drivers/isdn/sc/command.c

   1 /* $Id: command.c,v 1.4.10.1 2001/09/23 22:24:59 kai Exp $
   2  *
   3  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
   4  *
   5  * This software may be used and distributed according to the terms
   6  * of the GNU General Public License, incorporated herein by reference.
   7  *
   8  * For more information, please contact gpl-info@spellcast.com or write:
   9  *
  10  *     SpellCaster Telecommunications Inc.
  11  *     5621 Finch Avenue East, Unit #3
  12  *     Scarborough, Ontario  Canada
  13  *     M1B 2T9
  14  *     +1 (416) 297-8565
  15  *     +1 (416) 297-6433 Facsimile
  16  */
  17
  18 #include <linux/module.h>
  19 #include "includes.h"           /* This must be first */
  20 #include "hardware.h"
  21 #include "message.h"
  22 #include "card.h"
  23 #include "scioc.h"
  24
  25 static int dial(int card, unsigned long channel, setup_parm setup);
  26 static int hangup(int card, unsigned long channel);
  27 static int answer(int card, unsigned long channel);
  28 static int clreaz(int card, unsigned long channel);
  29 static int seteaz(int card, unsigned long channel, char *);
  30 static int setl2(int card, unsigned long arg);
  31 static int setl3(int card, unsigned long arg);
  32 static int acceptb(int card, unsigned long channel);
  33
  34 #ifdef DEBUG
  35 /*
  36  * Translate command codes to strings
  37  */
  38 static char *commands[] = { "ISDN_CMD_IOCTL",
  39                             "ISDN_CMD_DIAL",
  40                             "ISDN_CMD_ACCEPTB",
  41                             "ISDN_CMD_ACCEPTB",
  42                             "ISDN_CMD_HANGUP",
  43                             "ISDN_CMD_CLREAZ",
  44                             "ISDN_CMD_SETEAZ",
  45                             NULL,
  46                             NULL,
  47                             NULL,
  48                             "ISDN_CMD_SETL2",
  49                             NULL,
  50                             "ISDN_CMD_SETL3",
  51                             NULL,
  52                             NULL,
  53                             NULL,
  54                             NULL,
  55                             NULL, };
  56
  57 /*
  58  * Translates ISDN4Linux protocol codes to strings for debug messages
  59  */
  60 static char *l3protos[] = { "ISDN_PROTO_L3_TRANS" };
  61 static char *l2protos[] = { "ISDN_PROTO_L2_X75I",
  62                             "ISDN_PROTO_L2_X75UI",
  63                             "ISDN_PROTO_L2_X75BUI",
  64                             "ISDN_PROTO_L2_HDLC",
  65                             "ISDN_PROTO_L2_TRANS" };
  66 #endif
  67
  68 int get_card_from_id(int driver)
  69 {
  70         int i;
  71
  72         for(i = 0 ; i < cinst ; i++) {
  73                 if(sc_adapter[i]->driverId == driver)
  74                         return i;
  75         }
  76         return -ENODEV;
  77 }
  78
  79 /*
  80  * command
  81  */
  82
  83 int command(isdn_ctrl *cmd)
  84 {
  85         int card;
  86
  87         card = get_card_from_id(cmd->driver);
  88         if(!IS_VALID_CARD(card)) {
  89                 pr_debug("Invalid param: %d is not a valid card id\n", card);
  90                 return -ENODEV;
  91         }
  92
  93         /*
  94          * Dispatch the command
  95          */
  96         switch(cmd->command) {
  97         case ISDN_CMD_IOCTL:
  98         {
  99                 unsigned long   cmdptr;
 100                 scs_ioctl       ioc;
 101
 102                 memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long));
 103                 if (copy_from_user(&ioc, (scs_ioctl __user *)cmdptr,
 104                                    sizeof(scs_ioctl))) {
 105                         pr_debug("%s: Failed to verify user space 0x%lx\n",
 106                                 sc_adapter[card]->devicename, cmdptr);
 107                         return -EFAULT;
 108                 }
 109                 return sc_ioctl(card, &ioc);
 110         }
 111         case ISDN_CMD_DIAL:
 112                 return dial(card, cmd->arg, cmd->parm.setup);
 113         case ISDN_CMD_HANGUP:
 114                 return hangup(card, cmd->arg);
 115         case ISDN_CMD_ACCEPTD:
 116                 return answer(card, cmd->arg);
 117         case ISDN_CMD_ACCEPTB:
 118                 return acceptb(card, cmd->arg);
 119         case ISDN_CMD_CLREAZ:
 120                 return clreaz(card, cmd->arg);
 121         case ISDN_CMD_SETEAZ:
 122                 return seteaz(card, cmd->arg, cmd->parm.num);
 123         case ISDN_CMD_SETL2:
 124                 return setl2(card, cmd->arg);
 125         case ISDN_CMD_SETL3:
 126                 return setl3(card, cmd->arg);
 127         default:
 128                 return -EINVAL;
 129         }
 130         return 0;
 131 }
 132
 133 /*
 134  * start the onboard firmware
 135  */
 136 int startproc(int card)
 137 {
 138         int status;
 139
 140         if(!IS_VALID_CARD(card)) {
 141                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 142                 return -ENODEV;
 143         }
 144
 145         /*
 146          * send start msg
 147          */
 148         status = sendmessage(card, CMPID,cmReqType2,
 149                           cmReqClass0,
 150                           cmReqStartProc,
 151                           0,0,NULL);
 152         pr_debug("%s: Sent startProc\n", sc_adapter[card]->devicename);
 153
 154         return status;
 155 }
 156
 157
 158 /*
 159  * Dials the number passed in
 160  */
 161 static int dial(int card, unsigned long channel, setup_parm setup)
 162 {
 163         int status;
 164         char Phone[48];
 165
 166         if(!IS_VALID_CARD(card)) {
 167                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 168                 return -ENODEV;
 169         }
 170
 171         /*extract ISDN number to dial from eaz/msn string*/
 172         strcpy(Phone,setup.phone);
 173
 174         /*send the connection message*/
 175         status = sendmessage(card, CEPID,ceReqTypePhy,
 176                                 ceReqClass1,
 177                                 ceReqPhyConnect,
 178                                 (unsigned char) channel+1,
 179                                 strlen(Phone),
 180                                 (unsigned int *) Phone);
 181
 182         pr_debug("%s: Dialing %s on channel %lu\n",
 183                 sc_adapter[card]->devicename, Phone, channel+1);
 184
 185         return status;
 186 }
 187
 188 /*
 189  * Answer an incoming call
 190  */
 191 static int answer(int card, unsigned long channel)
 192 {
 193         if(!IS_VALID_CARD(card)) {
 194                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 195                 return -ENODEV;
 196         }
 197
 198         if(setup_buffers(card, channel+1)) {
 199                 hangup(card, channel+1);
 200                 return -ENOBUFS;
 201         }
 202
 203         indicate_status(card, ISDN_STAT_BCONN,channel,NULL);
 204         pr_debug("%s: Answered incoming call on channel %lu\n",
 205                 sc_adapter[card]->devicename, channel+1);
 206         return 0;
 207 }
 208
 209 /*
 210  * Hangup up the call on specified channel
 211  */
 212 static int hangup(int card, unsigned long channel)
 213 {
 214         int status;
 215
 216         if(!IS_VALID_CARD(card)) {
 217                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 218                 return -ENODEV;
 219         }
 220
 221         status = sendmessage(card, CEPID, ceReqTypePhy,
 222                                                  ceReqClass1,
 223                                                  ceReqPhyDisconnect,
 224                                                  (unsigned char) channel+1,
 225                                                  0,
 226                                                  NULL);
 227         pr_debug("%s: Sent HANGUP message to channel %lu\n",
 228                 sc_adapter[card]->devicename, channel+1);
 229         return status;
 230 }
 231
 232 /*
 233  * Set the layer 2 protocol (X.25, HDLC, Raw)
 234  */
 235 static int setl2(int card, unsigned long arg)
 236 {
 237         int status =0;
 238         int protocol,channel;
 239
 240         if(!IS_VALID_CARD(card)) {
 241                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 242                 return -ENODEV;
 243         }
 244         protocol = arg >> 8;
