arch/x86/kernel/cpu/cpufreq/elanfreq.c

   1 /*
   2  *      elanfreq:       cpufreq driver for the AMD ELAN family
   3  *
   4  *      (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
   5  *
   6  *      Parts of this code are (c) Sven Geggus <sven@geggus.net>
   7  *
   8  *      All Rights Reserved.
   9  *
  10  *      This program is free software; you can redistribute it and/or
  11  *      modify it under the terms of the GNU General Public License
  12  *      as published by the Free Software Foundation; either version
  13  *      2 of the License, or (at your option) any later version.
  14  *
  15  *      2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
  16  *
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/init.h>
  22
  23 #include <linux/slab.h>
  24 #include <linux/delay.h>
  25 #include <linux/cpufreq.h>
  26
  27 #include <asm/msr.h>
  28 #include <asm/timex.h>
  29 #include <asm/io.h>
  30
  31 #define REG_CSCIR 0x22          /* Chip Setup and Control Index Register    */
  32 #define REG_CSCDR 0x23          /* Chip Setup and Control Data  Register    */
  33
  34 /* Module parameter */
  35 static int max_freq;
  36
  37 struct s_elan_multiplier {
  38         int clock;              /* frequency in kHz                         */
  39         int val40h;             /* PMU Force Mode register                  */
  40         int val80h;             /* CPU Clock Speed Register                 */
  41 };
  42
  43 /*
  44  * It is important that the frequencies
  45  * are listed in ascending order here!
  46  */
  47 struct s_elan_multiplier elan_multiplier[] = {
  48         {1000,  0x02,   0x18},
  49         {2000,  0x02,   0x10},
  50         {4000,  0x02,   0x08},
  51         {8000,  0x00,   0x00},
  52         {16000, 0x00,   0x02},
  53         {33000, 0x00,   0x04},
  54         {66000, 0x01,   0x04},
  55         {99000, 0x01,   0x05}
  56 };
  57
  58 static struct cpufreq_frequency_table elanfreq_table[] = {
  59         {0,     1000},
  60         {1,     2000},
  61         {2,     4000},
  62         {3,     8000},
  63         {4,     16000},
  64         {5,     33000},
  65         {6,     66000},
  66         {7,     99000},
  67         {0,     CPUFREQ_TABLE_END},
  68 };
  69
  70
  71 /**
  72  *      elanfreq_get_cpu_frequency: determine current cpu speed
  73  *
  74  *      Finds out at which frequency the CPU of the Elan SOC runs
  75  *      at the moment. Frequencies from 1 to 33 MHz are generated
  76  *      the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
  77  *      and have the rest of the chip running with 33 MHz.
  78  */
  79
  80 static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
  81 {
  82         u8 clockspeed_reg;    /* Clock Speed Register */
  83
  84         local_irq_disable();
  85         outb_p(0x80,REG_CSCIR);
  86         clockspeed_reg = inb_p(REG_CSCDR);
  87         local_irq_enable();
  88
  89         if ((clockspeed_reg & 0xE0) == 0xE0)
  90                 return 0;
  91
  92         /* Are we in CPU clock multiplied mode (66/99 MHz)? */
  93         if ((clockspeed_reg & 0xE0) == 0xC0) {
  94                 if ((clockspeed_reg & 0x01) == 0)
  95                         return 66000;
  96                 else
  97                         return 99000;
  98         }
  99
 100         /* 33 MHz is not 32 MHz... */
 101         if ((clockspeed_reg & 0xE0)==0xA0)
 102                 return 33000;
 103
 104         return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
 105 }
 106
 107
 108 /**
 109  *      elanfreq_set_cpu_frequency: Change the CPU core frequency
 110  *      @cpu: cpu number
 111  *      @freq: frequency in kHz
 112  *
 113  *      This function takes a frequency value and changes the CPU frequency
 114  *      according to this. Note that the frequency has to be checked by
 115  *      elanfreq_validatespeed() for correctness!
 116  *
 117  *      There is no return value.
 118  */
 119
 120 static void elanfreq_set_cpu_state (unsigned int state)
 121 {
 122         struct cpufreq_freqs    freqs;
 123
 124         freqs.old = elanfreq_get_cpu_frequency(0);
 125         freqs.new = elan_multiplier[state].clock;
 126         freqs.cpu = 0; /* elanfreq.c is UP only driver */
 127
 128         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 129
 130         printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
 131                         elan_multiplier[state].clock);
 132
 133
 134         /*
 135          * Access to the Elan's internal registers is indexed via
 136          * 0x22: Chip Setup & Control Register Index Register (CSCI)
 137          * 0x23: Chip Setup & Control Register Data  Register (CSCD)
 138          *
 139          */
 140
 141         /*
 142          * 0x40 is the Power Management Unit's Force Mode Register.
