From e2c205ab669b165190b19c1f925d96edba394339 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Thu, 17 May 2018 17:47:00 +0200 Subject: [PATCH] ARM: dts: stm32: add USB OTG HS support for stm32mp157c SoC This patch adds support for USB OTG HS on STM32MP157C SoC. USB OTG HS controller is based on DWC2 controller. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index d14c94034089..04c62acaf5a9 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -626,6 +626,21 @@ clocks = <&rcc DMAMUX>; }; + usbotg_hs: usb-otg@49000000 { + compatible = "snps,dwc2"; + reg = <0x49000000 0x10000>; + clocks = <&rcc USBO_K>; + clock-names = "otg"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = ; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 64 64 64 32 32>; + dr_mode = "otg"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; -- 2.11.4.GIT