microblaze: Dont segfault when singlestepping first insn.
[qemu/agraf.git] / hw / pflash_cfi02.c
blob135c85079761bb1e499668c9f5a54770d2879c4b
1 /*
2 * CFI parallel flash with AMD command set emulation
4 * Copyright (c) 2005 Jocelyn Mayer
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2 of the License, or (at your option) any later version.
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
21 * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
22 * Supported commands/modes are:
23 * - flash read
24 * - flash write
25 * - flash ID read
26 * - sector erase
27 * - chip erase
28 * - unlock bypass command
29 * - CFI queries
31 * It does not support flash interleaving.
32 * It does not implement boot blocs with reduced size
33 * It does not implement software data protection as found in many real chips
34 * It does not implement erase suspend/resume commands
35 * It does not implement multiple sectors erase
38 #include "hw.h"
39 #include "flash.h"
40 #include "qemu-timer.h"
41 #include "block.h"
43 //#define PFLASH_DEBUG
44 #ifdef PFLASH_DEBUG
45 #define DPRINTF(fmt, ...) \
46 do { \
47 printf("PFLASH: " fmt , ## __VA_ARGS__); \
48 } while (0)
49 #else
50 #define DPRINTF(fmt, ...) do { } while (0)
51 #endif
53 struct pflash_t {
54 BlockDriverState *bs;
55 target_phys_addr_t base;
56 uint32_t sector_len;
57 uint32_t chip_len;
58 int mappings;
59 int width;
60 int wcycle; /* if 0, the flash is read normally */
61 int bypass;
62 int ro;
63 uint8_t cmd;
64 uint8_t status;
65 uint16_t ident[4];
66 uint16_t unlock_addr[2];
67 uint8_t cfi_len;
68 uint8_t cfi_table[0x52];
69 QEMUTimer *timer;
70 ram_addr_t off;
71 int fl_mem;
72 int rom_mode;
73 void *storage;
76 static void pflash_register_memory(pflash_t *pfl, int rom_mode)
78 unsigned long phys_offset = pfl->fl_mem;
79 int i;
81 if (rom_mode)
82 phys_offset |= pfl->off | IO_MEM_ROMD;
83 pfl->rom_mode = rom_mode;
85 for (i = 0; i < pfl->mappings; i++)
86 cpu_register_physical_memory(pfl->base + i * pfl->chip_len,
87 pfl->chip_len, phys_offset);
90 static void pflash_timer (void *opaque)
92 pflash_t *pfl = opaque;
94 DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
95 /* Reset flash */
96 pfl->status ^= 0x80;
97 if (pfl->bypass) {
98 pfl->wcycle = 2;
99 } else {
100 pflash_register_memory(pfl, 1);
101 pfl->wcycle = 0;
103 pfl->cmd = 0;
106 static uint32_t pflash_read (pflash_t *pfl, uint32_t offset, int width)
108 uint32_t boff;
109 uint32_t ret;
110 uint8_t *p;
112 DPRINTF("%s: offset " TARGET_FMT_lx "\n", __func__, offset);
113 ret = -1;
114 if (pfl->rom_mode) {
115 /* Lazy reset of to ROMD mode */
116 if (pfl->wcycle == 0)
117 pflash_register_memory(pfl, 1);
119 offset &= pfl->chip_len - 1;
120 boff = offset & 0xFF;
121 if (pfl->width == 2)
122 boff = boff >> 1;
123 else if (pfl->width == 4)
124 boff = boff >> 2;
125 switch (pfl->cmd) {
126 default:
127 /* This should never happen : reset state & treat it as a read*/
128 DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
129 pfl->wcycle = 0;
130 pfl->cmd = 0;
131 case 0x80:
132 /* We accept reads during second unlock sequence... */
133 case 0x00:
134 flash_read:
135 /* Flash area read */
136 p = pfl->storage;
137 switch (width) {
138 case 1:
139 ret = p[offset];
140 // DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
141 break;
142 case 2:
143 #if defined(TARGET_WORDS_BIGENDIAN)
144 ret = p[offset] << 8;
145 ret |= p[offset + 1];
146 #else
147 ret = p[offset];
148 ret |= p[offset + 1] << 8;
