?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
pcmcia: CompactFlash driver for PA Semi Electra boards
[pv_ops_mirror.git] / drivers / ide / pci / cmd64x.c
blobf3d3bde8daba7596436de42b00df10de31fd32df
1 /*
2 * linux/drivers/ide/pci/cmd64x.c Version 1.50 May 10, 2007
3 *
4 * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
5 * Due to massive hardware bugs, UltraDMA is only supported
6 * on the 646U2 and not on the 646U.
7 *
8 * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
9 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
10 *
11 * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
12 * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
13 */
14
15 #include <linux/module.h>
16 #include <linux/types.h>
17 #include <linux/pci.h>
18 #include <linux/delay.h>
19 #include <linux/hdreg.h>
20 #include <linux/ide.h>
21 #include <linux/init.h>
22
23 #include <asm/io.h>
24
25 #define DISPLAY_CMD64X_TIMINGS
26
27 #define CMD_DEBUG 0
28
29 #if CMD_DEBUG
30 #define cmdprintk(x...) printk(x)
31 #else
32 #define cmdprintk(x...)
33 #endif
34
35 /*
36 * CMD64x specific registers definition.
37 */
38 #define CFR 0x50
39 #define CFR_INTR_CH0 0x04
40 #define CNTRL 0x51
41 #define CNTRL_ENA_1ST 0x04
42 #define CNTRL_ENA_2ND 0x08
43 #define CNTRL_DIS_RA0 0x40
44 #define CNTRL_DIS_RA1 0x80
45
46 #define CMDTIM 0x52
47 #define ARTTIM0 0x53
48 #define DRWTIM0 0x54
49 #define ARTTIM1 0x55
50 #define DRWTIM1 0x56
51 #define ARTTIM23 0x57
52 #define ARTTIM23_DIS_RA2 0x04
53 #define ARTTIM23_DIS_RA3 0x08
54 #define ARTTIM23_INTR_CH1 0x10
55 #define DRWTIM2 0x58
56 #define BRST 0x59
57 #define DRWTIM3 0x5b
58
59 #define BMIDECR0 0x70
60 #define MRDMODE 0x71
61 #define MRDMODE_INTR_CH0 0x04
62 #define MRDMODE_INTR_CH1 0x08
63 #define MRDMODE_BLK_CH0 0x10
64 #define MRDMODE_BLK_CH1 0x20
65 #define BMIDESR0 0x72
66 #define UDIDETCR0 0x73
67 #define DTPR0 0x74
68 #define BMIDECR1 0x78
69 #define BMIDECSR 0x79
70 #define BMIDESR1 0x7A
71 #define UDIDETCR1 0x7B
72 #define DTPR1 0x7C
73
74 #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
75 #include <linux/stat.h>
76 #include <linux/proc_fs.h>
77
78 static u8 cmd64x_proc = 0;
79
80 #define CMD_MAX_DEVS 5
81
82 static struct pci_dev *cmd_devs[CMD_MAX_DEVS];
83 static int n_cmd_devs;
84
85 static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index)
86 {
87 char *p = buf;
88 u8 reg72 = 0, reg73 = 0; /* primary */
89 u8 reg7a = 0, reg7b = 0; /* secondary */
90 u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */
91
92 p += sprintf(p, "\nController: %d\n", index);
93 p += sprintf(p, "PCI-%x Chipset.\n", dev->device);
94
95 (void) pci_read_config_byte(dev, CFR, &reg50);
96 (void) pci_read_config_byte(dev, CNTRL, &reg51);
97 (void) pci_read_config_byte(dev, ARTTIM23, &reg57);
98 (void) pci_read_config_byte(dev, MRDMODE, &reg71);
99 (void) pci_read_config_byte(dev, BMIDESR0, &reg72);
100 (void) pci_read_config_byte(dev, UDIDETCR0, &reg73);
101 (void) pci_read_config_byte(dev, BMIDESR1, &reg7a);
