?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
bna: remove oper_state_cbfn from struct bna_rxf
[linux/fpc-iii.git] / drivers / usb / serial / kl5kusb105.c
blobe020ad28a00c9d566d24143175cb50baf1e07a90
1 /*
2 * KLSI KL5KUSB105 chip RS232 converter driver
3 *
4 * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
5 * Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * All information about the device was acquired using SniffUSB ans snoopUSB
13 * on Windows98.
14 * It was written out of frustration with the PalmConnect USB Serial adapter
15 * sold by Palm Inc.
16 * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
17 * information that was not already available.
18 *
19 * It seems that KLSI bought some silicon-design information from ScanLogic,
20 * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
21 * KLSI has firmware available for their devices; it is probable that the
22 * firmware differs from that used by KLSI in their products. If you have an
23 * original KLSI device and can provide some information on it, I would be
24 * most interested in adding support for it here. If you have any information
25 * on the protocol used (or find errors in my reverse-engineered stuff), please
26 * let me know.
27 *
28 * The code was only tested with a PalmConnect USB adapter; if you
29 * are adventurous, try it with any KLSI-based device and let me know how it
30 * breaks so that I can fix it!
31 */
32
33 /* TODO:
34 * check modem line signals
35 * implement handshaking or decide that we do not support it
36 */
37
38 #include <linux/kernel.h>
39 #include <linux/errno.h>
40 #include <linux/slab.h>
41 #include <linux/tty.h>
42 #include <linux/tty_driver.h>
43 #include <linux/tty_flip.h>
44 #include <linux/module.h>
45 #include <linux/uaccess.h>
46 #include <asm/unaligned.h>
47 #include <linux/usb.h>
48 #include <linux/usb/serial.h>
49 #include "kl5kusb105.h"
50
51 #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
52 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
53
54
55 /*
56 * Function prototypes
57 */
58 static int klsi_105_port_probe(struct usb_serial_port *port);
59 static int klsi_105_port_remove(struct usb_serial_port *port);
60 static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
61 static void klsi_105_close(struct usb_serial_port *port);
62 static void klsi_105_set_termios(struct tty_struct *tty,
63 struct usb_serial_port *port, struct ktermios *old);
64 static int klsi_105_tiocmget(struct tty_struct *tty);
65 static void klsi_105_process_read_urb(struct urb *urb);
66 static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
67 void *dest, size_t size);
68
69 /*
70 * All of the device info needed for the KLSI converters.
71 */
72 static const struct usb_device_id id_table[] = {
73 { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
74 { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
75 { } /* Terminating entry */
76 };
77
78 MODULE_DEVICE_TABLE(usb, id_table);
79
80 static struct usb_serial_driver kl5kusb105d_device = {
81 .driver = {
82 .owner = THIS_MODULE,
83 .name = "kl5kusb105d",
84 },
85 .description = "KL5KUSB105D / PalmConnect",
86 .id_table = id_table,
87 .num_ports = 1,
88 .bulk_out_size = 64,
89 .open = klsi_105_open,
90 .close = klsi_105_close,
91 .set_termios = klsi_105_set_termios,
92 /*.break_ctl = klsi_105_break_ctl,*/
93 .tiocmget = klsi_105_tiocmget,
94 .port_probe = klsi_105_port_probe,
95 .port_remove = klsi_105_port_remove,
96 .throttle = usb_serial_generic_throttle,
97 .unthrottle = usb_serial_generic_unthrottle,
98 .process_read_urb = klsi_105_process_read_urb,
99 .prepare_write_buffer = klsi_105_prepare_write_buffer,
100 };
101
102 static struct usb_serial_driver * const serial_drivers[] = {
103 &kl5kusb105d_device, NULL
104 };
105
106 struct klsi_105_port_settings {
107 __u8 pktlen; /* always 5, it seems */
108 __u8 baudrate;
109 __u8 databits;
110 __u8 unknown1;
111 __u8 unknown2;
