drivers/usb/serial/belkin_sa.h

   1 /*
   2  * Definitions for Belkin USB Serial Adapter Driver
   3  *
   4  *  Copyright (C) 2000
   5  *      William Greathouse (wgreathouse@smva.com)
   6  *
   7  *  This program is largely derived from work by the linux-usb group
   8  *  and associated source files.  Please see the usb/serial files for
   9  *  individual credits and copyrights.
  10  *
  11  *      This program is free software; you can redistribute it and/or modify
  12  *      it under the terms of the GNU General Public License as published by
  13  *      the Free Software Foundation; either version 2 of the License, or
  14  *      (at your option) any later version.
  15  *
  16  * See Documentation/usb/usb-serial.txt for more information on using this
  17  * driver
  18  *
  19  * 12-Mar-2001 gkh
  20  *      Added GoHubs GO-COM232 device id.
  21  *
  22  * 06-Nov-2000 gkh
  23  *      Added old Belkin and Peracom device ids, which this driver supports
  24  *
  25  * 12-Oct-2000 William Greathouse
  26  *    First cut at supporting Belkin USB Serial Adapter F5U103
  27  *    I did not have a copy of the original work to support this
  28  *    adapter, so pardon any stupid mistakes.  All of the information
  29  *    I am using to write this driver was acquired by using a modified
  30  *    UsbSnoop on Windows2000.
  31  *
  32  */
  33
  34 #ifndef __LINUX_USB_SERIAL_BSA_H
  35 #define __LINUX_USB_SERIAL_BSA_H
  36
  37 #define BELKIN_DOCKSTATION_VID  0x050d  /* Vendor Id */
  38 #define BELKIN_DOCKSTATION_PID  0x1203  /* Product Id */
  39
  40 #define BELKIN_SA_VID   0x050d  /* Vendor Id */
  41 #define BELKIN_SA_PID   0x0103  /* Product Id */
  42
  43 #define BELKIN_OLD_VID  0x056c  /* Belkin's "old" vendor id */
  44 #define BELKIN_OLD_PID  0x8007  /* Belkin's "old" single port serial converter's id */
  45
  46 #define PERACOM_VID     0x0565  /* Peracom's vendor id */
  47 #define PERACOM_PID     0x0001  /* Peracom's single port serial converter's id */
  48
  49 #define GOHUBS_VID      0x0921  /* GoHubs vendor id */
  50 #define GOHUBS_PID      0x1000  /* GoHubs single port serial converter's id (identical to the Peracom device) */
  51 #define HANDYLINK_PID   0x1200  /* HandyLink USB's id (identical to the Peracom device) */
  52
  53 /* Vendor Request Interface */
  54 #define BELKIN_SA_SET_BAUDRATE_REQUEST  0  /* Set baud rate */
  55 #define BELKIN_SA_SET_STOP_BITS_REQUEST 1  /* Set stop bits (1,2) */
  56 #define BELKIN_SA_SET_DATA_BITS_REQUEST 2  /* Set data bits (5,6,7,8) */
  57 #define BELKIN_SA_SET_PARITY_REQUEST    3  /* Set parity (None, Even, Odd) */
  58
  59 #define BELKIN_SA_SET_DTR_REQUEST       10 /* Set DTR state */
  60 #define BELKIN_SA_SET_RTS_REQUEST       11 /* Set RTS state */
  61 #define BELKIN_SA_SET_BREAK_REQUEST     12 /* Set BREAK state */
  62
  63 #define BELKIN_SA_SET_FLOW_CTRL_REQUEST 16 /* Set flow control mode */
  64
  65
  66 #ifdef WHEN_I_LEARN_THIS
  67 #define BELKIN_SA_SET_MAGIC_REQUEST     17 /* I don't know, possibly flush */
  68                                            /* (always in Wininit sequence before flow control) */
  69 #define BELKIN_SA_RESET                 xx /* Reset the port */
  70 #define BELKIN_SA_GET_MODEM_STATUS      xx /* Force return of modem status register */
  71 #endif
  72
  73 #define BELKIN_SA_SET_REQUEST_TYPE      0x40
  74
  75 #define BELKIN_SA_BAUD(b)               (230400/b)
  76
  77 #define BELKIN_SA_STOP_BITS(b)          (b-1)
  78
  79 #define BELKIN_SA_DATA_BITS(b)          (b-5)
  80
  81 #define BELKIN_SA_PARITY_NONE           0
  82 #define BELKIN_SA_PARITY_EVEN           1
  83 #define BELKIN_SA_PARITY_ODD            2
  84 #define BELKIN_SA_PARITY_MARK           3
  85 #define BELKIN_SA_PARITY_SPACE          4
  86
  87 #define BELKIN_SA_FLOW_NONE             0x0000  /* No flow control */
  88 #define BELKIN_SA_FLOW_OCTS             0x0001  /* use CTS input to throttle output */
  89 #define BELKIN_SA_FLOW_ODSR             0x0002  /* use DSR input to throttle output */
  90 #define BELKIN_SA_FLOW_IDSR             0x0004  /* use DSR input to enable receive */
  91 #define BELKIN_SA_FLOW_IDTR             0x0008  /* use DTR output for input flow control */
  92 #define BELKIN_SA_FLOW_IRTS             0x0010  /* use RTS output for input flow control */
  93 #define BELKIN_SA_FLOW_ORTS             0x0020  /* use RTS to indicate data available to send */
  94 #define BELKIN_SA_FLOW_ERRSUB           0x0040  /* ???? guess ???? substitute inline errors */
  95 #define BELKIN_SA_FLOW_OXON             0x0080  /* use XON/XOFF for output flow control */
  96 #define BELKIN_SA_FLOW_IXON             0x0100  /* use XON/XOFF for input flow control */
  97
  98 /*
  99  * It seems that the interrupt pipe is closely modelled after the
 100  * 16550 register layout.  This is probably because the adapter can
 101  * be used in a "DOS" environment to simulate a standard hardware port.
 102  */
 103 #define BELKIN_SA_LSR_INDEX             2       /*     Line Status Register */
 104 #define BELKIN_SA_LSR_RDR               0x01    /* receive data ready */
 105 #define BELKIN_SA_LSR_OE                0x02    /* overrun error */
 106 #define BELKIN_SA_LSR_PE                0x04    /* parity error */
 107 #define BELKIN_SA_LSR_FE                0x08    /* framing error */
 108 #define BELKIN_SA_LSR_BI                0x10    /* break indicator */
 109 #define BELKIN_SA_LSR_THE               0x20    /* tx holding register empty */
 110 #define BELKIN_SA_LSR_TE                0x40    /* transmit register empty */
 111 #define BELKIN_SA_LSR_ERR               0x80    /* OE | PE | FE | BI */
 112
 113 #define BELKIN_SA_MSR_INDEX             3       /*     Modem Status Register */
 114 #define BELKIN_SA_MSR_DCTS              0x01    /* Delta CTS */
 115 #define BELKIN_SA_MSR_DDSR              0x02    /* Delta DSR */
 116 #define BELKIN_SA_MSR_DRI               0x04    /* Delta RI */
 117 #define BELKIN_SA_MSR_DCD               0x08    /* Delta CD */
 118 #define BELKIN_SA_MSR_CTS               0x10    /* Current CTS */
 119 #define BELKIN_SA_MSR_DSR               0x20    /* Current DSR */
 120 #define BELKIN_SA_MSR_RI                0x40    /* Current RI */
 121 #define BELKIN_SA_MSR_CD                0x80    /* Current CD */
 122
 123 #endif /* __LINUX_USB_SERIAL_BSA_H */
 124