drivers/usb/host/ohci-at91.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  *  Copyright (C) 2004 SAN People (Pty) Ltd.
   5  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   6  *
   7  * AT91 Bus Glue
   8  *
   9  * Based on fragments of 2.4 driver by Rick Bronson.
  10  * Based on ohci-omap.c
  11  *
  12  * This file is licenced under the GPL.
  13  */
  14
  15 #include <linux/clk.h>
  16 #include <linux/platform_device.h>
  17
  18 #include <asm/mach-types.h>
  19 #include <asm/hardware.h>
  20 #include <asm/arch/board.h>
  21 #include <asm/arch/cpu.h>
  22
  23 #ifndef CONFIG_ARCH_AT91
  24 #error "CONFIG_ARCH_AT91 must be defined."
  25 #endif
  26
  27 /* interface and function clocks; sometimes also an AHB clock */
  28 static struct clk *iclk, *fclk, *hclk;
  29 static int clocked;
  30
  31 extern int usb_disabled(void);
  32
  33 /*-------------------------------------------------------------------------*/
  34
  35 static void at91_start_clock(void)
  36 {
  37         if (cpu_is_at91sam9261())
  38                 clk_enable(hclk);
  39         clk_enable(iclk);
  40         clk_enable(fclk);
  41         clocked = 1;
  42 }
  43
  44 static void at91_stop_clock(void)
  45 {
  46         clk_disable(fclk);
  47         clk_disable(iclk);
  48         if (cpu_is_at91sam9261())
  49                 clk_disable(hclk);
  50         clocked = 0;
  51 }
  52
  53 static void at91_start_hc(struct platform_device *pdev)
  54 {
  55         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  56         struct ohci_regs __iomem *regs = hcd->regs;
  57
  58         dev_dbg(&pdev->dev, "start\n");
  59
  60         /*
  61          * Start the USB clocks.
  62          */
  63         at91_start_clock();
  64
  65         /*
  66          * The USB host controller must remain in reset.
  67          */
  68         writel(0, &regs->control);
  69 }
  70
  71 static void at91_stop_hc(struct platform_device *pdev)
  72 {
  73         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  74         struct ohci_regs __iomem *regs = hcd->regs;
  75
  76         dev_dbg(&pdev->dev, "stop\n");
  77
  78         /*
  79          * Put the USB host controller into reset.
  80          */
  81         writel(0, &regs->control);
  82
  83         /*
  84          * Stop the USB clocks.
  85          */
  86         at91_stop_clock();
  87 }
  88
  89
  90 /*-------------------------------------------------------------------------*/
  91
  92 static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
  93
  94 /* configure so an HC device and id are always provided */
  95 /* always called with process context; sleeping is OK */
  96
  97
  98 /**
  99  * usb_hcd_at91_probe - initialize AT91-based HCDs
 100  * Context: !in_interrupt()
 101  *
 102  * Allocates basic resources for this USB host controller, and
 103  * then invokes the start() method for the HCD associated with it
 104  * through the hotplug entry's driver_data.
 105  */
 106 static int usb_hcd_at91_probe(const struct hc_driver *driver,
 107                         struct platform_device *pdev)
 108 {
 109         int retval;
 110         struct usb_hcd *hcd = NULL;
 111
 112         if (pdev->num_resources != 2) {
 113                 pr_debug("hcd probe: invalid num_resources");
 114                 return -ENODEV;
 115         }
 116
 117         if ((pdev->resource[0].flags != IORESOURCE_MEM)
 118                         || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
 119                 pr_debug("hcd probe: invalid resource type\n");
 120                 return -ENODEV;
 121         }
 122
 123         hcd = usb_create_hcd(driver, &pdev->dev, "at91");
 124         if (!hcd)
 125                 return -ENOMEM;
 126         hcd->rsrc_start = pdev->resource[0].start;
 127         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 128
 129         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 130                 pr_debug("request_mem_region failed\n");
 131                 retval = -EBUSY;
 132                 goto err1;
 133         }
 134
 135         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 136         if (!hcd->regs) {
 137                 pr_debug("ioremap failed\n");
 138                 retval = -EIO;
 139                 goto err2;
 140         }
 141
 142         iclk = clk_get(&pdev->dev, "ohci_clk");
 143         fclk = clk_get(&pdev->dev, "uhpck");
 144         if (cpu_is_at91sam9261())
 145                 hclk = clk_get(&pdev->dev, "hck0");
 146
 147         at91_start_hc(pdev);
 148         ohci_hcd_init(hcd_to_ohci(hcd));
 149
 150         retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
 151         if (retval == 0)
 152                 return retval;
 153
 154         /* Error handling */
 155         at91_stop_hc(pdev);
 156
 157         if (cpu_is_at91sam9261())
 158                 clk_put(hclk);
 159         clk_put(fclk);
 160         clk_put(iclk);
 161
 162         iounmap(hcd->regs);
 163
 164  err2:
 165         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 166
 167  err1:
 168         usb_put_hcd(hcd);
 169         return retval;
 170 }
 171
 172
 173 /* may be called with controller, bus, and devices active */
 174
 175 /**
 176  * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
 177  * @dev: USB Host Controller being removed
 178  * Context: !in_interrupt()
 179  *
 180  * Reverses the effect of usb_hcd_at91_probe(), first invoking
 181  * the HCD's stop() method.  It is always called from a thread
 182  * context, "rmmod" or something similar.