112 } __attribute__ ((packed));
113
114 struct klsi_105_private {
115 struct klsi_105_port_settings cfg;
116 struct ktermios termios;
117 unsigned long line_state; /* modem line settings */
118 spinlock_t lock;
119 };
120
121
122 /*
123 * Handle vendor specific USB requests
124 */
125
126
127 #define KLSI_TIMEOUT 5000 /* default urb timeout */
128
129 static int klsi_105_chg_port_settings(struct usb_serial_port *port,
130 struct klsi_105_port_settings *settings)
131 {
132 int rc;
133
134 rc = usb_control_msg(port->serial->dev,
135 usb_sndctrlpipe(port->serial->dev, 0),
136 KL5KUSB105A_SIO_SET_DATA,
137 USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
138 0, /* value */
139 0, /* index */
140 settings,
141 sizeof(struct klsi_105_port_settings),
142 KLSI_TIMEOUT);
143 if (rc < 0)
144 dev_err(&port->dev,
145 "Change port settings failed (error = %d)\n", rc);
146 dev_info(&port->serial->dev->dev,
147 "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
148 settings->pktlen, settings->baudrate, settings->databits,
149 settings->unknown1, settings->unknown2);
150 return rc;
151 }
152
153 /* translate a 16-bit status value from the device to linux's TIO bits */
154 static unsigned long klsi_105_status2linestate(const __u16 status)
155 {
156 unsigned long res = 0;
157
158 res = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0)
159 | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0)
160 ;
161
162 return res;
163 }
164
165 /*
166 * Read line control via vendor command and return result through
167 * *line_state_p
168 */
169 /* It seems that the status buffer has always only 2 bytes length */
170 #define KLSI_STATUSBUF_LEN 2
171 static int klsi_105_get_line_state(struct usb_serial_port *port,
172 unsigned long *line_state_p)
173 {
174 int rc;
175 u8 *status_buf;
176 __u16 status;
177
178 dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
179
180 status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
181 if (!status_buf)
182 return -ENOMEM;
183
184 status_buf[0] = 0xff;
185 status_buf[1] = 0xff;
186 rc = usb_control_msg(port->serial->dev,
187 usb_rcvctrlpipe(port->serial->dev, 0),
188 KL5KUSB105A_SIO_POLL,
189 USB_TYPE_VENDOR | USB_DIR_IN,
190 0, /* value */
191 0, /* index */
192 status_buf, KLSI_STATUSBUF_LEN,
193 10000
194 );
195 if (rc < 0)
196 dev_err(&port->dev, "Reading line status failed (error = %d)\n",
197 rc);
198 else {
199 status = get_unaligned_le16(status_buf);
200
201 dev_info(&port->serial->dev->dev, "read status %x %x\n",
202 status_buf[0], status_buf[1]);
203
204 *line_state_p = klsi_105_status2linestate(status);
205 }
206
207 kfree(status_buf);
208 return rc;
209 }
210
211
212 /*
213 * Driver's tty interface functions
214 */
215
216 static int klsi_105_port_probe(struct usb_serial_port *port)
217 {
218 struct klsi_105_private *priv;
219
220 priv = kmalloc(sizeof(*priv), GFP_KERNEL);
221 if (!priv)
222 return -ENOMEM;
223
224 /* set initial values for control structures */
225 priv->cfg.pktlen = 5;
226 priv->cfg.baudrate = kl5kusb105a_sio_b9600;
227 priv->cfg.databits = kl5kusb105a_dtb_8;
228 priv->cfg.unknown1 = 0;
229 priv->cfg.unknown2 = 1;
230
231 priv->line_state = 0;
232
233 spin_lock_init(&priv->lock);
234
235 /* priv->termios is left uninitialized until port opening */
236
237 usb_set_serial_port_data(port, priv);
238
239 return 0;
240 }
241
242 static int klsi_105_port_remove(struct usb_serial_port *port)
243 {
244 struct klsi_105_private *priv;
245
246 priv = usb_get_serial_port_data(port);
247 kfree(priv);
248
249 return 0;
250 }
251
252 static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
253 {
254 struct klsi_105_private *priv = usb_get_serial_port_data(port);
255 int retval = 0;
256 int rc;
257 int i;
258 unsigned long line_state;
259 struct klsi_105_port_settings *cfg;
260 unsigned long flags;
261
262 /* Do a defined restart:
263 * Set up sane default baud rate and send the 'READ_ON'
264 * vendor command.