102 (void) pci_read_config_byte(dev, UDIDETCR1, &reg7b);
103
104 /* PCI0643/6 originally didn't have the primary channel enable bit */
105 if ((dev->device == PCI_DEVICE_ID_CMD_643) ||
106 (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3))
107 reg51 |= CNTRL_ENA_1ST;
108
109 p += sprintf(p, "---------------- Primary Channel "
110 "---------------- Secondary Channel ------------\n");
111 p += sprintf(p, " %s %s\n",
112 (reg51 & CNTRL_ENA_1ST) ? "enabled " : "disabled",
113 (reg51 & CNTRL_ENA_2ND) ? "enabled " : "disabled");
114 p += sprintf(p, "---------------- drive0 --------- drive1 "
115 "-------- drive0 --------- drive1 ------\n");
116 p += sprintf(p, "DMA enabled: %s %s"
117 " %s %s\n",
118 (reg72 & 0x20) ? "yes" : "no ", (reg72 & 0x40) ? "yes" : "no ",
119 (reg7a & 0x20) ? "yes" : "no ", (reg7a & 0x40) ? "yes" : "no ");
120 p += sprintf(p, "UltraDMA mode: %s (%c) %s (%c)",
121 ( reg73 & 0x01) ? " on" : "off",
122 ((reg73 & 0x30) == 0x30) ? ((reg73 & 0x04) ? '3' : '0') :
123 ((reg73 & 0x30) == 0x20) ? ((reg73 & 0x04) ? '3' : '1') :
124 ((reg73 & 0x30) == 0x10) ? ((reg73 & 0x04) ? '4' : '2') :
125 ((reg73 & 0x30) == 0x00) ? ((reg73 & 0x04) ? '5' : '2') : '?',
126 ( reg73 & 0x02) ? " on" : "off",
127 ((reg73 & 0xC0) == 0xC0) ? ((reg73 & 0x08) ? '3' : '0') :
128 ((reg73 & 0xC0) == 0x80) ? ((reg73 & 0x08) ? '3' : '1') :
129 ((reg73 & 0xC0) == 0x40) ? ((reg73 & 0x08) ? '4' : '2') :
130 ((reg73 & 0xC0) == 0x00) ? ((reg73 & 0x08) ? '5' : '2') : '?');
131 p += sprintf(p, " %s (%c) %s (%c)\n",
132 ( reg7b & 0x01) ? " on" : "off",
133 ((reg7b & 0x30) == 0x30) ? ((reg7b & 0x04) ? '3' : '0') :
134 ((reg7b & 0x30) == 0x20) ? ((reg7b & 0x04) ? '3' : '1') :
135 ((reg7b & 0x30) == 0x10) ? ((reg7b & 0x04) ? '4' : '2') :
136 ((reg7b & 0x30) == 0x00) ? ((reg7b & 0x04) ? '5' : '2') : '?',
137 ( reg7b & 0x02) ? " on" : "off",
138 ((reg7b & 0xC0) == 0xC0) ? ((reg7b & 0x08) ? '3' : '0') :
139 ((reg7b & 0xC0) == 0x80) ? ((reg7b & 0x08) ? '3' : '1') :
140 ((reg7b & 0xC0) == 0x40) ? ((reg7b & 0x08) ? '4' : '2') :
141 ((reg7b & 0xC0) == 0x00) ? ((reg7b & 0x08) ? '5' : '2') : '?');
142 p += sprintf(p, "Interrupt: %s, %s %s, %s\n",
143 (reg71 & MRDMODE_BLK_CH0 ) ? "blocked" : "enabled",
144 (reg50 & CFR_INTR_CH0 ) ? "pending" : "clear ",
145 (reg71 & MRDMODE_BLK_CH1 ) ? "blocked" : "enabled",
146 (reg57 & ARTTIM23_INTR_CH1) ? "pending" : "clear ");
147
148 return (char *)p;
149 }
150
151 static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count)
152 {
153 char *p = buffer;
154 int i;
155
156 for (i = 0; i < n_cmd_devs; i++) {
157 struct pci_dev *dev = cmd_devs[i];
158 p = print_cmd64x_get_info(p, dev, i);
159 }
160 return p-buffer; /* => must be less than 4k! */
161 }
162
163 #endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */
164
165 static u8 quantize_timing(int timing, int quant)
166 {
167 return (timing + quant - 1) / quant;
168 }
169
170 /*
171 * This routine calculates active/recovery counts and then writes them into
172 * the chipset registers.
