Use dentry_path() to create full path to inode object
[pohmelfs.git] / include / linux / usb / ehci_def.h
blob7cc95ee3606bcc415978f316f5c1f0d94c2ca0bb
1 /*
2 * Copyright (c) 2001-2002 by David Brownell
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 #ifndef __LINUX_USB_EHCI_DEF_H
20 #define __LINUX_USB_EHCI_DEF_H
22 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
24 /* Section 2.2 Host Controller Capability Registers */
25 struct ehci_caps {
26 /* these fields are specified as 8 and 16 bit registers,
27 * but some hosts can't perform 8 or 16 bit PCI accesses.
28 * some hosts treat caplength and hciversion as parts of a 32-bit
29 * register, others treat them as two separate registers, this
30 * affects the memory map for big endian controllers.
32 u32 hc_capbase;
33 #define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
34 (ehci_big_endian_capbase(ehci) ? 24 : 0)))
35 #define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
36 (ehci_big_endian_capbase(ehci) ? 0 : 16)))
37 u32 hcs_params; /* HCSPARAMS - offset 0x4 */
38 #define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
39 #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
40 #define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
41 #define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
42 #define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
43 #define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
44 #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
46 u32 hcc_params; /* HCCPARAMS - offset 0x8 */
47 /* EHCI 1.1 addendum */
48 #define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
49 #define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
50 #define HCC_LPM(p) ((p)&(1 << 17))
51 #define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
53 #define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
54 #define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
55 #define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
56 #define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
57 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
58 #define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
59 u8 portroute[8]; /* nibbles for routing - offset 0xC */
63 /* Section 2.3 Host Controller Operational Registers */
64 struct ehci_regs {
66 /* USBCMD: offset 0x00 */
67 u32 command;
69 /* EHCI 1.1 addendum */
70 #define CMD_HIRD (0xf<<24) /* host initiated resume duration */
71 #define CMD_PPCEE (1<<15) /* per port change event enable */
72 #define CMD_FSP (1<<14) /* fully synchronized prefetch */
73 #define CMD_ASPE (1<<13) /* async schedule prefetch enable */
74 #define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */
75 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
76 #define CMD_PARK (1<<11) /* enable "park" on async qh */
77 #define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
78 #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
79 #define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
80 #define CMD_ASE (1<<5) /* async schedule enable */
81 #define CMD_PSE (1<<4) /* periodic schedule enable */
82 /* 3:2 is periodic frame list size */
83 #define CMD_RESET (1<<1) /* reset HC not bus */
84 #define CMD_RUN (1<<0) /* start/stop HC */
86 /* USBSTS: offset 0x04 */
87 u32 status;
88 #define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */
89 #define STS_ASS (1<<15) /* Async Schedule Status */
90 #define STS_PSS (1<<14) /* Periodic Schedule Status */
91 #define STS_RECL (1<<13) /* Reclamation */
92 #define STS_HALT (1<<12) /* Not running (any reason) */
93 /* some bits reserved */
94 /* these STS_* flags are also intr_enable bits (USBINTR) */
95 #define STS_IAA (1<<5) /* Interrupted on async advance */
96 #define STS_FATAL (1<<4) /* such as some PCI access errors */
97 #define STS_FLR (1<<3) /* frame list rolled over */
98 #define STS_PCD (1<<2) /* port change detect */
99 #define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
100 #define STS_INT (1<<0) /* "normal" completion (short, ...) */
102 /* USBINTR: offset 0x08 */
103 u32 intr_enable;
105 /* FRINDEX: offset 0x0C */
106 u32 frame_index; /* current microframe number */
107 /* CTRLDSSEGMENT: offset 0x10 */
108 u32 segment; /* address bits 63:32 if needed */
109 /* PERIODICLISTBASE: offset 0x14 */
110 u32 frame_list; /* points to periodic list */
