2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/i386/x86.h"
28 #include "hw/i386/pc.h"
29 #include "hw/char/serial.h"
30 #include "hw/char/parallel.h"
31 #include "hw/i386/apic.h"
32 #include "hw/i386/topology.h"
33 #include "hw/i386/fw_cfg.h"
34 #include "hw/i386/vmport.h"
35 #include "sysemu/cpus.h"
36 #include "hw/block/fdc.h"
38 #include "hw/pci/pci.h"
39 #include "hw/pci/pci_bus.h"
40 #include "hw/nvram/fw_cfg.h"
41 #include "hw/timer/hpet.h"
42 #include "hw/firmware/smbios.h"
43 #include "hw/loader.h"
45 #include "migration/vmstate.h"
46 #include "multiboot.h"
47 #include "hw/rtc/mc146818rtc.h"
48 #include "hw/intc/i8259.h"
49 #include "hw/dma/i8257.h"
50 #include "hw/timer/i8254.h"
51 #include "hw/input/i8042.h"
53 #include "hw/audio/pcspk.h"
54 #include "hw/pci/msi.h"
55 #include "hw/sysbus.h"
56 #include "sysemu/sysemu.h"
57 #include "sysemu/tcg.h"
58 #include "sysemu/numa.h"
59 #include "sysemu/kvm.h"
60 #include "sysemu/xen.h"
61 #include "sysemu/qtest.h"
62 #include "sysemu/reset.h"
63 #include "sysemu/runstate.h"
65 #include "hw/xen/xen.h"
66 #include "hw/xen/start_info.h"
67 #include "ui/qemu-spice.h"
68 #include "exec/memory.h"
69 #include "exec/address-spaces.h"
70 #include "sysemu/arch_init.h"
71 #include "qemu/bitmap.h"
72 #include "qemu/config-file.h"
73 #include "qemu/error-report.h"
74 #include "qemu/option.h"
75 #include "qemu/cutils.h"
76 #include "hw/acpi/acpi.h"
77 #include "hw/acpi/cpu_hotplug.h"
78 #include "hw/boards.h"
79 #include "acpi-build.h"
80 #include "hw/mem/pc-dimm.h"
81 #include "hw/mem/nvdimm.h"
82 #include "qapi/error.h"
83 #include "qapi/qapi-visit-common.h"
84 #include "qapi/visitor.h"
85 #include "hw/core/cpu.h"
87 #include "hw/i386/intel_iommu.h"
88 #include "hw/net/ne2000-isa.h"
89 #include "standard-headers/asm-x86/bootparam.h"
90 #include "hw/virtio/virtio-pmem-pci.h"
91 #include "hw/virtio/virtio-mem-pci.h"
92 #include "hw/mem/memory-device.h"
93 #include "sysemu/replay.h"
94 #include "qapi/qmp/qerror.h"
95 #include "config-devices.h"
96 #include "e820_memory_layout.h"
100 GlobalProperty pc_compat_5_0
[] = {};
101 const size_t pc_compat_5_0_len
= G_N_ELEMENTS(pc_compat_5_0
);
103 GlobalProperty pc_compat_4_2
[] = {
104 { "mch", "smbase-smram", "off" },
106 const size_t pc_compat_4_2_len
= G_N_ELEMENTS(pc_compat_4_2
);
108 GlobalProperty pc_compat_4_1
[] = {};
109 const size_t pc_compat_4_1_len
= G_N_ELEMENTS(pc_compat_4_1
);
111 GlobalProperty pc_compat_4_0
[] = {};
112 const size_t pc_compat_4_0_len
= G_N_ELEMENTS(pc_compat_4_0
);
114 GlobalProperty pc_compat_3_1
[] = {
115 { "intel-iommu", "dma-drain", "off" },
116 { "Opteron_G3" "-" TYPE_X86_CPU
, "rdtscp", "off" },
117 { "Opteron_G4" "-" TYPE_X86_CPU
, "rdtscp", "off" },
118 { "Opteron_G4" "-" TYPE_X86_CPU
, "npt", "off" },
119 { "Opteron_G4" "-" TYPE_X86_CPU
, "nrip-save", "off" },
120 { "Opteron_G5" "-" TYPE_X86_CPU
, "rdtscp", "off" },
121 { "Opteron_G5" "-" TYPE_X86_CPU
, "npt", "off" },
122 { "Opteron_G5" "-" TYPE_X86_CPU
, "nrip-save", "off" },
123 { "EPYC" "-" TYPE_X86_CPU
, "npt", "off" },
124 { "EPYC" "-" TYPE_X86_CPU
, "nrip-save", "off" },
125 { "EPYC-IBPB" "-" TYPE_X86_CPU
, "npt", "off" },
126 { "EPYC-IBPB" "-" TYPE_X86_CPU
, "nrip-save", "off" },
127 { "Skylake-Client" "-" TYPE_X86_CPU
, "mpx", "on" },
128 { "Skylake-Client-IBRS" "-" TYPE_X86_CPU
, "mpx", "on" },
129 { "Skylake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
130 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU
, "mpx", "on" },
131 { "Cascadelake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
132 { "Icelake-Client" "-" TYPE_X86_CPU
, "mpx", "on" },
133 { "Icelake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
134 { "Cascadelake-Server" "-" TYPE_X86_CPU
, "stepping", "5" },
135 { TYPE_X86_CPU
, "x-intel-pt-auto-level", "off" },
137 const size_t pc_compat_3_1_len
= G_N_ELEMENTS(pc_compat_3_1
);
139 GlobalProperty pc_compat_3_0
[] = {
140 { TYPE_X86_CPU
, "x-hv-synic-kvm-only", "on" },
141 { "Skylake-Server" "-" TYPE_X86_CPU
, "pku", "off" },
142 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU
, "pku", "off" },
144 const size_t pc_compat_3_0_len
= G_N_ELEMENTS(pc_compat_3_0
);
146 GlobalProperty pc_compat_2_12
[] = {
147 { TYPE_X86_CPU
, "legacy-cache", "on" },
148 { TYPE_X86_CPU
, "topoext", "off" },
149 { "EPYC-" TYPE_X86_CPU
, "xlevel", "0x8000000a" },
150 { "EPYC-IBPB-" TYPE_X86_CPU
, "xlevel", "0x8000000a" },
152 const size_t pc_compat_2_12_len
= G_N_ELEMENTS(pc_compat_2_12
);
154 GlobalProperty pc_compat_2_11
[] = {
155 { TYPE_X86_CPU
, "x-migrate-smi-count", "off" },
156 { "Skylake-Server" "-" TYPE_X86_CPU
, "clflushopt", "off" },
158 const size_t pc_compat_2_11_len
= G_N_ELEMENTS(pc_compat_2_11
);
160 GlobalProperty pc_compat_2_10
[] = {
161 { TYPE_X86_CPU
, "x-hv-max-vps", "0x40" },
162 { "i440FX-pcihost", "x-pci-hole64-fix", "off" },
163 { "q35-pcihost", "x-pci-hole64-fix", "off" },
165 const size_t pc_compat_2_10_len
= G_N_ELEMENTS(pc_compat_2_10
);
167 GlobalProperty pc_compat_2_9
[] = {
168 { "mch", "extended-tseg-mbytes", "0" },
170 const size_t pc_compat_2_9_len
= G_N_ELEMENTS(pc_compat_2_9
);
172 GlobalProperty pc_compat_2_8
[] = {
173 { TYPE_X86_CPU
, "tcg-cpuid", "off" },
174 { "kvmclock", "x-mach-use-reliable-get-clock", "off" },
175 { "ICH9-LPC", "x-smi-broadcast", "off" },
176 { TYPE_X86_CPU
, "vmware-cpuid-freq", "off" },
177 { "Haswell-" TYPE_X86_CPU
, "stepping", "1" },
179 const size_t pc_compat_2_8_len
= G_N_ELEMENTS(pc_compat_2_8
);
181 GlobalProperty pc_compat_2_7
[] = {
182 { TYPE_X86_CPU
, "l3-cache", "off" },
183 { TYPE_X86_CPU
, "full-cpuid-auto-level", "off" },
184 { "Opteron_G3" "-" TYPE_X86_CPU
, "family", "15" },
185 { "Opteron_G3" "-" TYPE_X86_CPU
, "model", "6" },
186 { "Opteron_G3" "-" TYPE_X86_CPU
, "stepping", "1" },
187 { "isa-pcspk", "migrate", "off" },
189 const size_t pc_compat_2_7_len
= G_N_ELEMENTS(pc_compat_2_7
);
191 GlobalProperty pc_compat_2_6
[] = {
192 { TYPE_X86_CPU
