pcmcia: CompactFlash driver for PA Semi Electra boards
[pv_ops_mirror.git] / drivers / net / pcmcia / xirc2ps_cs.c
blobc3b69602e275d7f90650f57aa69989ab4130f0c0
1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
15 * PCMCIA driver.
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
42 * are met:
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
51 * written permission.
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
74 #include <linux/in.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
82 #include <linux/bitops.h>
84 #include <pcmcia/cs_types.h>
85 #include <pcmcia/cs.h>
86 #include <pcmcia/cistpl.h>
87 #include <pcmcia/cisreg.h>
88 #include <pcmcia/ciscode.h>
90 #include <asm/io.h>
91 #include <asm/system.h>
92 #include <asm/uaccess.h>
94 #ifndef MANFID_COMPAQ
95 #define MANFID_COMPAQ 0x0138
96 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
97 #endif
99 #include <pcmcia/ds.h>
101 /* Time in jiffies before concluding Tx hung */
102 #define TX_TIMEOUT ((400*HZ)/1000)
104 /****************
105 * Some constants used to access the hardware
108 /* Register offsets and value constans */
109 #define XIRCREG_CR 0 /* Command register (wr) */
110 enum xirc_cr {
111 TransmitPacket = 0x01,
112 SoftReset = 0x02,
113 EnableIntr = 0x04,
114 ForceIntr = 0x08,
115 ClearTxFIFO = 0x10,
116 ClearRxOvrun = 0x20,
117 RestartTx = 0x40
119 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
120 enum xirc_esr {
121 FullPktRcvd = 0x01, /* full packet in receive buffer */
122 PktRejected = 0x04, /* a packet has been rejected */
123 TxPktPend = 0x08, /* TX Packet Pending */
124 IncorPolarity = 0x10,
125 MediaSelect = 0x20 /* set if TP, clear if AUI */
127 #define XIRCREG_PR 1 /* Page Register select */
128 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
129 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
130 enum xirc_isr {
131 TxBufOvr = 0x01, /* TX Buffer Overflow */
132 PktTxed = 0x02, /* Packet Transmitted */
133 MACIntr = 0x04, /* MAC Interrupt occurred */
134 TxResGrant = 0x08, /* Tx Reservation Granted */
135 RxFullPkt = 0x20, /* Rx Full Packet */
136 RxPktRej = 0x40, /* Rx Packet Rejected */
137 ForcedIntr= 0x80 /* Forced Interrupt */
139 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
140 #define XIRCREG1_IMR1 13
141 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
142 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
143 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
144 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
145 enum xirc_rsr {
146 PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
147 BrdcstPkt = 0x02, /* set if it is a broadcast packet */
148 PktTooLong = 0x04, /* set if packet length > 1518 */
149 AlignErr = 0x10, /* incorrect CRC and last octet not complete */
150 CRCErr = 0x20, /* incorrect CRC and last octet is complete */
151 PktRxOk = 0x80 /* received ok */
153 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
154 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
155 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
156 enum xirc_ecr {
157 FullDuplex = 0x04, /* enable full duplex mode */
158 LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
159 DisablePolCor = 0x10,/* disable auto polarity correction */
160 DisableLinkPulse = 0x20, /* disable link pulse generation */
161 DisableAutoTx = 0x40, /* disable auto-transmit */
163 #define XIRCREG2_RBS 8 /* receive buffer start register */
164 #define XIRCREG2_LED 10 /* LED Configuration register */
165 /* values for the leds: Bits 2-0 for led 1
166 * 0 disabled Bits 5-3 for led 2
167 * 1 collision
168 * 2 noncollision
169 * 3 link_detected
170 * 4 incor_polarity
171 * 5 jabber
172 * 6 auto_assertion
173 * 7 rx_tx_activity
175 #define XIRCREG2_MSR 12 /* Mohawk specific register */
177 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
178 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
179 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
180 #define XIRCREG4_BOV 10 /* Bonding Version Register */
181 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
182 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
183 /* MAC register can only by accessed with 8 bit operations */
184 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
185 enum xirc_cmd { /* Commands */
186 Transmit = 0x01,
187 EnableRecv = 0x04,
188 DisableRecv = 0x08,
189 Abort = 0x10,
190 Online = 0x20,
191 IntrAck = 0x40,
192 Offline = 0x80
194 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
195 #define XIRCREG40_RXST0 9 /* Receive Status Register */
196 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
197 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
198 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
199 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
200 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
201 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
202 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
203 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
204 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
205 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
206 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
207 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
208 #define XIRCREG45_REV 15 /* Revision Register (rd) */
209 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
211 static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
213 /****************
214 * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
215 * you do not define PCMCIA_DEBUG at all, all the debug code will be
216 * left out. If you compile with PCMCIA_DEBUG=0, the debug code will
217 * be present but disabled -- but it can then be enabled for specific
218 * modules at load time with a 'pc_debug=#' option to insmod.
220 #ifdef PCMCIA_DEBUG
221 static int pc_debug = PCMCIA_DEBUG;
222 module_param(pc_debug, int, 0);
223 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args)
224 #else
225 #define DEBUG(n, args...)
226 #endif
228 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
229 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
230 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
231 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
232 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
234 /* card types */
235 #define XIR_UNKNOWN 0 /* unknown: not supported */
236 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
237 #define XIR_CE2 2 /* (prodid 2) */
238 #define XIR_CE3 3 /* (prodid 3) */
239 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
240 #define XIR_CEM2 5 /* (prodid 2) */
241 #define XIR_CEM3 6 /* (prodid 3) */
242 #define XIR_CEM33 7 /* (prodid 4) */
243 #define XIR_CEM56M 8 /* (prodid 5) */
244 #define XIR_CEM56 9 /* (prodid 6) */
245 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
246 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
247 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
248 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
249 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
250 /*====================================================================*/
252 /* Module parameters */
254 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
255 MODULE_LICENSE("Dual MPL/GPL");
257 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
259 INT_MODULE_PARM(if_port, 0);
260 INT_MODULE_PARM(full_duplex, 0);
261 INT_MODULE_PARM(do_sound, 1);
262 INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
264 /*====================================================================*/
266 /* We do not process more than these number of bytes during one
267 * interrupt. (Of course we receive complete packets, so this is not
268 * an exact value).
269 * Something between 2000..22000; first value gives best interrupt latency,
270 * the second enables the usage of the complete on-chip buffer. We use the
271 * high value as the initial value.
273 static unsigned maxrx_bytes = 22000;
275 /* MII management prototypes */
276 static void mii_idle(kio_addr_t ioaddr);
277 static void mii_putbit(kio_addr_t ioaddr, unsigned data);
278 static int mii_getbit(kio_addr_t ioaddr);
279 static void mii_wbits(kio_addr_t ioaddr, unsigned data, int len);
280 static unsigned mii_rd(kio_addr_t ioaddr, u_char phyaddr, u_char phyreg);
281 static void mii_wr(kio_addr_t ioaddr, u_char phyaddr, u_char phyreg,
282 unsigned data, int len);
285 * The event() function is this driver's Card Services event handler.
286 * It will be called by Card Services when an appropriate card status
287 * event is received. The config() and release() entry points are
288 * used to configure or release a socket, in response to card insertion
289 * and ejection events. They are invoked from the event handler.