265 * FIXME: set modem line control (how?)
266 * Then read the modem line control and store values in
267 * priv->line_state.
268 */
269 cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
270 if (!cfg)
271 return -ENOMEM;
272
273 cfg->pktlen = 5;
274 cfg->baudrate = kl5kusb105a_sio_b9600;
275 cfg->databits = kl5kusb105a_dtb_8;
276 cfg->unknown1 = 0;
277 cfg->unknown2 = 1;
278 klsi_105_chg_port_settings(port, cfg);
279
280 /* set up termios structure */
281 spin_lock_irqsave(&priv->lock, flags);
282 priv->termios.c_iflag = tty->termios.c_iflag;
283 priv->termios.c_oflag = tty->termios.c_oflag;
284 priv->termios.c_cflag = tty->termios.c_cflag;
285 priv->termios.c_lflag = tty->termios.c_lflag;
286 for (i = 0; i < NCCS; i++)
287 priv->termios.c_cc[i] = tty->termios.c_cc[i];
288 priv->cfg.pktlen = cfg->pktlen;
289 priv->cfg.baudrate = cfg->baudrate;
290 priv->cfg.databits = cfg->databits;
291 priv->cfg.unknown1 = cfg->unknown1;
292 priv->cfg.unknown2 = cfg->unknown2;
293 spin_unlock_irqrestore(&priv->lock, flags);
294
295 /* READ_ON and urb submission */
296 rc = usb_serial_generic_open(tty, port);
297 if (rc) {
298 retval = rc;
299 goto exit;
300 }
301
302 rc = usb_control_msg(port->serial->dev,
303 usb_sndctrlpipe(port->serial->dev, 0),
304 KL5KUSB105A_SIO_CONFIGURE,
305 USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
306 KL5KUSB105A_SIO_CONFIGURE_READ_ON,
307 0, /* index */
308 NULL,
309 0,
310 KLSI_TIMEOUT);
311 if (rc < 0) {
312 dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
313 retval = rc;
314 } else
315 dev_dbg(&port->dev, "%s - enabled reading\n", __func__);
316
317 rc = klsi_105_get_line_state(port, &line_state);
318 if (rc >= 0) {
319 spin_lock_irqsave(&priv->lock, flags);
320 priv->line_state = line_state;
321 spin_unlock_irqrestore(&priv->lock, flags);
322 dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state);
323 retval = 0;
324 } else
325 retval = rc;
326
327 exit:
328 kfree(cfg);
329 return retval;
330 }
331
332 static void klsi_105_close(struct usb_serial_port *port)
333 {
334 int rc;
335
336 /* send READ_OFF */
337 rc = usb_control_msg(port->serial->dev,
338 usb_sndctrlpipe(port->serial->dev, 0),
339 KL5KUSB105A_SIO_CONFIGURE,
340 USB_TYPE_VENDOR | USB_DIR_OUT,
341 KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
342 0, /* index */
343 NULL, 0,
344 KLSI_TIMEOUT);
345 if (rc < 0)
346 dev_err(&port->dev, "failed to disable read: %d\n", rc);
347
348 /* shutdown our bulk reads and writes */
349 usb_serial_generic_close(port);
350 }
351
352 /* We need to write a complete 64-byte data block and encode the
353 * number actually sent in the first double-byte, LSB-order. That
354 * leaves at most 62 bytes of payload.
355 */
356 #define KLSI_HDR_LEN 2
357 static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
358 void *dest, size_t size)
359 {
360 unsigned char *buf = dest;
361 int count;
362
363 count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size,
364 &port->lock);
365 put_unaligned_le16(count, buf);
366
367 return count + KLSI_HDR_LEN;
368 }
369
370 /* The data received is preceded by a length double-byte in LSB-first order.
