?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ia64/kvm: compilation fix. export account_system_vtime.
[pv_ops_mirror.git] / drivers / usb / serial / whiteheat.c
blobf07e8a4c1f3ddb3b3cfe12f4a3b22bef7e7c11a9
1 /*
2 * USB ConnectTech WhiteHEAT driver
3 *
4 * Copyright (C) 2002
5 * Connect Tech Inc.
6 *
7 * Copyright (C) 1999 - 2001
8 * Greg Kroah-Hartman (greg@kroah.com)
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * See Documentation/usb/usb-serial.txt for more information on using this driver
16 *
17 * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
18 * Upgrade to full working driver
19 *
20 * (05/30/2001) gkh
21 * switched from using spinlock to a semaphore, which fixes lots of problems.
22 *
23 * (04/08/2001) gb
24 * Identify version on module load.
25 *
26 * 2001_Mar_19 gkh
27 * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
28 * than once, and the got the proper usb_device_id table entries so
29 * the driver works again.
30 *
31 * (11/01/2000) Adam J. Richter
32 * usb_device_id table support
33 *
34 * (10/05/2000) gkh
35 * Fixed bug with urb->dev not being set properly, now that the usb
36 * core needs it.
37 *
38 * (10/03/2000) smd
39 * firmware is improved to guard against crap sent to device
40 * firmware now replies CMD_FAILURE on bad things
41 * read_callback fix you provided for private info struct
42 * command_finished now indicates success or fail
43 * setup_port struct now packed to avoid gcc padding
44 * firmware uses 1 based port numbering, driver now handles that
45 *
46 * (09/11/2000) gkh
47 * Removed DEBUG #ifdefs with call to usb_serial_debug_data
48 *
49 * (07/19/2000) gkh
50 * Added module_init and module_exit functions to handle the fact that this
51 * driver is a loadable module now.
52 * Fixed bug with port->minor that was found by Al Borchers
53 *
54 * (07/04/2000) gkh
55 * Added support for port settings. Baud rate can now be changed. Line signals
56 * are not transferred to and from the tty layer yet, but things seem to be
57 * working well now.
58 *
59 * (05/04/2000) gkh
60 * First cut at open and close commands. Data can flow through the ports at
61 * default speeds now.
62 *
63 * (03/26/2000) gkh
64 * Split driver up into device specific pieces.
65 *
66 */
67
68 #include <linux/kernel.h>
69 #include <linux/errno.h>
70 #include <linux/init.h>
71 #include <linux/slab.h>
72 #include <linux/tty.h>
73 #include <linux/tty_driver.h>
74 #include <linux/tty_flip.h>
75 #include <linux/module.h>
76 #include <linux/spinlock.h>
77 #include <linux/mutex.h>
78 #include <asm/uaccess.h>
79 #include <asm/termbits.h>
80 #include <linux/usb.h>
81 #include <linux/serial_reg.h>
82 #include <linux/serial.h>
83 #include <linux/usb/serial.h>
84 #include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */
85 #include "whiteheat.h" /* WhiteHEAT specific commands */
86
87 static int debug;
88
89 #ifndef CMSPAR
90 #define CMSPAR 0
91 #endif
92
93 /*
94 * Version Information
95 */
96 #define DRIVER_VERSION "v2.0"
97 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
98 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
99
100 #define CONNECT_TECH_VENDOR_ID 0x0710
101 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
102 #define CONNECT_TECH_WHITE_HEAT_ID 0x8001
103
104 /*
105 ID tables for whiteheat are unusual, because we want to different
106 things for different versions of the device. Eventually, this
107 will be doable from a single table. But, for now, we define two
108 separate ID tables, and then a third table that combines them
109 just for the purpose of exporting the autoloading information.
110 */
111 static struct usb_device_id id_table_std [] = {
112 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
113 { } /* Terminating entry */
114 };
115
116 static struct usb_device_id id_table_prerenumeration [] = {
117 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
118 { } /* Terminating entry */
119 };
120
121 static struct usb_device_id id_table_combined [] = {
122 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
123 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
124 { } /* Terminating entry */
125 };
126
127 MODULE_DEVICE_TABLE (usb, id_table_combined);
128
129 static struct usb_driver whiteheat_driver = {
130 .name = "whiteheat",
131 .probe = usb_serial_probe,
132 .disconnect = usb_serial_disconnect,
133 .id_table = id_table_combined,
134 .no_dynamic_id = 1,
135 };
136
137 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
138 static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id);
139 static int whiteheat_firmware_attach (struct usb_serial *serial);
140
141 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
142 static int whiteheat_attach (struct usb_serial *serial);
143 static void whiteheat_shutdown (struct usb_serial *serial);
144 static int whiteheat_open (struct usb_serial_port *port, struct file *filp);
145 static void whiteheat_close (struct usb_serial_port *port, struct file *filp);
146 static int whiteheat_write (struct usb_serial_port *port, const unsigned char *buf, int count);
147 static int whiteheat_write_room (struct usb_serial_port *port);
148 static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
149 static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios * old);
150 static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file);
151 static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
152 static void whiteheat_break_ctl (struct usb_serial_port *port, int break_state);
153 static int whiteheat_chars_in_buffer (struct usb_serial_port *port);
154 static void whiteheat_throttle (struct usb_serial_port *port);
155 static void whiteheat_unthrottle (struct usb_serial_port *port);
156 static void whiteheat_read_callback (struct urb *urb);
157 static void whiteheat_write_callback (struct urb *urb);
158
159 static struct usb_serial_driver whiteheat_fake_device = {
160 .driver = {
161 .owner = THIS_MODULE,
162 .name = "whiteheatnofirm",
163 },
164 .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
165 .usb_driver = &whiteheat_driver,
166 .id_table = id_table_prerenumeration,
167 .num_ports = 1,
168 .probe = whiteheat_firmware_download,
169 .attach = whiteheat_firmware_attach,
170 };
171
172 static struct usb_serial_driver whiteheat_device = {
173 .driver = {
174 .owner = THIS_MODULE,
175 .name = "whiteheat",
176 },
177 .description = "Connect Tech - WhiteHEAT",
178 .usb_driver = &whiteheat_driver,
179 .id_table = id_table_std,
180 .num_ports = 4,
181 .attach = whiteheat_attach,
182 .shutdown = whiteheat_shutdown,
183 .open = whiteheat_open,