292 static int has_ce2_string(struct pcmcia_device * link);
293 static int xirc2ps_config(struct pcmcia_device * link);
294 static void xirc2ps_release(struct pcmcia_device * link);
296 /****************
297 * The attach() and detach() entry points are used to create and destroy
298 * "instances" of the driver, where each instance represents everything
299 * needed to manage one actual PCMCIA card.
302 static void xirc2ps_detach(struct pcmcia_device *p_dev);
304 /****************
305 * You'll also need to prototype all the functions that will actually
306 * be used to talk to your device. See 'pcmem_cs' for a good example
307 * of a fully self-sufficient driver; the other drivers rely more or
308 * less on other parts of the kernel.
311 static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
313 /****************
314 * A linked list of "instances" of the device. Each actual
315 * PCMCIA card corresponds to one device instance, and is described
316 * by one struct pcmcia_device structure (defined in ds.h).
318 * You may not want to use a linked list for this -- for example, the
319 * memory card driver uses an array of struct pcmcia_device pointers, where minor
320 * device numbers are used to derive the corresponding array index.
323 /****************
324 * A driver needs to provide a dev_node_t structure for each device
325 * on a card. In some cases, there is only one device per card (for
326 * example, ethernet cards, modems). In other cases, there may be
327 * many actual or logical devices (SCSI adapters, memory cards with
328 * multiple partitions). The dev_node_t structures need to be kept
329 * in a linked list starting at the 'dev' field of a struct pcmcia_device
330 * structure. We allocate them in the card's private data structure,
331 * because they generally can't be allocated dynamically.
334 typedef struct local_info_t {
335 struct net_device *dev;
336 struct pcmcia_device *p_dev;
337 dev_node_t node;
338 struct net_device_stats stats;
339 int card_type;
340 int probe_port;
341 int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
342 int mohawk; /* a CE3 type card */
343 int dingo; /* a CEM56 type card */
344 int new_mii; /* has full 10baseT/100baseT MII */
345 int modem; /* is a multi function card (i.e with a modem) */
346 void __iomem *dingo_ccr; /* only used for CEM56 cards */
347 unsigned last_ptr_value; /* last packets transmitted value */
348 const char *manf_str;
349 struct work_struct tx_timeout_task;
350 } local_info_t;
352 /****************
353 * Some more prototypes
355 static int do_start_xmit(struct sk_buff *skb, struct net_device *dev);
356 static void do_tx_timeout(struct net_device *dev);
357 static void xirc2ps_tx_timeout_task(struct work_struct *work);
358 static struct net_device_stats *do_get_stats(struct net_device *dev);
359 static void set_addresses(struct net_device *dev);
360 static void set_multicast_list(struct net_device *dev);
361 static int set_card_type(struct pcmcia_device *link, const void *s);
362 static int do_config(struct net_device *dev, struct ifmap *map);
363 static int do_open(struct net_device *dev);
364 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
365 static const struct ethtool_ops netdev_ethtool_ops;
366 static void hardreset(struct net_device *dev);
367 static void do_reset(struct net_device *dev, int full);
368 static int init_mii(struct net_device *dev);
369 static void do_powerdown(struct net_device *dev);
370 static int do_stop(struct net_device *dev);
372 /*=============== Helper functions =========================*/
373 static int
374 first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
376 int err;
378 if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 &&
379 (err = pcmcia_get_tuple_data(handle, tuple)) == 0)
380 err = pcmcia_parse_tuple(handle, tuple, parse);
381 return err;
384 static int
385 next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
387 int err;
389 if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 &&
390 (err = pcmcia_get_tuple_data(handle, tuple)) == 0)
391 err = pcmcia_parse_tuple(handle, tuple, parse);
392 return err;
395 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
396 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
397 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
398 #define PutByte(reg,value) outb((value), ioaddr+(reg))
399 #define PutWord(reg,value) outw((value), ioaddr+(reg))
401 /*====== Functions used for debugging =================================*/
402 #if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */
403 static void
404 PrintRegisters(struct net_device *dev)
406 kio_addr_t ioaddr = dev->base_addr;
408 if (pc_debug > 1) {
409 int i, page;
411 printk(KDBG_XIRC "Register common: ");
412 for (i = 0; i < 8; i++)
413 printk(" %2.2x", GetByte(i));
414 printk("\n");
415 for (page = 0; page <= 8; page++) {
416 printk(KDBG_XIRC "Register page %2x: ", page);
417 SelectPage(page);
418 for (i = 8; i < 16; i++)
419 printk(" %2.2x", GetByte(i));
420 printk("\n");
422 for (page=0x40 ; page <= 0x5f; page++) {
423 if (page == 0x43 || (page >= 0x46 && page <= 0x4f)
424 || (page >= 0x51 && page <=0x5e))
425 continue;
426 printk(KDBG_XIRC "Register page %2x: ", page);
427 SelectPage(page);
428 for (i = 8; i < 16; i++)
429 printk(" %2.2x", GetByte(i));
430 printk("\n");
434 #endif /* PCMCIA_DEBUG */
436 /*============== MII Management functions ===============*/
438 /****************
439 * Turn around for read
441 static void
442 mii_idle(kio_addr_t ioaddr)
444 PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
445 udelay(1);
446 PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
447 udelay(1);
450 /****************
451 * Write a bit to MDI/O
453 static void
454 mii_putbit(kio_addr_t ioaddr, unsigned data)
456 #if 1
457 if (data) {
458 PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
459 udelay(1);
460 PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
461 udelay(1);
462 } else {
463 PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
464 udelay(1);
465 PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
466 udelay(1);
468 #else
469 if (data) {
470 PutWord(XIRCREG2_GPR2-1, 0x0e0e);
471 udelay(1);
472 PutWord(XIRCREG2_GPR2-1, 0x0f0f);
473 udelay(1);
474 } else {
475 PutWord(XIRCREG2_GPR2-1, 0x0c0c);
476 udelay(1);
477 PutWord(XIRCREG2_GPR2-1, 0x0d0d);
478 udelay(1);
480 #endif
483 /****************
484 * Get a bit from MDI/O
486 static int
487 mii_getbit(kio_addr_t ioaddr)
489 unsigned d;
491 PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
492 udelay(1);
493 d = GetByte(XIRCREG2_GPR2); /* read MDIO */
494 PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
495 udelay(1);
496 return d & 0x20; /* read MDIO */
499 static void
500 mii_wbits(kio_addr_t ioaddr, unsigned data, int len)
502 unsigned m = 1 << (len-1);
503 for (; m; m >>= 1)
504 mii_putbit(ioaddr, data & m);
507 static unsigned
508 mii_rd(kio_addr_t ioaddr, u_char phyaddr, u_char phyreg)
510 int i;
511 unsigned data=0, m;
513 SelectPage(2);
514 for (i=0; i < 32; i++) /* 32 bit preamble */
515 mii_putbit(ioaddr, 1);
516 mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
517 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
518 mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
519 mii_idle(ioaddr); /* turn around */
520 mii_getbit(ioaddr);
522 for (m = 1<<15; m; m >>= 1)
523 if (mii_getbit(ioaddr))
524 data |= m;
525 mii_idle(ioaddr);
526 return data;
529 static void
530 mii_wr(kio_addr_t ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len)
532 int i;
534 SelectPage(2);
535 for (i=0; i < 32; i++) /* 32 bit preamble */
536 mii_putbit(ioaddr, 1);
537 mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
538 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
539 mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
540 mii_putbit(ioaddr, 1); /* turn around */
541 mii_putbit(ioaddr, 0);
542 mii_wbits(ioaddr, data, len); /* And write the data */
543 mii_idle(ioaddr);
546 /*============= Main bulk of functions =========================*/
548 /****************
549 * xirc2ps_attach() creates an "instance" of the driver, allocating
550 * local data structures for one device. The device is registered
551 * with Card Services.