 183  *
 184  */
 185 static int usb_hcd_at91_remove(struct usb_hcd *hcd,
 186                                 struct platform_device *pdev)
 187 {
 188         usb_remove_hcd(hcd);
 189         at91_stop_hc(pdev);
 190         iounmap(hcd->regs);
 191         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 192
 193         if (cpu_is_at91sam9261())
 194                 clk_put(hclk);
 195         clk_put(fclk);
 196         clk_put(iclk);
 197         fclk = iclk = hclk = NULL;
 198
 199         dev_set_drvdata(&pdev->dev, NULL);
 200         return 0;
 201 }
 202
 203 /*-------------------------------------------------------------------------*/
 204
 205 static int __devinit
 206 ohci_at91_start (struct usb_hcd *hcd)
 207 {
 208         struct at91_usbh_data   *board = hcd->self.controller->platform_data;
 209         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 210         int                     ret;
 211
 212         if ((ret = ohci_init(ohci)) < 0)
 213                 return ret;
 214
 215         ohci->num_ports = board->ports;
 216
 217         if ((ret = ohci_run(ohci)) < 0) {
 218                 err("can't start %s", hcd->self.bus_name);
 219                 ohci_stop(hcd);
 220                 return ret;
 221         }
 222         return 0;
 223 }
 224
 225 /*-------------------------------------------------------------------------*/
 226
 227 static const struct hc_driver ohci_at91_hc_driver = {
 228         .description =          hcd_name,
 229         .product_desc =         "AT91 OHCI",
 230         .hcd_priv_size =        sizeof(struct ohci_hcd),
 231
 232         /*
 233          * generic hardware linkage
 234          */
 235         .irq =                  ohci_irq,
 236         .flags =                HCD_USB11 | HCD_MEMORY,
 237
 238         /*
 239          * basic lifecycle operations
 240          */
 241         .start =                ohci_at91_start,
 242         .stop =                 ohci_stop,
 243         .shutdown =             ohci_shutdown,
 244
 245         /*
 246          * managing i/o requests and associated device resources
 247          */
 248         .urb_enqueue =          ohci_urb_enqueue,
 249         .urb_dequeue =          ohci_urb_dequeue,
 250         .endpoint_disable =     ohci_endpoint_disable,
 251
 252         /*
 253          * scheduling support
 254          */
 255         .get_frame_number =     ohci_get_frame,
 256
 257         /*
 258          * root hub support
 259          */
 260         .hub_status_data =      ohci_hub_status_data,
 261         .hub_control =          ohci_hub_control,
 262         .hub_irq_enable =       ohci_rhsc_enable,
 263 #ifdef CONFIG_PM
 264         .bus_suspend =          ohci_bus_suspend,
 265         .bus_resume =           ohci_bus_resume,
 266 #endif
 267         .start_port_reset =     ohci_start_port_reset,
 268 };
 269
 270 /*-------------------------------------------------------------------------*/
 271
 272 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 273 {
 274         device_init_wakeup(&pdev->dev, 1);
 275         return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
 276 }
 277
 278 static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 279 {
 280         device_init_wakeup(&pdev->dev, 0);
 281         return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
 282 }
 283
 284 #ifdef CONFIG_PM
 285
 286 static int
 287 ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
 288 {
 289         struct usb_hcd  *hcd = platform_get_drvdata(pdev);
 290         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 291
 292         if (device_may_wakeup(&pdev->dev))
 293                 enable_irq_wake(hcd->irq);
 294
 295         /*
 296          * The integrated transceivers seem unable to notice disconnect,
 297          * reconnect, or wakeup without the 48 MHz clock active.  so for
 298          * correctness, always discard connection state (using reset).
 299          *
 300          * REVISIT: some boards will be able to turn VBUS off...
 301          */
 302         if (at91_suspend_entering_slow_clock()) {
 303                 ohci_usb_reset (ohci);
 304                 at91_stop_clock();
 305         }
 306
 307         return 0;
 308 }
 309
 310 static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
 311 {
 312         struct usb_hcd  *hcd = platform_get_drvdata(pdev);
 313
 314         if (device_may_wakeup(&pdev->dev))
 315                 disable_irq_wake(hcd->irq);
 316
 317         if (!clocked)
 318                 at91_start_clock();
 319
 320         return 0;
 321 }
 322 #else
 323 #define ohci_hcd_at91_drv_suspend NULL
 324 #define ohci_hcd_at91_drv_resume  NULL
 325 #endif
 326
 327 MODULE_ALIAS("at91_ohci");
 328
 329 static struct platform_driver ohci_hcd_at91_driver = {
 330         .probe          = ohci_hcd_at91_drv_probe,
 331         .remove         = ohci_hcd_at91_drv_remove,
 332         .shutdown       = usb_hcd_platform_shutdown,
 333         .suspend        = ohci_hcd_at91_drv_suspend,
 334         .resume         = ohci_hcd_at91_drv_resume,
 335         .driver         = {
 336                 .name   = "at91_ohci",
 337                 .owner  = THIS_MODULE,
 338         },
 339 };
 340