, "cpuid-0xb", "off" },
193 { "vmxnet3", "romfile", "" },
194 { TYPE_X86_CPU
, "fill-mtrr-mask", "off" },
195 { "apic-common", "legacy-instance-id", "on", }
197 const size_t pc_compat_2_6_len
= G_N_ELEMENTS(pc_compat_2_6
);
199 GlobalProperty pc_compat_2_5
[] = {};
200 const size_t pc_compat_2_5_len
= G_N_ELEMENTS(pc_compat_2_5
);
202 GlobalProperty pc_compat_2_4
[] = {
203 PC_CPU_MODEL_IDS("2.4.0")
204 { "Haswell-" TYPE_X86_CPU
, "abm", "off" },
205 { "Haswell-noTSX-" TYPE_X86_CPU
, "abm", "off" },
206 { "Broadwell-" TYPE_X86_CPU
, "abm", "off" },
207 { "Broadwell-noTSX-" TYPE_X86_CPU
, "abm", "off" },
208 { "host" "-" TYPE_X86_CPU
, "host-cache-info", "on" },
209 { TYPE_X86_CPU
, "check", "off" },
210 { "qemu64" "-" TYPE_X86_CPU
, "sse4a", "on" },
211 { "qemu64" "-" TYPE_X86_CPU
, "abm", "on" },
212 { "qemu64" "-" TYPE_X86_CPU
, "popcnt", "on" },
213 { "qemu32" "-" TYPE_X86_CPU
, "popcnt", "on" },
214 { "Opteron_G2" "-" TYPE_X86_CPU
, "rdtscp", "on" },
215 { "Opteron_G3" "-" TYPE_X86_CPU
, "rdtscp", "on" },
216 { "Opteron_G4" "-" TYPE_X86_CPU
, "rdtscp", "on" },
217 { "Opteron_G5" "-" TYPE_X86_CPU
, "rdtscp", "on", }
219 const size_t pc_compat_2_4_len
= G_N_ELEMENTS(pc_compat_2_4
);
221 GlobalProperty pc_compat_2_3
[] = {
222 PC_CPU_MODEL_IDS("2.3.0")
223 { TYPE_X86_CPU
, "arat", "off" },
224 { "qemu64" "-" TYPE_X86_CPU
, "min-level", "4" },
225 { "kvm64" "-" TYPE_X86_CPU
, "min-level", "5" },
226 { "pentium3" "-" TYPE_X86_CPU
, "min-level", "2" },
227 { "n270" "-" TYPE_X86_CPU
, "min-level", "5" },
228 { "Conroe" "-" TYPE_X86_CPU
, "min-level", "4" },
229 { "Penryn" "-" TYPE_X86_CPU
, "min-level", "4" },
230 { "Nehalem" "-" TYPE_X86_CPU
, "min-level", "4" },
231 { "n270" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
232 { "Penryn" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
233 { "Conroe" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
234 { "Nehalem" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
235 { "Westmere" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
236 { "SandyBridge" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
237 { "IvyBridge" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
238 { "Haswell" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
239 { "Haswell-noTSX" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
240 { "Broadwell" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
241 { "Broadwell-noTSX" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
242 { TYPE_X86_CPU
, "kvm-no-smi-migration", "on" },
244 const size_t pc_compat_2_3_len
= G_N_ELEMENTS(pc_compat_2_3
);
246 GlobalProperty pc_compat_2_2
[] = {
247 PC_CPU_MODEL_IDS("2.2.0")
248 { "kvm64" "-" TYPE_X86_CPU
, "vme", "off" },
249 { "kvm32" "-" TYPE_X86_CPU
, "vme", "off" },
250 { "Conroe" "-" TYPE_X86_CPU
, "vme", "off" },
251 { "Penryn" "-" TYPE_X86_CPU
, "vme", "off" },
252 { "Nehalem" "-" TYPE_X86_CPU
, "vme", "off" },
253 { "Westmere" "-" TYPE_X86_CPU
, "vme", "off" },
254 { "SandyBridge" "-" TYPE_X86_CPU
, "vme", "off" },
255 { "Haswell" "-" TYPE_X86_CPU
, "vme", "off" },
256 { "Broadwell" "-" TYPE_X86_CPU
, "vme", "off" },
257 { "Opteron_G1" "-" TYPE_X86_CPU
, "vme", "off" },
258 { "Opteron_G2" "-" TYPE_X86_CPU
, "vme", "off" },
259 { "Opteron_G3" "-" TYPE_X86_CPU
, "vme", "off" },
260 { "Opteron_G4" "-" TYPE_X86_CPU
, "vme", "off" },
261 { "Opteron_G5" "-" TYPE_X86_CPU
, "vme", "off" },
262 { "Haswell" "-" TYPE_X86_CPU
, "f16c", "off" },
263 { "Haswell" "-" TYPE_X86_CPU
, "rdrand", "off" },
264 { "Broadwell" "-" TYPE_X86_CPU
, "f16c", "off" },
265 { "Broadwell" "-" TYPE_X86_CPU
, "rdrand", "off" },
267 const size_t pc_compat_2_2_len
= G_N_ELEMENTS(pc_compat_2_2
);
269 GlobalProperty pc_compat_2_1
[] = {
270 PC_CPU_MODEL_IDS("2.1.0")
271 { "coreduo" "-" TYPE_X86_CPU
, "vmx", "on" },
272 { "core2duo" "-" TYPE_X86_CPU
, "vmx", "on" },
274 const size_t pc_compat_2_1_len
= G_N_ELEMENTS(pc_compat_2_1
);
276 GlobalProperty pc_compat_2_0
[] = {
277 PC_CPU_MODEL_IDS("2.0.0")
278 { "virtio-scsi-pci", "any_layout", "off" },
279 { "PIIX4_PM", "memory-hotplug-support", "off" },
280 { "apic", "version", "0x11" },
281 { "nec-usb-xhci", "superspeed-ports-first", "off" },
282 { "nec-usb-xhci", "force-pcie-endcap", "on" },
283 { "pci-serial", "prog_if", "0" },
284 { "pci-serial-2x", "prog_if", "0" },
285 { "pci-serial-4x", "prog_if", "0" },
286 { "virtio-net-pci", "guest_announce", "off" },
287 { "ICH9-LPC", "memory-hotplug-support", "off" },
288 { "xio3130-downstream", COMPAT_PROP_PCP
, "off" },
289 { "ioh3420", COMPAT_PROP_PCP
, "off" },
291 const size_t pc_compat_2_0_len
= G_N_ELEMENTS(pc_compat_2_0
);
293 GlobalProperty pc_compat_1_7
[] = {
294 PC_CPU_MODEL_IDS("1.7.0")
295 { TYPE_USB_DEVICE
, "msos-desc", "no" },
296 { "PIIX4_PM", "acpi-pci-hotplug-with-bridge-support", "off" },
297 { "hpet", HPET_INTCAP
, "4" },
299 const size_t pc_compat_1_7_len
= G_N_ELEMENTS(pc_compat_1_7
);
301 GlobalProperty pc_compat_1_6
[] = {
302 PC_CPU_MODEL_IDS("1.6.0")
303 { "e1000", "mitigation", "off" },
304 { "qemu64-" TYPE_X86_CPU
, "model", "2" },
305 { "qemu32-" TYPE_X86_CPU
, "model", "3" },
306 { "i440FX-pcihost", "short_root_bus", "1" },
307 { "q35-pcihost", "short_root_bus", "1" },
309 const size_t pc_compat_1_6_len
= G_N_ELEMENTS(pc_compat_1_6
);
311 GlobalProperty pc_compat_1_5
[] = {
312 PC_CPU_MODEL_IDS("1.5.0")
313 { "Conroe-" TYPE_X86_CPU
, "model", "2" },
314 { "Conroe-" TYPE_X86_CPU
, "min-level", "2" },
315 { "Penryn-" TYPE_X86_CPU
, "model", "2" },
316 { "Penryn-" TYPE_X86_CPU
, "min-level", "2" },
317 { "Nehalem-" TYPE_X86_CPU
, "model", "2" },
318 { "Nehalem-" TYPE_X86_CPU
, "min-level", "2" },
319 { "virtio-net-pci", "any_layout", "off" },
320 { TYPE_X86_CPU
, "pmu", "on" },
321 { "i440FX-pcihost", "short_root_bus", "0" },
322 { "q35-pcihost", "short_root_bus", "0" },
324 const size_t pc_compat_1_5_len
= G_N_ELEMENTS(pc_compat_1_5
);
326 GlobalProperty pc_compat_1_4
[] = {
327 PC_CPU_MODEL_IDS("1.4.0")