184 .close = whiteheat_close,
185 .write = whiteheat_write,
186 .write_room = whiteheat_write_room,
187 .ioctl = whiteheat_ioctl,
188 .set_termios = whiteheat_set_termios,
189 .break_ctl = whiteheat_break_ctl,
190 .tiocmget = whiteheat_tiocmget,
191 .tiocmset = whiteheat_tiocmset,
192 .chars_in_buffer = whiteheat_chars_in_buffer,
193 .throttle = whiteheat_throttle,
194 .unthrottle = whiteheat_unthrottle,
195 .read_bulk_callback = whiteheat_read_callback,
196 .write_bulk_callback = whiteheat_write_callback,
197 };
198
199
200 struct whiteheat_command_private {
201 struct mutex mutex;
202 __u8 port_running;
203 __u8 command_finished;
204 wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */
205 __u8 result_buffer[64];
206 };
207
208
209 #define THROTTLED 0x01
210 #define ACTUALLY_THROTTLED 0x02
211
212 static int urb_pool_size = 8;
213
214 struct whiteheat_urb_wrap {
215 struct list_head list;
216 struct urb *urb;
217 };
218
219 struct whiteheat_private {
220 spinlock_t lock;
221 __u8 flags;
222 __u8 mcr; /* FIXME: no locking on mcr */
223 struct list_head rx_urbs_free;
224 struct list_head rx_urbs_submitted;
225 struct list_head rx_urb_q;
226 struct work_struct rx_work;
227 struct usb_serial_port *port;
228 struct list_head tx_urbs_free;
229 struct list_head tx_urbs_submitted;
230 struct mutex deathwarrant;
231 };
232
233
234 /* local function prototypes */
235 static int start_command_port(struct usb_serial *serial);
236 static void stop_command_port(struct usb_serial *serial);
237 static void command_port_write_callback(struct urb *urb);
238 static void command_port_read_callback(struct urb *urb);
239
240 static int start_port_read(struct usb_serial_port *port);
241 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
242 static struct list_head *list_first(struct list_head *head);
243 static void rx_data_softint(struct work_struct *work);
244
245 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
246 static int firm_open(struct usb_serial_port *port);
247 static int firm_close(struct usb_serial_port *port);
248 static int firm_setup_port(struct usb_serial_port *port);
249 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
250 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
251 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
252 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
253 static int firm_get_dtr_rts(struct usb_serial_port *port);
254 static int firm_report_tx_done(struct usb_serial_port *port);
255
256
257 #define COMMAND_PORT 4
258 #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */
259 #define COMMAND_TIMEOUT_MS 2000
260 #define CLOSING_DELAY (30 * HZ)
261
262
263 /*****************************************************************************
264 * Connect Tech's White Heat prerenumeration driver functions
265 *****************************************************************************/
266
267 /* steps to download the firmware to the WhiteHEAT device:
268 - hold the reset (by writing to the reset bit of the CPUCS register)
269 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
270 - release the reset (by writing to the CPUCS register)
271 - download the WH.HEX file for all addresses greater than 0x1b3f using
272 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
273 - hold the reset
274 - download the WH.HEX file for all addresses less than 0x1b40 using
275 VENDOR_REQUEST_ANCHOR_LOAD
276 - release the reset
277 - device renumerated itself and comes up as new device id with all
278 firmware download completed.
279 */
280 static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
281 {
282 int response;
283 const struct whiteheat_hex_record *record;
284
285 dbg("%s", __func__);
286
287 response = ezusb_set_reset (serial, 1);
288
289 record = &whiteheat_loader[0];
290 while (record->address != 0xffff) {
291 response = ezusb_writememory (serial, record->address,
292 (unsigned char *)record->data, record->data_size, 0xa0);
293 if (response < 0) {
294 err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
295 __func__, response, record->address, record->data, record->data_size);
296 break;
297 }
298 ++record;
299 }
300
301 response = ezusb_set_reset (serial, 0);
302
303 record = &whiteheat_firmware[0];
304 while (record->address < 0x1b40) {
305 ++record;
306 }
307 while (record->address != 0xffff) {
308 response = ezusb_writememory (serial, record->address,
309 (unsigned char *)record->data, record->data_size, 0xa3);
310 if (response < 0) {
311 err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
312 __func__, response, record->address, record->data, record->data_size);
313 break;
314 }
315 ++record;
316 }
317
318 response = ezusb_set_reset (serial, 1);
319
320 record = &whiteheat_firmware[0];
321 while (record->address < 0x1b40) {
322 response = ezusb_writememory (serial, record->address,
323 (unsigned char *)record->data, record->data_size, 0xa0);
324 if (response < 0) {
325 err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
326 __func__, response, record->address, record->data, record->data_size);
327 break;
328 }
329 ++record;
330 }
331
332 response = ezusb_set_reset (serial, 0);
333
334 return 0;
335 }
336
337
338 static int whiteheat_firmware_attach (struct usb_serial *serial)
339 {
340 /* We want this device to fail to have a driver assigned to it */
341 return 1;
342 }
343
344
345 /*****************************************************************************
346 * Connect Tech's White Heat serial driver functions
347 *****************************************************************************/
348 static int whiteheat_attach (struct usb_serial *serial)
349 {
350 struct usb_serial_port *command_port;
351 struct whiteheat_command_private *command_info;
352 struct usb_serial_port *port;
353 struct whiteheat_private *info;
354 struct whiteheat_hw_info *hw_info;
355 int pipe;
356 int ret;
357 int alen;
358 __u8 *command;
359 __u8 *result;
360 int i;
361 int j;
362 struct urb *urb;
363 int buf_size;
364 struct whiteheat_urb_wrap *wrap;
365 struct list_head *tmp;
366
367 command_port = serial->port[COMMAND_PORT];
368
369 pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress);
370 command = kmalloc(2, GFP_KERNEL);
371 if (!command)
372 goto no_command_buffer;
373 command[0] = WHITEHEAT_GET_HW_INFO;
374 command[1] = 0;
375
376 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
377 if (!result)
378 goto no_result_buffer;
379 /*
380 * When the module is reloaded the firmware is still there and
381 * the endpoints are still in the usb core unchanged. This is the
382 * unlinking bug in disguise. Same for the call below.
