Handle tap fds with IFF_VNET_HDR
[qemu-kvm/fedora.git] / hw / ppc440.c
blobeb91688ffb53944ca997bfe0e4749dc5d5e85a15
1 /*
2 * Qemu PowerPC 440 board emualtion
4 * Copyright 2007 IBM Corporation.
5 * Authors: Jerone Young <jyoung5@us.ibm.com>
7 * This work is licensed under the GNU GPL license version 2 or later.
9 */
12 #include "hw.h"
13 #include "hw/isa.h"
14 #include "ppc440.h"
16 #define PPC440EP_PCI_CONFIG 0xeec00000
17 #define PPC440EP_PCI_INTACK 0xeed00000
18 #define PPC440EP_PCI_SPECIAL 0xeed00000
19 #define PPC440EP_PCI_REGS 0xef400000
20 #define PPC440EP_PCI_IO 0xe8000000
21 #define PPC440EP_PCI_IOLEN 0x10000
22 #define PPC440EP_PCI_MEM 0xa0000000
23 #define PPC440EP_PCI_MEMLEN 0x20000000
26 void ppc440ep_init(CPUState *env,
27 target_phys_addr_t ram_bases[2],
28 target_phys_addr_t ram_sizes[2],
29 qemu_irq **picp,
30 ppc4xx_pci_t **pcip,
31 int do_init)
33 ppc4xx_mmio_t *mmio;
34 qemu_irq *pic, *irqs;
35 ram_addr_t offset;
36 ppc4xx_pci_t *pci;
37 int i;
39 ppc_dcr_init(env, NULL, NULL);
41 /* mmio */
42 printf("setup mmio\n");
43 mmio = ppc4xx_mmio_init(env, 0xEF600000);
45 /* universal controller */
46 printf("setup universal controller\n");
47 irqs = qemu_mallocz(sizeof(qemu_irq) * PPCUIC_OUTPUT_NB);
48 irqs[PPCUIC_OUTPUT_INT] =
49 ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
50 irqs[PPCUIC_OUTPUT_CINT] =
51 ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
52 pic = ppcuic_init(env, irqs, 0x0C0, 0, 1);
53 *picp = pic;
55 /* SDRAM controller */
56 printf("trying to setup sdram controller\n");
57 /* XXX 440EP's ECC interrupts are on UIC1 */
58 ppc405_sdram_init(env, pic[14], 2, ram_bases, ram_sizes, do_init);
59 offset = 0;
60 for (i = 0; i < 2; i++)
61 offset += ram_sizes[i];
63 /* PCI */
64 pci = ppc4xx_pci_init(env, pic,
65 PPC440EP_PCI_CONFIG,
66 PPC440EP_PCI_INTACK,
67 PPC440EP_PCI_SPECIAL,
68 PPC440EP_PCI_REGS);
69 if (!pci)
70 printf("couldn't create PCI controller!\n");
71 *pcip = pci;
73 isa_mmio_init(PPC440EP_PCI_IO, PPC440EP_PCI_IOLEN);
75 /* serial ports on page 126 of 440EP user manual */
76 if (serial_hds[0]) {
77 printf("Initializing first serial port\n");
78 ppc405_serial_init(env, mmio,0x300, pic[0], serial_hds[0]);
80 if (serial_hds[1]) {
81 printf("Initializing 2nd serial port\n");
82 ppc405_serial_init(env, mmio,0x400, pic[1], serial_hds[1]);