary[i]->b_blocknr); */
637 data[gdbackups] = cpu_to_le32(blk + primary[i]->b_blocknr);
638 err2 = ext3_journal_dirty_metadata(handle, primary[i]);
639 if (!err)
640 err = err2;
642 inode->i_blocks += reserved_gdb * sb->s_blocksize >> 9;
643 ext3_mark_iloc_dirty(handle, inode, &iloc);
645 exit_bh:
646 while (--res >= 0)
647 brelse(primary[res]);
648 brelse(dind);
650 exit_free:
651 kfree(primary);
653 return err;
657 * Update the backup copies of the ext3 metadata. These don't need to be part
658 * of the main resize transaction, because e2fsck will re-write them if there
659 * is a problem (basically only OOM will cause a problem). However, we
660 * _should_ update the backups if possible, in case the primary gets trashed
661 * for some reason and we need to run e2fsck from a backup superblock. The
662 * important part is that the new block and inode counts are in the backup
663 * superblocks, and the location of the new group metadata in the GDT backups.
665 * We do not need take the s_resize_lock for this, because these
666 * blocks are not otherwise touched by the filesystem code when it is
667 * mounted. We don't need to worry about last changing from
668 * sbi->s_groups_count, because the worst that can happen is that we
669 * do not copy the full number of backups at this time. The resize
670 * which changed s_groups_count will backup again.
672 static void update_backups(struct super_block *sb,
673 int blk_off, char *data, int size)
675 struct ext3_sb_info *sbi = EXT3_SB(sb);
676 const unsigned long last = sbi->s_groups_count;
677 const int bpg = EXT3_BLOCKS_PER_GROUP(sb);
678 unsigned three = 1;
679 unsigned five = 5;
680 unsigned seven = 7;
681 unsigned group;
682 int rest = sb->s_blocksize - size;
683 handle_t *handle;
684 int err = 0, err2;
686 handle = ext3_journal_start_sb(sb, EXT3_MAX_TRANS_DATA);
687 if (IS_ERR(handle)) {
688 group = 1;
689 err = PTR_ERR(handle);
690 goto exit_err;
693 while ((group = ext3_list_backups(sb, &three, &five, &seven)) < last) {
694 struct buffer_head *bh;
696 /* Out of journal space, and can't get more - abort - so sad */
697 if (handle->h_buffer_credits == 0 &&
698 ext3_journal_extend(handle, EXT3_MAX_TRANS_DATA) &&
699 (err = ext3_journal_restart(handle, EXT3_MAX_TRANS_DATA)))
700 break;
702 bh = sb_getblk(sb, group * bpg + blk_off);
703 if (!bh) {
704 err = -EIO;
705 break;
707 ext3_debug("update metadata backup %#04lx\n",
708 (unsigned long)bh->b_blocknr);
709 if ((err = ext3_journal_get_write_access(handle, bh)))
710 break;
711 lock_buffer(bh);
712 memcpy(bh->b_data, data, size);
713 if (rest)
714 memset(bh->b_data + size, 0, rest);
715 set_buffer_uptodate(bh);
716 unlock_buffer(bh);
717 ext3_journal_dirty_metadata(handle, bh);
718 brelse(bh);
720 if ((err2 = ext3_journal_stop(handle)) && !err)
721 err = err2;
724 * Ugh! Need to have e2fsck write the backup copies. It is too
725 * late to revert the resize, we shouldn't fail just because of
726 * the backup copies (they are only needed in case of corruption).
728 * However, if we got here we have a journal problem too, so we
729 * can't really start a transaction to mark the superblock.
730 * Chicken out and just set the flag on the hope it will be written
731 * to disk, and if not - we will simply wait until next fsck.
733 exit_err:
734 if (err) {
735 ext3_warning(sb, __func__,
736 "can't update backup for group %d (err %d), "
737 "forcing fsck on next reboot", group, err);
738 sbi->s_mount_state &= ~EXT3_VALID_FS;
739 sbi->s_es->s_state &= cpu_to_le16(~EXT3_VALID_FS);
740 mark_buffer_dirty(sbi->s_sbh);
744 /* Add group descriptor data to an existing or new group descriptor block.
745 * Ensure we handle all possible error conditions _before_ we start modifying
746 * the filesystem, because we cannot abort the transaction and not have it
747 * write the data to disk.
749 * If we are on a GDT block boundary, we need to get the reserved GDT block.
