?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sched/deadline: Don't balance during wakeup if wakee is pinned
[linux/fpc-iii.git] / drivers / rtc / rtc-ds1307.c
blobbb43cf703efc590bf40ba62a3de52aeea64d71b4
1 /*
2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
3 *
4 * Copyright (C) 2005 James Chapman (ds1337 core)
5 * Copyright (C) 2006 David Brownell
6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/slab.h>
17 #include <linux/i2c.h>
18 #include <linux/string.h>
19 #include <linux/rtc.h>
20 #include <linux/bcd.h>
21 #include <linux/rtc/ds1307.h>
22
23 /*
24 * We can't determine type by probing, but if we expect pre-Linux code
25 * to have set the chip up as a clock (turning on the oscillator and
26 * setting the date and time), Linux can ignore the non-clock features.
27 * That's a natural job for a factory or repair bench.
28 */
29 enum ds_type {
30 ds_1307,
31 ds_1337,
32 ds_1338,
33 ds_1339,
34 ds_1340,
35 ds_1388,
36 ds_3231,
37 m41t00,
38 mcp7941x,
39 rx_8025,
40 last_ds_type /* always last */
41 /* rs5c372 too? different address... */
42 };
43
44
45 /* RTC registers don't differ much, except for the century flag */
46 #define DS1307_REG_SECS 0x00 /* 00-59 */
47 # define DS1307_BIT_CH 0x80
48 # define DS1340_BIT_nEOSC 0x80
49 # define MCP7941X_BIT_ST 0x80
50 #define DS1307_REG_MIN 0x01 /* 00-59 */
51 #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
52 # define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
53 # define DS1307_BIT_PM 0x20 /* in REG_HOUR */
54 # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
55 # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
56 #define DS1307_REG_WDAY 0x03 /* 01-07 */
57 # define MCP7941X_BIT_VBATEN 0x08
58 #define DS1307_REG_MDAY 0x04 /* 01-31 */
59 #define DS1307_REG_MONTH 0x05 /* 01-12 */
60 # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
61 #define DS1307_REG_YEAR 0x06 /* 00-99 */
62
63 /*
64 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
65 * start at 7, and they differ a LOT. Only control and status matter for
66 * basic RTC date and time functionality; be careful using them.
67 */
68 #define DS1307_REG_CONTROL 0x07 /* or ds1338 */
69 # define DS1307_BIT_OUT 0x80
70 # define DS1338_BIT_OSF 0x20
71 # define DS1307_BIT_SQWE 0x10
72 # define DS1307_BIT_RS1 0x02
73 # define DS1307_BIT_RS0 0x01
74 #define DS1337_REG_CONTROL 0x0e
75 # define DS1337_BIT_nEOSC 0x80
76 # define DS1339_BIT_BBSQI 0x20
77 # define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
78 # define DS1337_BIT_RS2 0x10
79 # define DS1337_BIT_RS1 0x08
80 # define DS1337_BIT_INTCN 0x04
81 # define DS1337_BIT_A2IE 0x02
82 # define DS1337_BIT_A1IE 0x01
83 #define DS1340_REG_CONTROL 0x07
84 # define DS1340_BIT_OUT 0x80
85 # define DS1340_BIT_FT 0x40
86 # define DS1340_BIT_CALIB_SIGN 0x20
87 # define DS1340_M_CALIBRATION 0x1f
88 #define DS1340_REG_FLAG 0x09
89 # define DS1340_BIT_OSF 0x80
90 #define DS1337_REG_STATUS 0x0f
91 # define DS1337_BIT_OSF 0x80
92 # define DS1337_BIT_A2I 0x02
93 # define DS1337_BIT_A1I 0x01
94 #define DS1339_REG_ALARM1_SECS 0x07
95
96 #define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
97
98 #define RX8025_REG_CTRL1 0x0e
99 # define RX8025_BIT_2412 0x20
100 #define RX8025_REG_CTRL2 0x0f
101 # define RX8025_BIT_PON 0x10
102 # define RX8025_BIT_VDET 0x40
103 # define RX8025_BIT_XST 0x20
104
105
106 struct ds1307 {
107 u8 offset; /* register's offset */
108 u8 regs[11];
109 u16 nvram_offset;
110 struct bin_attribute *nvram;
111 enum ds_type type;
112 unsigned long flags;
113 #define HAS_NVRAM 0 /* bit 0 == sysfs file active */
114 #define HAS_ALARM 1 /* bit 1 == irq claimed */
115 struct i2c_client *client;
116 struct rtc_device *rtc;
117 struct work_struct work;
118 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
119 u8 length, u8 *values);
120 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
121 u8 length, const u8 *values);
122 };
123
124 struct chip_desc {
125 unsigned alarm:1;
126 u16 nvram_offset;
127 u16 nvram_size;
128 u16 trickle_charger_reg;
129 u8 trickle_charger_setup;
130 u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
131 };
132
133 static u8 do_trickle_setup_ds1339(struct i2c_client *,
134 uint32_t ohms, bool diode);
135
136 static struct chip_desc chips[last_ds_type] = {
137 [ds_1307] = {
138 .nvram_offset = 8,
139 .nvram_size = 56,
140 },
141 [ds_1337] = {
142 .alarm = 1,
143 },
144 [ds_1338] = {
145 .nvram_offset = 8,
146 .nvram_size = 56,
147 },
148 [ds_1339] = {
149 .alarm = 1,
150 .trickle_charger_reg = 0x10,