383 */
384 usb_clear_halt(serial->dev, pipe);
385 ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
386 if (ret) {
387 err("%s: Couldn't send command [%d]", serial->type->description, ret);
388 goto no_firmware;
389 } else if (alen != 2) {
390 err("%s: Send command incomplete [%d]", serial->type->description, alen);
391 goto no_firmware;
392 }
393
394 pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress);
395 /* See the comment on the usb_clear_halt() above */
396 usb_clear_halt(serial->dev, pipe);
397 ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
398 if (ret) {
399 err("%s: Couldn't get results [%d]", serial->type->description, ret);
400 goto no_firmware;
401 } else if (alen != sizeof(*hw_info) + 1) {
402 err("%s: Get results incomplete [%d]", serial->type->description, alen);
403 goto no_firmware;
404 } else if (result[0] != command[0]) {
405 err("%s: Command failed [%d]", serial->type->description, result[0]);
406 goto no_firmware;
407 }
408
409 hw_info = (struct whiteheat_hw_info *)&result[1];
410
411 info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
412 DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
413
414 for (i = 0; i < serial->num_ports; i++) {
415 port = serial->port[i];
416
417 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
418 if (info == NULL) {
419 err("%s: Out of memory for port structures\n", serial->type->description);
420 goto no_private;
421 }
422
423 spin_lock_init(&info->lock);
424 mutex_init(&info->deathwarrant);
425 info->flags = 0;
426 info->mcr = 0;
427 INIT_WORK(&info->rx_work, rx_data_softint);
428 info->port = port;
429
430 INIT_LIST_HEAD(&info->rx_urbs_free);
431 INIT_LIST_HEAD(&info->rx_urbs_submitted);
432 INIT_LIST_HEAD(&info->rx_urb_q);
433 INIT_LIST_HEAD(&info->tx_urbs_free);
434 INIT_LIST_HEAD(&info->tx_urbs_submitted);
435
436 for (j = 0; j < urb_pool_size; j++) {
437 urb = usb_alloc_urb(0, GFP_KERNEL);
438 if (!urb) {
439 err("No free urbs available");
440 goto no_rx_urb;
441 }
442 buf_size = port->read_urb->transfer_buffer_length;
443 urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
444 if (!urb->transfer_buffer) {
445 err("Couldn't allocate urb buffer");
446 goto no_rx_buf;
447 }
448 wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
449 if (!wrap) {
450 err("Couldn't allocate urb wrapper");
451 goto no_rx_wrap;
452 }
453 usb_fill_bulk_urb(urb, serial->dev,
454 usb_rcvbulkpipe(serial->dev,
455 port->bulk_in_endpointAddress),
456 urb->transfer_buffer, buf_size,
457 whiteheat_read_callback, port);
458 wrap->urb = urb;
459 list_add(&wrap->list, &info->rx_urbs_free);
460
461 urb = usb_alloc_urb(0, GFP_KERNEL);
462 if (!urb) {
463 err("No free urbs available");
464 goto no_tx_urb;
465 }
466 buf_size = port->write_urb->transfer_buffer_length;
467 urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
468 if (!urb->transfer_buffer) {
469 err("Couldn't allocate urb buffer");
470 goto no_tx_buf;
471 }
472 wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
473 if (!wrap) {
474 err("Couldn't allocate urb wrapper");
475 goto no_tx_wrap;
476 }
477 usb_fill_bulk_urb(urb, serial->dev,
478 usb_sndbulkpipe(serial->dev,
479 port->bulk_out_endpointAddress),
480 urb->transfer_buffer, buf_size,
481 whiteheat_write_callback, port);
482 wrap->urb = urb;
483 list_add(&wrap->list, &info->tx_urbs_free);
484 }
485
486 usb_set_serial_port_data(port, info);
487 }
488
489 command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
490 if (command_info == NULL) {
491 err("%s: Out of memory for port structures\n", serial->type->description);
492 goto no_command_private;
493 }
494
495 mutex_init(&command_info->mutex);
496 command_info->port_running = 0;
497 init_waitqueue_head(&command_info->wait_command);
498 usb_set_serial_port_data(command_port, command_info);
499 command_port->write_urb->complete = command_port_write_callback;
500 command_port->read_urb->complete = command_port_read_callback;
501 kfree(result);
502 kfree(command);
503
504 return 0;
505
506 no_firmware:
507 /* Firmware likely not running */
508 err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
509 err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
510 err("%s: please contact support@connecttech.com\n", serial->type->description);
511 kfree(result);
512 return -ENODEV;
513
514 no_command_private:
515 for (i = serial->num_ports - 1; i >= 0; i--) {
516 port = serial->port[i];
517 info = usb_get_serial_port_data(port);
518 for (j = urb_pool_size - 1; j >= 0; j--) {
519 tmp = list_first(&info->tx_urbs_free);
520 list_del(tmp);
521 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
522 urb = wrap->urb;
523 kfree(wrap);
524 no_tx_wrap:
525 kfree(urb->transfer_buffer);
526 no_tx_buf:
527 usb_free_urb(urb);
528 no_tx_urb:
529 tmp = list_first(&info->rx_urbs_free);
530 list_del(tmp);
531 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
532 urb = wrap->urb;
533 kfree(wrap);
534 no_rx_wrap:
535 kfree(urb->transfer_buffer);
536 no_rx_buf:
537 usb_free_urb(urb);
538 no_rx_urb:
539 ;
540 }
541 kfree(info);
542 no_private:
543 ;
544 }
545 kfree(result);
546 no_result_buffer:
547 kfree(command);
548 no_command_buffer:
549 return -ENOMEM;
550 }
551
552
553 static void whiteheat_shutdown (struct usb_serial *serial)
554 {
555 struct usb_serial_port *command_port;
556 struct usb_serial_port *port;
557 struct whiteheat_private *info;
558 struct whiteheat_urb_wrap *wrap;
559 struct urb *urb;
560 struct list_head *tmp;
561 struct list_head *tmp2;
562 int i;
563
564 dbg("%s", __func__);
565
566 /* free up our private data for our command port */
567 command_port = serial->port[COMMAND_PORT];
