include/asm-ppc/ibm_ocp.h

   1 /*
   2  * ibm_ocp.h
   3  *
   4  *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
   5  *          Mipsys - France
   6  *
   7  *          Derived from work (c) Armin Kuster akuster@pacbell.net
   8  *
   9  *          Additional support and port to 2.6 LDM/sysfs by
  10  *          Matt Porter <mporter@kernel.crashing.org>
  11  *          Copyright 2003-2004 MontaVista Software, Inc.
  12  *
  13  * This program is free software; you can redistribute  it and/or modify it
  14  * under  the terms of  the GNU General  Public License as published by the
  15  * Free Software Foundation;  either version 2 of the  License, or (at your
  16  * option) any later version.
  17  *
  18  */
  19 #ifdef __KERNEL__
  20 #ifndef __IBM_OCP_H__
  21 #define __IBM_OCP_H__
  22
  23 #include <asm/types.h>
  24
  25 /*
  26  * IBM 4xx OCP system information
  27  */
  28 struct ocp_sys_info_data {
  29         int     opb_bus_freq;   /* OPB Bus Frequency (Hz) */
  30         int     ebc_bus_freq;   /* EBC Bus Frequency (Hz) */
  31 };
  32
  33 extern struct ocp_sys_info_data ocp_sys_info;
  34
  35 /*
  36  * EMAC additional data and sysfs support
  37  *
  38  * Note about mdio_idx: When you have a zmii, it's usually
  39  * not necessary, it covers the case of the 405EP which has
  40  * the MDIO lines on EMAC0 only
  41  *
  42  * Note about phy_map: Per EMAC map of PHY ids which should
  43  * be probed by emac_probe. Different EMACs can have
  44  * overlapping maps.
  45  *
  46  * Note, this map uses inverse logic for bits:
  47  *  0 - id should be probed
  48  *  1 - id should be ignored
  49  *
  50  * Default value of 0x00000000 - will result in usual
  51  * auto-detection logic.
  52  *
  53  */
  54
  55 struct ocp_func_emac_data {
  56         int     rgmii_idx;      /* RGMII device index or -1 */
  57         int     rgmii_mux;      /* RGMII input of this EMAC */
  58         int     zmii_idx;       /* ZMII device index or -1 */
  59         int     zmii_mux;       /* ZMII input of this EMAC */
  60         int     mal_idx;        /* MAL device index */
  61         int     mal_rx_chan;    /* MAL rx channel number */
  62         int     mal_tx_chan;    /* MAL tx channel number */
  63         int     wol_irq;        /* WOL interrupt */
  64         int     mdio_idx;       /* EMAC idx of MDIO master or -1 */
  65         int     tah_idx;        /* TAH device index or -1 */
  66         int     jumbo;          /* Jumbo frames capable flag */
  67         int     phy_mode;       /* PHY type or configurable mode */
  68         u8      mac_addr[6];    /* EMAC mac address */
  69         u32     phy_map;        /* EMAC phy map */
  70         u32     phy_feat_exc;   /* Excluded PHY features */
  71 };
  72
  73 /* Sysfs support */
  74 #define OCP_SYSFS_EMAC_DATA()                                           \
  75 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx)     \
  76 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux)     \
  77 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx)      \
  78 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux)      \
  79 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx)       \
  80 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan)   \
  81 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan)   \
  82 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq)       \
  83 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx)      \
  84 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx)       \
  85 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode)      \
  86 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map)   \
  87 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_feat_exc)\
  88                                                                         \
  89 void ocp_show_emac_data(struct device *dev)                             \
  90 {                                                                       \
  91         device_create_file(dev, &dev_attr_emac_rgmii_idx);              \
  92         device_create_file(dev, &dev_attr_emac_rgmii_mux);              \
  93         device_create_file(dev, &dev_attr_emac_zmii_idx);               \
  94         device_create_file(dev, &dev_attr_emac_zmii_mux);               \
  95         device_create_file(dev, &dev_attr_emac_mal_idx);                \
  96         device_create_file(dev, &dev_attr_emac_mal_rx_chan);            \
  97         device_create_file(dev, &dev_attr_emac_mal_tx_chan);            \
  98         device_create_file(dev, &dev_attr_emac_wol_irq);                \
  99         device_create_file(dev, &dev_attr_emac_mdio_idx);               \
 100         device_create_file(dev, &dev_attr_emac_tah_idx);                \
 101         device_create_file(dev, &dev_attr_emac_phy_mode);               \
 102         device_create_file(dev, &dev_attr_emac_phy_map);                \
 103         device_create_file(dev, &dev_attr_emac_phy_feat_exc);           \
 104 }
 105
 106 /*
 107  * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY)
 108  */
 109 #define PHY_MODE_NA     0
 110 #define PHY_MODE_MII    1
 111 #define PHY_MODE_RMII   2
 112 #define PHY_MODE_SMII   3
 113 #define PHY_MODE_RGMII  4
 114 #define PHY_MODE_TBI    5
 115 #define PHY_MODE_GMII   6
 116 #define PHY_MODE_RTBI   7
 117 #define PHY_MODE_SGMII  8
 118
 119 #ifdef CONFIG_40x
 120 /*
 121  * Helper function to copy MAC addresses from the bd_t to OCP EMAC
 122  * additions.