151 .do_trickle_setup = &do_trickle_setup_ds1339,
152 },
153 [ds_1340] = {
154 .trickle_charger_reg = 0x08,
155 },
156 [ds_1388] = {
157 .trickle_charger_reg = 0x0a,
158 },
159 [ds_3231] = {
160 .alarm = 1,
161 },
162 [mcp7941x] = {
163 .alarm = 1,
164 /* this is battery backed SRAM */
165 .nvram_offset = 0x20,
166 .nvram_size = 0x40,
167 },
168 };
169
170 static const struct i2c_device_id ds1307_id[] = {
171 { "ds1307", ds_1307 },
172 { "ds1337", ds_1337 },
173 { "ds1338", ds_1338 },
174 { "ds1339", ds_1339 },
175 { "ds1388", ds_1388 },
176 { "ds1340", ds_1340 },
177 { "ds3231", ds_3231 },
178 { "m41t00", m41t00 },
179 { "mcp7941x", mcp7941x },
180 { "pt7c4338", ds_1307 },
181 { "rx8025", rx_8025 },
182 { }
183 };
184 MODULE_DEVICE_TABLE(i2c, ds1307_id);
185
186 /*----------------------------------------------------------------------*/
187
188 #define BLOCK_DATA_MAX_TRIES 10
189
190 static s32 ds1307_read_block_data_once(const struct i2c_client *client,
191 u8 command, u8 length, u8 *values)
192 {
193 s32 i, data;
194
195 for (i = 0; i < length; i++) {
196 data = i2c_smbus_read_byte_data(client, command + i);
197 if (data < 0)
198 return data;
199 values[i] = data;
200 }
201 return i;
202 }
203
204 static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
205 u8 length, u8 *values)
206 {
207 u8 oldvalues[255];
208 s32 ret;
209 int tries = 0;
210
211 dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
212 ret = ds1307_read_block_data_once(client, command, length, values);
213 if (ret < 0)
214 return ret;
215 do {
216 if (++tries > BLOCK_DATA_MAX_TRIES) {
217 dev_err(&client->dev,
218 "ds1307_read_block_data failed\n");
219 return -EIO;
220 }
221 memcpy(oldvalues, values, length);
222 ret = ds1307_read_block_data_once(client, command, length,
223 values);
224 if (ret < 0)
225 return ret;
226 } while (memcmp(oldvalues, values, length));
227 return length;
228 }
229
230 static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
231 u8 length, const u8 *values)
232 {
233 u8 currvalues[255];
234 int tries = 0;
235
236 dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
237 do {
238 s32 i, ret;
239
240 if (++tries > BLOCK_DATA_MAX_TRIES) {
241 dev_err(&client->dev,
242 "ds1307_write_block_data failed\n");
243 return -EIO;
244 }
245 for (i = 0; i < length; i++) {
246 ret = i2c_smbus_write_byte_data(client, command + i,
247 values[i]);
248 if (ret < 0)
249 return ret;
250 }
251 ret = ds1307_read_block_data_once(client, command, length,
252 currvalues);
253 if (ret < 0)
254 return ret;
255 } while (memcmp(currvalues, values, length));
256 return length;
257 }
258
259 /*----------------------------------------------------------------------*/
260
261 /* These RTC devices are not designed to be connected to a SMbus adapter.
262 SMbus limits block operations length to 32 bytes, whereas it's not
263 limited on I2C buses. As a result, accesses may exceed 32 bytes;
264 in that case, split them into smaller blocks */
265
266 static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
267 u8 command, u8 length, const u8 *values)
268 {
269 u8 suboffset = 0;
270
271 if (length <= I2C_SMBUS_BLOCK_MAX)
272 return i2c_smbus_write_i2c_block_data(client,
273 command, length, values);
274
275 while (suboffset < length) {
276 s32 retval = i2c_smbus_write_i2c_block_data(client,
277 command + suboffset,
278 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
279 values + suboffset);
280 if (retval < 0)
281 return retval;
282
283 suboffset += I2C_SMBUS_BLOCK_MAX;
284 }
285 return length;
286 }
287
288 static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
289 u8 command, u8 length, u8 *values)
290 {
291 u8 suboffset = 0;
292
293 if (length <= I2C_SMBUS_BLOCK_MAX)
294 return i2c_smbus_read_i2c_block_data(client,
295 command, length, values);
296
297 while (suboffset < length) {
298 s32 retval = i2c_smbus_read_i2c_block_data(client,
299 command + suboffset,
300 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
301 values + suboffset);
302 if (retval < 0)
303 return retval;
304
305 suboffset += I2C_SMBUS_BLOCK_MAX;
306 }
307 return length;
308 }
309
310 /*----------------------------------------------------------------------*/
311
312 /*
313 * The IRQ logic includes a "real" handler running in IRQ context just
314 * long enough to schedule this workqueue entry. We need a task context
315 * to talk to the RTC, since I2C I/O calls require that; and disable the
316 * IRQ until we clear its status on the chip, so that this handler can
317 * work with any type of triggering (not just falling edge).