371 */
372 static void klsi_105_process_read_urb(struct urb *urb)
373 {
374 struct usb_serial_port *port = urb->context;
375 unsigned char *data = urb->transfer_buffer;
376 unsigned len;
377
378 /* empty urbs seem to happen, we ignore them */
379 if (!urb->actual_length)
380 return;
381
382 if (urb->actual_length <= KLSI_HDR_LEN) {
383 dev_dbg(&port->dev, "%s - malformed packet\n", __func__);
384 return;
385 }
386
387 len = get_unaligned_le16(data);
388 if (len > urb->actual_length - KLSI_HDR_LEN) {
389 dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__);
390 len = urb->actual_length - KLSI_HDR_LEN;
391 }
392
393 tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len);
394 tty_flip_buffer_push(&port->port);
395 }
396
397 static void klsi_105_set_termios(struct tty_struct *tty,
398 struct usb_serial_port *port,
399 struct ktermios *old_termios)
400 {
401 struct klsi_105_private *priv = usb_get_serial_port_data(port);
402 struct device *dev = &port->dev;
403 unsigned int iflag = tty->termios.c_iflag;
404 unsigned int old_iflag = old_termios->c_iflag;
405 unsigned int cflag = tty->termios.c_cflag;
406 unsigned int old_cflag = old_termios->c_cflag;
407 struct klsi_105_port_settings *cfg;
408 unsigned long flags;
409 speed_t baud;
410
411 cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
412 if (!cfg)
413 return;
414
415 /* lock while we are modifying the settings */
416 spin_lock_irqsave(&priv->lock, flags);
417
418 /*
419 * Update baud rate
420 */
421 baud = tty_get_baud_rate(tty);
422
423 if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
424 /* reassert DTR and (maybe) RTS on transition from B0 */
425 if ((old_cflag & CBAUD) == B0) {
426 dev_dbg(dev, "%s: baud was B0\n", __func__);
427 #if 0
428 priv->control_state |= TIOCM_DTR;
429 /* don't set RTS if using hardware flow control */
430 if (!(old_cflag & CRTSCTS))
431 priv->control_state |= TIOCM_RTS;
432 mct_u232_set_modem_ctrl(serial, priv->control_state);
433 #endif
434 }
435 }
436 switch (baud) {
437 case 0: /* handled below */
438 break;
439 case 1200:
440 priv->cfg.baudrate = kl5kusb105a_sio_b1200;
441 break;
442 case 2400:
443 priv->cfg.baudrate = kl5kusb105a_sio_b2400;
444 break;
445 case 4800:
446 priv->cfg.baudrate = kl5kusb105a_sio_b4800;
447 break;
448 case 9600:
449 priv->cfg.baudrate = kl5kusb105a_sio_b9600;
450 break;
451 case 19200:
452 priv->cfg.baudrate = kl5kusb105a_sio_b19200;
453 break;
454 case 38400:
455 priv->cfg.baudrate = kl5kusb105a_sio_b38400;
456 break;
457 case 57600:
458 priv->cfg.baudrate = kl5kusb105a_sio_b57600;
459 break;
460 case 115200:
461 priv->cfg.baudrate = kl5kusb105a_sio_b115200;
462 break;
463 default:
464 dev_dbg(dev, "unsupported baudrate, using 9600\n");
465 priv->cfg.baudrate = kl5kusb105a_sio_b9600;
466 baud = 9600;
467 break;
468 }
469 if ((cflag & CBAUD) == B0) {
470 dev_dbg(dev, "%s: baud is B0\n", __func__);
471 /* Drop RTS and DTR */
472 /* maybe this should be simulated by sending read
473 * disable and read enable messages?