 123  *
 124  * The range of EMAC indices (inclusive) to be copied are the arguments.
 125  */
 126 static inline void ibm_ocp_set_emac(int start, int end)
 127 {
 128         int i;
 129         struct ocp_def *def;
 130
 131         /* Copy MAC addresses to EMAC additions */
 132         for (i=start; i<=end; i++) {
 133                 def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
 134                 if (i == 0)
 135                         memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
 136                                __res.bi_enetaddr, 6);
 137 #if defined(CONFIG_405EP) || defined(CONFIG_44x)
 138                 else if (i == 1)
 139                         memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
 140                                __res.bi_enet1addr, 6);
 141 #endif
 142 #if defined(CONFIG_440GX)
 143                 else if (i == 2)
 144                         memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
 145                                __res.bi_enet2addr, 6);
 146                 else if (i == 3)
 147                         memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
 148                                __res.bi_enet3addr, 6);
 149 #endif
 150         }
 151 }
 152 #endif
 153
 154 /*
 155  * MAL additional data and sysfs support
 156  */
 157 struct ocp_func_mal_data {
 158         int     num_tx_chans;   /* Number of TX channels */
 159         int     num_rx_chans;   /* Number of RX channels */
 160         int     txeob_irq;      /* TX End Of Buffer IRQ  */
 161         int     rxeob_irq;      /* RX End Of Buffer IRQ  */
 162         int     txde_irq;       /* TX Descriptor Error IRQ */
 163         int     rxde_irq;       /* RX Descriptor Error IRQ */
 164         int     serr_irq;       /* MAL System Error IRQ    */
 165         int     dcr_base;       /* MALx_CFG DCR number   */
 166 };
 167
 168 #define OCP_SYSFS_MAL_DATA()                                            \
 169 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans)    \
 170 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans)    \
 171 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq)       \
 172 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq)       \
 173 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq)        \
 174 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq)        \
 175 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq)        \
 176 OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base)        \
 177                                                                         \
 178 void ocp_show_mal_data(struct device *dev)                              \
 179 {                                                                       \
 180         device_create_file(dev, &dev_attr_mal_num_tx_chans);            \
 181         device_create_file(dev, &dev_attr_mal_num_rx_chans);            \
 182         device_create_file(dev, &dev_attr_mal_txeob_irq);               \
 183         device_create_file(dev, &dev_attr_mal_rxeob_irq);               \
 184         device_create_file(dev, &dev_attr_mal_txde_irq);                \
 185         device_create_file(dev, &dev_attr_mal_rxde_irq);                \
 186         device_create_file(dev, &dev_attr_mal_serr_irq);                \
 187         device_create_file(dev, &dev_attr_mal_dcr_base);                \
 188 }
 189
 190 /*
 191  * IIC additional data and sysfs support
 192  */
 193 struct ocp_func_iic_data {
 194         int     fast_mode;      /* IIC fast mode enabled */
 195 };
 196
 197 #define OCP_SYSFS_IIC_DATA()                                            \
 198 OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode)       \
 199                                                                         \
 200 void ocp_show_iic_data(struct device *dev)                              \
 201 {                                                                       \
 202         device_create_file(dev, &dev_attr_iic_fast_mode);               \
 203 }
 204 #endif /* __IBM_OCP_H__ */
 205 #endif /* __KERNEL__ */