318 *
319 * The ds1337 and ds1339 both have two alarms, but we only use the first
320 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
321 * signal; ds1339 chips have only one alarm signal.
322 */
323 static void ds1307_work(struct work_struct *work)
324 {
325 struct ds1307 *ds1307;
326 struct i2c_client *client;
327 struct mutex *lock;
328 int stat, control;
329
330 ds1307 = container_of(work, struct ds1307, work);
331 client = ds1307->client;
332 lock = &ds1307->rtc->ops_lock;
333
334 mutex_lock(lock);
335 stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
336 if (stat < 0)
337 goto out;
338
339 if (stat & DS1337_BIT_A1I) {
340 stat &= ~DS1337_BIT_A1I;
341 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
342
343 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
344 if (control < 0)
345 goto out;
346
347 control &= ~DS1337_BIT_A1IE;
348 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
349
350 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
351 }
352
353 out:
354 if (test_bit(HAS_ALARM, &ds1307->flags))
355 enable_irq(client->irq);
356 mutex_unlock(lock);
357 }
358
359 static irqreturn_t ds1307_irq(int irq, void *dev_id)
360 {
361 struct i2c_client *client = dev_id;
362 struct ds1307 *ds1307 = i2c_get_clientdata(client);
363
364 disable_irq_nosync(irq);
365 schedule_work(&ds1307->work);
366 return IRQ_HANDLED;
367 }
368
369 /*----------------------------------------------------------------------*/
370
371 static int ds1307_get_time(struct device *dev, struct rtc_time *t)
372 {
373 struct ds1307 *ds1307 = dev_get_drvdata(dev);
374 int tmp;
375
376 /* read the RTC date and time registers all at once */
377 tmp = ds1307->read_block_data(ds1307->client,
378 ds1307->offset, 7, ds1307->regs);
379 if (tmp != 7) {
380 dev_err(dev, "%s error %d\n", "read", tmp);
381 return -EIO;
382 }
383
384 dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
385
386 t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
387 t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
388 tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
389 t->tm_hour = bcd2bin(tmp);
390 t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
391 t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
392 tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
393 t->tm_mon = bcd2bin(tmp) - 1;
394
395 /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
396 t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
397
398 dev_dbg(dev, "%s secs=%d, mins=%d, "
399 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
400 "read", t->tm_sec, t->tm_min,
401 t->tm_hour, t->tm_mday,
402 t->tm_mon, t->tm_year, t->tm_wday);
403
404 /* initial clock setting can be undefined */
405 return rtc_valid_tm(t);
406 }
407
408 static int ds1307_set_time(struct device *dev, struct rtc_time *t)
409 {
410 struct ds1307 *ds1307 = dev_get_drvdata(dev);
411 int result;
412 int tmp;
413 u8 *buf = ds1307->regs;
414
415 dev_dbg(dev, "%s secs=%d, mins=%d, "
416 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
417 "write", t->tm_sec, t->tm_min,
418 t->tm_hour, t->tm_mday,
419 t->tm_mon, t->tm_year, t->tm_wday);
420
421 buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
422 buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
423 buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
424 buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
425 buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
426 buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
427
428 /* assume 20YY not 19YY */
429 tmp = t->tm_year - 100;
430 buf[DS1307_REG_YEAR] = bin2bcd(tmp);
431
432 switch (ds1307->type) {
433 case ds_1337:
434 case ds_1339:
435 case ds_3231:
436 buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
437 break;
438 case ds_1340:
439 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
440 | DS1340_BIT_CENTURY;
441 break;
442 case mcp7941x:
443 /*
444 * these bits were cleared when preparing the date/time
445 * values and need to be set again before writing the
446 * buffer out to the device.