149 #endif
150 // DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
151 break;
152 case 4:
153 #if defined(TARGET_WORDS_BIGENDIAN)
154 ret = p[offset] << 24;
155 ret |= p[offset + 1] << 16;
156 ret |= p[offset + 2] << 8;
157 ret |= p[offset + 3];
158 #else
159 ret = p[offset];
160 ret |= p[offset + 1] << 8;
161 ret |= p[offset + 2] << 16;
162 ret |= p[offset + 3] << 24;
163 #endif
164 // DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
165 break;
167 break;
168 case 0x90:
169 /* flash ID read */
170 switch (boff) {
171 case 0x00:
172 case 0x01:
173 ret = pfl->ident[boff & 0x01];
174 break;
175 case 0x02:
176 ret = 0x00; /* Pretend all sectors are unprotected */
177 break;
178 case 0x0E:
179 case 0x0F:
180 if (pfl->ident[2 + (boff & 0x01)] == (uint8_t)-1)
181 goto flash_read;
182 ret = pfl->ident[2 + (boff & 0x01)];
183 break;
184 default:
185 goto flash_read;
187 DPRINTF("%s: ID " TARGET_FMT_ld " %x\n", __func__, boff, ret);
188 break;
189 case 0xA0:
190 case 0x10:
191 case 0x30:
192 /* Status register read */
193 ret = pfl->status;
194 DPRINTF("%s: status %x\n", __func__, ret);
195 /* Toggle bit 6 */
196 pfl->status ^= 0x40;
197 break;
198 case 0x98:
199 /* CFI query mode */
200 if (boff > pfl->cfi_len)
201 ret = 0;
202 else
203 ret = pfl->cfi_table[boff];
204 break;
207 return ret;
210 /* update flash content on disk */
211 static void pflash_update(pflash_t *pfl, int offset,
212 int size)
214 int offset_end;
215 if (pfl->bs) {
216 offset_end = offset + size;
217 /* round to sectors */
218 offset = offset >> 9;
219 offset_end = (offset_end + 511) >> 9;
220 bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
221 offset_end - offset);
225 static void pflash_write (pflash_t *pfl, uint32_t offset, uint32_t value,
226 int width)
228 uint32_t boff;
229 uint8_t *p;
230 uint8_t cmd;
232 cmd = value;
233 if (pfl->cmd != 0xA0 && cmd == 0xF0) {
234 #if 0
235 DPRINTF("%s: flash reset asked (%02x %02x)\n",
236 __func__, pfl->cmd, cmd);
237 #endif
238 goto reset_flash;
240 DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d %d\n", __func__,
241 offset, value, width, pfl->wcycle);
242 offset &= pfl->chip_len - 1;
244 DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d\n", __func__,
245 offset, value, width);
246 boff = offset & (pfl->sector_len - 1);
247 if (pfl->width == 2)
248 boff = boff >> 1;
249 else if (pfl->width == 4)
250 boff = boff >> 2;
251 switch (pfl->wcycle) {
252 case 0:
253 /* Set the device in I/O access mode if required */
254 if (pfl->rom_mode)
255 pflash_register_memory(pfl, 0);
256 /* We're in read mode */
257 check_unlock0:
258 if (boff == 0x55 && cmd == 0x98) {
259 enter_CFI_mode:
260 /* Enter CFI query mode */
261 pfl->wcycle = 7;
262 pfl->cmd = 0x98;
263 return;
265 if (boff != pfl->unlock_addr[0] || cmd != 0xAA) {
266 DPRINTF("%s: unlock0 failed " TARGET_FMT_lx " %02x %04x\n",
267 __func__, boff, cmd, pfl->unlock_addr[0]);
268 goto reset_flash;
270 DPRINTF("%s: unlock sequence started\n", __func__);
271 break;
272 case 1:
273 /* We started an unlock sequence */
274 check_unlock1:
275 if (boff != pfl->unlock_addr[1] || cmd != 0x55) {
276 DPRINTF("%s: unlock1 failed " TARGET_FMT_lx " %02x\n", __func__,
277 boff, cmd);
278 goto reset_flash;
280 DPRINTF("%s: unlock sequence done\n", __func__);
281 break;
282 case 2:
283 /* We finished an unlock sequence */
284 if (!pfl->bypass && boff != pfl->unlock_addr[0]) {
285 DPRINTF("%s: command failed " TARGET_FMT_lx " %02x\n", __func__,