173 */
174 static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
175 {
176 struct pci_dev *dev = HWIF(drive)->pci_dev;
177 int clock_time = 1000 / system_bus_clock();
178 u8 cycle_count, active_count, recovery_count, drwtim;
179 static const u8 recovery_values[] =
180 {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
181 static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
182
183 cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
184 cycle_time, active_time);
185
186 cycle_count = quantize_timing( cycle_time, clock_time);
187 active_count = quantize_timing(active_time, clock_time);
188 recovery_count = cycle_count - active_count;
189
190 /*
191 * In case we've got too long recovery phase, try to lengthen
192 * the active phase
193 */
194 if (recovery_count > 16) {
195 active_count += recovery_count - 16;
196 recovery_count = 16;
197 }
198 if (active_count > 16) /* shouldn't actually happen... */
199 active_count = 16;
200
201 cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
202 cycle_count, active_count, recovery_count);
203
204 /*
205 * Convert values to internal chipset representation
206 */
207 recovery_count = recovery_values[recovery_count];
208 active_count &= 0x0f;
209
210 /* Program the active/recovery counts into the DRWTIM register */
211 drwtim = (active_count << 4) | recovery_count;
212 (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
213 cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
214 }
215
216 /*
217 * This routine writes into the chipset registers
218 * PIO setup/active/recovery timings.
219 */
220 static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
221 {
222 ide_hwif_t *hwif = HWIF(drive);
223 struct pci_dev *dev = hwif->pci_dev;
224 unsigned int cycle_time;
225 u8 setup_count, arttim = 0;
226
227 static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
228 static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
229
230 cycle_time = ide_pio_cycle_time(drive, pio);
231
232 program_cycle_times(drive, cycle_time,
233 ide_pio_timings[pio].active_time);
234
235 setup_count = quantize_timing(ide_pio_timings[pio].setup_time,
236 1000 / system_bus_clock());
237
238 /*
239 * The primary channel has individual address setup timing registers
240 * for each drive and the hardware selects the slowest timing itself.
241 * The secondary channel has one common register and we have to select
242 * the slowest address setup timing ourselves.
243 */
244 if (hwif->channel) {
245 ide_drive_t *drives = hwif->drives;
246
247 drive->drive_data = setup_count;
248 setup_count = max(drives[0].drive_data, drives[1].drive_data);
249 }
250
251 if (setup_count > 5) /* shouldn't actually happen... */
252 setup_count = 5;
253 cmdprintk("Final address setup count: %d\n", setup_count);
254
255 /*
256 * Program the address setup clocks into the ARTTIM registers.
257 * Avoid clearing the secondary channel's interrupt bit.
258 */
259 (void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim);
260 if (hwif->channel)
261 arttim &= ~ARTTIM23_INTR_CH1;
262 arttim &= ~0xc0;
263 arttim |= setup_values[setup_count];
264 (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
265 cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
266 }
267
268 /*
269 * Attempts to set drive's PIO mode.