447 */
448 buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST;
449 buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN;
450 break;
451 default:
452 break;
453 }
454
455 dev_dbg(dev, "%s: %7ph\n", "write", buf);
456
457 result = ds1307->write_block_data(ds1307->client,
458 ds1307->offset, 7, buf);
459 if (result < 0) {
460 dev_err(dev, "%s error %d\n", "write", result);
461 return result;
462 }
463 return 0;
464 }
465
466 static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
467 {
468 struct i2c_client *client = to_i2c_client(dev);
469 struct ds1307 *ds1307 = i2c_get_clientdata(client);
470 int ret;
471
472 if (!test_bit(HAS_ALARM, &ds1307->flags))
473 return -EINVAL;
474
475 /* read all ALARM1, ALARM2, and status registers at once */
476 ret = ds1307->read_block_data(client,
477 DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
478 if (ret != 9) {
479 dev_err(dev, "%s error %d\n", "alarm read", ret);
480 return -EIO;
481 }
482
483 dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n",
484 "alarm read",
485 ds1307->regs[0], ds1307->regs[1],
486 ds1307->regs[2], ds1307->regs[3],
487 ds1307->regs[4], ds1307->regs[5],
488 ds1307->regs[6], ds1307->regs[7],
489 ds1307->regs[8]);
490
491 /*
492 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
493 * and that all four fields are checked matches
494 */
495 t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
496 t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
497 t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
498 t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
499 t->time.tm_mon = -1;
500 t->time.tm_year = -1;
501 t->time.tm_wday = -1;
502 t->time.tm_yday = -1;
503 t->time.tm_isdst = -1;
504
505 /* ... and status */
506 t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
507 t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
508
509 dev_dbg(dev, "%s secs=%d, mins=%d, "
510 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
511 "alarm read", t->time.tm_sec, t->time.tm_min,
512 t->time.tm_hour, t->time.tm_mday,
513 t->enabled, t->pending);
514
515 return 0;
516 }
517
518 static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
519 {
520 struct i2c_client *client = to_i2c_client(dev);
521 struct ds1307 *ds1307 = i2c_get_clientdata(client);
522 unsigned char *buf = ds1307->regs;
523 u8 control, status;
524 int ret;
525
526 if (!test_bit(HAS_ALARM, &ds1307->flags))
527 return -EINVAL;
528
529 dev_dbg(dev, "%s secs=%d, mins=%d, "
530 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
531 "alarm set", t->time.tm_sec, t->time.tm_min,
532 t->time.tm_hour, t->time.tm_mday,
533 t->enabled, t->pending);
534
535 /* read current status of both alarms and the chip */
536 ret = ds1307->read_block_data(client,
537 DS1339_REG_ALARM1_SECS, 9, buf);
538 if (ret != 9) {
539 dev_err(dev, "%s error %d\n", "alarm write", ret);
540 return -EIO;
541 }
542 control = ds1307->regs[7];
543 status = ds1307->regs[8];
544
545 dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n",
546 "alarm set (old status)",
547 ds1307->regs[0], ds1307->regs[1],
548 ds1307->regs[2], ds1307->regs[3],
549 ds1307->regs[4], ds1307->regs[5],
550 ds1307->regs[6], control, status);
551
552 /* set ALARM1, using 24 hour and day-of-month modes */
553 buf[0] = bin2bcd(t->time.tm_sec);
554 buf[1] = bin2bcd(t->time.tm_min);
555 buf[2] = bin2bcd(t->time.tm_hour);
556 buf[3] = bin2bcd(t->time.tm_mday);
557
558 /* set ALARM2 to non-garbage */
559 buf[4] = 0;
560 buf[5] = 0;
561 buf[6] = 0;
562
563 /* optionally enable ALARM1 */
564 buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
565 if (t->enabled) {
566 dev_dbg(dev, "alarm IRQ armed\n");
567 buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
568 }
569 buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
570
571 ret = ds1307->write_block_data(client,
572 DS1339_REG_ALARM1_SECS, 9, buf);
573 if (ret < 0) {
574 dev_err(dev, "can't set alarm time\n");
575 return ret;
576 }
577
578 return 0;
579 }
580
581 static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
582 {
583 struct i2c_client *client = to_i2c_client(dev);
584 struct ds1307 *ds1307 = i2c_get_clientdata(client);
585 int ret;
586
587 if (!test_bit(HAS_ALARM, &ds1307->flags))
588 return -ENOTTY;
589
590 ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
591 if (ret < 0)
592 return ret;
593
594 if (enabled)
595 ret |= DS1337_BIT_A1IE;
596 else
597 ret &= ~DS1337_BIT_A1IE;
598
599 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
600 if (ret < 0)
601 return ret;
602
603 return 0;
604 }
605
606 static const struct rtc_class_ops ds13xx_rtc_ops = {
607 .read_time = ds1307_get_time,
608 .set_time = ds1307_set_time,
609 .read_alarm = ds1337_read_alarm,
610 .set_alarm = ds1337_set_alarm,
611 .alarm_irq_enable = ds1307_alarm_irq_enable,
612 };
613
614 /*----------------------------------------------------------------------*/
615
616 /*
617 * Alarm support for mcp7941x devices.