286 boff, cmd);
287 goto reset_flash;
289 switch (cmd) {
290 case 0x20:
291 pfl->bypass = 1;
292 goto do_bypass;
293 case 0x80:
294 case 0x90:
295 case 0xA0:
296 pfl->cmd = cmd;
297 DPRINTF("%s: starting command %02x\n", __func__, cmd);
298 break;
299 default:
300 DPRINTF("%s: unknown command %02x\n", __func__, cmd);
301 goto reset_flash;
303 break;
304 case 3:
305 switch (pfl->cmd) {
306 case 0x80:
307 /* We need another unlock sequence */
308 goto check_unlock0;
309 case 0xA0:
310 DPRINTF("%s: write data offset " TARGET_FMT_lx " %08x %d\n",
311 __func__, offset, value, width);
312 p = pfl->storage;
313 switch (width) {
314 case 1:
315 p[offset] &= value;
316 pflash_update(pfl, offset, 1);
317 break;
318 case 2:
319 #if defined(TARGET_WORDS_BIGENDIAN)
320 p[offset] &= value >> 8;
321 p[offset + 1] &= value;
322 #else
323 p[offset] &= value;
324 p[offset + 1] &= value >> 8;
325 #endif
326 pflash_update(pfl, offset, 2);
327 break;
328 case 4:
329 #if defined(TARGET_WORDS_BIGENDIAN)
330 p[offset] &= value >> 24;
331 p[offset + 1] &= value >> 16;
332 p[offset + 2] &= value >> 8;
333 p[offset + 3] &= value;
334 #else
335 p[offset] &= value;
336 p[offset + 1] &= value >> 8;
337 p[offset + 2] &= value >> 16;
338 p[offset + 3] &= value >> 24;
339 #endif
340 pflash_update(pfl, offset, 4);
341 break;
343 pfl->status = 0x00 | ~(value & 0x80);
344 /* Let's pretend write is immediate */
345 if (pfl->bypass)
346 goto do_bypass;
347 goto reset_flash;
348 case 0x90:
349 if (pfl->bypass && cmd == 0x00) {
350 /* Unlock bypass reset */
351 goto reset_flash;
353 /* We can enter CFI query mode from autoselect mode */
354 if (boff == 0x55 && cmd == 0x98)
355 goto enter_CFI_mode;
356 /* No break here */
357 default:
358 DPRINTF("%s: invalid write for command %02x\n",
359 __func__, pfl->cmd);
360 goto reset_flash;
362 case 4:
363 switch (pfl->cmd) {
364 case 0xA0:
365 /* Ignore writes while flash data write is occuring */
366 /* As we suppose write is immediate, this should never happen */
367 return;
368 case 0x80:
369 goto check_unlock1;
370 default:
371 /* Should never happen */
372 DPRINTF("%s: invalid command state %02x (wc 4)\n",
373 __func__, pfl->cmd);
374 goto reset_flash;
376 break;
377 case 5:
378 switch (cmd) {
379 case 0x10:
380 if (boff != pfl->unlock_addr[0]) {
381 DPRINTF("%s: chip erase: invalid address " TARGET_FMT_lx "\n",
382 __func__, offset);
383 goto reset_flash;
385 /* Chip erase */
386 DPRINTF("%s: start chip erase\n", __func__);
387 memset(pfl->storage, 0xFF, pfl->chip_len);
388 pfl->status = 0x00;
389 pflash_update(pfl, 0, pfl->chip_len);
390 /* Let's wait 5 seconds before chip erase is done */
391 qemu_mod_timer(pfl->timer,
392 qemu_get_clock(vm_clock) + (get_ticks_per_sec() * 5));
393 break;
394 case 0x30:
395 /* Sector erase */
396 p = pfl->storage;
397 offset &= ~(pfl->sector_len - 1);
398 DPRINTF("%s: start sector erase at " TARGET_FMT_lx "\n", __func__,
399 offset);
400 memset(p + offset, 0xFF, pfl->sector_len);
401 pflash_update(pfl, offset, pfl->sector_len);
402 pfl->status = 0x00;
403 /* Let's wait 1/2 second before sector erase is done */
404 qemu_mod_timer(pfl->timer,
405 qemu_get_clock(vm_clock) + (get_ticks_per_sec() / 2));
406 break;
407 default:
408 DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
409 goto reset_flash;
411 pfl->cmd = cmd;
412 break;
413 case 6:
414 switch (pfl->cmd) {
415 case 0x10:
416 /* Ignore writes during chip erase */
417 return;
418 case 0x30:
419 /* Ignore writes during sector erase */
420 return;
421 default:
422 /* Should never happen */
423 DPRINTF("%s: invalid command state %02x (wc 6)\n",
424 __func__, pfl->cmd);
425 goto reset_flash;
427 break;
428 case 7: /* Special value for CFI queries */
429 DPRINTF("%s: invalid write in CFI query mode\n", __func__);
430 goto reset_flash;
431 default:
432 /* Should never happen */
433 DPRINTF("%s: invalid write state (wc 7)\n", __func__);
434 goto reset_flash;
436 pfl->wcycle++;
438 return;
440 /* Reset flash */
441 reset_flash:
442 pfl->bypass = 0;
443 pfl->wcycle = 0;
444 pfl->cmd = 0;
445 return;
447 do_bypass:
448 pfl->wcycle = 2;
449 pfl->cmd = 0;
450 return;
454 static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
456 return pflash_read(opaque, addr, 1);
459 static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
461 pflash_t *pfl = opaque;
463 return pflash_read(pfl, addr, 2);
466 static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
468 pflash_t *pfl = opaque;
470 return pflash_read(pfl, addr, 4);
473 static void pflash_writeb (void *opaque, target_phys_addr_t addr,
474 uint32_t value)
476 pflash_write(opaque, addr, value, 1);
479 static void pflash_writew (void *opaque, target_phys_addr_t addr,
480 uint32_t value)
482 pflash_t *pfl = opaque;
484 pflash_write(pfl, addr, value, 2);
487 static void pflash_writel (void *opaque, target_phys_addr_t addr,
488 uint32_t value)
490 pflash_t *pfl = opaque;
492 pflash_write(pfl, addr, value, 4);
495 static CPUWriteMemoryFunc * const pflash_write_ops[] = {
496 &pflash_writeb,
497 &pflash_writew,
498 &pflash_writel,
501 static CPUReadMemoryFunc * const pflash_read_ops[] = {
502 &pflash_readb,
503 &pflash_readw,
504 &pflash_readl,
507 /* Count trailing zeroes of a 32 bits quantity */
508 static int ctz32 (uint32_t n)
510 int ret;
512 ret = 0;
513 if (!(n & 0xFFFF)) {
514 ret += 16;
515 n = n >> 16;
517 if (!(n & 0xFF)) {
518 ret += 8;
519 n = n >> 8;
521 if (!(n & 0xF)) {
522 ret += 4;
523 n = n >> 4;
525 if (!(n & 0x3)) {
526 ret += 2;
527 n = n >> 2;
529 if (!(n & 0x1)) {
530 ret++;
531 n = n >> 1;
533 #if 0 /* This is not necessary as n is never 0 */
534 if (!n)
535 ret++;
536 #endif
538 return ret;
541 pflash_t *pflash_cfi02_register(target_phys_addr_t base, ram_addr_t off,
542 BlockDriverState *bs, uint32_t sector_len,
543 int nb_blocs, int nb_mappings, int width,
544 uint16_t id0, uint16_t id1,
545 uint16_t id2, uint16_t id3,
546 uint16_t unlock_addr0, uint16_t unlock_addr1)
548 pflash_t *pfl;
549 int32_t chip_len;
550 int ret;
552 chip_len = sector_len * nb_blocs;
553 /* XXX: to be fixed */
554 #if 0
555 if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
556 total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
557 return NULL;
558 #endif
559 pfl = qemu_mallocz(sizeof(pflash_t));
560 /* FIXME: Allocate ram ourselves. */
561 pfl->storage = qemu_get_ram_ptr(off);
562 pfl->fl_mem = cpu_register_io_memory(pflash_read_ops, pflash_write_ops,
563 pfl);
564 pfl->off = off;
565 pfl->base = base;
566 pfl->chip_len = chip_len;
567 pfl->mappings = nb_mappings;
568 pflash_register_memory(pfl, 1);
569 pfl->bs = bs;
570 if (pfl->bs) {
571 /* read the initial flash content */
572 ret = bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9);
573 if (ret < 0) {
574 cpu_unregister_io_memory(pfl->fl_mem);
575 qemu_free(pfl);
576 return NULL;
579 #if 0 /* XXX: there should be a bit to set up read-only,
580 * the same way the hardware does (with WP pin).
