fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / drivers / scsi / hptiop.h
blob2a5e46e001cba5ebd2357354b26d5352887ea3da
1 /*
2 * HighPoint RR3xxx controller driver for Linux
3 * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * Please report bugs/comments/suggestions to linux@highpoint-tech.com
16 * For more information, visit http://www.highpoint-tech.com
18 #ifndef _HPTIOP_H_
19 #define _HPTIOP_H_
21 struct hpt_iopmu
23 __le32 resrved0[4];
24 __le32 inbound_msgaddr0;
25 __le32 inbound_msgaddr1;
26 __le32 outbound_msgaddr0;
27 __le32 outbound_msgaddr1;
28 __le32 inbound_doorbell;
29 __le32 inbound_intstatus;
30 __le32 inbound_intmask;
31 __le32 outbound_doorbell;
32 __le32 outbound_intstatus;
33 __le32 outbound_intmask;
34 __le32 reserved1[2];
35 __le32 inbound_queue;
36 __le32 outbound_queue;
39 #define IOPMU_QUEUE_EMPTY 0xffffffff
40 #define IOPMU_QUEUE_MASK_HOST_BITS 0xf0000000
41 #define IOPMU_QUEUE_ADDR_HOST_BIT 0x80000000
42 #define IOPMU_QUEUE_REQUEST_SIZE_BIT 0x40000000
43 #define IOPMU_QUEUE_REQUEST_RESULT_BIT 0x40000000
45 #define IOPMU_OUTBOUND_INT_MSG0 1
46 #define IOPMU_OUTBOUND_INT_MSG1 2
47 #define IOPMU_OUTBOUND_INT_DOORBELL 4
48 #define IOPMU_OUTBOUND_INT_POSTQUEUE 8
49 #define IOPMU_OUTBOUND_INT_PCI 0x10
51 #define IOPMU_INBOUND_INT_MSG0 1
52 #define IOPMU_INBOUND_INT_MSG1 2
53 #define IOPMU_INBOUND_INT_DOORBELL 4
54 #define IOPMU_INBOUND_INT_ERROR 8
55 #define IOPMU_INBOUND_INT_POSTQUEUE 0x10
57 enum hpt_iopmu_message {
58 /* host-to-iop messages */
59 IOPMU_INBOUND_MSG0_NOP = 0,
60 IOPMU_INBOUND_MSG0_RESET,
61 IOPMU_INBOUND_MSG0_FLUSH,
62 IOPMU_INBOUND_MSG0_SHUTDOWN,
63 IOPMU_INBOUND_MSG0_STOP_BACKGROUND_TASK,
64 IOPMU_INBOUND_MSG0_START_BACKGROUND_TASK,
65 IOPMU_INBOUND_MSG0_MAX = 0xff,
66 /* iop-to-host messages */
67 IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_0 = 0x100,
68 IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_MAX = 0x1ff,
69 IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_0 = 0x200,
70 IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_MAX = 0x2ff,
71 IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_0 = 0x300,
72 IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_MAX = 0x3ff,
75 struct hpt_iop_request_header
77 __le32 size;
78 __le32 type;
79 __le32 flags;
80 __le32 result;
81 __le32 context; /* host context */
82 __le32 context_hi32;
85 #define IOP_REQUEST_FLAG_SYNC_REQUEST 1
86 #define IOP_REQUEST_FLAG_BIST_REQUEST 2
87 #define IOP_REQUEST_FLAG_REMAPPED 4
88 #define IOP_REQUEST_FLAG_OUTPUT_CONTEXT 8
90 enum hpt_iop_request_type {
91 IOP_REQUEST_TYPE_GET_CONFIG = 0,
92 IOP_REQUEST_TYPE_SET_CONFIG,
93 IOP_REQUEST_TYPE_BLOCK_COMMAND,
94 IOP_REQUEST_TYPE_SCSI_COMMAND,
95 IOP_REQUEST_TYPE_IOCTL_COMMAND,
96 IOP_REQUEST_TYPE_MAX
99 enum hpt_iop_result_type {
100 IOP_RESULT_PENDING = 0,
101 IOP_RESULT_SUCCESS,
102 IOP_RESULT_FAIL,
103 IOP_RESULT_BUSY,
104 IOP_RESULT_RESET,
105 IOP_RESULT_INVALID_REQUEST,
106 IOP_RESULT_BAD_TARGET,
107 IOP_RESULT_MODE_SENSE_CHECK_CONDITION,
110 struct hpt_iop_request_get_config