568 kfree (usb_get_serial_port_data(command_port));
569
570 for (i = 0; i < serial->num_ports; i++) {
571 port = serial->port[i];
572 info = usb_get_serial_port_data(port);
573 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
574 list_del(tmp);
575 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
576 urb = wrap->urb;
577 kfree(wrap);
578 kfree(urb->transfer_buffer);
579 usb_free_urb(urb);
580 }
581 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
582 list_del(tmp);
583 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
584 urb = wrap->urb;
585 kfree(wrap);
586 kfree(urb->transfer_buffer);
587 usb_free_urb(urb);
588 }
589 kfree(info);
590 }
591
592 return;
593 }
594
595
596 static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
597 {
598 int retval = 0;
599 struct ktermios old_term;
600
601 dbg("%s - port %d", __func__, port->number);
602
603 retval = start_command_port(port->serial);
604 if (retval)
605 goto exit;
606
607 port->tty->low_latency = 1;
608
609 /* send an open port command */
610 retval = firm_open(port);
611 if (retval) {
612 stop_command_port(port->serial);
613 goto exit;
614 }
615
616 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
617 if (retval) {
618 firm_close(port);
619 stop_command_port(port->serial);
620 goto exit;
621 }
622
623 old_term.c_cflag = ~port->tty->termios->c_cflag;
624 old_term.c_iflag = ~port->tty->termios->c_iflag;
625 whiteheat_set_termios(port, &old_term);
626
627 /* Work around HCD bugs */
628 usb_clear_halt(port->serial->dev, port->read_urb->pipe);
629 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
630
631 /* Start reading from the device */
632 retval = start_port_read(port);
633 if (retval) {
634 err("%s - failed submitting read urb, error %d", __func__, retval);
635 firm_close(port);
636 stop_command_port(port->serial);
637 goto exit;
638 }
639
640 exit:
641 dbg("%s - exit, retval = %d", __func__, retval);
642 return retval;
643 }
644
645
646 static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
647 {
648 struct whiteheat_private *info = usb_get_serial_port_data(port);
649 struct whiteheat_urb_wrap *wrap;
650 struct urb *urb;
651 struct list_head *tmp;
652 struct list_head *tmp2;
653
654 dbg("%s - port %d", __func__, port->number);
655
656 mutex_lock(&port->serial->disc_mutex);
657 /* filp is NULL when called from usb_serial_disconnect */
658 if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
659 mutex_unlock(&port->serial->disc_mutex);
660 return;
661 }
662 mutex_unlock(&port->serial->disc_mutex);
663
664 port->tty->closing = 1;
665
666 /*
667 * Not currently in use; tty_wait_until_sent() calls
668 * serial_chars_in_buffer() which deadlocks on the second semaphore
669 * acquisition. This should be fixed at some point. Greg's been
670 * notified.
671 if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
672 tty_wait_until_sent(port->tty, CLOSING_DELAY);
673 }
674 */
675
676 tty_driver_flush_buffer(port->tty);
677 tty_ldisc_flush(port->tty);
678
679 firm_report_tx_done(port);
680
681 firm_close(port);
682
683 /* shutdown our bulk reads and writes */
684 mutex_lock(&info->deathwarrant);
685 spin_lock_irq(&info->lock);
686 list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
687 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
688 urb = wrap->urb;
689 list_del(tmp);
690 spin_unlock_irq(&info->lock);
691 usb_kill_urb(urb);
692 spin_lock_irq(&info->lock);
693 list_add(tmp, &info->rx_urbs_free);
694 }
695 list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
696 list_move(tmp, &info->rx_urbs_free);
697 list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
698 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
699 urb = wrap->urb;
700 list_del(tmp);
701 spin_unlock_irq(&info->lock);
702 usb_kill_urb(urb);
703 spin_lock_irq(&info->lock);
704 list_add(tmp, &info->tx_urbs_free);
705 }
706 spin_unlock_irq(&info->lock);
707 mutex_unlock(&info->deathwarrant);
708
709 stop_command_port(port->serial);
710
711 port->tty->closing = 0;
712 }
713
714
715 static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count)
716 {
717 struct usb_serial *serial = port->serial;
718 struct whiteheat_private *info = usb_get_serial_port_data(port);
719 struct whiteheat_urb_wrap *wrap;
720 struct urb *urb;
721 int result;
722 int bytes;
723 int sent = 0;
724 unsigned long flags;
725 struct list_head *tmp;
726
727 dbg("%s - port %d", __func__, port->number);
728
729 if (count == 0) {
730 dbg("%s - write request of 0 bytes", __func__);
731 return (0);
732 }
733
734 while (count) {
735 spin_lock_irqsave(&info->lock, flags);
736 if (list_empty(&info->tx_urbs_free)) {
737 spin_unlock_irqrestore(&info->lock, flags);
738 break;
739 }
740 tmp = list_first(&info->tx_urbs_free);
741 list_del(tmp);
742 spin_unlock_irqrestore(&info->lock, flags);
743
744 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
745 urb = wrap->urb;
746 bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
747 memcpy (urb->transfer_buffer, buf + sent, bytes);
748
749 usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer);
750
751 urb->dev = serial->dev;
752 urb->transfer_buffer_length = bytes;
753 result = usb_submit_urb(urb, GFP_ATOMIC);
754 if (result) {
755 err("%s - failed submitting write urb, error %d", __func__, result);
756 sent = result;
757 spin_lock_irqsave(&info->lock, flags);
758 list_add(tmp, &info->tx_urbs_free);
759 spin_unlock_irqrestore(&info->lock, flags);
760 break;
761 } else {
762 sent += bytes;
763 count -= bytes;
764 spin_lock_irqsave(&info->lock, flags);
765 list_add(tmp, &info->tx_urbs_submitted);
766 spin_unlock_irqrestore(&info->lock, flags);
767 }
