drivers/mtd/maps/dmv182.c

   1
   2 /*
   3  * drivers/mtd/maps/svme182.c
   4  *
   5  * Flash map driver for the Dy4 SVME182 board
   6  *
   7  * $Id: dmv182.c,v 1.6 2005/11/07 11:14:26 gleixner Exp $
   8  *
   9  * Copyright 2003-2004, TimeSys Corporation
  10  *
  11  * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
  12  *
  13  * This program is free software; you can redistribute  it and/or modify it
  14  * under  the terms of  the GNU General  Public License as published by the
  15  * Free Software Foundation;  either version 2 of the  License, or (at your
  16  * option) any later version.
  17  */
  18
  19 #include <linux/config.h>
  20 #include <linux/module.h>
  21 #include <linux/init.h>
  22 #include <linux/types.h>
  23 #include <linux/kernel.h>
  24 #include <asm/io.h>
  25 #include <linux/mtd/mtd.h>
  26 #include <linux/mtd/map.h>
  27 #include <linux/mtd/partitions.h>
  28 #include <linux/errno.h>
  29
  30 /*
  31  * This driver currently handles only the 16MiB user flash bank 1 on the
  32  * board.  It does not provide access to bank 0 (contains the Dy4 FFW), bank 2
  33  * (VxWorks boot), or the optional 48MiB expansion flash.
  34  *
  35  * scott.wood@timesys.com: On the newer boards with 128MiB flash, it
  36  * now supports the first 96MiB (the boot flash bank containing FFW
  37  * is excluded).  The VxWorks loader is in partition 1.
  38  */
  39
  40 #define FLASH_BASE_ADDR 0xf0000000
  41 #define FLASH_BANK_SIZE (128*1024*1024)
  42
  43 MODULE_AUTHOR("Scott Wood, TimeSys Corporation <scott.wood@timesys.com>");
  44 MODULE_DESCRIPTION("User-programmable flash device on the Dy4 SVME182 board");
  45 MODULE_LICENSE("GPL");
  46
  47 static struct map_info svme182_map = {
  48         .name           = "Dy4 SVME182",
  49         .bankwidth      = 32,
  50         .size           =  128 * 1024 * 1024
  51 };
  52
  53 #define BOOTIMAGE_PART_SIZE             ((6*1024*1024)-RESERVED_PART_SIZE)
  54
  55 // Allow 6MiB for the kernel
  56 #define NEW_BOOTIMAGE_PART_SIZE  (6 * 1024 * 1024)
  57 // Allow 1MiB for the bootloader
  58 #define NEW_BOOTLOADER_PART_SIZE (1024 * 1024)
  59 // Use the remaining 9MiB at the end of flash for the RFS
  60 #define NEW_RFS_PART_SIZE        (0x01000000 - NEW_BOOTLOADER_PART_SIZE - \
  61                                   NEW_BOOTIMAGE_PART_SIZE)
  62
  63 static struct mtd_partition svme182_partitions[] = {
  64         // The Lower PABS is only 128KiB, but the partition code doesn't
  65         // like partitions that don't end on the largest erase block
  66         // size of the device, even if all of the erase blocks in the
  67         // partition are small ones.  The hardware should prevent
  68         // writes to the actual PABS areas.
  69         {
  70                 name:       "Lower PABS and CPU 0 bootloader or kernel",
  71                 size:       6*1024*1024,
  72                 offset:     0,
  73         },
  74         {
  75                 name:       "Root Filesystem",
  76                 size:       10*1024*1024,
  77                 offset:     MTDPART_OFS_NXTBLK
  78         },
  79         {
  80                 name:       "CPU1 Bootloader",
  81                 size:       1024*1024,
  82                 offset:     MTDPART_OFS_NXTBLK,
  83         },
  84         {
  85                 name:       "Extra",
  86                 size:       110*1024*1024,
  87                 offset:     MTDPART_OFS_NXTBLK
  88         },
  89         {
  90                 name:       "Foundation Firmware and Upper PABS",
  91                 size:       1024*1024,
  92                 offset:     MTDPART_OFS_NXTBLK,
  93                 mask_flags: MTD_WRITEABLE // read-only
  94         }
  95 };
  96
  97 static struct mtd_info *this_mtd;
  98
  99 static int __init init_svme182(void)
 100 {
 101         struct mtd_partition *partitions;
 102         int num_parts = sizeof(svme182_partitions) / sizeof(struct mtd_partition);
 103
 104         partitions = svme182_partitions;
 105
 106         svme182_map.virt = ioremap(FLASH_BASE_ADDR, svme182_map.size);
 107
 108         if (svme182_map.virt == 0) {
 109                 printk("Failed to ioremap FLASH memory area.\n");
 110                 return -EIO;
 111         }
 112
 113         simple_map_init(&svme182_map);
 114
 115         this_mtd = do_map_probe("cfi_probe", &svme182_map);
 116         if (!this_mtd)
 117         {
 118                 iounmap((void *)svme182_map.virt);
 119                 return -ENXIO;
 120         }
 121
 122         printk(KERN_NOTICE "SVME182 flash device: %dMiB at 0x%08x\n",
 123                    this_mtd->size >> 20, FLASH_BASE_ADDR);
 124
 125         this_mtd->owner = THIS_MODULE;
 126         add_mtd_partitions(this_mtd, partitions, num_parts);
 127
 128         return 0;
 129 }
 130
 131 static void __exit cleanup_svme182(void)
 132 {
 133         if (this_mtd)
 134         {
 135                 del_mtd_partitions(this_mtd);
 136                 map_destroy(this_mtd);
 137         }
 138
 139         if (svme182_map.virt)
 140         {
 141                 iounmap((void *)svme182_map.virt);
 142                 svme182_map.virt = 0;
 143         }
 144
 145         return;
 146 }
 147
 148 module_init(init_svme182);
 149 module_exit(cleanup_svme182);