e1000: Add device IDs of blade version of the 82571 quad port
[pv_ops_mirror.git] / include / asm-cris / rtc.h
blobcb4bf9217fee6e1155c70966280e32f776f60c68
1 /* $Id: rtc.h,v 1.7 2002/11/04 07:32:09 starvik Exp $ */
3 #ifndef __RTC_H__
4 #define __RTC_H__
8 #ifdef CONFIG_ETRAX_DS1302
9 /* Dallas DS1302 clock/calendar register numbers. */
10 # define RTC_SECONDS 0
11 # define RTC_MINUTES 1
12 # define RTC_HOURS 2
13 # define RTC_DAY_OF_MONTH 3
14 # define RTC_MONTH 4
15 # define RTC_WEEKDAY 5
16 # define RTC_YEAR 6
17 # define RTC_CONTROL 7
19 /* Bits in CONTROL register. */
20 # define RTC_CONTROL_WRITEPROTECT 0x80
21 # define RTC_TRICKLECHARGER 8
23 /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
24 # define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */
25 # define RTC_TCR_1DIOD 0x04 /* xxxx01xx */
26 # define RTC_TCR_2DIOD 0x08 /* xxxx10xx */
27 # define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */
28 # define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */
29 # define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */
30 # define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */
32 #elif defined(CONFIG_ETRAX_PCF8563)
33 /* I2C bus slave registers. */
34 # define RTC_I2C_READ 0xa3
35 # define RTC_I2C_WRITE 0xa2
37 /* Phillips PCF8563 registers. */
38 # define RTC_CONTROL1 0x00 /* Control/Status register 1. */
39 # define RTC_CONTROL2 0x01 /* Control/Status register 2. */
40 # define RTC_CLOCKOUT_FREQ 0x0d /* CLKOUT frequency. */
41 # define RTC_TIMER_CONTROL 0x0e /* Timer control. */
42 # define RTC_TIMER_CNTDOWN 0x0f /* Timer countdown. */
44 /* BCD encoded clock registers. */
45 # define RTC_SECONDS 0x02
46 # define RTC_MINUTES 0x03
47 # define RTC_HOURS 0x04
48 # define RTC_DAY_OF_MONTH 0x05
49 # define RTC_WEEKDAY 0x06 /* Not coded in BCD! */
50 # define RTC_MONTH 0x07
51 # define RTC_YEAR 0x08
52 # define RTC_MINUTE_ALARM 0x09
53 # define RTC_HOUR_ALARM 0x0a
54 # define RTC_DAY_ALARM 0x0b
55 # define RTC_WEEKDAY_ALARM 0x0c
57 #endif
59 #ifdef CONFIG_ETRAX_DS1302
60 extern unsigned char ds1302_readreg(int reg);
61 extern void ds1302_writereg(int reg, unsigned char val);
62 extern int ds1302_init(void);
63 # define CMOS_READ(x) ds1302_readreg(x)
64 # define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
65 # define RTC_INIT() ds1302_init()
66 #elif defined(CONFIG_ETRAX_PCF8563)
67 extern unsigned char pcf8563_readreg(int reg);
68 extern void pcf8563_writereg(int reg, unsigned char val);
69 extern int pcf8563_init(void);
70 # define CMOS_READ(x) pcf8563_readreg(x)
71 # define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val)
72 # define RTC_INIT() pcf8563_init()
73 #else
74 /* No RTC configured so we shouldn't try to access any. */
75 # define CMOS_READ(x) 42
76 # define CMOS_WRITE(x,y)
77 # define RTC_INIT() (-1)
78 #endif
81 * The struct used to pass data via the following ioctl. Similar to the
82 * struct tm in <time.h>, but it needs to be here so that the kernel
83 * source is self contained, allowing cross-compiles, etc. etc.
85 struct rtc_time {
86 int tm_sec;
87 int tm_min;
88 int tm_hour;
89 int tm_mday;
90 int tm_mon;
91 int tm_year;
92 int tm_wday;
93 int tm_yday;
94 int tm_isdst;
97 /* ioctl() calls that are permitted to the /dev/rtc interface. */
98 #define RTC_MAGIC 'p'
99 #define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) /* Read RTC time. */
100 #define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) /* Set RTC time. */
101 #define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int)
102 #define RTC_VLOW_RD _IOR(RTC_MAGIC, 0x11, int) /* Voltage Low detector */
103 #define RTC_VLOW_SET _IO(RTC_MAGIC, 0x12) /* Clear voltage low information */
104 #define RTC_MAX_IOCTL 0x12
106 #endif /* __RTC_H__ */