328 { "scsi-hd", "discard_granularity", "0" },
329 { "scsi-cd", "discard_granularity", "0" },
330 { "scsi-disk", "discard_granularity", "0" },
331 { "ide-hd", "discard_granularity", "0" },
332 { "ide-cd", "discard_granularity", "0" },
333 { "ide-drive", "discard_granularity", "0" },
334 { "virtio-blk-pci", "discard_granularity", "0" },
335 /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */
336 { "virtio-serial-pci", "vectors", "0xFFFFFFFF" },
337 { "virtio-net-pci", "ctrl_guest_offloads", "off" },
338 { "e1000", "romfile", "pxe-e1000.rom" },
339 { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" },
340 { "pcnet", "romfile", "pxe-pcnet.rom" },
341 { "rtl8139", "romfile", "pxe-rtl8139.rom" },
342 { "virtio-net-pci", "romfile", "pxe-virtio.rom" },
343 { "486-" TYPE_X86_CPU
, "model", "0" },
344 { "n270" "-" TYPE_X86_CPU
, "movbe", "off" },
345 { "Westmere" "-" TYPE_X86_CPU
, "pclmulqdq", "off" },
347 const size_t pc_compat_1_4_len
= G_N_ELEMENTS(pc_compat_1_4
);
349 GSIState
*pc_gsi_create(qemu_irq
**irqs
, bool pci_enabled
)
353 s
= g_new0(GSIState
, 1);
354 if (kvm_ioapic_in_kernel()) {
355 kvm_pc_setup_irq_routing(pci_enabled
);
357 *irqs
= qemu_allocate_irqs(gsi_handler
, s
, GSI_NUM_PINS
);
362 static void ioport80_write(void *opaque
, hwaddr addr
, uint64_t data
,
367 static uint64_t ioport80_read(void *opaque
, hwaddr addr
, unsigned size
)
369 return 0xffffffffffffffffULL
;
372 /* MSDOS compatibility mode FPU exception support */
373 static void ioportF0_write(void *opaque
, hwaddr addr
, uint64_t data
,
381 static uint64_t ioportF0_read(void *opaque
, hwaddr addr
, unsigned size
)
383 return 0xffffffffffffffffULL
;
386 /* PC cmos mappings */
388 #define REG_EQUIPMENT_BYTE 0x14
390 static void cmos_init_hd(ISADevice
*s
, int type_ofs
, int info_ofs
,
391 int16_t cylinders
, int8_t heads
, int8_t sectors
)
393 rtc_set_memory(s
, type_ofs
, 47);
394 rtc_set_memory(s
, info_ofs
, cylinders
);
395 rtc_set_memory(s
, info_ofs
+ 1, cylinders
>> 8);
396 rtc_set_memory(s
, info_ofs
+ 2, heads
);
397 rtc_set_memory(s
, info_ofs
+ 3, 0xff);
398 rtc_set_memory(s
, info_ofs
+ 4, 0xff);
399 rtc_set_memory(s
, info_ofs
+ 5, 0xc0 | ((heads
> 8) << 3));
400 rtc_set_memory(s
, info_ofs
+ 6, cylinders
);
401 rtc_set_memory(s
, info_ofs
+ 7, cylinders
>> 8);
402 rtc_set_memory(s
, info_ofs
+ 8, sectors
);
405 /* convert boot_device letter to something recognizable by the bios */
406 static int boot_device2nibble(char boot_device
)
408 switch(boot_device
) {
411 return 0x01; /* floppy boot */
413 return 0x02; /* hard drive boot */
415 return 0x03; /* CD-ROM boot */
417 return 0x04; /* Network boot */
422 static void set_boot_dev(ISADevice
*s
, const char *boot_device
, Error
**errp
)
424 #define PC_MAX_BOOT_DEVICES 3
425 int nbds
, bds
[3] = { 0, };
428 nbds
= strlen(boot_device
);
429 if (nbds
> PC_MAX_BOOT_DEVICES
) {
430 error_setg(errp
, "Too many boot devices for PC");
433 for (i
= 0; i
< nbds
; i
++) {
434 bds
[i
] = boot_device2nibble(boot_device
[i
]);
436 error_setg(errp
, "Invalid boot device for PC: '%c'",
441 rtc_set_memory(s
, 0x3d, (bds
[1] << 4) | bds
[0]);
442 rtc_set_memory(s
, 0x38, (bds
[2] << 4) | (fd_bootchk
? 0x0 : 0x1));
445 static void pc_boot_set(void *opaque
, const char *boot_device
, Error
**errp
)
447 set_boot_dev(opaque
, boot_device
, errp
);
450 static void pc_cmos_init_floppy(ISADevice
*rtc_state
, ISADevice
*floppy
)
453 FloppyDriveType fd_type
[2] = { FLOPPY_DRIVE_TYPE_NONE
,
454 FLOPPY_DRIVE_TYPE_NONE
};
458 for (i
= 0; i
< 2; i
++) {
459 fd_type
[i
] = isa_fdc_get_drive_type(floppy
, i
);
462 val
= (cmos_get_fd_drive_type(fd_type
[0]) << 4) |
463 cmos_get_fd_drive_type(fd_type
[1]);
464 rtc_set_memory(rtc_state
, 0x10, val
);
466 val
= rtc_get_memory(rtc_state
, REG_EQUIPMENT_BYTE
);
468 if (fd_type
[0] != FLOPPY_DRIVE_TYPE_NONE
) {
471 if (fd_type
[1] != FLOPPY_DRIVE_TYPE_NONE
) {
478 val
|= 0x01; /* 1 drive, ready for boot */
481 val
|= 0x41; /* 2 drives, ready for boot */
484 rtc_set_memory(rtc_state
, REG_EQUIPMENT_BYTE
, val
);
487 typedef struct pc_cmos_init_late_arg
{
488 ISADevice
*rtc_state
;
490 } pc_cmos_init_late_arg
;
492 typedef struct check_fdc_state
{
497 static int check_fdc(Object
*obj
, void *opaque
)
499 CheckFdcState
*state
= opaque
;
502 Error
*local_err
= NULL
;
504 fdc
= object_dynamic_cast(obj
, TYPE_ISA_FDC
);
509 iobase
= object_property_get_uint(obj
, "iobase", &local_err
);
510 if (local_err
|| iobase
!= 0x3f0) {
511 error_free(local_err
);
516 state
->multiple
= true;
518 state
->floppy
= ISA_DEVICE(obj
);
523 static const char * const fdc_container_path
[] = {
524 "/unattached", "/peripheral", "/peripheral-anon"
528 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers
531 ISADevice
*pc_find_fdc0(void)
535 CheckFdcState state
= { 0 };
537 for (i
= 0; i
< ARRAY_SIZE(fdc_container_path
); i
++) {
538 container
= container_get(qdev_get_machine(), fdc_container_path
[i
]);
539 object_child_foreach(container
, check_fdc
, &state
);
542 if (state
.multiple
) {
543 warn_report("multiple floppy disk controllers with "
544 "iobase=0x3f0 have been found");
545 error_printf("the one being picked for CMOS setup might not reflect "
552 static void pc_cmos_init_late(void *opaque
)
554 pc_cmos_init_late_arg
*arg
= opaque
;
555 ISADevice
*s
= arg
->rtc_state
;
557 int8_t heads
, sectors
;
562 if (arg
->idebus
[0] && ide_get_geometry(arg
->idebus
[0], 0,
563 &cylinders
, &heads
, §ors
) >= 0) {
564 cmos_init_hd(s
, 0x19, 0x1b, cylinders
, heads
, sectors
);
567 if (arg
->idebus
[0] && ide_get_geometry(arg
->idebus
[0], 1,
568 &cylinders
, &heads
, §ors
) >= 0) {
569 cmos_init_hd(s
, 0x1a, 0x24, cylinders
, heads
, sectors
);
572 rtc_set_memory(s
, 0x12, val
);
575 for (i
= 0; i
< 4; i
++) {
576 /* NOTE: ide_get_geometry() returns the physical
577 geometry. It is always such that: 1 <= sects <= 63, 1
578 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