 143          * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
 144          */
 145
 146         local_irq_disable();
 147         outb_p(0x40,REG_CSCIR);         /* Disable hyperspeed mode */
 148         outb_p(0x00,REG_CSCDR);
 149         local_irq_enable();             /* wait till internal pipelines and */
 150         udelay(1000);                   /* buffers have cleaned up          */
 151
 152         local_irq_disable();
 153
 154         /* now, set the CPU clock speed register (0x80) */
 155         outb_p(0x80,REG_CSCIR);
 156         outb_p(elan_multiplier[state].val80h,REG_CSCDR);
 157
 158         /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
 159         outb_p(0x40,REG_CSCIR);
 160         outb_p(elan_multiplier[state].val40h,REG_CSCDR);
 161         udelay(10000);
 162         local_irq_enable();
 163
 164         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 165 };
 166
 167
 168 /**
 169  *      elanfreq_validatespeed: test if frequency range is valid
 170  *      @policy: the policy to validate
 171  *
 172  *      This function checks if a given frequency range in kHz is valid
 173  *      for the hardware supported by the driver.
 174  */
 175
 176 static int elanfreq_verify (struct cpufreq_policy *policy)
 177 {
 178         return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
 179 }
 180
 181 static int elanfreq_target (struct cpufreq_policy *policy,
 182                             unsigned int target_freq,
 183                             unsigned int relation)
 184 {
 185         unsigned int newstate = 0;
 186
 187         if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
 188                 return -EINVAL;
 189
 190         elanfreq_set_cpu_state(newstate);
 191
 192         return 0;
 193 }
 194
 195
 196 /*
 197  *      Module init and exit code
 198  */
 199
 200 static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 201 {
 202         struct cpuinfo_x86 *c = &cpu_data(0);
 203         unsigned int i;
 204         int result;
 205
 206         /* capability check */
 207         if ((c->x86_vendor != X86_VENDOR_AMD) ||
 208             (c->x86 != 4) || (c->x86_model!=10))
 209                 return -ENODEV;
 210
 211         /* max freq */
 212         if (!max_freq)
 213                 max_freq = elanfreq_get_cpu_frequency(0);
 214
 215         /* table init */
 216         for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
 217                 if (elanfreq_table[i].frequency > max_freq)
 218                         elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 219         }
 220
 221         /* cpuinfo and default policy values */
 222         policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 223         policy->cur = elanfreq_get_cpu_frequency(0);
 224
 225         result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
 226         if (result)
 227                 return (result);
 228
 229         cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
 230         return 0;
 231 }
 232
 233
 234 static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
 235 {
 236         cpufreq_frequency_table_put_attr(policy->cpu);
 237         return 0;
 238 }
 239
 240
 241 #ifndef MODULE
 242 /**
 243  * elanfreq_setup - elanfreq command line parameter parsing
 244  *
 245  * elanfreq command line parameter.  Use:
 246  *  elanfreq=66000
 247  * to set the maximum CPU frequency to 66 MHz. Note that in
 248  * case you do not give this boot parameter, the maximum
 249  * frequency will fall back to _current_ CPU frequency which
 250  * might be lower. If you build this as a module, use the
 251  * max_freq module parameter instead.
 252  */
 253 static int __init elanfreq_setup(char *str)
 254 {
 255         max_freq = simple_strtoul(str, &str, 0);
 256         printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
 257         return 1;
 258 }
 259 __setup("elanfreq=", elanfreq_setup);
 260 #endif
 261
 262
 263 static struct freq_attr* elanfreq_attr[] = {
 264         &cpufreq_freq_attr_scaling_available_freqs,
 265         NULL,
 266 };
 267
 268
 269 static struct cpufreq_driver elanfreq_driver = {
 270         .get            = elanfreq_get_cpu_frequency,
 271         .verify         = elanfreq_verify,
 272         .target         = elanfreq_target,
 273         .init           = elanfreq_cpu_init,
 274         .exit           = elanfreq_cpu_exit,
 275         .name           = "elanfreq",
 276         .owner          = THIS_MODULE,
 277         .attr           = elanfreq_attr,
 278 };
 279
 280
 281 static int __init elanfreq_init(void)
 282 {
 283         struct cpuinfo_x86 *c = &cpu_data(0);
 284
 285         /* Test if we have the right hardware */
 286         if ((c->x86_vendor != X86_VENDOR_AMD) ||
 287                 (c->x86 != 4) || (c->x86_model!=10)) {
 288                 printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
 289                 return -ENODEV;
 290         }
 291         return cpufreq_register_driver(&elanfreq_driver);
 292 }
 293
 294
 295 static void __exit elanfreq_exit(void)
 296 {
 297         cpufreq_unregister_driver(&elanfreq_driver);
 298 }
 299
 300
 301 module_param (max_freq, int, 0444);
 302
 303 MODULE_LICENSE("GPL");
 304 MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
 305 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
 306
 307 module_init(elanfreq_init);
 308 module_exit(elanfreq_exit);