768 }
769
770 return sent;
771 }
772
773
774 static int whiteheat_write_room(struct usb_serial_port *port)
775 {
776 struct whiteheat_private *info = usb_get_serial_port_data(port);
777 struct list_head *tmp;
778 int room = 0;
779 unsigned long flags;
780
781 dbg("%s - port %d", __func__, port->number);
782
783 spin_lock_irqsave(&info->lock, flags);
784 list_for_each(tmp, &info->tx_urbs_free)
785 room++;
786 spin_unlock_irqrestore(&info->lock, flags);
787 room *= port->bulk_out_size;
788
789 dbg("%s - returns %d", __func__, room);
790 return (room);
791 }
792
793
794 static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
795 {
796 struct whiteheat_private *info = usb_get_serial_port_data(port);
797 unsigned int modem_signals = 0;
798
799 dbg("%s - port %d", __func__, port->number);
800
801 firm_get_dtr_rts(port);
802 if (info->mcr & UART_MCR_DTR)
803 modem_signals |= TIOCM_DTR;
804 if (info->mcr & UART_MCR_RTS)
805 modem_signals |= TIOCM_RTS;
806
807 return modem_signals;
808 }
809
810
811 static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
812 unsigned int set, unsigned int clear)
813 {
814 struct whiteheat_private *info = usb_get_serial_port_data(port);
815
816 dbg("%s - port %d", __func__, port->number);
817
818 if (set & TIOCM_RTS)
819 info->mcr |= UART_MCR_RTS;
820 if (set & TIOCM_DTR)
821 info->mcr |= UART_MCR_DTR;
822
823 if (clear & TIOCM_RTS)
824 info->mcr &= ~UART_MCR_RTS;
825 if (clear & TIOCM_DTR)
826 info->mcr &= ~UART_MCR_DTR;
827
828 firm_set_dtr(port, info->mcr & UART_MCR_DTR);
829 firm_set_rts(port, info->mcr & UART_MCR_RTS);
830 return 0;
831 }
832
833
834 static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
835 {
836 struct serial_struct serstruct;
837 void __user *user_arg = (void __user *)arg;
838
839 dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
840
841 switch (cmd) {
842 case TIOCGSERIAL:
843 memset(&serstruct, 0, sizeof(serstruct));
844 serstruct.type = PORT_16654;
845 serstruct.line = port->serial->minor;
846 serstruct.port = port->number;
847 serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
848 serstruct.xmit_fifo_size = port->bulk_out_size;
849 serstruct.custom_divisor = 0;
850 serstruct.baud_base = 460800;
851 serstruct.close_delay = CLOSING_DELAY;
852 serstruct.closing_wait = CLOSING_DELAY;
853
854 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
855 return -EFAULT;
856
857 break;
858
859 case TIOCSSERIAL:
860 if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
861 return -EFAULT;
862
863 /*
864 * For now this is ignored. dip sets the ASYNC_[V]HI flags
865 * but this isn't used by us at all. Maybe someone somewhere
866 * will need the custom_divisor setting.
867 */
868
869 break;
870
871 default:
872 break;
873 }
874
875 return -ENOIOCTLCMD;
876 }
877
878
879 static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
880 {
881 dbg("%s -port %d", __func__, port->number);
882 firm_setup_port(port);
883 }
884
885
886 static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) {
887 firm_set_break(port, break_state);
888 }
889
890
891 static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
892 {
893 struct whiteheat_private *info = usb_get_serial_port_data(port);
894 struct list_head *tmp;
895 struct whiteheat_urb_wrap *wrap;
896 int chars = 0;
897 unsigned long flags;
898
899 dbg("%s - port %d", __func__, port->number);
900
901 spin_lock_irqsave(&info->lock, flags);
902 list_for_each(tmp, &info->tx_urbs_submitted) {
903 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
904 chars += wrap->urb->transfer_buffer_length;
905 }
906 spin_unlock_irqrestore(&info->lock, flags);
907
908 dbg ("%s - returns %d", __func__, chars);
909 return chars;
910 }
911
912
913 static void whiteheat_throttle (struct usb_serial_port *port)
914 {
915 struct whiteheat_private *info = usb_get_serial_port_data(port);
916 unsigned long flags;
917
918 dbg("%s - port %d", __func__, port->number);
919
920 spin_lock_irqsave(&info->lock, flags);
921 info->flags |= THROTTLED;
922 spin_unlock_irqrestore(&info->lock, flags);
923
924 return;
925 }
926
927
928 static void whiteheat_unthrottle (struct usb_serial_port *port)
929 {
930 struct whiteheat_private *info = usb_get_serial_port_data(port);
931 int actually_throttled;
932 unsigned long flags;
933
934 dbg("%s - port %d", __func__, port->number);
935
936 spin_lock_irqsave(&info->lock, flags);
937 actually_throttled = info->flags & ACTUALLY_THROTTLED;
938 info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
939 spin_unlock_irqrestore(&info->lock, flags);
940
941 if (actually_throttled)
942 rx_data_softint(&info->rx_work);
943
944 return;
945 }
946
947
948 /*****************************************************************************
949 * Connect Tech's White Heat callback routines
950 *****************************************************************************/
951 static void command_port_write_callback(struct urb *urb)
952 {
953 int status = urb->status;
954
955 dbg("%s", __func__);
956
957 if (status) {
958 dbg("nonzero urb status: %d", status);
959 return;
960 }
961 }
962
963
964 static void command_port_read_callback(struct urb *urb)
965 {
966 struct usb_serial_port *command_port = urb->context;
967 struct whiteheat_command_private *command_info;
968 int status = urb->status;
969 unsigned char *data = urb->transfer_buffer;
970 int result;
971
972 dbg("%s", __func__);
973
974 command_info = usb_get_serial_port_data(command_port);
975 if (!command_info) {
976 dbg ("%s - command_info is NULL, exiting.", __func__);
977 return;
978 }
979 if (status) {
980 dbg("%s - nonzero urb status: %d", __func__, status);
981 if (status != -ENOENT)