579 geometry can be different if a translation is done. */
580 if (arg
->idebus
[i
/ 2] &&
581 ide_get_geometry(arg
->idebus
[i
/ 2], i
% 2,
582 &cylinders
, &heads
, §ors
) >= 0) {
583 trans
= ide_get_bios_chs_trans(arg
->idebus
[i
/ 2], i
% 2) - 1;
584 assert((trans
& ~3) == 0);
585 val
|= trans
<< (i
* 2);
588 rtc_set_memory(s
, 0x39, val
);
590 pc_cmos_init_floppy(s
, pc_find_fdc0());
592 qemu_unregister_reset(pc_cmos_init_late
, opaque
);
595 void pc_cmos_init(PCMachineState
*pcms
,
596 BusState
*idebus0
, BusState
*idebus1
,
600 static pc_cmos_init_late_arg arg
;
601 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
603 /* various important CMOS locations needed by PC/Bochs bios */
606 /* base memory (first MiB) */
607 val
= MIN(x86ms
->below_4g_mem_size
/ KiB
, 640);
608 rtc_set_memory(s
, 0x15, val
);
609 rtc_set_memory(s
, 0x16, val
>> 8);
610 /* extended memory (next 64MiB) */
611 if (x86ms
->below_4g_mem_size
> 1 * MiB
) {
612 val
= (x86ms
->below_4g_mem_size
- 1 * MiB
) / KiB
;
618 rtc_set_memory(s
, 0x17, val
);
619 rtc_set_memory(s
, 0x18, val
>> 8);
620 rtc_set_memory(s
, 0x30, val
);
621 rtc_set_memory(s
, 0x31, val
>> 8);
622 /* memory between 16MiB and 4GiB */
623 if (x86ms
->below_4g_mem_size
> 16 * MiB
) {
624 val
= (x86ms
->below_4g_mem_size
- 16 * MiB
) / (64 * KiB
);
630 rtc_set_memory(s
, 0x34, val
);
631 rtc_set_memory(s
, 0x35, val
>> 8);
632 /* memory above 4GiB */
633 val
= x86ms
->above_4g_mem_size
/ 65536;
634 rtc_set_memory(s
, 0x5b, val
);
635 rtc_set_memory(s
, 0x5c, val
>> 8);
636 rtc_set_memory(s
, 0x5d, val
>> 16);
638 object_property_add_link(OBJECT(pcms
), "rtc_state",
640 (Object
**)&x86ms
->rtc
,
641 object_property_allow_set_link
,
642 OBJ_PROP_LINK_STRONG
);
643 object_property_set_link(OBJECT(pcms
), "rtc_state", OBJECT(s
),
646 set_boot_dev(s
, MACHINE(pcms
)->boot_order
, &error_fatal
);
649 val
|= 0x02; /* FPU is there */
650 val
|= 0x04; /* PS/2 mouse installed */
651 rtc_set_memory(s
, REG_EQUIPMENT_BYTE
, val
);
653 /* hard drives and FDC */
655 arg
.idebus
[0] = idebus0
;
656 arg
.idebus
[1] = idebus1
;
657 qemu_register_reset(pc_cmos_init_late
, &arg
);
660 static void handle_a20_line_change(void *opaque
, int irq
, int level
)
662 X86CPU
*cpu
= opaque
;
664 /* XXX: send to all CPUs ? */
665 /* XXX: add logic to handle multiple A20 line sources */
666 x86_cpu_set_a20(cpu
, level
);
669 #define NE2000_NB_MAX 6
671 static const int ne2000_io
[NE2000_NB_MAX
] = { 0x300, 0x320, 0x340, 0x360,
673 static const int ne2000_irq
[NE2000_NB_MAX
] = { 9, 10, 11, 3, 4, 5 };
675 void pc_init_ne2k_isa(ISABus
*bus
, NICInfo
*nd
)
677 static int nb_ne2k
= 0;
679 if (nb_ne2k
== NE2000_NB_MAX
)
681 isa_ne2000_init(bus
, ne2000_io
[nb_ne2k
],
682 ne2000_irq
[nb_ne2k
], nd
);
686 void pc_acpi_smi_interrupt(void *opaque
, int irq
, int level
)
688 X86CPU
*cpu
= opaque
;
691 cpu_interrupt(CPU(cpu
), CPU_INTERRUPT_SMI
);
696 * This function is very similar to smp_parse()
697 * in hw/core/machine.c but includes CPU die support.
699 void pc_smp_parse(MachineState
*ms
, QemuOpts
*opts
)
701 X86MachineState
*x86ms
= X86_MACHINE(ms
);
704 unsigned cpus
= qemu_opt_get_number(opts
, "cpus", 0);
705 unsigned sockets
= qemu_opt_get_number(opts
, "sockets", 0);
706 unsigned dies
= qemu_opt_get_number(opts
, "dies", 1);
707 unsigned cores
= qemu_opt_get_number(opts
, "cores", 0);
708 unsigned threads
= qemu_opt_get_number(opts
, "threads", 0);
710 /* compute missing values, prefer sockets over cores over threads */
711 if (cpus
== 0 || sockets
== 0) {
712 cores
= cores
> 0 ? cores
: 1;
713 threads
= threads
> 0 ? threads
: 1;
715 sockets
= sockets
> 0 ? sockets
: 1;
716 cpus
= cores
* threads
* dies
* sockets
;
719 qemu_opt_get_number(opts
, "maxcpus", cpus
);
720 sockets
= ms
->smp
.max_cpus
/ (cores
* threads
* dies
);
722 } else if (cores
== 0) {
723 threads
= threads
> 0 ? threads
: 1;
724 cores
= cpus
/ (sockets
* dies
* threads
);
725 cores
= cores
> 0 ? cores
: 1;
726 } else if (threads
== 0) {
727 threads
= cpus
/ (cores
* dies
* sockets
);
728 threads
= threads
> 0 ? threads
: 1;
729 } else if (sockets
* dies
* cores
* threads
< cpus
) {
730 error_report("cpu topology: "
731 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) < "
733 sockets
, dies
, cores
, threads
, cpus
);
738 qemu_opt_get_number(opts
, "maxcpus", cpus
);
740 if (ms
->smp
.max_cpus
< cpus
) {
741 error_report("maxcpus must be equal to or greater than smp");
745 if (sockets
* dies
* cores
* threads
> ms
->smp
.max_cpus
) {
746 error_report("cpu topology: "
747 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) > "
749 sockets
, dies
, cores
, threads
,
754 if (sockets
* dies
* cores
* threads
!= ms
->smp
.max_cpus
) {
755 warn_report("Invalid CPU topology deprecated: "
756 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) "
758 sockets
, dies
, cores
, threads
,
763 ms
->smp
.cores
= cores
;
764 ms
->smp
.threads
= threads
;
765 ms
->smp
.sockets
= sockets
;
766 x86ms
->smp_dies
= dies
;
769 if (ms
->smp
.cpus
> 1) {
770 Error
*blocker
= NULL
;
771 error_setg(&blocker
, QERR_REPLAY_NOT_SUPPORTED
, "smp");
772 replay_add_blocker(blocker
);
776 void pc_hot_add_cpu(MachineState
*ms
, const int64_t id
, Error
**errp
)
778 X86MachineState
*x86ms
= X86_MACHINE(ms
);
779 int64_t apic_id
= x86_cpu_apic_id_from_index(x86ms
, id
);
780 Error
*local_err
= NULL
;
783 error_setg(errp
, "Invalid CPU id: %" PRIi64
, id
);
787 if (apic_id
>= ACPI_CPU_HOTPLUG_ID_LIMIT
) {
788 error_setg(errp
, "Unable to add CPU: %" PRIi64
789 ", resulting APIC ID (%" PRIi64
") is too large",
795 x86_cpu_new(X86_MACHINE(ms
), apic_id
, &local_err
);
797 error_propagate(errp
, local_err
);
802 static void rtc_set_cpus_count(ISADevice
*rtc
, uint16_t cpus_count
)
804 if (cpus_count
> 0xff) {
805 /* If the number of CPUs can't be represented in 8 bits, the
806 * BIOS must use "FW_CFG_NB_CPUS". Set RTC field to 0 just
807 * to make old BIOSes fail more predictably.
