From 59db5e2d7f9d85ac7d62c1a67d18dc1993c935bd Mon Sep 17 00:00:00 2001 From: Ludovic Barre Date: Mon, 8 Oct 2018 14:08:47 +0200 Subject: [PATCH] mmc: mmci: add variant property to define irq pio mask This patch allows to define specific pio mask for variants. Needed to support the STM32 sdmmc variant which has some bits with different meaning (bits: 21,20,13,12,9) Signed-off-by: Ludovic Barre Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmci.c | 13 +++++++++++-- drivers/mmc/host/mmci.h | 5 ++++- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0443b3ace749..ca442fbc56b4 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -67,6 +67,7 @@ static struct variant_data variant_arm = { .f_max = 100000000, .reversed_irq_handling = true, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_ROD, .init = mmci_variant_init, @@ -85,6 +86,7 @@ static struct variant_data variant_arm_extended_fifo = { .pwrreg_powerup = MCI_PWR_UP, .f_max = 100000000, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_ROD, .init = mmci_variant_init, @@ -104,6 +106,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = { .pwrreg_powerup = MCI_PWR_UP, .f_max = 100000000, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_ROD, .init = mmci_variant_init, @@ -129,6 +132,7 @@ static struct variant_data variant_u300 = { .pwrreg_clkgate = true, .pwrreg_nopower = true, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_OD, .init = mmci_variant_init, @@ -155,6 +159,7 @@ static struct variant_data variant_nomadik = { .pwrreg_clkgate = true, .pwrreg_nopower = true, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_OD, .init = mmci_variant_init, @@ -187,6 +192,7 @@ static struct variant_data variant_ux500 = { .busy_detect_mask = MCI_ST_BUSYENDMASK, .pwrreg_nopower = true, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_OD, .init = mmci_variant_init, @@ -221,6 +227,7 @@ static struct variant_data variant_ux500v2 = { .busy_detect_mask = MCI_ST_BUSYENDMASK, .pwrreg_nopower = true, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_OD, .init = mmci_variant_init, @@ -237,6 +244,7 @@ static struct variant_data variant_stm32 = { .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, .cmdreg_srsp = MCI_CPSM_RESPONSE, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .datalength_bits = 24, .datactrl_blocksz = 11, .datactrl_dpsm_enable = MCI_DPSM_ENABLE, @@ -273,6 +281,7 @@ static struct variant_data variant_qcom = { .qcom_fifo = true, .qcom_dml = true, .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_ROD, .init = qcom_variant_init, @@ -556,7 +565,7 @@ static void mmci_set_mask1(struct mmci_host *host, unsigned int mask) if (host->singleirq) { unsigned int mask0 = readl(base + MMCIMASK0); - mask0 &= ~MCI_IRQ1MASK; + mask0 &= ~variant->irq_pio_mask; mask0 |= mask; writel(mask0, base + MMCIMASK0); @@ -1458,7 +1467,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) if (status & host->mask1_reg) mmci_pio_irq(irq, dev_id); - status &= ~MCI_IRQ1MASK; + status &= ~host->variant->irq_pio_mask; } /* diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 04d021e83dd0..783a7ada4d69 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -186,7 +186,7 @@ MCI_CMDRESPENDMASK | MCI_CMDSENTMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ -#define MCI_IRQ1MASK \ +#define MCI_IRQ_PIO_MASK \ (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \ MCI_TXFIFOHALFEMPTYMASK) @@ -239,6 +239,8 @@ struct mmci_host; * @qcom_dml: enables qcom specific dma glue for dma transfers. * @reversed_irq_handling: handle data irq before cmd irq. * @mmcimask1: true if variant have a MMCIMASK1 register. + * @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask + * register * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS * register. * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register @@ -278,6 +280,7 @@ struct variant_data { u8 qcom_dml:1; u8 reversed_irq_handling:1; u8 mmcimask1:1; + unsigned int irq_pio_mask; u32 start_err; u32 opendrain; void (*init)(struct mmci_host *host); -- 2.11.4.GIT