270 * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
271 */
272
273 static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
274 {
275 /*
276 * Filter out the prefetch control values
277 * to prevent PIO5 from being programmed
278 */
279 if (pio == 8 || pio == 9)
280 return;
281
282 cmd64x_tune_pio(drive, pio);
283 }
284
285 static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
286 {
287 ide_hwif_t *hwif = HWIF(drive);
288 struct pci_dev *dev = hwif->pci_dev;
289 u8 unit = drive->dn & 0x01;
290 u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
291
292 if (speed >= XFER_SW_DMA_0) {
293 (void) pci_read_config_byte(dev, pciU, &regU);
294 regU &= ~(unit ? 0xCA : 0x35);
295 }
296
297 switch(speed) {
298 case XFER_UDMA_5:
299 regU |= unit ? 0x0A : 0x05;
300 break;
301 case XFER_UDMA_4:
302 regU |= unit ? 0x4A : 0x15;
303 break;
304 case XFER_UDMA_3:
305 regU |= unit ? 0x8A : 0x25;
306 break;
307 case XFER_UDMA_2:
308 regU |= unit ? 0x42 : 0x11;
309 break;
310 case XFER_UDMA_1:
311 regU |= unit ? 0x82 : 0x21;
312 break;
313 case XFER_UDMA_0:
314 regU |= unit ? 0xC2 : 0x31;
315 break;
316 case XFER_MW_DMA_2:
317 program_cycle_times(drive, 120, 70);
318 break;
319 case XFER_MW_DMA_1:
320 program_cycle_times(drive, 150, 80);
321 break;
322 case XFER_MW_DMA_0:
323 program_cycle_times(drive, 480, 215);
324 break;
325 default:
326 return;
327 }
328
329 if (speed >= XFER_SW_DMA_0)
330 (void) pci_write_config_byte(dev, pciU, regU);
331 }
332
333 static int cmd648_ide_dma_end (ide_drive_t *drive)
334 {
335 ide_hwif_t *hwif = HWIF(drive);
336 int err = __ide_dma_end(drive);
337 u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
338 MRDMODE_INTR_CH0;
339 u8 mrdmode = inb(hwif->dma_master + 0x01);
340
341 /* clear the interrupt bit */
342 outb(mrdmode | irq_mask, hwif->dma_master + 0x01);
343
344 return err;
345 }
346
347 static int cmd64x_ide_dma_end (ide_drive_t *drive)
348 {
349 ide_hwif_t *hwif = HWIF(drive);
350 struct pci_dev *dev = hwif->pci_dev;
351 int irq_reg = hwif->channel ? ARTTIM23 : CFR;
352 u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
353 CFR_INTR_CH0;
354 u8 irq_stat = 0;
355 int err = __ide_dma_end(drive);
356
357 (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
358 /* clear the interrupt bit */
359 (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
360
361 return err;
362 }
363
364 static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
365 {
366 ide_hwif_t *hwif = HWIF(drive);
367 u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
368 MRDMODE_INTR_CH0;
369 u8 dma_stat = inb(hwif->dma_status);
370 u8 mrdmode = inb(hwif->dma_master + 0x01);
371
372 #ifdef DEBUG
373 printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
374 drive->name, dma_stat, mrdmode, irq_mask);
375 #endif
376 if (!(mrdmode & irq_mask))
377 return 0;
378
379 /* return 1 if INTR asserted */
380 if (dma_stat & 4)
381 return 1;
382
383 return 0;
384 }
385
386 static int cmd64x_ide_dma_test_irq (ide_drive_t *drive)
387 {
388 ide_hwif_t *hwif = HWIF(drive);
389 struct pci_dev *dev = hwif->pci_dev;
390 int irq_reg = hwif->channel ? ARTTIM23 : CFR;
391 u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
392 CFR_INTR_CH0;
393 u8 dma_stat = inb(hwif->dma_status);
394 u8 irq_stat = 0;
395
396 (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
397
398 #ifdef DEBUG
399 printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n",
400 drive->name, dma_stat, irq_stat, irq_mask);
401 #endif
402 if (!(irq_stat & irq_mask))
403 return 0;
404
405 /* return 1 if INTR asserted */
406 if (dma_stat & 4)
407 return 1;
408
409 return 0;
410 }
411
412 /*
413 * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
414 * event order for DMA transfers.