809 rtc_set_memory(rtc
, 0x5f, 0);
811 rtc_set_memory(rtc
, 0x5f, cpus_count
- 1);
816 void pc_machine_done(Notifier
*notifier
, void *data
)
818 PCMachineState
*pcms
= container_of(notifier
,
819 PCMachineState
, machine_done
);
820 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
821 PCIBus
*bus
= pcms
->bus
;
823 /* set the number of CPUs */
824 rtc_set_cpus_count(x86ms
->rtc
, x86ms
->boot_cpus
);
829 QLIST_FOREACH(bus
, &bus
->child
, sibling
) {
830 /* look for expander root buses */
831 if (pci_bus_is_root(bus
)) {
835 if (extra_hosts
&& x86ms
->fw_cfg
) {
836 uint64_t *val
= g_malloc(sizeof(*val
));
837 *val
= cpu_to_le64(extra_hosts
);
838 fw_cfg_add_file(x86ms
->fw_cfg
,
839 "etc/extra-pci-roots", val
, sizeof(*val
));
845 fw_cfg_build_smbios(MACHINE(pcms
), x86ms
->fw_cfg
);
846 fw_cfg_build_feature_control(MACHINE(pcms
), x86ms
->fw_cfg
);
847 /* update FW_CFG_NB_CPUS to account for -device added CPUs */
848 fw_cfg_modify_i16(x86ms
->fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
851 if (x86ms
->apic_id_limit
> 255 && !xen_enabled()) {
852 IntelIOMMUState
*iommu
= INTEL_IOMMU_DEVICE(x86_iommu_get_default());
854 if (!iommu
|| !x86_iommu_ir_supported(X86_IOMMU_DEVICE(iommu
)) ||
855 iommu
->intr_eim
!= ON_OFF_AUTO_ON
) {
856 error_report("current -smp configuration requires "
857 "Extended Interrupt Mode enabled. "
858 "You can add an IOMMU using: "
859 "-device intel-iommu,intremap=on,eim=on");
865 void pc_guest_info_init(PCMachineState
*pcms
)
868 MachineState
*ms
= MACHINE(pcms
);
869 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
871 x86ms
->apic_xrupt_override
= kvm_allows_irq0_override();
872 pcms
->numa_nodes
= ms
->numa_state
->num_nodes
;
873 pcms
->node_mem
= g_malloc0(pcms
->numa_nodes
*
874 sizeof *pcms
->node_mem
);
875 for (i
= 0; i
< ms
->numa_state
->num_nodes
; i
++) {
876 pcms
->node_mem
[i
] = ms
->numa_state
->nodes
[i
].node_mem
;
879 pcms
->machine_done
.notify
= pc_machine_done
;
880 qemu_add_machine_init_done_notifier(&pcms
->machine_done
);
883 /* setup pci memory address space mapping into system address space */
884 void pc_pci_as_mapping_init(Object
*owner
, MemoryRegion
*system_memory
,
885 MemoryRegion
*pci_address_space
)
887 /* Set to lower priority than RAM */
888 memory_region_add_subregion_overlap(system_memory
, 0x0,
889 pci_address_space
, -1);
892 void xen_load_linux(PCMachineState
*pcms
)
896 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
897 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
899 assert(MACHINE(pcms
)->kernel_filename
!= NULL
);
901 fw_cfg
= fw_cfg_init_io(FW_CFG_IO_BASE
);
902 fw_cfg_add_i16(fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
905 x86_load_linux(x86ms
, fw_cfg
, pcmc
->acpi_data_size
,
906 pcmc
->pvh_enabled
, pcmc
->linuxboot_dma_enabled
);
907 for (i
= 0; i
< nb_option_roms
; i
++) {
908 assert(!strcmp(option_rom
[i
].name
, "linuxboot.bin") ||
909 !strcmp(option_rom
[i
].name
, "linuxboot_dma.bin") ||
910 !strcmp(option_rom
[i
].name
, "pvh.bin") ||
911 !strcmp(option_rom
[i
].name
, "multiboot.bin"));
912 rom_add_option(option_rom
[i
].name
, option_rom
[i
].bootindex
);
914 x86ms
->fw_cfg
= fw_cfg
;
917 void pc_memory_init(PCMachineState
*pcms
,
918 MemoryRegion
*system_memory
,
919 MemoryRegion
*rom_memory
,
920 MemoryRegion
**ram_memory
)
923 MemoryRegion
*option_rom_mr
;
924 MemoryRegion
*ram_below_4g
, *ram_above_4g
;
926 MachineState
*machine
= MACHINE(pcms
);
927 MachineClass
*mc
= MACHINE_GET_CLASS(machine
);
928 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
929 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
931 assert(machine
->ram_size
== x86ms
->below_4g_mem_size
+
932 x86ms
->above_4g_mem_size
);
934 linux_boot
= (machine
->kernel_filename
!= NULL
);
937 * Split single memory region and use aliases to address portions of it,
938 * done for backwards compatibility with older qemus.
940 *ram_memory
= machine
->ram
;
941 ram_below_4g
= g_malloc(sizeof(*ram_below_4g
));
942 memory_region_init_alias(ram_below_4g
, NULL
, "ram-below-4g", machine
->ram
,
943 0, x86ms
->below_4g_mem_size
);
944 memory_region_add_subregion(system_memory
, 0, ram_below_4g
);
945 e820_add_entry(0, x86ms
->below_4g_mem_size
, E820_RAM
);
946 if (x86ms
->above_4g_mem_size
> 0) {
947 ram_above_4g
= g_malloc(sizeof(*ram_above_4g
));
948 memory_region_init_alias(ram_above_4g
, NULL
, "ram-above-4g",
950 x86ms
->below_4g_mem_size
,
951 x86ms
->above_4g_mem_size
);
952 memory_region_add_subregion(system_memory
, 0x100000000ULL
,
954 e820_add_entry(0x100000000ULL
, x86ms
->above_4g_mem_size
, E820_RAM
);
957 if (!pcmc
->has_reserved_memory
&&
958 (machine
->ram_slots
||
959 (machine
->maxram_size
> machine
->ram_size
))) {
961 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s",
966 /* always allocate the device memory information */
967 machine
->device_memory
= g_malloc0(sizeof(*machine
->device_memory
));
969 /* initialize device memory address space */
970 if (pcmc
->has_reserved_memory
&&
971 (machine
->ram_size
< machine
->maxram_size
)) {
972 ram_addr_t device_mem_size
= machine
->maxram_size
- machine
->ram_size
;
974 if (machine
->ram_slots
> ACPI_MAX_RAM_SLOTS
) {
975 error_report("unsupported amount of memory slots: %"PRIu64
,
980 if (QEMU_ALIGN_UP(machine
->maxram_size
,
981 TARGET_PAGE_SIZE
) != machine
->maxram_size
) {
982 error_report("maximum memory size must by aligned to multiple of "
983 "%d bytes", TARGET_PAGE_SIZE
);
987 machine
->device_memory
->base
=
988 ROUND_UP(0x100000000ULL
+ x86ms
->above_4g_mem_size
, 1 * GiB
);
990 if (pcmc
->enforce_aligned_dimm
) {
991 /* size device region assuming 1G page max alignment per slot */
992 device_mem_size
+= (1 * GiB
) * machine
->ram_slots
;
995 if ((machine
->device_memory
->base
+ device_mem_size
) <
997 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT
,
998 machine
->maxram_size
);
1002 memory_region_init(&machine
->device_memory
->mr
, OBJECT(pcms
),
1003 "device-memory", device_mem_size
);
1004 memory_region_add_subregion(system_memory
, machine
->device_memory
->base
,
1005 &machine
->device_memory
->mr
);
1008 /* Initialize PC system firmware */
1009 pc_system_firmware_init(pcms
, rom_memory
);
1011 option_rom_mr
= g_malloc(sizeof(*option_rom_mr
));
1012 memory_region_init_ram(option_rom_mr
, NULL
, "pc.rom", PC_ROM_SIZE
,
1014 if (pcmc
->pci_enabled
) {
1015 memory_region_set_readonly(option_rom_mr
, true);
1017 memory_region_add_subregion_overlap(rom_memory
,
1022 fw_cfg
= fw_cfg_arch_create(machine
,
1023 x86ms
->boot_cpus
, x86ms
->apic_id_limit
);
1027 if (pcmc
->has_reserved_memory
&& machine
->device_memory
->base
) {
1028 uint64_t *val
= g_malloc(sizeof(*val
));
1029 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1030 uint64_t res_mem_end
= machine
->device_memory
->base
;
1032 if (!pcmc
->broken_reserved_end
) {
1033 res_mem_end
+= memory_region_size(&machine
->device_memory
->mr
);
1035 *val
= cpu_to_le64(ROUND_UP(res_mem_end
, 1 * GiB
));
1036 fw_cfg_add_file(fw_cfg
, "etc/reserved-memory-end", val
, sizeof(*val
));
1040 x86_load_linux(x86ms
, fw_cfg
, pcmc
->acpi_data_size
,
1041 pcmc
->pvh_enabled
, pcmc
->linuxboot_dma_enabled
);
1044 for (i
= 0; i
< nb_option_roms
; i
++) {
1045 rom_add_option(option_rom
[i
].name
, option_rom
[i
].bootindex
);
1047 x86ms
->fw_cfg
= fw_cfg
;
1049 /* Init default IOAPIC address space */
1050 x86ms
->ioapic_as
= &address_space_memory
;
1052 /* Init ACPI memory hotplug IO base address */
1053 pcms
->memhp_io_base
= ACPI_MEMORY_HOTPLUG_BASE
;
1057 * The 64bit pci hole starts after "above 4G RAM" and
1058 * potentially the space reserved for memory hotplug.