982 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
983 wake_up(&command_info->wait_command);
984 return;
985 }
986
987 usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data);
988
989 if (data[0] == WHITEHEAT_CMD_COMPLETE) {
990 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
991 wake_up(&command_info->wait_command);
992 } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
993 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
994 wake_up(&command_info->wait_command);
995 } else if (data[0] == WHITEHEAT_EVENT) {
996 /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
997 dbg("%s - event received", __func__);
998 } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
999 memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
1000 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1001 wake_up(&command_info->wait_command);
1002 } else {
1003 dbg("%s - bad reply from firmware", __func__);
1004 }
1005
1006 /* Continue trying to always read */
1007 command_port->read_urb->dev = command_port->serial->dev;
1008 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
1009 if (result)
1010 dbg("%s - failed resubmitting read urb, error %d", __func__, result);
1011 }
1012
1013
1014 static void whiteheat_read_callback(struct urb *urb)
1015 {
1016 struct usb_serial_port *port = urb->context;
1017 struct whiteheat_urb_wrap *wrap;
1018 unsigned char *data = urb->transfer_buffer;
1019 struct whiteheat_private *info = usb_get_serial_port_data(port);
1020 int status = urb->status;
1021
1022 dbg("%s - port %d", __func__, port->number);
1023
1024 spin_lock(&info->lock);
1025 wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
1026 if (!wrap) {
1027 spin_unlock(&info->lock);
1028 err("%s - Not my urb!", __func__);
1029 return;
1030 }
1031 list_del(&wrap->list);
1032 spin_unlock(&info->lock);
1033
1034 if (status) {
1035 dbg("%s - nonzero read bulk status received: %d",
1036 __func__, status);
1037 spin_lock(&info->lock);
1038 list_add(&wrap->list, &info->rx_urbs_free);
1039 spin_unlock(&info->lock);
1040 return;
1041 }
1042
1043 usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
1044
1045 spin_lock(&info->lock);
1046 list_add_tail(&wrap->list, &info->rx_urb_q);
1047 if (info->flags & THROTTLED) {
1048 info->flags |= ACTUALLY_THROTTLED;
1049 spin_unlock(&info->lock);
1050 return;
1051 }
1052 spin_unlock(&info->lock);
1053
1054 schedule_work(&info->rx_work);
1055 }
1056
1057
1058 static void whiteheat_write_callback(struct urb *urb)
1059 {
1060 struct usb_serial_port *port = urb->context;
1061 struct whiteheat_private *info = usb_get_serial_port_data(port);
1062 struct whiteheat_urb_wrap *wrap;
1063 int status = urb->status;
1064
1065 dbg("%s - port %d", __func__, port->number);
1066
1067 spin_lock(&info->lock);
1068 wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
1069 if (!wrap) {
1070 spin_unlock(&info->lock);
1071 err("%s - Not my urb!", __func__);
1072 return;
1073 }
1074 list_move(&wrap->list, &info->tx_urbs_free);
1075 spin_unlock(&info->lock);
1076
1077 if (status) {
1078 dbg("%s - nonzero write bulk status received: %d",
1079 __func__, status);
1080 return;
1081 }
1082
1083 usb_serial_port_softint(port);
1084 }
1085
1086
1087 /*****************************************************************************
1088 * Connect Tech's White Heat firmware interface
1089 *****************************************************************************/
1090 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize)
1091 {
1092 struct usb_serial_port *command_port;
1093 struct whiteheat_command_private *command_info;
1094 struct whiteheat_private *info;
1095 __u8 *transfer_buffer;
1096 int retval = 0;
1097 int t;
1098
1099 dbg("%s - command %d", __func__, command);
1100
1101 command_port = port->serial->port[COMMAND_PORT];
1102 command_info = usb_get_serial_port_data(command_port);
1103 mutex_lock(&command_info->mutex);
1104 command_info->command_finished = false;
1105
1106 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
1107 transfer_buffer[0] = command;
1108 memcpy (&transfer_buffer[1], data, datasize);
1109 command_port->write_urb->transfer_buffer_length = datasize + 1;
1110 command_port->write_urb->dev = port->serial->dev;
1111 retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
1112 if (retval) {
1113 dbg("%s - submit urb failed", __func__);
1114 goto exit;
1115 }
1116
1117 /* wait for the command to complete */
1118 t = wait_event_timeout(command_info->wait_command,
1119 (bool)command_info->command_finished, COMMAND_TIMEOUT);
1120 if (!t)
1121 usb_kill_urb(command_port->write_urb);
1122
1123 if (command_info->command_finished == false) {
1124 dbg("%s - command timed out.", __func__);
1125 retval = -ETIMEDOUT;
1126 goto exit;
1127 }
1128
1129 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
1130 dbg("%s - command failed.", __func__);
1131 retval = -EIO;
1132 goto exit;
1133 }
1134
1135 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
1136 dbg("%s - command completed.", __func__);
1137 switch (command) {
1138 case WHITEHEAT_GET_DTR_RTS:
1139 info = usb_get_serial_port_data(port);
1140 memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info));
1141 break;
1142 }
1143 }
1144
1145 exit:
1146 mutex_unlock(&command_info->mutex);
1147 return retval;
1148 }
1149
1150
1151 static int firm_open(struct usb_serial_port *port) {
1152 struct whiteheat_simple open_command;
1153
1154 open_command.port = port->number - port->serial->minor + 1;
1155 return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command));
1156 }
1157
1158
1159 static int firm_close(struct usb_serial_port *port) {