111 /* ASYNCLISTADDR: offset 0x18 */
112 u32 async_next; /* address of next async queue head */
114 u32 reserved[9];
116 /* CONFIGFLAG: offset 0x40 */
117 u32 configured_flag;
118 #define FLAG_CF (1<<0) /* true: we'll support "high speed" */
120 /* PORTSC: offset 0x44 */
121 u32 port_status[0]; /* up to N_PORTS */
122 /* EHCI 1.1 addendum */
123 #define PORTSC_SUSPEND_STS_ACK 0
124 #define PORTSC_SUSPEND_STS_NYET 1
125 #define PORTSC_SUSPEND_STS_STALL 2
126 #define PORTSC_SUSPEND_STS_ERR 3
128 #define PORT_DEV_ADDR (0x7f<<25) /* device address */
129 #define PORT_SSTS (0x3<<23) /* suspend status */
130 /* 31:23 reserved */
131 #define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
132 #define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
133 #define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
134 /* 19:16 for port testing */
135 #define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */
136 #define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */
137 #define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */
138 #define PORT_LED_OFF (0<<14)
139 #define PORT_LED_AMBER (1<<14)
140 #define PORT_LED_GREEN (2<<14)
141 #define PORT_LED_MASK (3<<14)
142 #define PORT_OWNER (1<<13) /* true: companion hc owns this port */
143 #define PORT_POWER (1<<12) /* true: has power (see PPC) */
144 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
145 /* 11:10 for detecting lowspeed devices (reset vs release ownership) */
146 /* 9 reserved */
147 #define PORT_LPM (1<<9) /* LPM transaction */
148 #define PORT_RESET (1<<8) /* reset port */
149 #define PORT_SUSPEND (1<<7) /* suspend port */
150 #define PORT_RESUME (1<<6) /* resume it */
151 #define PORT_OCC (1<<5) /* over current change */
152 #define PORT_OC (1<<4) /* over current active */
153 #define PORT_PEC (1<<3) /* port enable change */
154 #define PORT_PE (1<<2) /* port enable */
155 #define PORT_CSC (1<<1) /* connect status change */
156 #define PORT_CONNECT (1<<0) /* device connected */
157 #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
160 #define USBMODE 0x68 /* USB Device mode */
161 #define USBMODE_SDIS (1<<3) /* Stream disable */
162 #define USBMODE_BE (1<<2) /* BE/LE endianness select */
163 #define USBMODE_CM_HC (3<<0) /* host controller mode */
164 #define USBMODE_CM_IDLE (0<<0) /* idle state */
166 /* Moorestown has some non-standard registers, partially due to the fact that
167 * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
168 * PORTSCx
170 #define HOSTPC0 0x84 /* HOSTPC extension */
171 #define HOSTPC_PHCD (1<<22) /* Phy clock disable */
172 #define HOSTPC_PSPD (3<<25) /* Port speed detection */
173 #define USBMODE_EX 0xc8 /* USB Device mode extension */
174 #define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */
175 #define USBMODE_EX_HC (3<<0) /* host controller mode */
176 #define TXFILLTUNING 0x24 /* TX FIFO Tuning register */
177 #define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */
179 /* Appendix C, Debug port ... intended for use with special "debug devices"
180 * that can help if there's no serial console. (nonstandard enumeration.)
182 struct ehci_dbg_port {
183 u32 control;
184 #define DBGP_OWNER (1<<30)
185 #define DBGP_ENABLED (1<<28)
186 #define DBGP_DONE (1<<16)
187 #define DBGP_INUSE (1<<10)
188 #define DBGP_ERRCODE(x) (((x)>>7)&0x07)
189 # define DBGP_ERR_BAD 1
190 # define DBGP_ERR_SIGNAL 2
191 #define DBGP_ERROR (1<<6)
192 #define DBGP_GO (1<<5)
193 #define DBGP_OUT (1<<4)
194 #define DBGP_LEN(x) (((x)>>0)&0x0f)
195 u32 pids;
196 #define DBGP_PID_GET(x) (((x)>>16)&0xff)
197 #define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
198 u32 data03;
199 u32 data47;
200 u32 address;
201 #define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
204 #ifdef CONFIG_EARLY_PRINTK_DBGP
205 #include <linux/init.h>
206 extern int __init early_dbgp_init(char *s);
207 extern struct console early_dbgp_console;
208 #endif /* CONFIG_EARLY_PRINTK_DBGP */
210 #ifdef CONFIG_EARLY_PRINTK_DBGP
211 /* Call backs from ehci host driver to ehci debug driver */
212 extern int dbgp_external_startup(void);
213 extern int dbgp_reset_prep(void);
214 #else
215 static inline int dbgp_reset_prep(void)
217 return 1;
219 static inline int dbgp_external_startup(void)
221 return -1;
223 #endif
225 #endif /* __LINUX_USB_EHCI_DEF_H */