553 * The dev_link structure is initialized, but we don't actually
554 * configure the card at this point -- we wait until we receive a
555 * card insertion event.
558 static int
559 xirc2ps_probe(struct pcmcia_device *link)
561 struct net_device *dev;
562 local_info_t *local;
564 DEBUG(0, "attach()\n");
566 /* Allocate the device structure */
567 dev = alloc_etherdev(sizeof(local_info_t));
568 if (!dev)
569 return -ENOMEM;
570 local = netdev_priv(dev);
571 local->dev = dev;
572 local->p_dev = link;
573 link->priv = dev;
575 /* General socket configuration */
576 link->conf.Attributes = CONF_ENABLE_IRQ;
577 link->conf.IntType = INT_MEMORY_AND_IO;
578 link->conf.ConfigIndex = 1;
579 link->irq.Handler = xirc2ps_interrupt;
580 link->irq.Instance = dev;
582 /* Fill in card specific entries */
583 dev->hard_start_xmit = &do_start_xmit;
584 dev->set_config = &do_config;
585 dev->get_stats = &do_get_stats;
586 dev->do_ioctl = &do_ioctl;
587 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
588 dev->set_multicast_list = &set_multicast_list;
589 dev->open = &do_open;
590 dev->stop = &do_stop;
591 #ifdef HAVE_TX_TIMEOUT
592 dev->tx_timeout = do_tx_timeout;
593 dev->watchdog_timeo = TX_TIMEOUT;
594 INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
595 #endif
597 return xirc2ps_config(link);
598 } /* xirc2ps_attach */
600 /****************
601 * This deletes a driver "instance". The device is de-registered
602 * with Card Services. If it has been released, all local data
603 * structures are freed. Otherwise, the structures will be freed
604 * when the device is released.
607 static void
608 xirc2ps_detach(struct pcmcia_device *link)
610 struct net_device *dev = link->priv;
612 DEBUG(0, "detach(0x%p)\n", link);
614 if (link->dev_node)
615 unregister_netdev(dev);
617 xirc2ps_release(link);
619 free_netdev(dev);
620 } /* xirc2ps_detach */
622 /****************
623 * Detect the type of the card. s is the buffer with the data of tuple 0x20
624 * Returns: 0 := not supported
625 * mediaid=11 and prodid=47
626 * Media-Id bits:
627 * Ethernet 0x01
628 * Tokenring 0x02
629 * Arcnet 0x04
630 * Wireless 0x08
631 * Modem 0x10
632 * GSM only 0x20
633 * Prod-Id bits:
634 * Pocket 0x10
635 * External 0x20
636 * Creditcard 0x40
637 * Cardbus 0x80
640 static int
641 set_card_type(struct pcmcia_device *link, const void *s)
643 struct net_device *dev = link->priv;
644 local_info_t *local = netdev_priv(dev);
645 #ifdef PCMCIA_DEBUG
646 unsigned cisrev = ((const unsigned char *)s)[2];
647 #endif
648 unsigned mediaid= ((const unsigned char *)s)[3];
649 unsigned prodid = ((const unsigned char *)s)[4];
651 DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n",
652 cisrev, mediaid, prodid);
654 local->mohawk = 0;
655 local->dingo = 0;
656 local->modem = 0;
657 local->card_type = XIR_UNKNOWN;
658 if (!(prodid & 0x40)) {
659 printk(KNOT_XIRC "Ooops: Not a creditcard\n");
660 return 0;
662 if (!(mediaid & 0x01)) {
663 printk(KNOT_XIRC "Not an Ethernet card\n");
664 return 0;
666 if (mediaid & 0x10) {
667 local->modem = 1;
668 switch(prodid & 15) {
669 case 1: local->card_type = XIR_CEM ; break;
670 case 2: local->card_type = XIR_CEM2 ; break;
671 case 3: local->card_type = XIR_CEM3 ; break;
672 case 4: local->card_type = XIR_CEM33 ; break;
673 case 5: local->card_type = XIR_CEM56M;
674 local->mohawk = 1;
675 break;
676 case 6:
677 case 7: /* 7 is the RealPort 10/56 */
678 local->card_type = XIR_CEM56 ;
679 local->mohawk = 1;
680 local->dingo = 1;
681 break;
683 } else {
684 switch(prodid & 15) {
685 case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
686 break;
687 case 2: local->card_type = XIR_CE2; break;
688 case 3: local->card_type = XIR_CE3;
689 local->mohawk = 1;
690 break;
693 if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
694 printk(KNOT_XIRC "Sorry, this is an old CE card\n");
695 return 0;
697 if (local->card_type == XIR_UNKNOWN)
698 printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
699 mediaid, prodid);
701 return 1;
704 /****************
705 * There are some CE2 cards out which claim to be a CE card.
706 * This function looks for a "CE2" in the 3rd version field.
707 * Returns: true if this is a CE2
709 static int
710 has_ce2_string(struct pcmcia_device * p_dev)
712 if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
713 return 1;
714 return 0;
717 /****************
718 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
719 * is received, to configure the PCMCIA socket, and to make the
720 * ethernet device available to the system.
722 static int
723 xirc2ps_config(struct pcmcia_device * link)
725 struct net_device *dev = link->priv;
726 local_info_t *local = netdev_priv(dev);
727 tuple_t tuple;
728 cisparse_t parse;
729 kio_addr_t ioaddr;
730 int err, i;
731 u_char buf[64];
732 cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
733 cistpl_cftable_entry_t *cf = &parse.cftable_entry;
734 DECLARE_MAC_BUF(mac);
736 local->dingo_ccr = NULL;
738 DEBUG(0, "config(0x%p)\n", link);
741 * This reads the card's CONFIG tuple to find its configuration
742 * registers.