618 */
619
620 #define MCP7941X_REG_CONTROL 0x07
621 # define MCP7941X_BIT_ALM0_EN 0x10
622 # define MCP7941X_BIT_ALM1_EN 0x20
623 #define MCP7941X_REG_ALARM0_BASE 0x0a
624 #define MCP7941X_REG_ALARM0_CTRL 0x0d
625 #define MCP7941X_REG_ALARM1_BASE 0x11
626 #define MCP7941X_REG_ALARM1_CTRL 0x14
627 # define MCP7941X_BIT_ALMX_IF (1 << 3)
628 # define MCP7941X_BIT_ALMX_C0 (1 << 4)
629 # define MCP7941X_BIT_ALMX_C1 (1 << 5)
630 # define MCP7941X_BIT_ALMX_C2 (1 << 6)
631 # define MCP7941X_BIT_ALMX_POL (1 << 7)
632 # define MCP7941X_MSK_ALMX_MATCH (MCP7941X_BIT_ALMX_C0 | \
633 MCP7941X_BIT_ALMX_C1 | \
634 MCP7941X_BIT_ALMX_C2)
635
636 static void mcp7941x_work(struct work_struct *work)
637 {
638 struct ds1307 *ds1307 = container_of(work, struct ds1307, work);
639 struct i2c_client *client = ds1307->client;
640 int reg, ret;
641
642 mutex_lock(&ds1307->rtc->ops_lock);
643
644 /* Check and clear alarm 0 interrupt flag. */
645 reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_ALARM0_CTRL);
646 if (reg < 0)
647 goto out;
648 if (!(reg & MCP7941X_BIT_ALMX_IF))
649 goto out;
650 reg &= ~MCP7941X_BIT_ALMX_IF;
651 ret = i2c_smbus_write_byte_data(client, MCP7941X_REG_ALARM0_CTRL, reg);
652 if (ret < 0)
653 goto out;
654
655 /* Disable alarm 0. */
656 reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_CONTROL);
657 if (reg < 0)
658 goto out;
659 reg &= ~MCP7941X_BIT_ALM0_EN;
660 ret = i2c_smbus_write_byte_data(client, MCP7941X_REG_CONTROL, reg);
661 if (ret < 0)
662 goto out;
663
664 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
665
666 out:
667 if (test_bit(HAS_ALARM, &ds1307->flags))
668 enable_irq(client->irq);
669 mutex_unlock(&ds1307->rtc->ops_lock);
670 }
671
672 static int mcp7941x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
673 {
674 struct i2c_client *client = to_i2c_client(dev);
675 struct ds1307 *ds1307 = i2c_get_clientdata(client);
676 u8 *regs = ds1307->regs;
677 int ret;
678
679 if (!test_bit(HAS_ALARM, &ds1307->flags))
680 return -EINVAL;
681
682 /* Read control and alarm 0 registers. */
683 ret = ds1307->read_block_data(client, MCP7941X_REG_CONTROL, 10, regs);
684 if (ret < 0)
685 return ret;
686
687 t->enabled = !!(regs[0] & MCP7941X_BIT_ALM0_EN);
688
689 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
690 t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
691 t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f);
692 t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f);
693 t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1;
694 t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f);
695 t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1;
696 t->time.tm_year = -1;
697 t->time.tm_yday = -1;
698 t->time.tm_isdst = -1;
699
700 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
701 "enabled=%d polarity=%d irq=%d match=%d\n", __func__,
702 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
703 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
704 !!(ds1307->regs[6] & MCP7941X_BIT_ALMX_POL),
705 !!(ds1307->regs[6] & MCP7941X_BIT_ALMX_IF),
706 (ds1307->regs[6] & MCP7941X_MSK_ALMX_MATCH) >> 4);
707
708 return 0;
709 }
710
711 static int mcp7941x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
712 {
713 struct i2c_client *client = to_i2c_client(dev);
714 struct ds1307 *ds1307 = i2c_get_clientdata(client);
715 unsigned char *regs = ds1307->regs;
716 int ret;
717
718 if (!test_bit(HAS_ALARM, &ds1307->flags))
719 return -EINVAL;
720
721 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
722 "enabled=%d pending=%d\n", __func__,
723 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
724 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
725 t->enabled, t->pending);
726
727 /* Read control and alarm 0 registers. */
728 ret = ds1307->read_block_data(client, MCP7941X_REG_CONTROL, 10, regs);
729 if (ret < 0)
730 return ret;
731
732 /* Set alarm 0, using 24-hour and day-of-month modes. */
733 regs[3] = bin2bcd(t->time.tm_sec);
734 regs[4] = bin2bcd(t->time.tm_min);
735 regs[5] = bin2bcd(t->time.tm_hour);
736 regs[6] = bin2bcd(t->time.tm_wday) + 1;
737 regs[7] = bin2bcd(t->time.tm_mday);
738 regs[8] = bin2bcd(t->time.tm_mon) + 1;
739
740 /* Clear the alarm 0 interrupt flag. */
741 regs[6] &= ~MCP7941X_BIT_ALMX_IF;
742 /* Set alarm match: second, minute, hour, day, date, month. */
743 regs[6] |= MCP7941X_MSK_ALMX_MATCH;
744
745 if (t->enabled)
746 regs[0] |= MCP7941X_BIT_ALM0_EN;
747 else
748 regs[0] &= ~MCP7941X_BIT_ALM0_EN;
749
750 ret = ds1307->write_block_data(client, MCP7941X_REG_CONTROL, 10, regs);
751 if (ret < 0)
752 return ret;
753
754 return 0;
755 }
756
757 static int mcp7941x_alarm_irq_enable(struct device *dev, unsigned int enabled)
758 {
759 struct i2c_client *client = to_i2c_client(dev);
760 struct ds1307 *ds1307 = i2c_get_clientdata(client);
761 int reg;
762
763 if (!test_bit(HAS_ALARM, &ds1307->flags))
764 return -EINVAL;
765
766 reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_CONTROL);
767 if (reg < 0)
768 return reg;
769
770 if (enabled)
771 reg |= MCP7941X_BIT_ALM0_EN;
772 else
773 reg &= ~MCP7941X_BIT_ALM0_EN;
774
775 return i2c_smbus_write_byte_data(client, MCP7941X_REG_CONTROL, reg);
776 }
777
778 static const struct rtc_class_ops mcp7941x_rtc_ops = {
779 .read_time = ds1307_get_time,