1060 uint64_t pc_pci_hole64_start(void)
1062 PCMachineState
*pcms
= PC_MACHINE(qdev_get_machine());
1063 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1064 MachineState
*ms
= MACHINE(pcms
);
1065 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1066 uint64_t hole64_start
= 0;
1068 if (pcmc
->has_reserved_memory
&& ms
->device_memory
->base
) {
1069 hole64_start
= ms
->device_memory
->base
;
1070 if (!pcmc
->broken_reserved_end
) {
1071 hole64_start
+= memory_region_size(&ms
->device_memory
->mr
);
1074 hole64_start
= 0x100000000ULL
+ x86ms
->above_4g_mem_size
;
1077 return ROUND_UP(hole64_start
, 1 * GiB
);
1080 DeviceState
*pc_vga_init(ISABus
*isa_bus
, PCIBus
*pci_bus
)
1082 DeviceState
*dev
= NULL
;
1084 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA
);
1086 PCIDevice
*pcidev
= pci_vga_init(pci_bus
);
1087 dev
= pcidev
? &pcidev
->qdev
: NULL
;
1088 } else if (isa_bus
) {
1089 ISADevice
*isadev
= isa_vga_init(isa_bus
);
1090 dev
= isadev
? DEVICE(isadev
) : NULL
;
1092 rom_reset_order_override();
1096 static const MemoryRegionOps ioport80_io_ops
= {
1097 .write
= ioport80_write
,
1098 .read
= ioport80_read
,
1099 .endianness
= DEVICE_NATIVE_ENDIAN
,
1101 .min_access_size
= 1,
1102 .max_access_size
= 1,
1106 static const MemoryRegionOps ioportF0_io_ops
= {
1107 .write
= ioportF0_write
,
1108 .read
= ioportF0_read
,
1109 .endianness
= DEVICE_NATIVE_ENDIAN
,
1111 .min_access_size
= 1,
1112 .max_access_size
= 1,
1116 static void pc_superio_init(ISABus
*isa_bus
, bool create_fdctrl
, bool no_vmport
)
1119 DriveInfo
*fd
[MAX_FD
];
1121 ISADevice
*fdc
, *i8042
, *port92
, *vmmouse
;
1123 serial_hds_isa_init(isa_bus
, 0, MAX_ISA_SERIAL_PORTS
);
1124 parallel_hds_isa_init(isa_bus
, MAX_PARALLEL_PORTS
);
1126 for (i
= 0; i
< MAX_FD
; i
++) {
1127 fd
[i
] = drive_get(IF_FLOPPY
, 0, i
);
1128 create_fdctrl
|= !!fd
[i
];
1130 if (create_fdctrl
) {
1131 fdc
= isa_new(TYPE_ISA_FDC
);
1133 isa_realize_and_unref(fdc
, isa_bus
, &error_fatal
);
1134 isa_fdc_init_drives(fdc
, fd
);
1138 i8042
= isa_create_simple(isa_bus
, "i8042");
1140 isa_create_simple(isa_bus
, TYPE_VMPORT
);
1141 vmmouse
= isa_try_new("vmmouse");
1146 object_property_set_link(OBJECT(vmmouse
), "i8042", OBJECT(i8042
),
1148 isa_realize_and_unref(vmmouse
, isa_bus
, &error_fatal
);
1150 port92
= isa_create_simple(isa_bus
, TYPE_PORT92
);
1152 a20_line
= qemu_allocate_irqs(handle_a20_line_change
, first_cpu
, 2);
1153 i8042_setup_a20_line(i8042
, a20_line
[0]);
1154 qdev_connect_gpio_out_named(DEVICE(port92
),
1155 PORT92_A20_LINE
, 0, a20_line
[1]);
1159 void pc_basic_device_init(struct PCMachineState
*pcms
,
1160 ISABus
*isa_bus
, qemu_irq
*gsi
,
1161 ISADevice
**rtc_state
,
1166 DeviceState
*hpet
= NULL
;
1167 int pit_isa_irq
= 0;
1168 qemu_irq pit_alt_irq
= NULL
;
1169 qemu_irq rtc_irq
= NULL
;
1170 ISADevice
*pit
= NULL
;
1171 MemoryRegion
*ioport80_io
= g_new(MemoryRegion
, 1);
1172 MemoryRegion
*ioportF0_io
= g_new(MemoryRegion
, 1);
1174 memory_region_init_io(ioport80_io
, NULL
, &ioport80_io_ops
, NULL
, "ioport80", 1);
1175 memory_region_add_subregion(isa_bus
->address_space_io
, 0x80, ioport80_io
);
1177 memory_region_init_io(ioportF0_io
, NULL
, &ioportF0_io_ops
, NULL
, "ioportF0", 1);
1178 memory_region_add_subregion(isa_bus
->address_space_io
, 0xf0, ioportF0_io
);
1181 * Check if an HPET shall be created.
1183 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
1184 * when the HPET wants to take over. Thus we have to disable the latter.
1186 if (!no_hpet
&& (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) {
1187 hpet
= qdev_try_new(TYPE_HPET
);
1189 /* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7
1190 * and earlier, use IRQ2 for compat. Otherwise, use IRQ16~23,
1193 uint8_t compat
= object_property_get_uint(OBJECT(hpet
),
1196 qdev_prop_set_uint32(hpet
, HPET_INTCAP
, hpet_irqs
);
1198 sysbus_realize_and_unref(SYS_BUS_DEVICE(hpet
), &error_fatal
);
1199 sysbus_mmio_map(SYS_BUS_DEVICE(hpet
), 0, HPET_BASE
);
1201 for (i
= 0; i
< GSI_NUM_PINS
; i
++) {
1202 sysbus_connect_irq(SYS_BUS_DEVICE(hpet
), i
, gsi
[i
]);
1205 pit_alt_irq
= qdev_get_gpio_in(hpet
, HPET_LEGACY_PIT_INT
);
1206 rtc_irq
= qdev_get_gpio_in(hpet
, HPET_LEGACY_RTC_INT
);
1209 *rtc_state
= mc146818_rtc_init(isa_bus
, 2000, rtc_irq
);
1211 qemu_register_boot_set(pc_boot_set
, *rtc_state
);
1213 if (!xen_enabled() && pcms
->pit_enabled
) {
1214 if (kvm_pit_in_kernel()) {
1215 pit
= kvm_pit_init(isa_bus
, 0x40);
1217 pit
= i8254_pit_init(isa_bus
, 0x40, pit_isa_irq
, pit_alt_irq
);
1220 /* connect PIT to output control line of the HPET */
1221 qdev_connect_gpio_out(hpet
, 0, qdev_get_gpio_in(DEVICE(pit
), 0));
1223 pcspk_init(pcms
->pcspk
, isa_bus
, pit
);
1226 i8257_dma_init(isa_bus
, 0);
1229 pc_superio_init(isa_bus
, create_fdctrl
, pcms
->vmport
!= ON_OFF_AUTO_ON
);
1232 void pc_nic_init(PCMachineClass
*pcmc
, ISABus
*isa_bus
, PCIBus
*pci_bus
)
1236 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC
);
1237 for (i
= 0; i
< nb_nics
; i
++) {
1238 NICInfo
*nd
= &nd_table
[i
];
1239 const char *model
= nd
->model
? nd
->model
: pcmc
->default_nic_model
;
1241 if (g_str_equal(model
, "ne2k_isa")) {
1242 pc_init_ne2k_isa(isa_bus
, nd
);
1244 pci_nic_init_nofail(nd
, pci_bus
, model
, NULL
);
1247 rom_reset_order_override();
1250 void pc_i8259_create(ISABus
*isa_bus
, qemu_irq
*i8259_irqs
)
1254 if (kvm_pic_in_kernel()) {
1255 i8259
= kvm_i8259_init(isa_bus
);
1256 } else if (xen_enabled()) {
1257 i8259
= xen_interrupt_controller_init();
1259 i8259
= i8259_init(isa_bus
, x86_allocate_cpu_irq());
1262 for (size_t i
= 0; i
< ISA_NUM_IRQS
; i
++) {
1263 i8259_irqs
[i
] = i8259
[i
];
1269 static void pc_memory_pre_plug(HotplugHandler
*hotplug_dev
, DeviceState
*dev
,
1272 const PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1273 const PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1274 const MachineState
*ms
= MACHINE(hotplug_dev
);
1275 const bool is_nvdimm
= object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
);
1276 const uint64_t legacy_align
= TARGET_PAGE_SIZE
;
1277 Error
*local_err
= NULL
;
1280 * When -no-acpi is used with Q35 machine type, no ACPI is built,
1281 * but pcms->acpi_dev is still created. Check !acpi_enabled in
1282 * addition to cover this case.