744 tuple.Attributes = 0;
745 tuple.TupleData = buf;
746 tuple.TupleDataMax = 64;
747 tuple.TupleOffset = 0;
749 /* Is this a valid card */
750 tuple.DesiredTuple = CISTPL_MANFID;
751 if ((err=first_tuple(link, &tuple, &parse))) {
752 printk(KNOT_XIRC "manfid not found in CIS\n");
753 goto failure;
756 switch(parse.manfid.manf) {
757 case MANFID_XIRCOM:
758 local->manf_str = "Xircom";
759 break;
760 case MANFID_ACCTON:
761 local->manf_str = "Accton";
762 break;
763 case MANFID_COMPAQ:
764 case MANFID_COMPAQ2:
765 local->manf_str = "Compaq";
766 break;
767 case MANFID_INTEL:
768 local->manf_str = "Intel";
769 break;
770 case MANFID_TOSHIBA:
771 local->manf_str = "Toshiba";
772 break;
773 default:
774 printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
775 (unsigned)parse.manfid.manf);
776 goto failure;
778 DEBUG(0, "found %s card\n", local->manf_str);
780 if (!set_card_type(link, buf)) {
781 printk(KNOT_XIRC "this card is not supported\n");
782 goto failure;
785 /* get the ethernet address from the CIS */
786 tuple.DesiredTuple = CISTPL_FUNCE;
787 for (err = first_tuple(link, &tuple, &parse); !err;
788 err = next_tuple(link, &tuple, &parse)) {
789 /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries:
790 * the first one with a length of zero the second correct -
791 * so I skip all entries with length 0 */
792 if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID
793 && ((cistpl_lan_node_id_t *)parse.funce.data)->nb)
794 break;
796 if (err) { /* not found: try to get the node-id from tuple 0x89 */
797 tuple.DesiredTuple = 0x89; /* data layout looks like tuple 0x22 */
798 if ((err = pcmcia_get_first_tuple(link, &tuple)) == 0 &&
799 (err = pcmcia_get_tuple_data(link, &tuple)) == 0) {
800 if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID)
801 memcpy(&parse, buf, 8);
802 else
803 err = -1;
806 if (err) { /* another try (James Lehmer's CE2 version 4.1)*/
807 tuple.DesiredTuple = CISTPL_FUNCE;
808 for (err = first_tuple(link, &tuple, &parse); !err;
809 err = next_tuple(link, &tuple, &parse)) {
810 if (parse.funce.type == 0x02 && parse.funce.data[0] == 1
811 && parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) {
812 buf[1] = 4;
813 memcpy(&parse, buf+1, 8);
814 break;
818 if (err) {
819 printk(KNOT_XIRC "node-id not found in CIS\n");
820 goto failure;
822 node_id = (cistpl_lan_node_id_t *)parse.funce.data;
823 if (node_id->nb != 6) {
824 printk(KNOT_XIRC "malformed node-id in CIS\n");
825 goto failure;
827 for (i=0; i < 6; i++)
828 dev->dev_addr[i] = node_id->id[i];
830 link->io.IOAddrLines =10;
831 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
832 link->irq.Attributes = IRQ_HANDLE_PRESENT;
833 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
834 if (local->modem) {
835 int pass;
837 if (do_sound) {
838 link->conf.Attributes |= CONF_ENABLE_SPKR;
839 link->conf.Status |= CCSR_AUDIO_ENA;
841 link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED ;
842 link->io.NumPorts2 = 8;
843 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
844 if (local->dingo) {
845 /* Take the Modem IO port from the CIS and scan for a free
846 * Ethernet port */
847 link->io.NumPorts1 = 16; /* no Mako stuff anymore */
848 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
849 for (err = first_tuple(link, &tuple, &parse); !err;
850 err = next_tuple(link, &tuple, &parse)) {
851 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
852 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
853 link->conf.ConfigIndex = cf->index ;
854 link->io.BasePort2 = cf->io.win[0].base;
855 link->io.BasePort1 = ioaddr;
856 if (!(err=pcmcia_request_io(link, &link->io)))
857 goto port_found;
861 } else {
862 link->io.NumPorts1 = 18;
863 /* We do 2 passes here: The first one uses the regular mapping and
864 * the second tries again, thereby considering that the 32 ports are
865 * mirrored every 32 bytes. Actually we use a mirrored port for
866 * the Mako if (on the first pass) the COR bit 5 is set.
868 for (pass=0; pass < 2; pass++) {
869 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
870 for (err = first_tuple(link, &tuple, &parse); !err;
871 err = next_tuple(link, &tuple, &parse)){
872 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){
873 link->conf.ConfigIndex = cf->index ;
874 link->io.BasePort2 = cf->io.win[0].base;
875 link->io.BasePort1 = link->io.BasePort2
876 + (pass ? (cf->index & 0x20 ? -24:8)
877 : (cf->index & 0x20 ? 8:-24));
878 if (!(err=pcmcia_request_io(link, &link->io)))
879 goto port_found;
883 /* if special option:
884 * try to configure as Ethernet only.
885 * .... */
887 printk(KNOT_XIRC "no ports available\n");
888 } else {
889 link->irq.Attributes |= IRQ_TYPE_EXCLUSIVE;
890 link->io.NumPorts1 = 16;
891 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
892 link->io.BasePort1 = ioaddr;
893 if (!(err=pcmcia_request_io(link, &link->io)))
894 goto port_found;
896 link->io.BasePort1 = 0; /* let CS decide */
897 if ((err=pcmcia_request_io(link, &link->io))) {
898 cs_error(link, RequestIO, err);
899 goto config_error;
902 port_found:
903 if (err)
904 goto config_error;
906 /****************
907 * Now allocate an interrupt line. Note that this does not
908 * actually assign a handler to the interrupt.
910 if ((err=pcmcia_request_irq(link, &link->irq))) {
911 cs_error(link, RequestIRQ, err);
912 goto config_error;
915 /****************
916 * This actually configures the PCMCIA socket -- setting up
917 * the I/O windows and the interrupt mapping.
919 if ((err=pcmcia_request_configuration(link, &link->conf))) {
920 cs_error(link, RequestConfiguration, err);
921 goto config_error;
924 if (local->dingo) {
925 conf_reg_t reg;
926 win_req_t req;
927 memreq_t mem;
929 /* Reset the modem's BAR to the correct value
930 * This is necessary because in the RequestConfiguration call,
931 * the base address of the ethernet port (BasePort1) is written
932 * to the BAR registers of the modem.
934 reg.Action = CS_WRITE;
935 reg.Offset = CISREG_IOBASE_0;
936 reg.Value = link->io.BasePort2 & 0xff;
937 if ((err = pcmcia_access_configuration_register(link, &reg))) {
938 cs_error(link, AccessConfigurationRegister, err);
939 goto config_error;
941 reg.Action = CS_WRITE;
942 reg.Offset = CISREG_IOBASE_1;
943 reg.Value = (link->io.BasePort2 >> 8) & 0xff;
944 if ((err = pcmcia_access_configuration_register(link, &reg))) {
945 cs_error(link, AccessConfigurationRegister, err);
946 goto config_error;
949 /* There is no config entry for the Ethernet part which
950 * is at 0x0800. So we allocate a window into the attribute
951 * memory and write direct to the CIS registers
953 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
954 req.Base = req.Size = 0;
955 req.AccessSpeed = 0;
956 if ((err = pcmcia_request_window(&link, &req, &link->win))) {
957 cs_error(link, RequestWindow, err);
958 goto config_error;
960 local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
961 mem.CardOffset = 0x0;
962 mem.Page = 0;
963 if ((err = pcmcia_map_mem_page(link->win, &mem))) {
964 cs_error(link, MapMemPage, err);
965 goto config_error;
968 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
969 * part.