1160 struct whiteheat_simple close_command;
1161
1162 close_command.port = port->number - port->serial->minor + 1;
1163 return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command));
1164 }
1165
1166
1167 static int firm_setup_port(struct usb_serial_port *port) {
1168 struct whiteheat_port_settings port_settings;
1169 unsigned int cflag = port->tty->termios->c_cflag;
1170
1171 port_settings.port = port->number + 1;
1172
1173 /* get the byte size */
1174 switch (cflag & CSIZE) {
1175 case CS5: port_settings.bits = 5; break;
1176 case CS6: port_settings.bits = 6; break;
1177 case CS7: port_settings.bits = 7; break;
1178 default:
1179 case CS8: port_settings.bits = 8; break;
1180 }
1181 dbg("%s - data bits = %d", __func__, port_settings.bits);
1182
1183 /* determine the parity */
1184 if (cflag & PARENB)
1185 if (cflag & CMSPAR)
1186 if (cflag & PARODD)
1187 port_settings.parity = WHITEHEAT_PAR_MARK;
1188 else
1189 port_settings.parity = WHITEHEAT_PAR_SPACE;
1190 else
1191 if (cflag & PARODD)
1192 port_settings.parity = WHITEHEAT_PAR_ODD;
1193 else
1194 port_settings.parity = WHITEHEAT_PAR_EVEN;
1195 else
1196 port_settings.parity = WHITEHEAT_PAR_NONE;
1197 dbg("%s - parity = %c", __func__, port_settings.parity);
1198
1199 /* figure out the stop bits requested */
1200 if (cflag & CSTOPB)
1201 port_settings.stop = 2;
1202 else
1203 port_settings.stop = 1;
1204 dbg("%s - stop bits = %d", __func__, port_settings.stop);
1205
1206 /* figure out the flow control settings */
1207 if (cflag & CRTSCTS)
1208 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
1209 else
1210 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
1211 dbg("%s - hardware flow control = %s %s %s %s", __func__,
1212 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
1213 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
1214 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
1215 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
1216
1217 /* determine software flow control */
1218 if (I_IXOFF(port->tty))
1219 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
1220 else
1221 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
1222 dbg("%s - software flow control = %c", __func__, port_settings.sflow);
1223
1224 port_settings.xon = START_CHAR(port->tty);
1225 port_settings.xoff = STOP_CHAR(port->tty);
1226 dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
1227
1228 /* get the baud rate wanted */
1229 port_settings.baud = tty_get_baud_rate(port->tty);
1230 dbg("%s - baud rate = %d", __func__, port_settings.baud);
1231
1232 /* fixme: should set validated settings */
1233 tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
1234 /* handle any settings that aren't specified in the tty structure */
1235 port_settings.lloop = 0;
1236
1237 /* now send the message to the device */
1238 return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings));
1239 }
1240
1241
1242 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) {
1243 struct whiteheat_set_rdb rts_command;
1244
1245 rts_command.port = port->number - port->serial->minor + 1;
1246 rts_command.state = onoff;
1247 return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command));
1248 }
1249
1250
1251 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) {
1252 struct whiteheat_set_rdb dtr_command;
1253
1254 dtr_command.port = port->number - port->serial->minor + 1;
1255 dtr_command.state = onoff;
1256 return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command));
1257 }
1258
1259
1260 static int firm_set_break(struct usb_serial_port *port, __u8 onoff) {
1261 struct whiteheat_set_rdb break_command;
1262
1263 break_command.port = port->number - port->serial->minor + 1;
1264 break_command.state = onoff;
1265 return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command));
1266 }
1267
1268
1269 static int firm_purge(struct usb_serial_port *port, __u8 rxtx) {
1270 struct whiteheat_purge purge_command;
1271
1272 purge_command.port = port->number - port->serial->minor + 1;
1273 purge_command.what = rxtx;
1274 return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command));
1275 }
1276
1277
1278 static int firm_get_dtr_rts(struct usb_serial_port *port) {
1279 struct whiteheat_simple get_dr_command;
1280
1281 get_dr_command.port = port->number - port->serial->minor + 1;
1282 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command));
1283 }
1284
1285
1286 static int firm_report_tx_done(struct usb_serial_port *port) {
1287 struct whiteheat_simple close_command;
1288
1289 close_command.port = port->number - port->serial->minor + 1;
1290 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command));
1291 }
1292
1293
1294 /*****************************************************************************
1295 * Connect Tech's White Heat utility functions
1296 *****************************************************************************/
1297 static int start_command_port(struct usb_serial *serial)
1298 {
1299 struct usb_serial_port *command_port;
1300 struct whiteheat_command_private *command_info;
1301 int retval = 0;
1302
1303 command_port = serial->port[COMMAND_PORT];
1304 command_info = usb_get_serial_port_data(command_port);
1305 mutex_lock(&command_info->mutex);
1306 if (!command_info->port_running) {
1307 /* Work around HCD bugs */
1308 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
1309
1310 command_port->read_urb->dev = serial->dev;
1311 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
1312 if (retval) {
1313 err("%s - failed submitting read urb, error %d", __func__, retval);
1314 goto exit;
1315 }
1316 }
1317 command_info->port_running++;
1318