112 struct hpt_iop_request_header header;
113 __le32 interface_version;
114 __le32 firmware_version;
115 __le32 max_requests;
116 __le32 request_size;
117 __le32 max_sg_count;
118 __le32 data_transfer_length;
119 __le32 alignment_mask;
120 __le32 max_devices;
121 __le32 sdram_size;
124 struct hpt_iop_request_set_config
126 struct hpt_iop_request_header header;
127 __le32 iop_id;
128 __le16 vbus_id;
129 __le16 max_host_request_size;
130 __le32 reserve[6];
133 struct hpt_iopsg
135 __le32 size;
136 __le32 eot; /* non-zero: end of table */
137 __le64 pci_address;
140 struct hpt_iop_request_block_command
142 struct hpt_iop_request_header header;
143 u8 channel;
144 u8 target;
145 u8 lun;
146 u8 pad1;
147 __le16 command; /* IOP_BLOCK_COMMAND_{READ,WRITE} */
148 __le16 sectors;
149 __le64 lba;
150 struct hpt_iopsg sg_list[1];
153 #define IOP_BLOCK_COMMAND_READ 1
154 #define IOP_BLOCK_COMMAND_WRITE 2
155 #define IOP_BLOCK_COMMAND_VERIFY 3
156 #define IOP_BLOCK_COMMAND_FLUSH 4
157 #define IOP_BLOCK_COMMAND_SHUTDOWN 5
159 struct hpt_iop_request_scsi_command
161 struct hpt_iop_request_header header;
162 u8 channel;
163 u8 target;
164 u8 lun;
165 u8 pad1;
166 u8 cdb[16];
167 __le32 dataxfer_length;
168 struct hpt_iopsg sg_list[1];
171 struct hpt_iop_request_ioctl_command
173 struct hpt_iop_request_header header;
174 __le32 ioctl_code;
175 __le32 inbuf_size;
176 __le32 outbuf_size;
177 __le32 bytes_returned;
178 u8 buf[1];
179 /* out data should be put at buf[(inbuf_size+3)&~3] */
182 #define HPTIOP_MAX_REQUESTS 256u
184 struct hptiop_request {
185 struct hptiop_request * next;
186 void * req_virt;
187 u32 req_shifted_phy;
188 struct scsi_cmnd * scp;
189 int index;
192 struct hpt_scsi_pointer {
193 int mapped;
194 int sgcnt;
195 dma_addr_t dma_handle;
198 #define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp)
200 struct hptiop_hba {
201 struct hpt_iopmu __iomem * iop;
202 struct Scsi_Host * host;
203 struct pci_dev * pcidev;
205 /* IOP config info */
206 u32 interface_version;
207 u32 firmware_version;
208 u32 sdram_size;
209 u32 max_devices;
210 u32 max_requests;
211 u32 max_request_size;
212 u32 max_sg_descriptors;
214 u32 req_size; /* host-allocated request buffer size */
216 int iopintf_v2: 1;
217 int initialized: 1;
218 int msg_done: 1;
220 struct hptiop_request * req_list;
221 struct hptiop_request reqs[HPTIOP_MAX_REQUESTS];
223 /* used to free allocated dma area */
224 void * dma_coherent;
225 dma_addr_t dma_coherent_handle;
227 atomic_t reset_count;
228 atomic_t resetting;
230 wait_queue_head_t reset_wq;
231 wait_queue_head_t ioctl_wq;
234 struct hpt_ioctl_k
236 struct hptiop_hba * hba;
237 u32 ioctl_code;
238 u32 inbuf_size;
239 u32 outbuf_size;
240 void * inbuf;
241 void * outbuf;
242 u32 * bytes_returned;
243 void (*done)(struct hpt_ioctl_k *);
244 int result; /* HPT_IOCTL_RESULT_ */
247 #define HPT_IOCTL_RESULT_OK 0
248 #define HPT_IOCTL_RESULT_FAILED (-1)
250 #if 0
251 #define dprintk(fmt, args...) do { printk(fmt, ##args); } while(0)
252 #else
253 #define dprintk(fmt, args...)
254 #endif
256 #endif