415 */
416
417 static int cmd646_1_ide_dma_end (ide_drive_t *drive)
418 {
419 ide_hwif_t *hwif = HWIF(drive);
420 u8 dma_stat = 0, dma_cmd = 0;
421
422 drive->waiting_for_dma = 0;
423 /* get DMA status */
424 dma_stat = inb(hwif->dma_status);
425 /* read DMA command state */
426 dma_cmd = inb(hwif->dma_command);
427 /* stop DMA */
428 outb(dma_cmd & ~1, hwif->dma_command);
429 /* clear the INTR & ERROR bits */
430 outb(dma_stat | 6, hwif->dma_status);
431 /* and free any DMA resources */
432 ide_destroy_dmatable(drive);
433 /* verify good DMA status */
434 return (dma_stat & 7) != 4;
435 }
436
437 static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
438 {
439 u8 mrdmode = 0;
440
441 if (dev->device == PCI_DEVICE_ID_CMD_646) {
442 u8 rev = 0;
443
444 pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
445
446 switch (rev) {
447 case 0x07:
448 case 0x05:
449 printk("%s: UltraDMA capable\n", name);
450 break;
451 case 0x03:
452 default:
453 printk("%s: MultiWord DMA force limited\n", name);
454 break;
455 case 0x01:
456 printk("%s: MultiWord DMA limited, "
457 "IRQ workaround enabled\n", name);
458 break;
459 }
460 }
461
462 /* Set a good latency timer and cache line size value. */
463 (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
464 /* FIXME: pci_set_master() to ensure a good latency timer value */
465
466 /*
467 * Enable interrupts, select MEMORY READ LINE for reads.
468 *
469 * NOTE: although not mentioned in the PCI0646U specs,
470 * bits 0-1 are write only and won't be read back as
471 * set or not -- PCI0646U2 specs clarify this point.
472 */
473 (void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
474 mrdmode &= ~0x30;
475 (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
476
477 #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
478
479 cmd_devs[n_cmd_devs++] = dev;
480
481 if (!cmd64x_proc) {
482 cmd64x_proc = 1;
483 ide_pci_create_host_proc("cmd64x", cmd64x_get_info);
484 }
485 #endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_IDE_PROC_FS */
486
487 return 0;
488 }
489
490 static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
491 {
492 struct pci_dev *dev = hwif->pci_dev;
493 u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
494
495 switch (dev->device) {
496 case PCI_DEVICE_ID_CMD_648:
497 case PCI_DEVICE_ID_CMD_649:
498 pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
499 return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
500 default:
501 return ATA_CBL_PATA40;
502 }
503 }
504
505 static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
506 {
507 struct pci_dev *dev = hwif->pci_dev;
508 u8 rev = 0;
509
510 pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
511
512 hwif->set_pio_mode = &cmd64x_set_pio_mode;
513 hwif->set_dma_mode = &cmd64x_set_dma_mode;
514
515 hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
516
517 if (!hwif->dma_base)
518 return;
519
520 hwif->atapi_dma = 1;
521 hwif->mwdma_mask = 0x07;
522 hwif->ultra_mask = hwif->cds->udma_mask;
523
524 /*
525 * UltraDMA only supported on PCI646U and PCI646U2, which
526 * correspond to revisions 0x03, 0x05 and 0x07 respectively.
527 * Actually, although the CMD tech support people won't
528 * tell me the details, the 0x03 revision cannot support
529 * UDMA correctly without hardware modifications, and even
530 * then it only works with Quantum disks due to some
531 * hold time assumptions in the 646U part which are fixed
532 * in the 646U2.