971 writeb(0x47, local->dingo_ccr + CISREG_COR);
972 ioaddr = link->io.BasePort1;
973 writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
974 writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
976 #if 0
978 u_char tmp;
979 printk(KERN_INFO "ECOR:");
980 for (i=0; i < 7; i++) {
981 tmp = readb(local->dingo_ccr + i*2);
982 printk(" %02x", tmp);
984 printk("\n");
985 printk(KERN_INFO "DCOR:");
986 for (i=0; i < 4; i++) {
987 tmp = readb(local->dingo_ccr + 0x20 + i*2);
988 printk(" %02x", tmp);
990 printk("\n");
991 printk(KERN_INFO "SCOR:");
992 for (i=0; i < 10; i++) {
993 tmp = readb(local->dingo_ccr + 0x40 + i*2);
994 printk(" %02x", tmp);
996 printk("\n");
998 #endif
1000 writeb(0x01, local->dingo_ccr + 0x20);
1001 writeb(0x0c, local->dingo_ccr + 0x22);
1002 writeb(0x00, local->dingo_ccr + 0x24);
1003 writeb(0x00, local->dingo_ccr + 0x26);
1004 writeb(0x00, local->dingo_ccr + 0x28);
1007 /* The if_port symbol can be set when the module is loaded */
1008 local->probe_port=0;
1009 if (!if_port) {
1010 local->probe_port = dev->if_port = 1;
1011 } else if ((if_port >= 1 && if_port <= 2) ||
1012 (local->mohawk && if_port==4))
1013 dev->if_port = if_port;
1014 else
1015 printk(KNOT_XIRC "invalid if_port requested\n");
1017 /* we can now register the device with the net subsystem */
1018 dev->irq = link->irq.AssignedIRQ;
1019 dev->base_addr = link->io.BasePort1;
1021 if (local->dingo)
1022 do_reset(dev, 1); /* a kludge to make the cem56 work */
1024 link->dev_node = &local->node;
1025 SET_NETDEV_DEV(dev, &handle_to_dev(link));
1027 if ((err=register_netdev(dev))) {
1028 printk(KNOT_XIRC "register_netdev() failed\n");
1029 link->dev_node = NULL;
1030 goto config_error;
1033 strcpy(local->node.dev_name, dev->name);
1035 /* give some infos about the hardware */
1036 printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %s\n",
1037 dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
1038 print_mac(mac, dev->dev_addr));
1040 return 0;
1042 config_error:
1043 xirc2ps_release(link);
1044 return -ENODEV;
1046 failure:
1047 return -ENODEV;
1048 } /* xirc2ps_config */
1050 /****************
1051 * After a card is removed, xirc2ps_release() will unregister the net
1052 * device, and release the PCMCIA configuration. If the device is
1053 * still open, this will be postponed until it is closed.
1055 static void
1056 xirc2ps_release(struct pcmcia_device *link)
1058 DEBUG(0, "release(0x%p)\n", link);
1060 if (link->win) {
1061 struct net_device *dev = link->priv;
1062 local_info_t *local = netdev_priv(dev);
1063 if (local->dingo)
1064 iounmap(local->dingo_ccr - 0x0800);
1066 pcmcia_disable_device(link);
1067 } /* xirc2ps_release */
1069 /*====================================================================*/
1072 static int xirc2ps_suspend(struct pcmcia_device *link)
1074 struct net_device *dev = link->priv;
1076 if (link->open) {
1077 netif_device_detach(dev);
1078 do_powerdown(dev);
1081 return 0;
1084 static int xirc2ps_resume(struct pcmcia_device *link)
1086 struct net_device *dev = link->priv;
1088 if (link->open) {
1089 do_reset(dev,1);
1090 netif_device_attach(dev);
1093 return 0;
1097 /*====================================================================*/
1099 /****************
1100 * This is the Interrupt service route.
1102 static irqreturn_t
1103 xirc2ps_interrupt(int irq, void *dev_id)
1105 struct net_device *dev = (struct net_device *)dev_id;
1106 local_info_t *lp = netdev_priv(dev);
1107 kio_addr_t ioaddr;
1108 u_char saved_page;
1109 unsigned bytes_rcvd;
1110 unsigned int_status, eth_status, rx_status, tx_status;
1111 unsigned rsr, pktlen;
1112 ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
1113 * is this something to worry about?
1114 * -- on a laptop?
1117 if (!netif_device_present(dev))
1118 return IRQ_HANDLED;
1120 ioaddr = dev->base_addr;
1121 if (lp->mohawk) { /* must disable the interrupt */
1122 PutByte(XIRCREG_CR, 0);
1125 DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
1127 saved_page = GetByte(XIRCREG_PR);
1128 /* Read the ISR to see whats the cause for the interrupt.
1129 * This also clears the interrupt flags on CE2 cards
1131 int_status = GetByte(XIRCREG_ISR);
1132 bytes_rcvd = 0;
1133 loop_entry:
1134 if (int_status == 0xff) { /* card may be ejected */
1135 DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq);
1136 goto leave;
1138 eth_status = GetByte(XIRCREG_ESR);
1140 SelectPage(0x40);
1141 rx_status = GetByte(XIRCREG40_RXST0);
1142 PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
1143 tx_status = GetByte(XIRCREG40_TXST0);
1144 tx_status |= GetByte(XIRCREG40_TXST1) << 8;
1145 PutByte(XIRCREG40_TXST0, 0);
1146 PutByte(XIRCREG40_TXST1, 0);
1148 DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1149 dev->name, int_status, eth_status, rx_status, tx_status);
1151 /***** receive section ******/
1152 SelectPage(0);
1153 while (eth_status & FullPktRcvd) {
1154 rsr = GetByte(XIRCREG0_RSR);
1155 if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
1156 /* too many bytes received during this int, drop the rest of the
1157 * packets */
1158 lp->stats.rx_dropped++;
1159 DEBUG(2, "%s: RX drop, too much done\n", dev->name);
1160 } else if (rsr & PktRxOk) {
1161 struct sk_buff *skb;
1163 pktlen = GetWord(XIRCREG0_RBC);
1164 bytes_rcvd += pktlen;
1166 DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen);
1168 skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
1169 if (!skb) {
1170 printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
1171 pktlen);
1172 lp->stats.rx_dropped++;
1173 } else { /* okay get the packet */
1174 skb_reserve(skb, 2);
1175 if (lp->silicon == 0 ) { /* work around a hardware bug */
1176 unsigned rhsa; /* receive start address */
1178 SelectPage(5);
1179 rhsa = GetWord(XIRCREG5_RHSA0);
1180 SelectPage(0);
1181 rhsa += 3; /* skip control infos */
1182 if (rhsa >= 0x8000)
1183 rhsa = 0;
1184 if (rhsa + pktlen > 0x8000) {
1185 unsigned i;
1186 u_char *buf = skb_put(skb, pktlen);
1187 for (i=0; i < pktlen ; i++, rhsa++) {
1188 buf[i] = GetByte(XIRCREG_EDP);
1189 if (rhsa == 0x8000) {
1190 rhsa = 0;
1191 i--;
1194 } else {
1195 insw(ioaddr+XIRCREG_EDP,
1196 skb_put(skb, pktlen), (pktlen+1)>>1);
1199 #if 0
1200 else if (lp->mohawk) {
1201 /* To use this 32 bit access we should use
1202 * a manual optimized loop
1203 * Also the words are swapped, we can get more
1204 * performance by using 32 bit access and swapping
1205 * the words in a register. Will need this for cardbus
1207 * Note: don't forget to change the ALLOC_SKB to .. +3
1209 unsigned i;
1210 u_long *p = skb_put(skb, pktlen);
1211 register u_long a;
1212 kio_addr_t edpreg = ioaddr+XIRCREG_EDP-2;
