| commit | c5842b47b2945d6db24b4db6b2c7364e94cbc78b | |
| author | Linus Walleij <linus.walleij@linaro.org> | |
| Thu, 30 Jun 2016 01:48:47 +0000 (30 03:48 +0200) | ||
| committer | Jonathan Cameron <jic23@kernel.org> | |
| Thu, 30 Jun 2016 19:39:40 +0000 (30 20:39 +0100) | ||
| tree | 2a4c4d65634f11163445bb55b9433093cf762fa7 | treesnapshot (tar.gz zip) |
| parent | 78f5027132243b7071dc59ea6f717e2c48e12031 | commitdiff |
iio: pressure: bmp280: add reset GPIO line handling
On the APQ8060 Dragonboard the reset line to the BMP085 pressure
sensor is not deasserted on boot, so the driver needs to handle
this. For a simple GPIO line supplied as a descriptor (from a board
file, device tree or ACPI) this does the trick.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
On the APQ8060 Dragonboard the reset line to the BMP085 pressure
sensor is not deasserted on boot, so the driver needs to handle
this. For a simple GPIO line supplied as a descriptor (from a board
file, device tree or ACPI) this does the trick.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| drivers/iio/pressure/bmp280.c | diffblobblamehistory |