gpio: of: Break out OF-only code
[linux/fpc-iii.git] / drivers / nvmem / sc27xx-efuse.c
blobc6ee21018d805d4e07bee7725cef3b04d86094e4
1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) 2018 Spreadtrum Communications Inc.
4 #include <linux/hwspinlock.h>
5 #include <linux/module.h>
6 #include <linux/of.h>
7 #include <linux/platform_device.h>
8 #include <linux/regmap.h>
9 #include <linux/nvmem-provider.h>
11 /* PMIC global registers definition */
12 #define SC27XX_MODULE_EN 0xc08
13 #define SC27XX_EFUSE_EN BIT(6)
15 /* Efuse controller registers definition */
16 #define SC27XX_EFUSE_GLB_CTRL 0x0
17 #define SC27XX_EFUSE_DATA_RD 0x4
18 #define SC27XX_EFUSE_DATA_WR 0x8
19 #define SC27XX_EFUSE_BLOCK_INDEX 0xc
20 #define SC27XX_EFUSE_MODE_CTRL 0x10
21 #define SC27XX_EFUSE_STATUS 0x14
22 #define SC27XX_EFUSE_WR_TIMING_CTRL 0x20
23 #define SC27XX_EFUSE_RD_TIMING_CTRL 0x24
24 #define SC27XX_EFUSE_EFUSE_DEB_CTRL 0x28
26 /* Mask definition for SC27XX_EFUSE_BLOCK_INDEX register */
27 #define SC27XX_EFUSE_BLOCK_MASK GENMASK(4, 0)
29 /* Bits definitions for SC27XX_EFUSE_MODE_CTRL register */
30 #define SC27XX_EFUSE_PG_START BIT(0)
31 #define SC27XX_EFUSE_RD_START BIT(1)
32 #define SC27XX_EFUSE_CLR_RDDONE BIT(2)
34 /* Bits definitions for SC27XX_EFUSE_STATUS register */
35 #define SC27XX_EFUSE_PGM_BUSY BIT(0)
36 #define SC27XX_EFUSE_READ_BUSY BIT(1)
37 #define SC27XX_EFUSE_STANDBY BIT(2)
38 #define SC27XX_EFUSE_GLOBAL_PROT BIT(3)
39 #define SC27XX_EFUSE_RD_DONE BIT(4)
41 /* Block number and block width (bytes) definitions */
42 #define SC27XX_EFUSE_BLOCK_MAX 32
43 #define SC27XX_EFUSE_BLOCK_WIDTH 2
45 /* Timeout (ms) for the trylock of hardware spinlocks */
46 #define SC27XX_EFUSE_HWLOCK_TIMEOUT 5000
48 /* Timeout (us) of polling the status */
49 #define SC27XX_EFUSE_POLL_TIMEOUT 3000000
50 #define SC27XX_EFUSE_POLL_DELAY_US 10000
52 struct sc27xx_efuse {
53 struct device *dev;
54 struct regmap *regmap;
55 struct hwspinlock *hwlock;
56 struct mutex mutex;
57 u32 base;
61 * On Spreadtrum platform, we have multi-subsystems will access the unique
62 * efuse controller, so we need one hardware spinlock to synchronize between
63 * the multiple subsystems.
65 static int sc27xx_efuse_lock(struct sc27xx_efuse *efuse)
67 int ret;
69 mutex_lock(&efuse->mutex);
71 ret = hwspin_lock_timeout_raw(efuse->hwlock,
72 SC27XX_EFUSE_HWLOCK_TIMEOUT);
73 if (ret) {
74 dev_err(efuse->dev, "timeout to get the hwspinlock\n");
75 mutex_unlock(&efuse->mutex);
76 return ret;
79 return 0;
82 static void sc27xx_efuse_unlock(struct sc27xx_efuse *efuse)
84 hwspin_unlock_raw(efuse->hwlock);
85 mutex_unlock(&efuse->mutex);
88 static int sc27xx_efuse_poll_status(struct sc27xx_efuse *efuse, u32 bits)
90 int ret;
91 u32 val;
93 ret = regmap_read_poll_timeout(efuse->regmap,
94 efuse->base + SC27XX_EFUSE_STATUS,
95 val, (val & bits),
96 SC27XX_EFUSE_POLL_DELAY_US,
97 SC27XX_EFUSE_POLL_TIMEOUT);
98 if (ret) {
99 dev_err(efuse->dev, "timeout to update the efuse status\n");
100 return ret;
103 return 0;
106 static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
108 struct sc27xx_efuse *efuse = context;
109 u32 buf, blk_index = offset / SC27XX_EFUSE_BLOCK_WIDTH;
110 u32 blk_offset = (offset % SC27XX_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE;
111 int ret;
113 if (blk_index > SC27XX_EFUSE_BLOCK_MAX ||
114 bytes > SC27XX_EFUSE_BLOCK_WIDTH)
115 return -EINVAL;
117 ret = sc27xx_efuse_lock(efuse);
118 if (ret)
119 return ret;
121 /* Enable the efuse controller. */
122 ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
123 SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
124 if (ret)
125 goto unlock_efuse;
128 * Before reading, we should ensure the efuse controller is in
129 * standby state.