1213 for (i=0; i < len ; i += 4, p++) {
1214 a = inl(edpreg);
1215 __asm__("rorl $16,%0\n\t"
1216 :"=q" (a)
1217 : "0" (a));
1218 *p = a;
1221 #endif
1222 else {
1223 insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
1224 (pktlen+1)>>1);
1226 skb->protocol = eth_type_trans(skb, dev);
1227 netif_rx(skb);
1228 dev->last_rx = jiffies;
1229 lp->stats.rx_packets++;
1230 lp->stats.rx_bytes += pktlen;
1231 if (!(rsr & PhyPkt))
1232 lp->stats.multicast++;
1234 } else { /* bad packet */
1235 DEBUG(5, "rsr=%#02x\n", rsr);
1237 if (rsr & PktTooLong) {
1238 lp->stats.rx_frame_errors++;
1239 DEBUG(3, "%s: Packet too long\n", dev->name);
1241 if (rsr & CRCErr) {
1242 lp->stats.rx_crc_errors++;
1243 DEBUG(3, "%s: CRC error\n", dev->name);
1245 if (rsr & AlignErr) {
1246 lp->stats.rx_fifo_errors++; /* okay ? */
1247 DEBUG(3, "%s: Alignment error\n", dev->name);
1250 /* clear the received/dropped/error packet */
1251 PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
1253 /* get the new ethernet status */
1254 eth_status = GetByte(XIRCREG_ESR);
1256 if (rx_status & 0x10) { /* Receive overrun */
1257 lp->stats.rx_over_errors++;
1258 PutByte(XIRCREG_CR, ClearRxOvrun);
1259 DEBUG(3, "receive overrun cleared\n");
1262 /***** transmit section ******/
1263 if (int_status & PktTxed) {
1264 unsigned n, nn;
1266 n = lp->last_ptr_value;
1267 nn = GetByte(XIRCREG0_PTR);
1268 lp->last_ptr_value = nn;
1269 if (nn < n) /* rollover */
1270 lp->stats.tx_packets += 256 - n;
1271 else if (n == nn) { /* happens sometimes - don't know why */
1272 DEBUG(0, "PTR not changed?\n");
1273 } else
1274 lp->stats.tx_packets += lp->last_ptr_value - n;
1275 netif_wake_queue(dev);
1277 if (tx_status & 0x0002) { /* Execessive collissions */
1278 DEBUG(0, "tx restarted due to execssive collissions\n");
1279 PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
1281 if (tx_status & 0x0040)
1282 lp->stats.tx_aborted_errors++;
1284 /* recalculate our work chunk so that we limit the duration of this
1285 * ISR to about 1/10 of a second.
1286 * Calculate only if we received a reasonable amount of bytes.
1288 if (bytes_rcvd > 1000) {
1289 u_long duration = jiffies - start_ticks;
1291 if (duration >= HZ/10) { /* if more than about 1/10 second */
1292 maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
1293 if (maxrx_bytes < 2000)
1294 maxrx_bytes = 2000;
1295 else if (maxrx_bytes > 22000)
1296 maxrx_bytes = 22000;
1297 DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n",
1298 maxrx_bytes, bytes_rcvd, duration);
1299 } else if (!duration && maxrx_bytes < 22000) {
1300 /* now much faster */
1301 maxrx_bytes += 2000;
1302 if (maxrx_bytes > 22000)
1303 maxrx_bytes = 22000;
1304 DEBUG(1, "set maxrx=%u\n", maxrx_bytes);
1308 leave:
1309 if (lockup_hack) {
1310 if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
1311 goto loop_entry;
1313 SelectPage(saved_page);
1314 PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
1315 /* Instead of dropping packets during a receive, we could
1316 * force an interrupt with this command:
1317 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1319 return IRQ_HANDLED;
1320 } /* xirc2ps_interrupt */
1322 /*====================================================================*/
1324 static void
1325 xirc2ps_tx_timeout_task(struct work_struct *work)
1327 local_info_t *local =
1328 container_of(work, local_info_t, tx_timeout_task);
1329 struct net_device *dev = local->dev;
1330 /* reset the card */
1331 do_reset(dev,1);
1332 dev->trans_start = jiffies;
1333 netif_wake_queue(dev);
1336 static void
1337 do_tx_timeout(struct net_device *dev)
1339 local_info_t *lp = netdev_priv(dev);
1340 lp->stats.tx_errors++;
1341 printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
1342 schedule_work(&lp->tx_timeout_task);
1345 static int
1346 do_start_xmit(struct sk_buff *skb, struct net_device *dev)
1348 local_info_t *lp = netdev_priv(dev);
1349 kio_addr_t ioaddr = dev->base_addr;
1350 int okay;
1351 unsigned freespace;
1352 unsigned pktlen = skb->len;
1354 DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n",
1355 skb, dev, pktlen);
1358 /* adjust the packet length to min. required
1359 * and hope that the buffer is large enough
1360 * to provide some random data.
1361 * fixme: For Mohawk we can change this by sending
1362 * a larger packetlen than we actually have; the chip will
1363 * pad this in his buffer with random bytes
1365 if (pktlen < ETH_ZLEN)
1367 if (skb_padto(skb, ETH_ZLEN))
1368 return 0;
1369 pktlen = ETH_ZLEN;
1372 netif_stop_queue(dev);
1373 SelectPage(0);
1374 PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
1375 freespace = GetWord(XIRCREG0_TSO);
1376 okay = freespace & 0x8000;
1377 freespace &= 0x7fff;
1378 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1379 okay = pktlen +2 < freespace;
1380 DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
1381 dev->name, freespace, okay ? " (okay)":" (not enough)");
1382 if (!okay) { /* not enough space */
1383 return 1; /* upper layer may decide to requeue this packet */
1385 /* send the packet */
1386 PutWord(XIRCREG_EDP, (u_short)pktlen);
1387 outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
1388 if (pktlen & 1)
1389 PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
1391 if (lp->mohawk)
1392 PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
1394 dev_kfree_skb (skb);
1395 dev->trans_start = jiffies;
1396 lp->stats.tx_bytes += pktlen;
1397 netif_start_queue(dev);
1398 return 0;
1401 static struct net_device_stats *
1402 do_get_stats(struct net_device *dev)
1404 local_info_t *lp = netdev_priv(dev);
1406 /* lp->stats.rx_missed_errors = GetByte(?) */
1407 return &lp->stats;
1410 /****************
1411 * Set all addresses: This first one is the individual address,
1412 * the next 9 addresses are taken from the multicast list and
1413 * the rest is filled with the individual address.
1415 static void
1416 set_addresses(struct net_device *dev)
1418 kio_addr_t ioaddr = dev->base_addr;
1419 local_info_t *lp = netdev_priv(dev);
1420 struct dev_mc_list *dmi = dev->mc_list;
1421 unsigned char *addr;
1422 int i,j,k,n;
1424 SelectPage(k=0x50);
1425 for (i=0,j=8,n=0; ; i++, j++) {
1426 if (i > 5) {
1427 if (++n > 9)
1428 break;
1429 i = 0;
1430 if (n > 1 && n <= dev->mc_count && dmi) {
1431 dmi = dmi->next;
1434 if (j > 15) {
1435 j = 8;
1436 k++;
1437 SelectPage(k);
1440 if (n && n <= dev->mc_count && dmi)
1441 addr = dmi->dmi_addr;
1442 else
1443 addr = dev->dev_addr;
1445 if (lp->mohawk)
1446 PutByte(j, addr[5-i]);
1447 else
1448 PutByte(j, addr[i]);
1450 SelectPage(0);
1453 /****************
1454 * Set or clear the multicast filter for this adaptor.
