Use dentry_path() to create full path to inode object
[pohmelfs.git] / include / linux / serial_sci.h
blob78779074f6e8ff9b4f0d95fe9575e008eb0d1c81
1 #ifndef __LINUX_SERIAL_SCI_H
2 #define __LINUX_SERIAL_SCI_H
4 #include <linux/serial_core.h>
5 #include <linux/sh_dma.h>
7 /*
8 * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
9 */
11 #define SCIx_NOT_SUPPORTED (-1)
13 enum {
14 SCBRR_ALGO_1, /* ((clk + 16 * bps) / (16 * bps) - 1) */
15 SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */
16 SCBRR_ALGO_3, /* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
17 SCBRR_ALGO_4, /* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
18 SCBRR_ALGO_5, /* (((clk * 1000 / 32) / bps) - 1) */
21 #define SCSCR_TIE (1 << 7)
22 #define SCSCR_RIE (1 << 6)
23 #define SCSCR_TE (1 << 5)
24 #define SCSCR_RE (1 << 4)
25 #define SCSCR_REIE (1 << 3) /* not supported by all parts */
26 #define SCSCR_TOIE (1 << 2) /* not supported by all parts */
27 #define SCSCR_CKE1 (1 << 1)
28 #define SCSCR_CKE0 (1 << 0)
30 /* SCxSR SCI */
31 #define SCI_TDRE 0x80
32 #define SCI_RDRF 0x40
33 #define SCI_ORER 0x20
34 #define SCI_FER 0x10
35 #define SCI_PER 0x08
36 #define SCI_TEND 0x04
38 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
40 /* SCxSR SCIF */
41 #define SCIF_ER 0x0080
42 #define SCIF_TEND 0x0040
43 #define SCIF_TDFE 0x0020
44 #define SCIF_BRK 0x0010
45 #define SCIF_FER 0x0008
46 #define SCIF_PER 0x0004
47 #define SCIF_RDF 0x0002
48 #define SCIF_DR 0x0001
50 #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
52 /* SCSPTR, optional */
53 #define SCSPTR_RTSIO (1 << 7)
54 #define SCSPTR_CTSIO (1 << 5)
56 /* Offsets into the sci_port->irqs array */
57 enum {
58 SCIx_ERI_IRQ,
59 SCIx_RXI_IRQ,
60 SCIx_TXI_IRQ,
61 SCIx_BRI_IRQ,
62 SCIx_NR_IRQS,
64 SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */
67 /* Offsets into the sci_port->gpios array */
68 enum {
69 SCIx_SCK,
70 SCIx_RXD,
71 SCIx_TXD,
72 SCIx_CTS,
73 SCIx_RTS,
75 SCIx_NR_FNS,
78 enum {
79 SCIx_PROBE_REGTYPE,
81 SCIx_SCI_REGTYPE,
82 SCIx_IRDA_REGTYPE,
83 SCIx_SCIFA_REGTYPE,
84 SCIx_SCIFB_REGTYPE,
85 SCIx_SH2_SCIF_FIFODATA_REGTYPE,
86 SCIx_SH3_SCIF_REGTYPE,
87 SCIx_SH4_SCIF_REGTYPE,
88 SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
89 SCIx_SH4_SCIF_FIFODATA_REGTYPE,
90 SCIx_SH7705_SCIF_REGTYPE,
92 SCIx_NR_REGTYPES,
95 #define SCIx_IRQ_MUXED(irq) \
96 { \
97 [SCIx_ERI_IRQ] = (irq), \
98 [SCIx_RXI_IRQ] = (irq), \
99 [SCIx_TXI_IRQ] = (irq), \
100 [SCIx_BRI_IRQ] = (irq), \
103 #define SCIx_IRQ_IS_MUXED(port) \
104 ((port)->cfg->irqs[SCIx_ERI_IRQ] == \
105 (port)->cfg->irqs[SCIx_RXI_IRQ]) || \
106 ((port)->cfg->irqs[SCIx_ERI_IRQ] && \
107 !(port)->cfg->irqs[SCIx_RXI_IRQ])
109 * SCI register subset common for all port types.
110 * Not all registers will exist on all parts.
112 enum {
113 SCSMR, SCBRR, SCSCR, SCxSR,
114 SCFCR, SCFDR, SCxTDR, SCxRDR,
115 SCLSR, SCTFDR, SCRFDR, SCSPTR,
117 SCIx_NR_REGS,
120 struct device;
122 struct plat_sci_port_ops {
123 void (*init_pins)(struct uart_port *, unsigned int cflag);
127 * Port-specific capabilities
129 #define SCIx_HAVE_RTSCTS (1 << 0)
132 * Platform device specific platform_data struct
134 struct plat_sci_port {
135 unsigned long mapbase; /* resource base */
136 unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */
137 unsigned int gpios[SCIx_NR_FNS]; /* SCK, RXD, TXD, CTS, RTS */
138 unsigned int type; /* SCI / SCIF / IRDA */
139 upf_t flags; /* UPF_* flags */
140 unsigned long capabilities; /* Port features/capabilities */
142 unsigned int scbrr_algo_id; /* SCBRR calculation algo */
143 unsigned int scscr; /* SCSCR initialization */
146 * Platform overrides if necessary, defaults otherwise.
148 int overrun_bit;
149 unsigned int error_mask;
151 int port_reg;
152 unsigned char regshift;
153 unsigned char regtype;
155 struct plat_sci_port_ops *ops;
157 unsigned int dma_slave_tx;
158 unsigned int dma_slave_rx;
161 #endif /* __LINUX_SERIAL_SCI_H */