750 * Otherwise, we may need to add backup GDT blocks for a sparse group.
752 * We only need to hold the superblock lock while we are actually adding
753 * in the new group's counts to the superblock. Prior to that we have
754 * not really "added" the group at all. We re-check that we are still
755 * adding in the last group in case things have changed since verifying.
757 int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input)
759 struct ext3_sb_info *sbi = EXT3_SB(sb);
760 struct ext3_super_block *es = sbi->s_es;
761 int reserved_gdb = ext3_bg_has_super(sb, input->group) ?
762 le16_to_cpu(es->s_reserved_gdt_blocks) : 0;
763 struct buffer_head *primary = NULL;
764 struct ext3_group_desc *gdp;
765 struct inode *inode = NULL;
766 handle_t *handle;
767 int gdb_off, gdb_num;
768 int err, err2;
770 gdb_num = input->group / EXT3_DESC_PER_BLOCK(sb);
771 gdb_off = input->group % EXT3_DESC_PER_BLOCK(sb);
773 if (gdb_off == 0 && !EXT3_HAS_RO_COMPAT_FEATURE(sb,
774 EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)) {
775 ext3_warning(sb, __func__,
776 "Can't resize non-sparse filesystem further");
777 return -EPERM;
780 if (le32_to_cpu(es->s_blocks_count) + input->blocks_count <
781 le32_to_cpu(es->s_blocks_count)) {
782 ext3_warning(sb, __func__, "blocks_count overflow\n");
783 return -EINVAL;
786 if (le32_to_cpu(es->s_inodes_count) + EXT3_INODES_PER_GROUP(sb) <
787 le32_to_cpu(es->s_inodes_count)) {
788 ext3_warning(sb, __func__, "inodes_count overflow\n");
789 return -EINVAL;
792 if (reserved_gdb || gdb_off == 0) {
793 if (!EXT3_HAS_COMPAT_FEATURE(sb,
794 EXT3_FEATURE_COMPAT_RESIZE_INODE)
795 || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
796 ext3_warning(sb, __func__,
797 "No reserved GDT blocks, can't resize");
798 return -EPERM;
800 inode = ext3_iget(sb, EXT3_RESIZE_INO);
801 if (IS_ERR(inode)) {
802 ext3_warning(sb, __func__,
803 "Error opening resize inode");
804 return PTR_ERR(inode);
808 if ((err = verify_group_input(sb, input)))
809 goto exit_put;
811 if ((err = setup_new_group_blocks(sb, input)))
812 goto exit_put;
815 * We will always be modifying at least the superblock and a GDT
816 * block. If we are adding a group past the last current GDT block,
817 * we will also modify the inode and the dindirect block. If we
818 * are adding a group with superblock/GDT backups we will also
819 * modify each of the reserved GDT dindirect blocks.
821 handle = ext3_journal_start_sb(sb,
822 ext3_bg_has_super(sb, input->group) ?
823 3 + reserved_gdb : 4);
824 if (IS_ERR(handle)) {
825 err = PTR_ERR(handle);
826 goto exit_put;
829 mutex_lock(&sbi->s_resize_lock);
830 if (input->group != sbi->s_groups_count) {
831 ext3_warning(sb, __func__,
832 "multiple resizers run on filesystem!");
833 err = -EBUSY;
834 goto exit_journal;
837 if ((err = ext3_journal_get_write_access(handle, sbi->s_sbh)))
838 goto exit_journal;
841 * We will only either add reserved group blocks to a backup group
842 * or remove reserved blocks for the first group in a new group block.
843 * Doing both would be mean more complex code, and sane people don't
844 * use non-sparse filesystems anymore. This is already checked above.
846 if (gdb_off) {
847 primary = sbi->s_group_desc[gdb_num];
848 if ((err = ext3_journal_get_write_access(handle, primary)))
849 goto exit_journal;
851 if (reserved_gdb && ext3_bg_num_gdb(sb, input->group) &&
852 (err = reserve_backup_gdb(handle, inode, input)))
853 goto exit_journal;
854 } else if ((err = add_new_gdb(handle, inode, input, &primary)))
855 goto exit_journal;
858 * OK, now we've set up the new group. Time to make it active.
860 * We do not lock all allocations via s_resize_lock
861 * so we have to be safe wrt. concurrent accesses the group
862 * data. So we need to be careful to set all of the relevant
863 * group descriptor data etc. *before* we enable the group.