780 .set_time = ds1307_set_time,
781 .read_alarm = mcp7941x_read_alarm,
782 .set_alarm = mcp7941x_set_alarm,
783 .alarm_irq_enable = mcp7941x_alarm_irq_enable,
784 };
785
786 /*----------------------------------------------------------------------*/
787
788 static ssize_t
789 ds1307_nvram_read(struct file *filp, struct kobject *kobj,
790 struct bin_attribute *attr,
791 char *buf, loff_t off, size_t count)
792 {
793 struct i2c_client *client;
794 struct ds1307 *ds1307;
795 int result;
796
797 client = kobj_to_i2c_client(kobj);
798 ds1307 = i2c_get_clientdata(client);
799
800 if (unlikely(off >= ds1307->nvram->size))
801 return 0;
802 if ((off + count) > ds1307->nvram->size)
803 count = ds1307->nvram->size - off;
804 if (unlikely(!count))
805 return count;
806
807 result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
808 count, buf);
809 if (result < 0)
810 dev_err(&client->dev, "%s error %d\n", "nvram read", result);
811 return result;
812 }
813
814 static ssize_t
815 ds1307_nvram_write(struct file *filp, struct kobject *kobj,
816 struct bin_attribute *attr,
817 char *buf, loff_t off, size_t count)
818 {
819 struct i2c_client *client;
820 struct ds1307 *ds1307;
821 int result;
822
823 client = kobj_to_i2c_client(kobj);
824 ds1307 = i2c_get_clientdata(client);
825
826 if (unlikely(off >= ds1307->nvram->size))
827 return -EFBIG;
828 if ((off + count) > ds1307->nvram->size)
829 count = ds1307->nvram->size - off;
830 if (unlikely(!count))
831 return count;
832
833 result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
834 count, buf);
835 if (result < 0) {
836 dev_err(&client->dev, "%s error %d\n", "nvram write", result);
837 return result;
838 }
839 return count;
840 }
841
842
843 /*----------------------------------------------------------------------*/
844
845 static u8 do_trickle_setup_ds1339(struct i2c_client *client,
846 uint32_t ohms, bool diode)
847 {
848 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
849 DS1307_TRICKLE_CHARGER_NO_DIODE;
850
851 switch (ohms) {
852 case 250:
853 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
854 break;
855 case 2000:
856 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
857 break;
858 case 4000:
859 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
860 break;
861 default:
862 dev_warn(&client->dev,
863 "Unsupported ohm value %u in dt\n", ohms);
864 return 0;
865 }
866 return setup;
867 }
868
869 static void ds1307_trickle_of_init(struct i2c_client *client,
870 struct chip_desc *chip)
871 {
872 uint32_t ohms = 0;
873 bool diode = true;
874
875 if (!chip->do_trickle_setup)
876 goto out;
877 if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms" , &ohms))
878 goto out;
879 if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
880 diode = false;
881 chip->trickle_charger_setup = chip->do_trickle_setup(client,
882 ohms, diode);
883 out:
884 return;
885 }
886
887 static int ds1307_probe(struct i2c_client *client,
888 const struct i2c_device_id *id)
889 {
890 struct ds1307 *ds1307;
891 int err = -ENODEV;
892 int tmp;
893 struct chip_desc *chip = &chips[id->driver_data];
894 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
895 bool want_irq = false;
896 unsigned char *buf;
897 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
898 static const int bbsqi_bitpos[] = {
899 [ds_1337] = 0,
900 [ds_1339] = DS1339_BIT_BBSQI,
901 [ds_3231] = DS3231_BIT_BBSQW,
902 };
903 const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
904
905 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
906 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
907 return -EIO;
908
909 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
910 if (!ds1307)
911 return -ENOMEM;
912
913 i2c_set_clientdata(client, ds1307);
914
915 ds1307->client = client;
916 ds1307->type = id->driver_data;
917
918 if (!pdata && client->dev.of_node)
919 ds1307_trickle_of_init(client, chip);
920 else if (pdata && pdata->trickle_charger_setup)
921 chip->trickle_charger_setup = pdata->trickle_charger_setup;
922
923 if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
924 dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
925 DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
926 chip->trickle_charger_reg);
927 i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
928 DS13XX_TRICKLE_CHARGER_MAGIC |
929 chip->trickle_charger_setup);
930 }
931
932 buf = ds1307->regs;
933 if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
934 ds1307->read_block_data = ds1307_native_smbus_read_block_data;
935 ds1307->write_block_data = ds1307_native_smbus_write_block_data;
936 } else {
937 ds1307->read_block_data = ds1307_read_block_data;
938 ds1307->write_block_data = ds1307_write_block_data;
939 }
940
941 switch (ds1307->type) {
942 case ds_1337:
943 case ds_1339:
944 case ds_3231:
945 /* get registers that the "rtc" read below won't read... */
946 tmp = ds1307->read_block_data(ds1307->client,
947 DS1337_REG_CONTROL, 2, buf);
948 if (tmp != 2) {
949 dev_dbg(&client->dev, "read error %d\n", tmp);
950 err = -EIO;
951 goto exit;
952 }
953
954 /* oscillator off? turn it on, so clock can tick. */
955 if (ds1307->regs[0] & DS1337_BIT_nEOSC)
956 ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
957
958 /*
959 * Using IRQ? Disable the square wave and both alarms.