533 *
534 * So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
535 */
536 if (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 5)
537 hwif->ultra_mask = 0x00;
538
539 if (hwif->cbl != ATA_CBL_PATA40_SHORT)
540 hwif->cbl = ata66_cmd64x(hwif);
541
542 switch (dev->device) {
543 case PCI_DEVICE_ID_CMD_648:
544 case PCI_DEVICE_ID_CMD_649:
545 alt_irq_bits:
546 hwif->ide_dma_end = &cmd648_ide_dma_end;
547 hwif->ide_dma_test_irq = &cmd648_ide_dma_test_irq;
548 break;
549 case PCI_DEVICE_ID_CMD_646:
550 hwif->chipset = ide_cmd646;
551 if (rev == 0x01) {
552 hwif->ide_dma_end = &cmd646_1_ide_dma_end;
553 break;
554 } else if (rev >= 0x03)
555 goto alt_irq_bits;
556 /* fall thru */
557 default:
558 hwif->ide_dma_end = &cmd64x_ide_dma_end;
559 hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq;
560 break;
561 }
562 }
563
564 static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d)
565 {
566 return ide_setup_pci_device(dev, d);
567 }
568
569 static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d)
570 {
571 /*
572 * The original PCI0646 didn't have the primary channel enable bit,
573 * it appeared starting with PCI0646U (i.e. revision ID 3).
574 */
575 if (dev->revision < 3)
576 d->enablebits[0].reg = 0;
577
578 return ide_setup_pci_device(dev, d);
579 }
580
581 static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
582 { /* 0 */
583 .name = "CMD643",
584 .init_setup = init_setup_cmd64x,
585 .init_chipset = init_chipset_cmd64x,
586 .init_hwif = init_hwif_cmd64x,
587 .autodma = AUTODMA,
588 .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
589 .bootable = ON_BOARD,
590 .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
591 .pio_mask = ATA_PIO5,
592 .udma_mask = 0x00, /* no udma */
593 },{ /* 1 */
594 .name = "CMD646",
595 .init_setup = init_setup_cmd646,
596 .init_chipset = init_chipset_cmd64x,
597 .init_hwif = init_hwif_cmd64x,
598 .autodma = AUTODMA,
599 .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
600 .bootable = ON_BOARD,
601 .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
602 .pio_mask = ATA_PIO5,
603 .udma_mask = 0x07, /* udma0-2 */
604 },{ /* 2 */
605 .name = "CMD648",
606 .init_setup = init_setup_cmd64x,
607 .init_chipset = init_chipset_cmd64x,
608 .init_hwif = init_hwif_cmd64x,
609 .autodma = AUTODMA,
610 .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
611 .bootable = ON_BOARD,
612 .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
613 .pio_mask = ATA_PIO5,
614 .udma_mask = 0x1f, /* udma0-4 */
615 },{ /* 3 */
616 .name = "CMD649",
617 .init_setup = init_setup_cmd64x,
618 .init_chipset = init_chipset_cmd64x,
619 .init_hwif = init_hwif_cmd64x,
620 .autodma = AUTODMA,
621 .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
622 .bootable = ON_BOARD,
623 .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
624 .pio_mask = ATA_PIO5,
625 .udma_mask = 0x3f, /* udma0-5 */
626 }
627 };
628
629 /*
630 * We may have to modify enablebits for PCI0646, so we'd better pass
631 * a local copy of the ide_pci_device_t structure down the call chain...
632 */
633 static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
634 {
635 ide_pci_device_t d = cmd64x_chipsets[id->driver_data];
636
637 return d.init_setup(dev, &d);
638 }
639
640 static const struct pci_device_id cmd64x_pci_tbl[] = {
641 { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
642 { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
643 { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 },
644 { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 },
645 { 0, },
646 };
647 MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);
648
649 static struct pci_driver driver = {
650 .name = "CMD64x_IDE",
651 .id_table = cmd64x_pci_tbl,
652 .probe = cmd64x_init_one,
653 };
654
655 static int __init cmd64x_ide_init(void)
656 {
657 return ide_pci_register_driver(&driver);
658 }
659
660 module_init(cmd64x_ide_init);
661
662 MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick");
663 MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
664 MODULE_LICENSE("GPL");
Mirror for ia64_pv_ops.git