From 46e6b3aa65c86bf204deb5ff590e186639009427 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 4 Jun 2016 10:10:04 +0300 Subject: [PATCH] ARM: dts: clps711x: Add DT Cirrus Logic EDB7211 Development board This adds the Cirrus Logic EP7209,EP7211 DT templates and support for EDB7211 Development board. Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/ep7209.dtsi | 191 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/ep7211-edb7211.dts | 100 ++++++++++++++++++ arch/arm/boot/dts/ep7211.dtsi | 12 +++ 4 files changed, 305 insertions(+) create mode 100644 arch/arm/boot/dts/ep7209.dtsi create mode 100644 arch/arm/boot/dts/ep7211-edb7211.dts create mode 100644 arch/arm/boot/dts/ep7211.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7bbda1ea314f..e8ce0cb859ee 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -109,6 +109,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb +dtb-$(CONFIG_ARCH_CLPS711X) += \ + ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-enbw-cmc.dtb \ da850-evm.dtb diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi new file mode 100644 index 000000000000..aaf1261d2ee4 --- /dev/null +++ b/arch/arm/boot/dts/ep7209.dtsi @@ -0,0 +1,191 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +/dts-v1/; + +#include "skeleton.dtsi" + +#include + +/ { + model = "Cirrus Logic EP7209"; + compatible = "cirrus,ep7209"; + + aliases { + gpio0 = &porta; + gpio1 = &portb; + gpio3 = &portd; + gpio4 = &porte; + serial0 = &uart1; + serial1 = &uart2; + spi0 = &spi; + timer0 = &timer1; + timer1 = &timer2; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm720t"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + clks: clks@80000000 { + #clock-cells = <1>; + compatible = "cirrus,ep7209-clk"; + reg = <0x80000000 0xc000>; + startup-frequency = <73728000>; + }; + + intc: intc@80000000 { + compatible = "cirrus,ep7209-intc"; + reg = <0x80000000 0x4000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + porta: gpio@80000000 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000000 0x1 0x80000040 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + portb: gpio@80000001 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000001 0x1 0x80000041 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + portd: gpio@80000003 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000003 0x1 0x80000043 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + porte: gpio@80000083 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000083 0x1 0x800000c3 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + syscon1: syscon@80000100 { + compatible = "cirrus,ep7209-syscon1", "syscon"; + reg = <0x80000100 0x80>; + }; + + bus: bus@80000180 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "cirrus,ep7209-bus", "simple-bus"; + clocks = <&clks CLPS711X_CLK_BUS>; + reg = <0x80000180 0x80>; + ranges = < + 0 0 0x00000000 0x10000000 + 1 0 0x10000000 0x10000000 + 2 0 0x20000000 0x10000000 + 3 0 0x30000000 0x10000000 + 4 0 0x40000000 0x10000000 + 5 0 0x50000000 0x10000000 + 6 0 0x60000000 0x0000c000 + 7 0 0x70000000 0x00000080 + >; + }; + + fb: fb@800002c0 { + compatible = "cirrus,ep7209-fb"; + reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; + clocks = <&clks CLPS711X_CLK_BUS>; + status = "disabled"; + }; + + timer1: timer@80000300 { + compatible = "cirrus,ep7209-timer"; + reg = <0x80000300 0x4>; + clocks = <&clks CLPS711X_CLK_TIMER1>; + interrupts = <8>; + }; + + timer2: timer@80000340 { + compatible = "cirrus,ep7209-timer"; + reg = <0x80000340 0x4>; + clocks = <&clks CLPS711X_CLK_TIMER2>; + interrupts = <9>; + }; + + pwm: pwm@80000400 { + compatible = "cirrus,ep7209-pwm"; + reg = <0x80000400 0x4>; + clocks = <&clks CLPS711X_CLK_PWM>; + #pwm-cells = <1>; + }; + + uart1: uart@80000480 { + compatible = "cirrus,ep7209-uart"; + reg = <0x80000480 0x80>; + interrupts = <12 13>; + clocks = <&clks CLPS711X_CLK_UART>; + syscon = <&syscon1>; + }; + + spi: spi@80000500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cirrus,ep7209-spi"; + reg = <0x80000500 0x4>; + interrupts = <15>; + clocks = <&clks CLPS711X_CLK_SPI>; + status = "disabled"; + }; + + syscon2: syscon@80001100 { + compatible = "cirrus,ep7209-syscon2", "syscon"; + reg = <0x80001100 0x80>; + }; + + uart2: uart@80001480 { + compatible = "cirrus,ep7209-uart"; + reg = <0x80001480 0x80>; + interrupts = <28 29>; + clocks = <&clks CLPS711X_CLK_UART>; + syscon = <&syscon2>; + }; + + dai: dai@80002000 { + #sound-dai-cells = <0>; + compatible = "cirrus,ep7209-dai"; + reg = <0x80002000 0x604>; + clocks = <&clks CLPS711X_CLK_PLL>; + clock-names = "pll"; + interrupts = <32>; + status = "disabled"; + }; + + syscon3: syscon@80002200 { + compatible = "cirrus,ep7209-syscon3", "syscon"; + reg = <0x80002200 0x40>; + }; + }; + + mctrl: mctrl { + compatible = "cirrus,ep7209-mctrl-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts new file mode 100644 index 000000000000..9a134ed271eb --- /dev/null +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -0,0 +1,100 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +#include "ep7211.dtsi" +#include + +/ { + model = "Cirrus Logic EP7211 Development Board"; + compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; + + memory { + reg = <0xc0000000 0x02000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0>; + brightness-levels = < + 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 + 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf + >; + default-brightness-level = <0x0>; + power-supply = <&blen>; + }; + + display: display { + model = "320x240x4"; + native-mode = <&timing0>; + bits-per-pixel = <4>; + ac-prescale = <17>; + + display-timings { + timing0: 320x240 { + hactive = <320>; + hback-porch = <0>; + hfront-porch = <0>; + hsync-len = <0>; + vactive = <240>; + vback-porch = <0>; + vfront-porch = <0>; + vsync-len = <0>; + clock-frequency = <6500000>; + }; + }; + }; + + i2c: i2c { + compatible = "i2c-gpio"; + gpios = <&portd 4 GPIO_ACTIVE_HIGH>, + <&portd 5 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + i2c-gpio,scl-output-only; + #address-cells = <1>; + #size-cells = <0>; + }; + + lcddc: lcddc { + compatible = "regulator-fixed"; + regulator-name = "BACKLIGHT ENABLE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&portd 1 GPIO_ACTIVE_HIGH>; + }; + + blen: blen { + compatible = "regulator-fixed"; + regulator-name = "BACKLIGHT ENABLE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&portd 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&bus { + flash: nor@00000000 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&fb { + display = <&display>; + lcd-supply = <&lcddc>; + status = "okay"; +}; + +&portd { + lcden { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LCD ENABLE"; + }; +}; diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi new file mode 100644 index 000000000000..e438f6db0673 --- /dev/null +++ b/arch/arm/boot/dts/ep7211.dtsi @@ -0,0 +1,12 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +#include "ep7209.dtsi" + +/ { + model = "Cirrus Logic EP7211"; + compatible = "cirrus,ep7211", "cirrus,ep7209"; +}; -- 2.11.4.GIT