Remove building with NOCRYPTO option
[minix.git] / lib / libc / arch / sparc64 / softfloat / softfloat.h
blob881669265b18590fa72280d67381ec124cff01f9
1 /* $NetBSD: softfloat.h,v 1.8 2011/07/07 07:14:57 matt Exp $ */
3 /* This is a derivative work. */
5 /*
6 ===============================================================================
8 This C header file is part of the SoftFloat IEC/IEEE Floating-point
9 Arithmetic Package, Release 2a.
11 Written by John R. Hauser. This work was made possible in part by the
12 International Computer Science Institute, located at Suite 600, 1947 Center
13 Street, Berkeley, California 94704. Funding was partially provided by the
14 National Science Foundation under grant MIP-9311980. The original version
15 of this code was written as part of a project to build a fixed-point vector
16 processor in collaboration with the University of California at Berkeley,
17 overseen by Profs. Nelson Morgan and John Wawrzynek. More information
18 is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
19 arithmetic/SoftFloat.html'.
21 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
22 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
23 TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
24 PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
25 AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
27 Derivative works are acceptable, even for commercial purposes, so long as
28 (1) they include prominent notice that the work is derivative, and (2) they
29 include prominent notice akin to these four paragraphs for those parts of
30 this code that are retained.
32 ===============================================================================
36 -------------------------------------------------------------------------------
37 The macro `FLOATX80' must be defined to enable the extended double-precision
38 floating-point format `floatx80'. If this macro is not defined, the
39 `floatx80' type will not be defined, and none of the functions that either
40 input or output the `floatx80' type will be defined. The same applies to
41 the `FLOAT128' macro and the quadruple-precision format `float128'.
42 -------------------------------------------------------------------------------
44 /* #define FLOATX80 */
45 #define FLOAT128
47 #include "softfloat-qp.h"
49 #include <machine/ieeefp.h>
52 -------------------------------------------------------------------------------
53 Software IEC/IEEE floating-point types.
54 -------------------------------------------------------------------------------
56 typedef unsigned int float32;
57 typedef unsigned long long float64;
58 #ifdef FLOATX80
59 typedef struct {
60 unsigned short high;
61 unsigned long long low;
62 } floatx80;
63 #endif
64 #ifdef FLOAT128
65 typedef struct {
66 unsigned long long high, low;
67 } float128;
68 #endif
71 -------------------------------------------------------------------------------
72 Software IEC/IEEE floating-point underflow tininess-detection mode.
73 -------------------------------------------------------------------------------
75 #ifndef SOFTFLOAT_FOR_GCC
76 extern int8 float_detect_tininess;
77 #endif
78 enum {
79 float_tininess_after_rounding = 0,
80 float_tininess_before_rounding = 1
84 -------------------------------------------------------------------------------
85 Software IEC/IEEE floating-point rounding mode.
86 -------------------------------------------------------------------------------
88 extern fp_rnd float_rounding_mode;
89 #define float_round_nearest_even FP_RN
90 #define float_round_to_zero FP_RZ
91 #define float_round_down FP_RM
92 #define float_round_up FP_RP
95 -------------------------------------------------------------------------------
96 Software IEC/IEEE floating-point exception flags.
97 -------------------------------------------------------------------------------
99 extern fp_except float_exception_flags;
100 extern fp_except float_exception_mask;
101 enum {
102 float_flag_inexact = FP_X_IMP,
103 float_flag_underflow = FP_X_UFL,
104 float_flag_overflow = FP_X_OFL,
105 float_flag_divbyzero = FP_X_DZ,
106 float_flag_invalid = FP_X_INV
110 -------------------------------------------------------------------------------
111 Routine to raise any or all of the software IEC/IEEE floating-point
112 exception flags.
113 -------------------------------------------------------------------------------
115 void float_raise( fp_except );
118 -------------------------------------------------------------------------------
119 Software IEC/IEEE integer-to-floating-point conversion routines.
120 -------------------------------------------------------------------------------
122 float32 int32_to_float32( int32 );
123 float32 uint32_to_float32( uint32 );
124 float64 int32_to_float64( int32 );
125 float64 uint32_to_float64( uint32 );
126 #ifdef FLOATX80
127 floatx80 int32_to_floatx80( int32 );
128 floatx80 uint32_to_floatx80( uint32 );
129 #endif
130 #ifdef FLOAT128
131 float128 int32_to_float128( int32 );
132 float128 uint32_to_float128( uint32 );
133 #endif
134 float32 int64_to_float32( long long );
135 float64 int64_to_float64( long long );
136 #ifdef FLOATX80
137 floatx80 int64_to_floatx80( long long );
138 #endif
139 #ifdef FLOAT128
140 float128 int64_to_float128( long long );
141 #endif
144 -------------------------------------------------------------------------------
145 Software IEC/IEEE single-precision conversion routines.
146 -------------------------------------------------------------------------------
148 int float32_to_int32( float32 );
149 int float32_to_int32_round_to_zero( float32 );
150 unsigned int float32_to_uint32_round_to_zero( float32 );
151 long long float32_to_int64( float32 );
152 long long float32_to_int64_round_to_zero( float32 );
153 float64 float32_to_float64( float32 );
154 #ifdef FLOATX80
155 floatx80 float32_to_floatx80( float32 );
156 #endif
157 #ifdef FLOAT128
158 float128 float32_to_float128( float32 );
159 #endif
162 -------------------------------------------------------------------------------