582 pfl->ro = 1;
583 #else
584 pfl->ro = 0;
585 #endif
586 pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
587 pfl->sector_len = sector_len;
588 pfl->width = width;
589 pfl->wcycle = 0;
590 pfl->cmd = 0;
591 pfl->status = 0;
592 pfl->ident[0] = id0;
593 pfl->ident[1] = id1;
594 pfl->ident[2] = id2;
595 pfl->ident[3] = id3;
596 pfl->unlock_addr[0] = unlock_addr0;
597 pfl->unlock_addr[1] = unlock_addr1;
598 /* Hardcoded CFI table (mostly from SG29 Spansion flash) */
599 pfl->cfi_len = 0x52;
600 /* Standard "QRY" string */
601 pfl->cfi_table[0x10] = 'Q';
602 pfl->cfi_table[0x11] = 'R';
603 pfl->cfi_table[0x12] = 'Y';
604 /* Command set (AMD/Fujitsu) */
605 pfl->cfi_table[0x13] = 0x02;
606 pfl->cfi_table[0x14] = 0x00;
607 /* Primary extended table address */
608 pfl->cfi_table[0x15] = 0x31;
609 pfl->cfi_table[0x16] = 0x00;
610 /* Alternate command set (none) */
611 pfl->cfi_table[0x17] = 0x00;
612 pfl->cfi_table[0x18] = 0x00;
613 /* Alternate extended table (none) */
614 pfl->cfi_table[0x19] = 0x00;
615 pfl->cfi_table[0x1A] = 0x00;
616 /* Vcc min */
617 pfl->cfi_table[0x1B] = 0x27;
618 /* Vcc max */
619 pfl->cfi_table[0x1C] = 0x36;
620 /* Vpp min (no Vpp pin) */
621 pfl->cfi_table[0x1D] = 0x00;
622 /* Vpp max (no Vpp pin) */
623 pfl->cfi_table[0x1E] = 0x00;
624 /* Reserved */
625 pfl->cfi_table[0x1F] = 0x07;
626 /* Timeout for min size buffer write (NA) */
627 pfl->cfi_table[0x20] = 0x00;
628 /* Typical timeout for block erase (512 ms) */
629 pfl->cfi_table[0x21] = 0x09;
630 /* Typical timeout for full chip erase (4096 ms) */
631 pfl->cfi_table[0x22] = 0x0C;
632 /* Reserved */
633 pfl->cfi_table[0x23] = 0x01;
634 /* Max timeout for buffer write (NA) */
635 pfl->cfi_table[0x24] = 0x00;
636 /* Max timeout for block erase */
637 pfl->cfi_table[0x25] = 0x0A;
638 /* Max timeout for chip erase */
639 pfl->cfi_table[0x26] = 0x0D;
640 /* Device size */
641 pfl->cfi_table[0x27] = ctz32(chip_len);
642 /* Flash device interface (8 & 16 bits) */
643 pfl->cfi_table[0x28] = 0x02;
644 pfl->cfi_table[0x29] = 0x00;
645 /* Max number of bytes in multi-bytes write */
646 /* XXX: disable buffered write as it's not supported */
647 // pfl->cfi_table[0x2A] = 0x05;
648 pfl->cfi_table[0x2A] = 0x00;
649 pfl->cfi_table[0x2B] = 0x00;
650 /* Number of erase block regions (uniform) */
651 pfl->cfi_table[0x2C] = 0x01;
652 /* Erase block region 1 */
653 pfl->cfi_table[0x2D] = nb_blocs - 1;
654 pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
655 pfl->cfi_table[0x2F] = sector_len >> 8;
656 pfl->cfi_table[0x30] = sector_len >> 16;
658 /* Extended */
659 pfl->cfi_table[0x31] = 'P';
660 pfl->cfi_table[0x32] = 'R';
661 pfl->cfi_table[0x33] = 'I';
663 pfl->cfi_table[0x34] = '1';
664 pfl->cfi_table[0x35] = '0';
666 pfl->cfi_table[0x36] = 0x00;
667 pfl->cfi_table[0x37] = 0x00;
668 pfl->cfi_table[0x38] = 0x00;
669 pfl->cfi_table[0x39] = 0x00;
671 pfl->cfi_table[0x3a] = 0x00;
673 pfl->cfi_table[0x3b] = 0x00;
674 pfl->cfi_table[0x3c] = 0x00;
676 return pfl;