1284 if (!pcms
->acpi_dev
|| !x86_machine_is_acpi_enabled(X86_MACHINE(pcms
))) {
1286 "memory hotplug is not enabled: missing acpi device or acpi disabled");
1290 if (is_nvdimm
&& !ms
->nvdimms_state
->is_enabled
) {
1291 error_setg(errp
, "nvdimm is not enabled: missing 'nvdimm' in '-M'");
1295 hotplug_handler_pre_plug(pcms
->acpi_dev
, dev
, &local_err
);
1297 error_propagate(errp
, local_err
);
1301 pc_dimm_pre_plug(PC_DIMM(dev
), MACHINE(hotplug_dev
),
1302 pcmc
->enforce_aligned_dimm
? NULL
: &legacy_align
, errp
);
1305 static void pc_memory_plug(HotplugHandler
*hotplug_dev
,
1306 DeviceState
*dev
, Error
**errp
)
1308 Error
*local_err
= NULL
;
1309 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1310 MachineState
*ms
= MACHINE(hotplug_dev
);
1311 bool is_nvdimm
= object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
);
1313 pc_dimm_plug(PC_DIMM(dev
), MACHINE(pcms
), &local_err
);
1319 nvdimm_plug(ms
->nvdimms_state
);
1322 hotplug_handler_plug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &error_abort
);
1324 error_propagate(errp
, local_err
);
1327 static void pc_memory_unplug_request(HotplugHandler
*hotplug_dev
,
1328 DeviceState
*dev
, Error
**errp
)
1330 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1333 * When -no-acpi is used with Q35 machine type, no ACPI is built,
1334 * but pcms->acpi_dev is still created. Check !acpi_enabled in
1335 * addition to cover this case.
1337 if (!pcms
->acpi_dev
|| !x86_machine_is_acpi_enabled(X86_MACHINE(pcms
))) {
1339 "memory hotplug is not enabled: missing acpi device or acpi disabled");
1343 if (object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
)) {
1344 error_setg(errp
, "nvdimm device hot unplug is not supported yet.");
1348 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
,
1352 static void pc_memory_unplug(HotplugHandler
*hotplug_dev
,
1353 DeviceState
*dev
, Error
**errp
)
1355 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1356 Error
*local_err
= NULL
;
1358 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &local_err
);
1363 pc_dimm_unplug(PC_DIMM(dev
), MACHINE(pcms
));
1364 qdev_unrealize(dev
);
1366 error_propagate(errp
, local_err
);
1369 static int pc_apic_cmp(const void *a
, const void *b
)
1371 CPUArchId
*apic_a
= (CPUArchId
*)a
;
1372 CPUArchId
*apic_b
= (CPUArchId
*)b
;
1374 return apic_a
->arch_id
- apic_b
->arch_id
;
1377 /* returns pointer to CPUArchId descriptor that matches CPU's apic_id
1378 * in ms->possible_cpus->cpus, if ms->possible_cpus->cpus has no
1379 * entry corresponding to CPU's apic_id returns NULL.
1381 static CPUArchId
*pc_find_cpu_slot(MachineState
*ms
, uint32_t id
, int *idx
)
1383 CPUArchId apic_id
, *found_cpu
;
1385 apic_id
.arch_id
= id
;
1386 found_cpu
= bsearch(&apic_id
, ms
->possible_cpus
->cpus
,
1387 ms
->possible_cpus
->len
, sizeof(*ms
->possible_cpus
->cpus
),
1389 if (found_cpu
&& idx
) {
1390 *idx
= found_cpu
- ms
->possible_cpus
->cpus
;
1395 static void pc_cpu_plug(HotplugHandler
*hotplug_dev
,
1396 DeviceState
*dev
, Error
**errp
)
1398 CPUArchId
*found_cpu
;
1399 Error
*local_err
= NULL
;
1400 X86CPU
*cpu
= X86_CPU(dev
);
1401 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1402 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1404 if (pcms
->acpi_dev
) {
1405 hotplug_handler_plug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &local_err
);
1411 /* increment the number of CPUs */
1414 rtc_set_cpus_count(x86ms
->rtc
, x86ms
->boot_cpus
);
1416 if (x86ms
->fw_cfg
) {
1417 fw_cfg_modify_i16(x86ms
->fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
1420 found_cpu
= pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, NULL
);
1421 found_cpu
->cpu
= OBJECT(dev
);
1423 error_propagate(errp
, local_err
);
1425 static void pc_cpu_unplug_request_cb(HotplugHandler
*hotplug_dev
,
1426 DeviceState
*dev
, Error
**errp
)
1429 X86CPU
*cpu
= X86_CPU(dev
);
1430 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1432 if (!pcms
->acpi_dev
) {
1433 error_setg(errp
, "CPU hot unplug not supported without ACPI");
1437 pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, &idx
);
1440 error_setg(errp
, "Boot CPU is unpluggable");
1444 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
,
1448 static void pc_cpu_unplug_cb(HotplugHandler
*hotplug_dev
,
1449 DeviceState
*dev
, Error
**errp
)
1451 CPUArchId
*found_cpu
;
1452 Error
*local_err
= NULL
;
1453 X86CPU
*cpu
= X86_CPU(dev
);
1454 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1455 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1457 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &local_err
);
1462 found_cpu
= pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, NULL
);
1463 found_cpu
->cpu
= NULL
;
1464 qdev_unrealize(dev
);
1466 /* decrement the number of CPUs */
1468 /* Update the number of CPUs in CMOS */
1469 rtc_set_cpus_count(x86ms
->rtc
, x86ms
->boot_cpus
);
1470 fw_cfg_modify_i16(x86ms
->fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
1472 error_propagate(errp
, local_err
);
1475 static void pc_cpu_pre_plug(HotplugHandler
*hotplug_dev
,
1476 DeviceState
*dev
, Error
**errp
)
1480 CPUArchId
*cpu_slot
;
1481 X86CPUTopoIDs topo_ids
;
1482 X86CPU
*cpu
= X86_CPU(dev
);
1483 CPUX86State
*env
= &cpu
->env
;
1484 MachineState
*ms
= MACHINE(hotplug_dev
);
1485 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1486 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1487 unsigned int smp_cores
= ms
->smp
.cores
;
1488 unsigned int smp_threads
= ms
->smp
.threads
;
1489 X86CPUTopoInfo topo_info
;
1491 if(!object_dynamic_cast(OBJECT(cpu
), ms
->cpu_type
)) {
1492 error_setg(errp
, "Invalid CPU type, expected cpu type: '%s'",
1497 init_topo_info(&topo_info
, x86ms
);
1499 env
->nr_dies
= x86ms
->smp_dies
;
1500 env
->nr_nodes
= topo_info
.nodes_per_pkg
;
1501 env
->pkg_offset
= x86ms
->apicid_pkg_offset(&topo_info
);
1504 * If APIC ID is not set,
1505 * set it based on socket/die/core/thread properties.
1507 if (cpu
->apic_id
== UNASSIGNED_APIC_ID
) {
1508 int max_socket
= (ms
->smp
.max_cpus
- 1) /
1509 smp_threads
/ smp_cores
/ x86ms
->smp_dies
;
1512 * die-id was optional in QEMU 4.0 and older, so keep it optional
1513 * if there's only one die per socket.