1455 * We can filter up to 9 addresses, if more are requested we set
1456 * multicast promiscuous mode.
1459 static void
1460 set_multicast_list(struct net_device *dev)
1462 kio_addr_t ioaddr = dev->base_addr;
1464 SelectPage(0x42);
1465 if (dev->flags & IFF_PROMISC) { /* snoop */
1466 PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
1467 } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
1468 PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */
1469 } else if (dev->mc_count) {
1470 /* the chip can filter 9 addresses perfectly */
1471 PutByte(XIRCREG42_SWC1, 0x01);
1472 SelectPage(0x40);
1473 PutByte(XIRCREG40_CMD0, Offline);
1474 set_addresses(dev);
1475 SelectPage(0x40);
1476 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1477 } else { /* standard usage */
1478 PutByte(XIRCREG42_SWC1, 0x00);
1480 SelectPage(0);
1483 static int
1484 do_config(struct net_device *dev, struct ifmap *map)
1486 local_info_t *local = netdev_priv(dev);
1488 DEBUG(0, "do_config(%p)\n", dev);
1489 if (map->port != 255 && map->port != dev->if_port) {
1490 if (map->port > 4)
1491 return -EINVAL;
1492 if (!map->port) {
1493 local->probe_port = 1;
1494 dev->if_port = 1;
1495 } else {
1496 local->probe_port = 0;
1497 dev->if_port = map->port;
1499 printk(KERN_INFO "%s: switching to %s port\n",
1500 dev->name, if_names[dev->if_port]);
1501 do_reset(dev,1); /* not the fine way :-) */
1503 return 0;
1506 /****************
1507 * Open the driver
1509 static int
1510 do_open(struct net_device *dev)
1512 local_info_t *lp = netdev_priv(dev);
1513 struct pcmcia_device *link = lp->p_dev;
1515 DEBUG(0, "do_open(%p)\n", dev);
1517 /* Check that the PCMCIA card is still here. */
1518 /* Physical device present signature. */
1519 if (!pcmcia_dev_present(link))
1520 return -ENODEV;
1522 /* okay */
1523 link->open++;
1525 netif_start_queue(dev);
1526 do_reset(dev,1);
1528 return 0;
1531 static void netdev_get_drvinfo(struct net_device *dev,
1532 struct ethtool_drvinfo *info)
1534 strcpy(info->driver, "xirc2ps_cs");
1535 sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
1538 static const struct ethtool_ops netdev_ethtool_ops = {
1539 .get_drvinfo = netdev_get_drvinfo,
1542 static int
1543 do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1545 local_info_t *local = netdev_priv(dev);
1546 kio_addr_t ioaddr = dev->base_addr;
1547 u16 *data = (u16 *)&rq->ifr_ifru;
1549 DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1550 dev->name, rq->ifr_ifrn.ifrn_name, cmd,
1551 data[0], data[1], data[2], data[3]);
1553 if (!local->mohawk)
1554 return -EOPNOTSUPP;
1556 switch(cmd) {
1557 case SIOCGMIIPHY: /* Get the address of the PHY in use. */
1558 data[0] = 0; /* we have only this address */
1559 /* fall through */
1560 case SIOCGMIIREG: /* Read the specified MII register. */
1561 data[3] = mii_rd(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
1562 break;
1563 case SIOCSMIIREG: /* Write the specified MII register */
1564 if (!capable(CAP_NET_ADMIN))
1565 return -EPERM;
1566 mii_wr(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2], 16);
1567 break;
1568 default:
1569 return -EOPNOTSUPP;
1571 return 0;
1574 static void
1575 hardreset(struct net_device *dev)
1577 local_info_t *local = netdev_priv(dev);
1578 kio_addr_t ioaddr = dev->base_addr;
1580 SelectPage(4);
1581 udelay(1);
1582 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1583 msleep(40); /* wait 40 msec */
1584 if (local->mohawk)
1585 PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
1586 else
1587 PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1588 msleep(20); /* wait 20 msec */
1591 static void
1592 do_reset(struct net_device *dev, int full)
1594 local_info_t *local = netdev_priv(dev);
1595 kio_addr_t ioaddr = dev->base_addr;
1596 unsigned value;
1598 DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
1600 hardreset(dev);
1601 PutByte(XIRCREG_CR, SoftReset); /* set */
1602 msleep(20); /* wait 20 msec */
1603 PutByte(XIRCREG_CR, 0); /* clear */
1604 msleep(40); /* wait 40 msec */
1605 if (local->mohawk) {
1606 SelectPage(4);
1607 /* set pin GP1 and GP2 to output (0x0c)
1608 * set GP1 to low to power up the ML6692 (0x00)
1609 * set GP2 to high to power up the 10Mhz chip (0x02)
1611 PutByte(XIRCREG4_GPR0, 0x0e);
1614 /* give the circuits some time to power up */
1615 msleep(500); /* about 500ms */
1617 local->last_ptr_value = 0;
1618 local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
1619 : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
1621 if (local->probe_port) {
1622 if (!local->mohawk) {
1623 SelectPage(4);
1624 PutByte(XIRCREG4_GPR0, 4);
1625 local->probe_port = 0;
1627 } else if (dev->if_port == 2) { /* enable 10Base2 */
1628 SelectPage(0x42);
1629 PutByte(XIRCREG42_SWC1, 0xC0);
1630 } else { /* enable 10BaseT */
1631 SelectPage(0x42);
1632 PutByte(XIRCREG42_SWC1, 0x80);
1634 msleep(40); /* wait 40 msec to let it complete */
1636 #ifdef PCMCIA_DEBUG
1637 if (pc_debug) {
1638 SelectPage(0);
1639 value = GetByte(XIRCREG_ESR); /* read the ESR */
1640 printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
1642 #endif
1644 /* setup the ECR */
1645 SelectPage(1);
1646 PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
1647 PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
1648 value = GetByte(XIRCREG1_ECR);
1649 #if 0
1650 if (local->mohawk)
1651 value |= DisableLinkPulse;
1652 PutByte(XIRCREG1_ECR, value);
1653 #endif
1654 DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value);
1656 SelectPage(0x42);
1657 PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
1659 if (local->silicon != 1) {
1660 /* set the local memory dividing line.
1661 * The comments in the sample code say that this is only
1662 * settable with the scipper version 2 which is revision 0.
1663 * Always for CE3 cards
1665 SelectPage(2);
1666 PutWord(XIRCREG2_RBS, 0x2000);
1669 if (full)
1670 set_addresses(dev);
1672 /* Hardware workaround:
1673 * The receive byte pointer after reset is off by 1 so we need
1674 * to move the offset pointer back to 0.