865 * The key field here is sbi->s_groups_count: as long as
866 * that retains its old value, nobody is going to access the new
867 * group.
869 * So first we update all the descriptor metadata for the new
870 * group; then we update the total disk blocks count; then we
871 * update the groups count to enable the group; then finally we
872 * update the free space counts so that the system can start
873 * using the new disk blocks.
876 /* Update group descriptor block for new group */
877 gdp = (struct ext3_group_desc *)primary->b_data + gdb_off;
879 gdp->bg_block_bitmap = cpu_to_le32(input->block_bitmap);
880 gdp->bg_inode_bitmap = cpu_to_le32(input->inode_bitmap);
881 gdp->bg_inode_table = cpu_to_le32(input->inode_table);
882 gdp->bg_free_blocks_count = cpu_to_le16(input->free_blocks_count);
883 gdp->bg_free_inodes_count = cpu_to_le16(EXT3_INODES_PER_GROUP(sb));
886 * Make the new blocks and inodes valid next. We do this before
887 * increasing the group count so that once the group is enabled,
888 * all of its blocks and inodes are already valid.
890 * We always allocate group-by-group, then block-by-block or
891 * inode-by-inode within a group, so enabling these
892 * blocks/inodes before the group is live won't actually let us
893 * allocate the new space yet.
895 le32_add_cpu(&es->s_blocks_count, input->blocks_count);
896 le32_add_cpu(&es->s_inodes_count, EXT3_INODES_PER_GROUP(sb));
899 * We need to protect s_groups_count against other CPUs seeing
900 * inconsistent state in the superblock.
902 * The precise rules we use are:
904 * * Writers of s_groups_count *must* hold s_resize_lock
905 * AND
906 * * Writers must perform a smp_wmb() after updating all dependent
907 * data and before modifying the groups count
909 * * Readers must hold s_resize_lock over the access
910 * OR
911 * * Readers must perform an smp_rmb() after reading the groups count
912 * and before reading any dependent data.
914 * NB. These rules can be relaxed when checking the group count
915 * while freeing data, as we can only allocate from a block
916 * group after serialising against the group count, and we can
917 * only then free after serialising in turn against that
918 * allocation.
920 smp_wmb();
922 /* Update the global fs size fields */
923 sbi->s_groups_count++;
925 ext3_journal_dirty_metadata(handle, primary);
927 /* Update the reserved block counts only once the new group is
928 * active. */
929 le32_add_cpu(&es->s_r_blocks_count, input->reserved_blocks);
931 /* Update the free space counts */
932 percpu_counter_add(&sbi->s_freeblocks_counter,
933 input->free_blocks_count);
934 percpu_counter_add(&sbi->s_freeinodes_counter,
935 EXT3_INODES_PER_GROUP(sb));
937 ext3_journal_dirty_metadata(handle, sbi->s_sbh);
939 exit_journal:
940 mutex_unlock(&sbi->s_resize_lock);
941 if ((err2 = ext3_journal_stop(handle)) && !err)
942 err = err2;
943 if (!err) {
944 update_backups(sb, sbi->s_sbh->b_blocknr, (char *)es,
945 sizeof(struct ext3_super_block));
946 update_backups(sb, primary->b_blocknr, primary->b_data,
947 primary->b_size);
949 exit_put:
950 iput(inode);
951 return err;
952 } /* ext3_group_add */
954 /* Extend the filesystem to the new number of blocks specified. This entry
955 * point is only used to extend the current filesystem to the end of the last
956 * existing group. It can be accessed via ioctl, or by "remount,resize=<size>"
957 * for emergencies (because it has no dependencies on reserved blocks).
959 * If we _really_ wanted, we could use default values to call ext3_group_add()
960 * allow the "remount" trick to work for arbitrary resizing, assuming enough
961 * GDT blocks are reserved to grow to the desired size.