960 * For some variants, be sure alarms can trigger when we're
961 * running on Vbackup (BBSQI/BBSQW)
962 */
963 if (ds1307->client->irq > 0 && chip->alarm) {
964 INIT_WORK(&ds1307->work, ds1307_work);
965
966 ds1307->regs[0] |= DS1337_BIT_INTCN
967 | bbsqi_bitpos[ds1307->type];
968 ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
969
970 want_irq = true;
971 }
972
973 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
974 ds1307->regs[0]);
975
976 /* oscillator fault? clear flag, and warn */
977 if (ds1307->regs[1] & DS1337_BIT_OSF) {
978 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
979 ds1307->regs[1] & ~DS1337_BIT_OSF);
980 dev_warn(&client->dev, "SET TIME!\n");
981 }
982 break;
983
984 case rx_8025:
985 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
986 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
987 if (tmp != 2) {
988 dev_dbg(&client->dev, "read error %d\n", tmp);
989 err = -EIO;
990 goto exit;
991 }
992
993 /* oscillator off? turn it on, so clock can tick. */
994 if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
995 ds1307->regs[1] |= RX8025_BIT_XST;
996 i2c_smbus_write_byte_data(client,
997 RX8025_REG_CTRL2 << 4 | 0x08,
998 ds1307->regs[1]);
999 dev_warn(&client->dev,
1000 "oscillator stop detected - SET TIME!\n");
1001 }
1002
1003 if (ds1307->regs[1] & RX8025_BIT_PON) {
1004 ds1307->regs[1] &= ~RX8025_BIT_PON;
1005 i2c_smbus_write_byte_data(client,
1006 RX8025_REG_CTRL2 << 4 | 0x08,
1007 ds1307->regs[1]);
1008 dev_warn(&client->dev, "power-on detected\n");
1009 }
1010
1011 if (ds1307->regs[1] & RX8025_BIT_VDET) {
1012 ds1307->regs[1] &= ~RX8025_BIT_VDET;
1013 i2c_smbus_write_byte_data(client,
1014 RX8025_REG_CTRL2 << 4 | 0x08,
1015 ds1307->regs[1]);
1016 dev_warn(&client->dev, "voltage drop detected\n");
1017 }
1018
1019 /* make sure we are running in 24hour mode */
1020 if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
1021 u8 hour;
1022
1023 /* switch to 24 hour mode */
1024 i2c_smbus_write_byte_data(client,
1025 RX8025_REG_CTRL1 << 4 | 0x08,
1026 ds1307->regs[0] |
1027 RX8025_BIT_2412);
1028
1029 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1030 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1031 if (tmp != 2) {
1032 dev_dbg(&client->dev, "read error %d\n", tmp);
1033 err = -EIO;
1034 goto exit;
1035 }
1036
1037 /* correct hour */
1038 hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
1039 if (hour == 12)
1040 hour = 0;
1041 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1042 hour += 12;
1043
1044 i2c_smbus_write_byte_data(client,
1045 DS1307_REG_HOUR << 4 | 0x08,
1046 hour);
1047 }
1048 break;
1049 case ds_1388:
1050 ds1307->offset = 1; /* Seconds starts at 1 */
1051 break;
1052 case mcp7941x:
1053 rtc_ops = &mcp7941x_rtc_ops;
1054 if (ds1307->client->irq > 0 && chip->alarm) {
1055 INIT_WORK(&ds1307->work, mcp7941x_work);
1056 want_irq = true;
1057 }
1058 break;
1059 default:
1060 break;
1061 }
1062
1063 read_rtc:
1064 /* read RTC registers */
1065 tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
1066 if (tmp != 8) {
1067 dev_dbg(&client->dev, "read error %d\n", tmp);
1068 err = -EIO;
1069 goto exit;
1070 }
1071
1072 /*
1073 * minimal sanity checking; some chips (like DS1340) don't
1074 * specify the extra bits as must-be-zero, but there are
1075 * still a few values that are clearly out-of-range.