1676 SelectPage(0);
1677 PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
1679 /* setup MAC IMRs and clear status registers */
1680 SelectPage(0x40); /* Bit 7 ... bit 0 */
1681 PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1682 PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1683 PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1684 PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1685 PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1686 PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1688 if (full && local->mohawk && init_mii(dev)) {
1689 if (dev->if_port == 4 || local->dingo || local->new_mii) {
1690 printk(KERN_INFO "%s: MII selected\n", dev->name);
1691 SelectPage(2);
1692 PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
1693 msleep(20);
1694 } else {
1695 printk(KERN_INFO "%s: MII detected; using 10mbs\n",
1696 dev->name);
1697 SelectPage(0x42);
1698 if (dev->if_port == 2) /* enable 10Base2 */
1699 PutByte(XIRCREG42_SWC1, 0xC0);
1700 else /* enable 10BaseT */
1701 PutByte(XIRCREG42_SWC1, 0x80);
1702 msleep(40); /* wait 40 msec to let it complete */
1704 if (full_duplex)
1705 PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
1706 } else { /* No MII */
1707 SelectPage(0);
1708 value = GetByte(XIRCREG_ESR); /* read the ESR */
1709 dev->if_port = (value & MediaSelect) ? 1 : 2;
1712 /* configure the LEDs */
1713 SelectPage(2);
1714 if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
1715 PutByte(XIRCREG2_LED, 0x3b);
1716 else /* Coax: Not-Collision and Activity */
1717 PutByte(XIRCREG2_LED, 0x3a);
1719 if (local->dingo)
1720 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1722 /* enable receiver and put the mac online */
1723 if (full) {
1724 SelectPage(0x40);
1725 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1728 /* setup Ethernet IMR and enable interrupts */
1729 SelectPage(1);
1730 PutByte(XIRCREG1_IMR0, 0xff);
1731 udelay(1);
1732 SelectPage(0);
1733 PutByte(XIRCREG_CR, EnableIntr);
1734 if (local->modem && !local->dingo) { /* do some magic */
1735 if (!(GetByte(0x10) & 0x01))
1736 PutByte(0x10, 0x11); /* unmask master-int bit */
1739 if (full)
1740 printk(KERN_INFO "%s: media %s, silicon revision %d\n",
1741 dev->name, if_names[dev->if_port], local->silicon);
1742 /* We should switch back to page 0 to avoid a bug in revision 0
1743 * where regs with offset below 8 can't be read after an access
1744 * to the MAC registers */
1745 SelectPage(0);
1748 /****************
1749 * Initialize the Media-Independent-Interface
1750 * Returns: True if we have a good MII
1752 static int
1753 init_mii(struct net_device *dev)
1755 local_info_t *local = netdev_priv(dev);
1756 kio_addr_t ioaddr = dev->base_addr;
1757 unsigned control, status, linkpartner;
1758 int i;
1760 if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
1761 dev->if_port = if_port;
1762 local->probe_port = 0;
1763 return 1;
1766 status = mii_rd(ioaddr, 0, 1);
1767 if ((status & 0xff00) != 0x7800)
1768 return 0; /* No MII */
1770 local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
1772 if (local->probe_port)
1773 control = 0x1000; /* auto neg */
1774 else if (dev->if_port == 4)
1775 control = 0x2000; /* no auto neg, 100mbs mode */
1776 else
1777 control = 0x0000; /* no auto neg, 10mbs mode */
1778 mii_wr(ioaddr, 0, 0, control, 16);
1779 udelay(100);
1780 control = mii_rd(ioaddr, 0, 0);
1782 if (control & 0x0400) {
1783 printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
1784 dev->name);
1785 local->probe_port = 0;
1786 return 0;
1789 if (local->probe_port) {
1790 /* according to the DP83840A specs the auto negotiation process
1791 * may take up to 3.5 sec, so we use this also for our ML6692
1792 * Fixme: Better to use a timer here!
1794 for (i=0; i < 35; i++) {
1795 msleep(100); /* wait 100 msec */
1796 status = mii_rd(ioaddr, 0, 1);
1797 if ((status & 0x0020) && (status & 0x0004))
1798 break;
1801 if (!(status & 0x0020)) {
1802 printk(KERN_INFO "%s: autonegotiation failed;"
1803 " using 10mbs\n", dev->name);
1804 if (!local->new_mii) {
1805 control = 0x0000;
1806 mii_wr(ioaddr, 0, 0, control, 16);
1807 udelay(100);
1808 SelectPage(0);
1809 dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
1811 } else {
1812 linkpartner = mii_rd(ioaddr, 0, 5);
1813 printk(KERN_INFO "%s: MII link partner: %04x\n",
1814 dev->name, linkpartner);
1815 if (linkpartner & 0x0080) {
1816 dev->if_port = 4;
1817 } else
1818 dev->if_port = 1;
1822 return 1;
1825 static void
1826 do_powerdown(struct net_device *dev)
1829 kio_addr_t ioaddr = dev->base_addr;
1831 DEBUG(0, "do_powerdown(%p)\n", dev);
1833 SelectPage(4);
1834 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1835 SelectPage(0);
1838 static int
1839 do_stop(struct net_device *dev)
1841 kio_addr_t ioaddr = dev->base_addr;
1842 local_info_t *lp = netdev_priv(dev);
1843 struct pcmcia_device *link = lp->p_dev;
1845 DEBUG(0, "do_stop(%p)\n", dev);
1847 if (!link)
1848 return -ENODEV;
1850 netif_stop_queue(dev);
1852 SelectPage(0);
1853 PutByte(XIRCREG_CR, 0); /* disable interrupts */
1854 SelectPage(0x01);
1855 PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
1856 SelectPage(4);
1857 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1858 SelectPage(0);
1860 link->open--;
1861 return 0;
1864 static struct pcmcia_device_id xirc2ps_ids[] = {
1865 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1866 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1867 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1868 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1869 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1870 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1871 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1872 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1873 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1874 PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1875 PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1876 PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1877 PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1878 PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1879 PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1880 PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1881 PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1882 PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1883 PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1884 /* also matches CFE-10 cards! */
1885 /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1886 PCMCIA_DEVICE_NULL,
1888 MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
1891 static struct pcmcia_driver xirc2ps_cs_driver = {
1892 .owner = THIS_MODULE,
1893 .drv = {
1894 .name = "xirc2ps_cs",
1896 .probe = xirc2ps_probe,
1897 .remove = xirc2ps_detach,
1898 .id_table = xirc2ps_ids,
1899 .suspend = xirc2ps_suspend,
1900 .resume = xirc2ps_resume,
1903 static int __init
1904 init_xirc2ps_cs(void)
1906 return pcmcia_register_driver(&xirc2ps_cs_driver);
1909 static void __exit
1910 exit_xirc2ps_cs(void)
1912 pcmcia_unregister_driver(&xirc2ps_cs_driver);
1915 module_init(init_xirc2ps_cs);
1916 module_exit(exit_xirc2ps_cs);
1918 #ifndef MODULE
1919 static int __init setup_xirc2ps_cs(char *str)
1921 /* if_port, full_duplex, do_sound, lockup_hack
1923 int ints[10] = { -1 };
1925 str = get_options(str, 9, ints);
1927 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1928 MAYBE_SET(if_port, 3);
1929 MAYBE_SET(full_duplex, 4);
1930 MAYBE_SET(do_sound, 5);
1931 MAYBE_SET(lockup_hack, 6);
1932 #undef MAYBE_SET
1934 return 1;
1937 __setup("xirc2ps_cs=", setup_xirc2ps_cs);
1938 #endif