1319 exit:
1320 mutex_unlock(&command_info->mutex);
1321 return retval;
1322 }
1323
1324
1325 static void stop_command_port(struct usb_serial *serial)
1326 {
1327 struct usb_serial_port *command_port;
1328 struct whiteheat_command_private *command_info;
1329
1330 command_port = serial->port[COMMAND_PORT];
1331 command_info = usb_get_serial_port_data(command_port);
1332 mutex_lock(&command_info->mutex);
1333 command_info->port_running--;
1334 if (!command_info->port_running)
1335 usb_kill_urb(command_port->read_urb);
1336 mutex_unlock(&command_info->mutex);
1337 }
1338
1339
1340 static int start_port_read(struct usb_serial_port *port)
1341 {
1342 struct whiteheat_private *info = usb_get_serial_port_data(port);
1343 struct whiteheat_urb_wrap *wrap;
1344 struct urb *urb;
1345 int retval = 0;
1346 unsigned long flags;
1347 struct list_head *tmp;
1348 struct list_head *tmp2;
1349
1350 spin_lock_irqsave(&info->lock, flags);
1351
1352 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
1353 list_del(tmp);
1354 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1355 urb = wrap->urb;
1356 urb->dev = port->serial->dev;
1357 spin_unlock_irqrestore(&info->lock, flags);
1358 retval = usb_submit_urb(urb, GFP_KERNEL);
1359 if (retval) {
1360 spin_lock_irqsave(&info->lock, flags);
1361 list_add(tmp, &info->rx_urbs_free);
1362 list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
1363 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1364 urb = wrap->urb;
1365 list_del(tmp);
1366 spin_unlock_irqrestore(&info->lock, flags);
1367 usb_kill_urb(urb);
1368 spin_lock_irqsave(&info->lock, flags);
1369 list_add(tmp, &info->rx_urbs_free);
1370 }
1371 break;
1372 }
1373 spin_lock_irqsave(&info->lock, flags);
1374 list_add(tmp, &info->rx_urbs_submitted);
1375 }
1376
1377 spin_unlock_irqrestore(&info->lock, flags);
1378
1379 return retval;
1380 }
1381
1382
1383 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head)
1384 {
1385 struct whiteheat_urb_wrap *wrap;
1386 struct list_head *tmp;
1387
1388 list_for_each(tmp, head) {
1389 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1390 if (wrap->urb == urb)
1391 return wrap;
1392 }
1393
1394 return NULL;
1395 }
1396
1397
1398 static struct list_head *list_first(struct list_head *head)
1399 {
1400 return head->next;
1401 }
1402
1403
1404 static void rx_data_softint(struct work_struct *work)
1405 {
1406 struct whiteheat_private *info =
1407 container_of(work, struct whiteheat_private, rx_work);
1408 struct usb_serial_port *port = info->port;
1409 struct tty_struct *tty = port->tty;
1410 struct whiteheat_urb_wrap *wrap;
1411 struct urb *urb;
1412 unsigned long flags;
1413 struct list_head *tmp;
1414 struct list_head *tmp2;
1415 int result;
1416 int sent = 0;
1417
1418 spin_lock_irqsave(&info->lock, flags);
1419 if (info->flags & THROTTLED) {
1420 spin_unlock_irqrestore(&info->lock, flags);
1421 return;
1422 }
1423
1424 list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
1425 list_del(tmp);
1426 spin_unlock_irqrestore(&info->lock, flags);
1427
1428 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1429 urb = wrap->urb;
1430
1431 if (tty && urb->actual_length) {
1432 int len = tty_buffer_request_room(tty, urb->actual_length);
1433 /* This stuff can go away now I suspect */
1434 if (unlikely(len < urb->actual_length)) {
1435 spin_lock_irqsave(&info->lock, flags);
1436 list_add(tmp, &info->rx_urb_q);
1437 spin_unlock_irqrestore(&info->lock, flags);
1438 tty_flip_buffer_push(tty);
1439 schedule_work(&info->rx_work);
1440 return;
1441 }
1442 tty_insert_flip_string(tty, urb->transfer_buffer, len);
1443 sent += len;
1444 }
1445
1446 urb->dev = port->serial->dev;
1447 result = usb_submit_urb(urb, GFP_ATOMIC);
1448 if (result) {
1449 err("%s - failed resubmitting read urb, error %d", __func__, result);
1450 spin_lock_irqsave(&info->lock, flags);
1451 list_add(tmp, &info->rx_urbs_free);
1452 continue;
1453 }
1454
1455 spin_lock_irqsave(&info->lock, flags);
1456 list_add(tmp, &info->rx_urbs_submitted);
1457 }
1458 spin_unlock_irqrestore(&info->lock, flags);
1459
1460 if (sent)
1461 tty_flip_buffer_push(tty);
1462 }
1463
1464
1465 /*****************************************************************************
1466 * Connect Tech's White Heat module functions
1467 *****************************************************************************/
1468 static int __init whiteheat_init (void)
1469 {
1470 int retval;
1471 retval = usb_serial_register(&whiteheat_fake_device);
1472 if (retval)
1473 goto failed_fake_register;
1474 retval = usb_serial_register(&whiteheat_device);
1475 if (retval)
1476 goto failed_device_register;
1477 retval = usb_register(&whiteheat_driver);
1478 if (retval)
1479 goto failed_usb_register;
1480 info(DRIVER_DESC " " DRIVER_VERSION);
1481 return 0;
1482 failed_usb_register:
1483 usb_serial_deregister(&whiteheat_device);
1484 failed_device_register:
1485 usb_serial_deregister(&whiteheat_fake_device);
1486 failed_fake_register:
1487 return retval;
1488 }
1489
1490
1491 static void __exit whiteheat_exit (void)
1492 {
1493 usb_deregister (&whiteheat_driver);
1494 usb_serial_deregister (&whiteheat_fake_device);
1495 usb_serial_deregister (&whiteheat_device);
1496 }
1497
1498
1499 module_init(whiteheat_init);
1500 module_exit(whiteheat_exit);
1501
1502 MODULE_AUTHOR( DRIVER_AUTHOR );
1503 MODULE_DESCRIPTION( DRIVER_DESC );
1504 MODULE_LICENSE("GPL");
1505
1506 module_param(urb_pool_size, int, 0);
1507 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
1508
1509 module_param(debug, bool, S_IRUGO | S_IWUSR);
1510 MODULE_PARM_DESC(debug, "Debug enabled or not");
Mirror for ia64_pv_ops.git