963 int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es,
964 ext3_fsblk_t n_blocks_count)
966 ext3_fsblk_t o_blocks_count;
967 unsigned long o_groups_count;
968 ext3_grpblk_t last;
969 ext3_grpblk_t add;
970 struct buffer_head * bh;
971 handle_t *handle;
972 int err;
973 unsigned long freed_blocks;
975 /* We don't need to worry about locking wrt other resizers just
976 * yet: we're going to revalidate es->s_blocks_count after
977 * taking the s_resize_lock below. */
978 o_blocks_count = le32_to_cpu(es->s_blocks_count);
979 o_groups_count = EXT3_SB(sb)->s_groups_count;
981 if (test_opt(sb, DEBUG))
982 printk(KERN_DEBUG "EXT3-fs: extending last group from "E3FSBLK" uto "E3FSBLK" blocks\n",
983 o_blocks_count, n_blocks_count);
985 if (n_blocks_count == 0 || n_blocks_count == o_blocks_count)
986 return 0;
988 if (n_blocks_count > (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) {
989 printk(KERN_ERR "EXT3-fs: filesystem on %s:"
990 " too large to resize to %lu blocks safely\n",
991 sb->s_id, n_blocks_count);
992 if (sizeof(sector_t) < 8)
993 ext3_warning(sb, __func__,
994 "CONFIG_LBDAF not enabled\n");
995 return -EINVAL;
998 if (n_blocks_count < o_blocks_count) {
999 ext3_warning(sb, __func__,
1000 "can't shrink FS - resize aborted");
1001 return -EBUSY;
1004 /* Handle the remaining blocks in the last group only. */
1005 last = (o_blocks_count - le32_to_cpu(es->s_first_data_block)) %
1006 EXT3_BLOCKS_PER_GROUP(sb);
1008 if (last == 0) {
1009 ext3_warning(sb, __func__,
1010 "need to use ext2online to resize further");
1011 return -EPERM;
1014 add = EXT3_BLOCKS_PER_GROUP(sb) - last;
1016 if (o_blocks_count + add < o_blocks_count) {
1017 ext3_warning(sb, __func__, "blocks_count overflow");
1018 return -EINVAL;
1021 if (o_blocks_count + add > n_blocks_count)
1022 add = n_blocks_count - o_blocks_count;
1024 if (o_blocks_count + add < n_blocks_count)
1025 ext3_warning(sb, __func__,
1026 "will only finish group ("E3FSBLK
1027 " blocks, %u new)",
1028 o_blocks_count + add, add);
1030 /* See if the device is actually as big as what was requested */
1031 bh = sb_bread(sb, o_blocks_count + add -1);
1032 if (!bh) {
1033 ext3_warning(sb, __func__,
1034 "can't read last block, resize aborted");
1035 return -ENOSPC;
1037 brelse(bh);
1039 /* We will update the superblock, one block bitmap, and
1040 * one group descriptor via ext3_free_blocks().
1042 handle = ext3_journal_start_sb(sb, 3);
1043 if (IS_ERR(handle)) {
1044 err = PTR_ERR(handle);
1045 ext3_warning(sb, __func__, "error %d on journal start",err);
1046 goto exit_put;
1049 mutex_lock(&EXT3_SB(sb)->s_resize_lock);
1050 if (o_blocks_count != le32_to_cpu(es->s_blocks_count)) {
1051 ext3_warning(sb, __func__,
1052 "multiple resizers run on filesystem!");
1053 mutex_unlock(&EXT3_SB(sb)->s_resize_lock);
1054 ext3_journal_stop(handle);
1055 err = -EBUSY;
1056 goto exit_put;
1059 if ((err = ext3_journal_get_write_access(handle,
1060 EXT3_SB(sb)->s_sbh))) {
1061 ext3_warning(sb, __func__,
1062 "error %d on journal write access", err);
1063 mutex_unlock(&EXT3_SB(sb)->s_resize_lock);
1064 ext3_journal_stop(handle);
1065 goto exit_put;
1067 es->s_blocks_count = cpu_to_le32(o_blocks_count + add);
1068 ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
1069 mutex_unlock(&EXT3_SB(sb)->s_resize_lock);
1070 ext3_debug("freeing blocks %lu through "E3FSBLK"\n", o_blocks_count,
1071 o_blocks_count + add);
1072 ext3_free_blocks_sb(handle, sb, o_blocks_count, add, &freed_blocks);
1073 ext3_debug("freed blocks "E3FSBLK" through "E3FSBLK"\n", o_blocks_count,
1074 o_blocks_count + add);
1075 if ((err = ext3_journal_stop(handle)))
1076 goto exit_put;
1077 if (test_opt(sb, DEBUG))
1078 printk(KERN_DEBUG "EXT3-fs: extended group to %u blocks\n",
1079 le32_to_cpu(es->s_blocks_count));
1080 update_backups(sb, EXT3_SB(sb)->s_sbh->b_blocknr, (char *)es,
1081 sizeof(struct ext3_super_block));
1082 exit_put:
1083 return err;
1084 } /* ext3_group_extend */