131 ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_STANDBY);
132 if (ret)
133 goto disable_efuse;
135 /* Set the block address to be read. */
136 ret = regmap_write(efuse->regmap,
137 efuse->base + SC27XX_EFUSE_BLOCK_INDEX,
138 blk_index & SC27XX_EFUSE_BLOCK_MASK);
139 if (ret)
140 goto disable_efuse;
142 /* Start reading process from efuse memory. */
143 ret = regmap_update_bits(efuse->regmap,
144 efuse->base + SC27XX_EFUSE_MODE_CTRL,
145 SC27XX_EFUSE_RD_START,
146 SC27XX_EFUSE_RD_START);
147 if (ret)
148 goto disable_efuse;
151 * Polling the read done status to make sure the reading process
152 * is completed, that means the data can be read out now.
154 ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_RD_DONE);
155 if (ret)
156 goto disable_efuse;
158 /* Read data from efuse memory. */
159 ret = regmap_read(efuse->regmap, efuse->base + SC27XX_EFUSE_DATA_RD,
160 &buf);
161 if (ret)
162 goto disable_efuse;
164 /* Clear the read done flag. */
165 ret = regmap_update_bits(efuse->regmap,
166 efuse->base + SC27XX_EFUSE_MODE_CTRL,
167 SC27XX_EFUSE_CLR_RDDONE,
168 SC27XX_EFUSE_CLR_RDDONE);
170 disable_efuse:
171 /* Disable the efuse controller after reading. */
172 regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
173 unlock_efuse:
174 sc27xx_efuse_unlock(efuse);
176 if (!ret) {
177 buf >>= blk_offset;
178 memcpy(val, &buf, bytes);
181 return ret;
184 static int sc27xx_efuse_probe(struct platform_device *pdev)
186 struct device_node *np = pdev->dev.of_node;
187 struct nvmem_config econfig = { };
188 struct nvmem_device *nvmem;
189 struct sc27xx_efuse *efuse;
190 int ret;
192 efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
193 if (!efuse)
194 return -ENOMEM;
196 efuse->regmap = dev_get_regmap(pdev->dev.parent, NULL);
197 if (!efuse->regmap) {
198 dev_err(&pdev->dev, "failed to get efuse regmap\n");
199 return -ENODEV;
202 ret = of_property_read_u32(np, "reg", &efuse->base);
203 if (ret) {
204 dev_err(&pdev->dev, "failed to get efuse base address\n");
205 return ret;
208 ret = of_hwspin_lock_get_id(np, 0);
209 if (ret < 0) {
210 dev_err(&pdev->dev, "failed to get hwspinlock id\n");
211 return ret;
214 efuse->hwlock = hwspin_lock_request_specific(ret);
215 if (!efuse->hwlock) {
216 dev_err(&pdev->dev, "failed to request hwspinlock\n");
217 return -ENXIO;
220 mutex_init(&efuse->mutex);
221 efuse->dev = &pdev->dev;
222 platform_set_drvdata(pdev, efuse);
224 econfig.stride = 1;
225 econfig.word_size = 1;
226 econfig.read_only = true;
227 econfig.name = "sc27xx-efuse";
228 econfig.size = SC27XX_EFUSE_BLOCK_MAX * SC27XX_EFUSE_BLOCK_WIDTH;
229 econfig.reg_read = sc27xx_efuse_read;
230 econfig.priv = efuse;
231 econfig.dev = &pdev->dev;
232 nvmem = devm_nvmem_register(&pdev->dev, &econfig);
233 if (IS_ERR(nvmem)) {
234 dev_err(&pdev->dev, "failed to register nvmem config\n");
235 hwspin_lock_free(efuse->hwlock);
236 return PTR_ERR(nvmem);
239 return 0;
242 static int sc27xx_efuse_remove(struct platform_device *pdev)
244 struct sc27xx_efuse *efuse = platform_get_drvdata(pdev);
246 hwspin_lock_free(efuse->hwlock);
247 return 0;
250 static const struct of_device_id sc27xx_efuse_of_match[] = {
251 { .compatible = "sprd,sc2731-efuse" },
255 static struct platform_driver sc27xx_efuse_driver = {
256 .probe = sc27xx_efuse_probe,
257 .remove = sc27xx_efuse_remove,
258 .driver = {
259 .name = "sc27xx-efuse",
260 .of_match_table = sc27xx_efuse_of_match,
264 module_platform_driver(sc27xx_efuse_driver);
266 MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
267 MODULE_DESCRIPTION("Spreadtrum SC27xx efuse driver");
268 MODULE_LICENSE("GPL v2");