163 Software IEC/IEEE single-precision operations.
164 -------------------------------------------------------------------------------
166 float32 float32_round_to_int( float32 );
167 float32 float32_add( float32, float32 );
168 float32 float32_sub( float32, float32 );
169 float32 float32_mul( float32, float32 );
170 float32 float32_div( float32, float32 );
171 float32 float32_rem( float32, float32 );
172 float32 float32_sqrt( float32 );
173 flag float32_eq( float32, float32 );
174 flag float32_le( float32, float32 );
175 flag float32_lt( float32, float32 );
176 flag float32_eq_signaling( float32, float32 );
177 flag float32_le_quiet( float32, float32 );
178 flag float32_lt_quiet( float32, float32 );
179 flag float32_is_signaling_nan( float32 );
182 -------------------------------------------------------------------------------
183 Software IEC/IEEE double-precision conversion routines.
184 -------------------------------------------------------------------------------
186 int float64_to_int32( float64 );
187 int float64_to_int32_round_to_zero( float64 );
188 unsigned int float64_to_uint32_round_to_zero( float64 );
189 long long float64_to_int64( float64 );
190 long long float64_to_int64_round_to_zero( float64 );
191 float32 float64_to_float32( float64 );
192 #ifdef FLOATX80
193 floatx80 float64_to_floatx80( float64 );
194 #endif
195 #ifdef FLOAT128
196 float128 float64_to_float128( float64 );
197 #endif
200 -------------------------------------------------------------------------------
201 Software IEC/IEEE double-precision operations.
202 -------------------------------------------------------------------------------
204 float64 float64_round_to_int( float64 );
205 float64 float64_add( float64, float64 );
206 float64 float64_sub( float64, float64 );
207 float64 float64_mul( float64, float64 );
208 float64 float64_div( float64, float64 );
209 float64 float64_rem( float64, float64 );
210 float64 float64_sqrt( float64 );
211 flag float64_eq( float64, float64 );
212 flag float64_le( float64, float64 );
213 flag float64_lt( float64, float64 );
214 flag float64_eq_signaling( float64, float64 );
215 flag float64_le_quiet( float64, float64 );
216 flag float64_lt_quiet( float64, float64 );
217 flag float64_is_signaling_nan( float64 );
219 #ifdef FLOATX80
222 -------------------------------------------------------------------------------
223 Software IEC/IEEE extended double-precision conversion routines.
224 -------------------------------------------------------------------------------
226 int floatx80_to_int32( floatx80 );
227 int floatx80_to_int32_round_to_zero( floatx80 );
228 long long floatx80_to_int64( floatx80 );
229 long long floatx80_to_int64_round_to_zero( floatx80 );
230 float32 floatx80_to_float32( floatx80 );
231 float64 floatx80_to_float64( floatx80 );
232 #ifdef FLOAT128
233 float128 floatx80_to_float128( floatx80 );
234 #endif
237 -------------------------------------------------------------------------------
238 Software IEC/IEEE extended double-precision rounding precision. Valid
239 values are 32, 64, and 80.
240 -------------------------------------------------------------------------------
242 extern int floatx80_rounding_precision;
245 -------------------------------------------------------------------------------
246 Software IEC/IEEE extended double-precision operations.
247 -------------------------------------------------------------------------------
249 floatx80 floatx80_round_to_int( floatx80 );
250 floatx80 floatx80_add( floatx80, floatx80 );
251 floatx80 floatx80_sub( floatx80, floatx80 );
252 floatx80 floatx80_mul( floatx80, floatx80 );
253 floatx80 floatx80_div( floatx80, floatx80 );
254 floatx80 floatx80_rem( floatx80, floatx80 );
255 floatx80 floatx80_sqrt( floatx80 );
256 flag floatx80_eq( floatx80, floatx80 );
257 flag floatx80_le( floatx80, floatx80 );
258 flag floatx80_lt( floatx80, floatx80 );
259 flag floatx80_eq_signaling( floatx80, floatx80 );
260 flag floatx80_le_quiet( floatx80, floatx80 );
261 flag floatx80_lt_quiet( floatx80, floatx80 );
262 flag floatx80_is_signaling_nan( floatx80 );
264 #endif
266 #ifdef FLOAT128
269 -------------------------------------------------------------------------------
270 Software IEC/IEEE quadruple-precision conversion routines.
271 -------------------------------------------------------------------------------
273 int float128_to_int32( float128 );
274 int float128_to_int32_round_to_zero( float128 );
275 long long float128_to_int64( float128 );
276 long long float128_to_int64_round_to_zero( float128 );
277 unsigned long long float128_to_uint64_round_to_zero( float128 );
278 float32 float128_to_float32( float128 );
279 float64 float128_to_float64( float128 );
280 #ifdef FLOATX80
281 floatx80 float128_to_floatx80( float128 );
282 #endif
285 -------------------------------------------------------------------------------
286 Software IEC/IEEE quadruple-precision operations.
287 -------------------------------------------------------------------------------
289 float128 float128_round_to_int( float128 );
290 float128 float128_add( float128, float128 );
291 float128 float128_sub( float128, float128 );
292 float128 float128_mul( float128, float128 );
293 float128 float128_div( float128, float128 );
294 float128 float128_rem( float128, float128 );
295 float128 float128_sqrt( float128 );
296 flag float128_eq( float128, float128 );
297 flag float128_le( float128, float128 );
298 flag float128_lt( float128, float128 );
299 flag float128_eq_signaling( float128, float128 );
300 flag float128_le_quiet( float128, float128 );
301 flag float128_lt_quiet( float128, float128 );
302 flag float128_is_signaling_nan( float128 );
303 flag float128_is_nan( float128 );
305 #endif