 245         channel = arg & 0xff;
 246         sc_adapter[card]->channel[channel].l2_proto = protocol;
 247
 248         /*
 249          * check that the adapter is also set to the correct protocol
 250          */
 251         pr_debug("%s: Sending GetFrameFormat for channel %d\n",
 252                 sc_adapter[card]->devicename, channel+1);
 253         status = sendmessage(card, CEPID, ceReqTypeCall,
 254                                 ceReqClass0,
 255                                 ceReqCallGetFrameFormat,
 256                                 (unsigned char)channel+1,
 257                                 1,
 258                                 (unsigned int *) protocol);
 259         if(status)
 260                 return status;
 261         return 0;
 262 }
 263
 264 /*
 265  * Set the layer 3 protocol
 266  */
 267 static int setl3(int card, unsigned long channel)
 268 {
 269         int protocol = channel >> 8;
 270
 271         if(!IS_VALID_CARD(card)) {
 272                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 273                 return -ENODEV;
 274         }
 275
 276         sc_adapter[card]->channel[channel].l3_proto = protocol;
 277         return 0;
 278 }
 279
 280 static int acceptb(int card, unsigned long channel)
 281 {
 282         if(!IS_VALID_CARD(card)) {
 283                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 284                 return -ENODEV;
 285         }
 286
 287         if(setup_buffers(card, channel+1))
 288         {
 289                 hangup(card, channel+1);
 290                 return -ENOBUFS;
 291         }
 292
 293         pr_debug("%s: B-Channel connection accepted on channel %lu\n",
 294                 sc_adapter[card]->devicename, channel+1);
 295         indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
 296         return 0;
 297 }
 298
 299 static int clreaz(int card, unsigned long arg)
 300 {
 301         if(!IS_VALID_CARD(card)) {
 302                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 303                 return -ENODEV;
 304         }
 305
 306         strcpy(sc_adapter[card]->channel[arg].eazlist, "");
 307         sc_adapter[card]->channel[arg].eazclear = 1;
 308         pr_debug("%s: EAZ List cleared for channel %lu\n",
 309                 sc_adapter[card]->devicename, arg+1);
 310         return 0;
 311 }
 312
 313 static int seteaz(int card, unsigned long arg, char *num)
 314 {
 315         if(!IS_VALID_CARD(card)) {
 316                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 317                 return -ENODEV;
 318         }
 319
 320         strcpy(sc_adapter[card]->channel[arg].eazlist, num);
 321         sc_adapter[card]->channel[arg].eazclear = 0;
 322         pr_debug("%s: EAZ list for channel %lu set to: %s\n",
 323                 sc_adapter[card]->devicename, arg+1,
 324                 sc_adapter[card]->channel[arg].eazlist);
 325         return 0;
 326 }
 327
 328 int reset(int card)
 329 {
 330         unsigned long flags;
 331
 332         if(!IS_VALID_CARD(card)) {
 333                 pr_debug("Invalid param: %d is not a valid card id\n", card);
 334                 return -ENODEV;
 335         }
 336
 337         indicate_status(card, ISDN_STAT_STOP, 0, NULL);
 338
 339         if(sc_adapter[card]->EngineUp) {
 340                 del_timer(&sc_adapter[card]->stat_timer);
 341         }
 342
 343         sc_adapter[card]->EngineUp = 0;
 344
 345         spin_lock_irqsave(&sc_adapter[card]->lock, flags);
 346         init_timer(&sc_adapter[card]->reset_timer);
 347         sc_adapter[card]->reset_timer.function = sc_check_reset;
 348         sc_adapter[card]->reset_timer.data = card;
 349         sc_adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME;
 350         add_timer(&sc_adapter[card]->reset_timer);
 351         spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
 352
 353         outb(0x1,sc_adapter[card]->ioport[SFT_RESET]);
 354
 355         pr_debug("%s: Adapter Reset\n", sc_adapter[card]->devicename);
 356         return 0;
 357 }
 358
 359 void flushreadfifo (int card)
 360 {
 361         while(inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA)
 362                 inb(sc_adapter[card]->ioport[FIFO_READ]);
 363 }