From 41485a90d573764738a2d096c01133fe30c2ebca Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 29 May 2015 17:01:51 +0300 Subject: [PATCH] xhci: optimize xhci bus resume time We used to write the root port state changes in turn for every port, sleeping 20ms after every port state change. Suspended usb2 ports need two state changes, taking minimun 40ms per port. Now instead poll the Port Link State Change (PLC) bit as the state change to U0 will set this bit. Suspended usb2 ports still need the extra 20ms delay, but we now change all the port states at once so we only need to sleep 20ms once all together Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 65 ++++++++++++++++++++++++++------------------- 1 file changed, 38 insertions(+), 27 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0827d7c96527..e75c565feb53 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1184,6 +1184,10 @@ int xhci_bus_resume(struct usb_hcd *hcd) struct xhci_bus_state *bus_state; u32 temp; unsigned long flags; + unsigned long port_was_suspended = 0; + bool need_usb2_u3_exit = false; + int slot_id; + int sret; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1207,7 +1211,6 @@ int xhci_bus_resume(struct usb_hcd *hcd) /* Check whether need resume ports. If needed resume port and disable remote wakeup */ u32 temp; - int slot_id; temp = readl(port_array[port_index]); if (DEV_SUPERSPEED(temp)) @@ -1216,39 +1219,47 @@ int xhci_bus_resume(struct usb_hcd *hcd) temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); if (test_bit(port_index, &bus_state->bus_suspended) && (temp & PORT_PLS_MASK)) { - if (DEV_SUPERSPEED(temp)) { - xhci_set_link_state(xhci, port_array, - port_index, XDEV_U0); - } else { + set_bit(port_index, &port_was_suspended); + if (!DEV_SUPERSPEED(temp)) { xhci_set_link_state(xhci, port_array, port_index, XDEV_RESUME); - - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); - spin_lock_irqsave(&xhci->lock, flags); - - xhci_set_link_state(xhci, port_array, - port_index, XDEV_U0); + need_usb2_u3_exit = true; } - /* wait for the port to enter U0 and report port link - * state change. - */ - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); - spin_lock_irqsave(&xhci->lock, flags); - - /* Clear PLC */ - xhci_test_and_clear_bit(xhci, port_array, port_index, - PORT_PLC); - - slot_id = xhci_find_slot_id_by_port(hcd, - xhci, port_index + 1); - if (slot_id) - xhci_ring_device(xhci, slot_id); } else writel(temp, port_array[port_index]); } + if (need_usb2_u3_exit) { + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(20); + spin_lock_irqsave(&xhci->lock, flags); + } + + port_index = max_ports; + while (port_index--) { + if (!(port_was_suspended & BIT(port_index))) + continue; + /* Clear PLC to poll it later after XDEV_U0 */ + xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); + xhci_set_link_state(xhci, port_array, port_index, XDEV_U0); + } + + port_index = max_ports; + while (port_index--) { + if (!(port_was_suspended & BIT(port_index))) + continue; + /* Poll and Clear PLC */ + sret = xhci_handshake(port_array[port_index], PORT_PLC, + PORT_PLC, 10 * 1000); + if (sret) + xhci_warn(xhci, "port %d resume PLC timeout\n", + port_index); + xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); + if (slot_id) + xhci_ring_device(xhci, slot_id); + } + (void) readl(&xhci->op_regs->command); bus_state->next_statechange = jiffies + msecs_to_jiffies(5); -- 2.11.4.GIT