474 */
475 ;
476 #if 0
477 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
478 mct_u232_set_modem_ctrl(serial, priv->control_state);
479 #endif
480 }
481 tty_encode_baud_rate(tty, baud, baud);
482
483 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
484 /* set the number of data bits */
485 switch (cflag & CSIZE) {
486 case CS5:
487 dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__);
488 spin_unlock_irqrestore(&priv->lock, flags);
489 goto err;
490 case CS6:
491 dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__);
492 spin_unlock_irqrestore(&priv->lock, flags);
493 goto err;
494 case CS7:
495 priv->cfg.databits = kl5kusb105a_dtb_7;
496 break;
497 case CS8:
498 priv->cfg.databits = kl5kusb105a_dtb_8;
499 break;
500 default:
501 dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n");
502 priv->cfg.databits = kl5kusb105a_dtb_8;
503 break;
504 }
505 }
506
507 /*
508 * Update line control register (LCR)
509 */
510 if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
511 || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
512 /* Not currently supported */
513 tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
514 #if 0
515 priv->last_lcr = 0;
516
517 /* set the parity */
518 if (cflag & PARENB)
519 priv->last_lcr |= (cflag & PARODD) ?
520 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
521 else
522 priv->last_lcr |= MCT_U232_PARITY_NONE;
523
524 /* set the number of stop bits */
525 priv->last_lcr |= (cflag & CSTOPB) ?
526 MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
527
528 mct_u232_set_line_ctrl(serial, priv->last_lcr);
529 #endif
530 ;
531 }
532 /*
533 * Set flow control: well, I do not really now how to handle DTR/RTS.
534 * Just do what we have seen with SniffUSB on Win98.
535 */
536 if ((iflag & IXOFF) != (old_iflag & IXOFF)
537 || (iflag & IXON) != (old_iflag & IXON)
538 || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
539 /* Not currently supported */
540 tty->termios.c_cflag &= ~CRTSCTS;
541 /* Drop DTR/RTS if no flow control otherwise assert */
542 #if 0
543 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
544 priv->control_state |= TIOCM_DTR | TIOCM_RTS;
545 else
546 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
547 mct_u232_set_modem_ctrl(serial, priv->control_state);
548 #endif
549 ;
550 }
551 memcpy(cfg, &priv->cfg, sizeof(*cfg));
552 spin_unlock_irqrestore(&priv->lock, flags);
553
554 /* now commit changes to device */
555 klsi_105_chg_port_settings(port, cfg);
556 err:
557 kfree(cfg);
558 }
559
560 #if 0
561 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
562 {
563 struct usb_serial_port *port = tty->driver_data;
564 struct usb_serial *serial = port->serial;
565 struct mct_u232_private *priv =
566 (struct mct_u232_private *)port->private;
567 unsigned char lcr = priv->last_lcr;
568
569 dev_dbg(&port->dev, "%s - state=%d\n", __func__, break_state);
570
571 /* LOCKING */
572 if (break_state)
573 lcr |= MCT_U232_SET_BREAK;
574
575 mct_u232_set_line_ctrl(serial, lcr);
576 }
577 #endif
578
579 static int klsi_105_tiocmget(struct tty_struct *tty)
580 {
581 struct usb_serial_port *port = tty->driver_data;
582 struct klsi_105_private *priv = usb_get_serial_port_data(port);
583 unsigned long flags;
584 int rc;
585 unsigned long line_state;
586
587 rc = klsi_105_get_line_state(port, &line_state);
588 if (rc < 0) {
589 dev_err(&port->dev,
590 "Reading line control failed (error = %d)\n", rc);
591 /* better return value? EAGAIN? */
592 return rc;
593 }
594
595 spin_lock_irqsave(&priv->lock, flags);
596 priv->line_state = line_state;
597 spin_unlock_irqrestore(&priv->lock, flags);
598 dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state);
599 return (int)line_state;
600 }
601
602 module_usb_serial_driver(serial_drivers, id_table);
603
604 MODULE_AUTHOR(DRIVER_AUTHOR);
605 MODULE_DESCRIPTION(DRIVER_DESC);
606 MODULE_LICENSE("GPL");
Linux with added FPC-III support