1076 */
1077 tmp = ds1307->regs[DS1307_REG_SECS];
1078 switch (ds1307->type) {
1079 case ds_1307:
1080 case m41t00:
1081 /* clock halted? turn it on, so clock can tick. */
1082 if (tmp & DS1307_BIT_CH) {
1083 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1084 dev_warn(&client->dev, "SET TIME!\n");
1085 goto read_rtc;
1086 }
1087 break;
1088 case ds_1338:
1089 /* clock halted? turn it on, so clock can tick. */
1090 if (tmp & DS1307_BIT_CH)
1091 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1092
1093 /* oscillator fault? clear flag, and warn */
1094 if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
1095 i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
1096 ds1307->regs[DS1307_REG_CONTROL]
1097 & ~DS1338_BIT_OSF);
1098 dev_warn(&client->dev, "SET TIME!\n");
1099 goto read_rtc;
1100 }
1101 break;
1102 case ds_1340:
1103 /* clock halted? turn it on, so clock can tick. */
1104 if (tmp & DS1340_BIT_nEOSC)
1105 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1106
1107 tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
1108 if (tmp < 0) {
1109 dev_dbg(&client->dev, "read error %d\n", tmp);
1110 err = -EIO;
1111 goto exit;
1112 }
1113
1114 /* oscillator fault? clear flag, and warn */
1115 if (tmp & DS1340_BIT_OSF) {
1116 i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
1117 dev_warn(&client->dev, "SET TIME!\n");
1118 }
1119 break;
1120 case mcp7941x:
1121 /* make sure that the backup battery is enabled */
1122 if (!(ds1307->regs[DS1307_REG_WDAY] & MCP7941X_BIT_VBATEN)) {
1123 i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
1124 ds1307->regs[DS1307_REG_WDAY]
1125 | MCP7941X_BIT_VBATEN);
1126 }
1127
1128 /* clock halted? turn it on, so clock can tick. */
1129 if (!(tmp & MCP7941X_BIT_ST)) {
1130 i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
1131 MCP7941X_BIT_ST);
1132 dev_warn(&client->dev, "SET TIME!\n");
1133 goto read_rtc;
1134 }
1135
1136 break;
1137 default:
1138 break;
1139 }
1140
1141 tmp = ds1307->regs[DS1307_REG_HOUR];
1142 switch (ds1307->type) {
1143 case ds_1340:
1144 case m41t00:
1145 /*
1146 * NOTE: ignores century bits; fix before deploying
1147 * systems that will run through year 2100.
1148 */
1149 break;
1150 case rx_8025:
1151 break;
1152 default:
1153 if (!(tmp & DS1307_BIT_12HR))
1154 break;
1155
1156 /*
1157 * Be sure we're in 24 hour mode. Multi-master systems
1158 * take note...
1159 */
1160 tmp = bcd2bin(tmp & 0x1f);
1161 if (tmp == 12)
1162 tmp = 0;
1163 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1164 tmp += 12;
1165 i2c_smbus_write_byte_data(client,
1166 ds1307->offset + DS1307_REG_HOUR,
1167 bin2bcd(tmp));
1168 }
1169
1170 device_set_wakeup_capable(&client->dev, want_irq);
1171 ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
1172 rtc_ops, THIS_MODULE);
1173 if (IS_ERR(ds1307->rtc)) {
1174 return PTR_ERR(ds1307->rtc);
1175 }
1176
1177 if (want_irq) {
1178 err = request_irq(client->irq, ds1307_irq, IRQF_SHARED,
1179 ds1307->rtc->name, client);
1180 if (err) {
1181 client->irq = 0;
1182 dev_err(&client->dev, "unable to request IRQ!\n");
1183 } else {
1184
1185 set_bit(HAS_ALARM, &ds1307->flags);
1186 dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
1187 }
1188 }
1189
1190 if (chip->nvram_size) {
1191
1192 ds1307->nvram = devm_kzalloc(&client->dev,
1193 sizeof(struct bin_attribute),
1194 GFP_KERNEL);
1195 if (!ds1307->nvram) {
1196 dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
1197 } else {
1198
1199 ds1307->nvram->attr.name = "nvram";
1200 ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
1201
1202 sysfs_bin_attr_init(ds1307->nvram);
1203
1204 ds1307->nvram->read = ds1307_nvram_read;
1205 ds1307->nvram->write = ds1307_nvram_write;
1206 ds1307->nvram->size = chip->nvram_size;
1207 ds1307->nvram_offset = chip->nvram_offset;
1208
1209 err = sysfs_create_bin_file(&client->dev.kobj,
1210 ds1307->nvram);
1211 if (err) {
1212 dev_err(&client->dev,
1213 "unable to create sysfs file: %s\n",
1214 ds1307->nvram->attr.name);
1215 } else {
1216 set_bit(HAS_NVRAM, &ds1307->flags);
1217 dev_info(&client->dev, "%zu bytes nvram\n",
1218 ds1307->nvram->size);
1219 }
1220 }
1221 }
1222
1223 return 0;
1224
1225 exit:
1226 return err;
1227 }
1228
1229 static int ds1307_remove(struct i2c_client *client)
1230 {
1231 struct ds1307 *ds1307 = i2c_get_clientdata(client);
1232
1233 if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) {
1234 free_irq(client->irq, client);
1235 cancel_work_sync(&ds1307->work);
1236 }
1237
1238 if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
1239 sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
1240
1241 return 0;
1242 }
1243
1244 static struct i2c_driver ds1307_driver = {
1245 .driver = {
1246 .name = "rtc-ds1307",
1247 .owner = THIS_MODULE,
1248 },
1249 .probe = ds1307_probe,
1250 .remove = ds1307_remove,
1251 .id_table = ds1307_id,
1252 };
1253
1254 module_i2c_driver(ds1307_driver);
1255
1256 MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1257 MODULE_LICENSE("GPL");
Linux with added FPC-III support