1515 if (cpu
->die_id
< 0 && x86ms
->smp_dies
== 1) {
1519 if (cpu
->socket_id
< 0) {
1520 error_setg(errp
, "CPU socket-id is not set");
1522 } else if (cpu
->socket_id
> max_socket
) {
1523 error_setg(errp
, "Invalid CPU socket-id: %u must be in range 0:%u",
1524 cpu
->socket_id
, max_socket
);
1527 if (cpu
->die_id
< 0) {
1528 error_setg(errp
, "CPU die-id is not set");
1530 } else if (cpu
->die_id
> x86ms
->smp_dies
- 1) {
1531 error_setg(errp
, "Invalid CPU die-id: %u must be in range 0:%u",
1532 cpu
->die_id
, x86ms
->smp_dies
- 1);
1535 if (cpu
->core_id
< 0) {
1536 error_setg(errp
, "CPU core-id is not set");
1538 } else if (cpu
->core_id
> (smp_cores
- 1)) {
1539 error_setg(errp
, "Invalid CPU core-id: %u must be in range 0:%u",
1540 cpu
->core_id
, smp_cores
- 1);
1543 if (cpu
->thread_id
< 0) {
1544 error_setg(errp
, "CPU thread-id is not set");
1546 } else if (cpu
->thread_id
> (smp_threads
- 1)) {
1547 error_setg(errp
, "Invalid CPU thread-id: %u must be in range 0:%u",
1548 cpu
->thread_id
, smp_threads
- 1);
1552 topo_ids
.pkg_id
= cpu
->socket_id
;
1553 topo_ids
.die_id
= cpu
->die_id
;
1554 topo_ids
.core_id
= cpu
->core_id
;
1555 topo_ids
.smt_id
= cpu
->thread_id
;
1556 cpu
->apic_id
= x86ms
->apicid_from_topo_ids(&topo_info
, &topo_ids
);
1559 cpu_slot
= pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, &idx
);
1561 MachineState
*ms
= MACHINE(pcms
);
1563 x86ms
->topo_ids_from_apicid(cpu
->apic_id
, &topo_info
, &topo_ids
);
1565 "Invalid CPU [socket: %u, die: %u, core: %u, thread: %u] with"
1566 " APIC ID %" PRIu32
", valid index range 0:%d",
1567 topo_ids
.pkg_id
, topo_ids
.die_id
, topo_ids
.core_id
, topo_ids
.smt_id
,
1568 cpu
->apic_id
, ms
->possible_cpus
->len
- 1);
1572 if (cpu_slot
->cpu
) {
1573 error_setg(errp
, "CPU[%d] with APIC ID %" PRIu32
" exists",
1578 /* if 'address' properties socket-id/core-id/thread-id are not set, set them
1579 * so that machine_query_hotpluggable_cpus would show correct values
1581 /* TODO: move socket_id/core_id/thread_id checks into x86_cpu_realizefn()
1582 * once -smp refactoring is complete and there will be CPU private
1583 * CPUState::nr_cores and CPUState::nr_threads fields instead of globals */
1584 x86ms
->topo_ids_from_apicid(cpu
->apic_id
, &topo_info
, &topo_ids
);
1585 if (cpu
->socket_id
!= -1 && cpu
->socket_id
!= topo_ids
.pkg_id
) {
1586 error_setg(errp
, "property socket-id: %u doesn't match set apic-id:"
1587 " 0x%x (socket-id: %u)", cpu
->socket_id
, cpu
->apic_id
,
1591 cpu
->socket_id
= topo_ids
.pkg_id
;
1593 if (cpu
->die_id
!= -1 && cpu
->die_id
!= topo_ids
.die_id
) {
1594 error_setg(errp
, "property die-id: %u doesn't match set apic-id:"
1595 " 0x%x (die-id: %u)", cpu
->die_id
, cpu
->apic_id
, topo_ids
.die_id
);
1598 cpu
->die_id
= topo_ids
.die_id
;
1600 if (cpu
->core_id
!= -1 && cpu
->core_id
!= topo_ids
.core_id
) {
1601 error_setg(errp
, "property core-id: %u doesn't match set apic-id:"
1602 " 0x%x (core-id: %u)", cpu
->core_id
, cpu
->apic_id
,
1606 cpu
->core_id
= topo_ids
.core_id
;
1608 if (cpu
->thread_id
!= -1 && cpu
->thread_id
!= topo_ids
.smt_id
) {
1609 error_setg(errp
, "property thread-id: %u doesn't match set apic-id:"
1610 " 0x%x (thread-id: %u)", cpu
->thread_id
, cpu
->apic_id
,
1614 cpu
->thread_id
= topo_ids
.smt_id
;
1616 if (hyperv_feat_enabled(cpu
, HYPERV_FEAT_VPINDEX
) &&
1617 !kvm_hv_vpindex_settable()) {
1618 error_setg(errp
, "kernel doesn't allow setting HyperV VP_INDEX");
1623 cs
->cpu_index
= idx
;
1625 numa_cpu_pre_plug(cpu_slot
, dev
, errp
);
1628 static void pc_virtio_md_pci_pre_plug(HotplugHandler
*hotplug_dev
,
1629 DeviceState
*dev
, Error
**errp
)
1631 HotplugHandler
*hotplug_dev2
= qdev_get_bus_hotplug_handler(dev
);
1632 Error
*local_err
= NULL
;
1634 if (!hotplug_dev2
&& dev
->hotplugged
) {
1636 * Without a bus hotplug handler, we cannot control the plug/unplug
1637 * order. We should never reach this point when hotplugging on x86,
1638 * however, better add a safety net.
1640 error_setg(errp
, "hotplug of virtio based memory devices not supported"
1645 * First, see if we can plug this memory device at all. If that
1646 * succeeds, branch of to the actual hotplug handler.
1648 memory_device_pre_plug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
), NULL
,
1650 if (!local_err
&& hotplug_dev2
) {
1651 hotplug_handler_pre_plug(hotplug_dev2
, dev
, &local_err
);
1653 error_propagate(errp
, local_err
);
1656 static void pc_virtio_md_pci_plug(HotplugHandler
*hotplug_dev
,
1657 DeviceState
*dev
, Error
**errp
)
1659 HotplugHandler
*hotplug_dev2
= qdev_get_bus_hotplug_handler(dev
);
1660 Error
*local_err
= NULL
;
1663 * Plug the memory device first and then branch off to the actual
1664 * hotplug handler. If that one fails, we can easily undo the memory
1667 memory_device_plug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
));
1669 hotplug_handler_plug(hotplug_dev2
, dev
, &local_err
);
1671 memory_device_unplug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
));
1674 error_propagate(errp
, local_err
);
1677 static void pc_virtio_md_pci_unplug_request(HotplugHandler
*hotplug_dev
,
1678 DeviceState
*dev
, Error
**errp
)
1680 /* We don't support hot unplug of virtio based memory devices */
1681 error_setg(errp
, "virtio based memory devices cannot be unplugged.");
1684 static void pc_virtio_md_pci_unplug(HotplugHandler
*hotplug_dev
,
1685 DeviceState
*dev
, Error
**errp
)
1687 /* We don't support hot unplug of virtio based memory devices */
1690 static void pc_machine_device_pre_plug_cb(HotplugHandler
*hotplug_dev
,
1691 DeviceState
*dev
, Error
**errp
)
1693 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1694 pc_memory_pre_plug(hotplug_dev
, dev
, errp
);
1695 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1696 pc_cpu_pre_plug(hotplug_dev
, dev
, errp
);
1697 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1698 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1699 pc_virtio_md_pci_pre_plug(hotplug_dev
, dev
, errp
);
1703 static void pc_machine_device_plug_cb(HotplugHandler
*hotplug_dev
,
1704 DeviceState
*dev
, Error
**errp
)
1706 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1707 pc_memory_plug(hotplug_dev
, dev
, errp
);
1708 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1709 pc_cpu_plug(hotplug_dev
, dev
, errp
);
1710 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1711 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1712 pc_virtio_md_pci_plug(hotplug_dev
, dev
, errp
);
1716 static void pc_machine_device_unplug_request_cb(HotplugHandler
*hotplug_dev
,
1717 DeviceState
*dev
, Error
**errp
)
1719 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1720 pc_memory_unplug_request(hotplug_dev
, dev
, errp
);
1721 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1722 pc_cpu_unplug_request_cb(hotplug_dev
, dev
, errp
);
1723 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1724 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1725 pc_virtio_md_pci_unplug_request(hotplug_dev
, dev
, errp
);
1727 error_setg(errp
, "acpi: device unplug request for not supported device"
1728 " type: %s", object_get_typename(OBJECT(dev
)));
1732 static void pc_machine_device_unplug_cb(HotplugHandler
*hotplug_dev
,
1733 DeviceState
*dev
, Error
**errp
)
1735 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1736 pc_memory_unplug(hotplug_dev
, dev
, errp
);
1737 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1738 pc_cpu_unplug_cb(hotplug_dev
, dev
, errp
);
1739 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1740 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1741 pc_virtio_md_pci_unplug(hotplug_dev
, dev
, errp
);
1743 error_setg(errp
, "acpi: device unplug for not supported device"
1744 " type: %s", object_get_typename(OBJECT(dev
)));
1748 static HotplugHandler
*pc_get_hotplug_handler(MachineState
*machine
,
1751 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
) ||
1752 object_dynamic_cast(OBJECT(dev
), TYPE_CPU
) ||
1753 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1754 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1755 return HOTPLUG_HANDLER(machine
);
1762 pc_machine_get_device_memory_region_size(Object
*obj
, Visitor
*v
,
1763 const char *name
, void *opaque
,
1766 MachineState
*ms
= MACHINE(obj
);
1769 if (ms
->device_memory
) {
1770 value
= memory_region_size(&ms
->device_memory
->mr
);
1773 visit_type_int(v
, name
, &value
, errp
);
1776 static void pc_machine_get_vmport(Object
*obj
, Visitor
*v
, const char *name
,
1777 void *opaque
, Error
**errp
)
1779 PCMachineState
*pcms
= PC_MACHINE(obj
);
1780 OnOffAuto vmport
= pcms
->vmport
;
1782 visit_type_OnOffAuto(v
, name
, &vmport
, errp
);
1785 static void pc_machine_set_vmport(Object
*obj
, Visitor
*v
, const char *name
,
1786 void *opaque
, Error
**errp
)
1788 PCMachineState
*pcms
= PC_MACHINE(obj
);
1790 visit_type_OnOffAuto(v
, name
, &pcms
->vmport
, errp
);
1793 static bool pc_machine_get_smbus(Object
*obj
, Error
**errp
)
1795 PCMachineState
*pcms
= PC_MACHINE(obj
);
1797 return pcms
->smbus_enabled
;
1800 static void pc_machine_set_smbus(Object
*obj
, bool value
, Error
**errp
)
1802 PCMachineState
*pcms
= PC_MACHINE(obj
);
1804 pcms
->smbus_enabled
= value
;
1807 static bool pc_machine_get_sata(Object
*obj
, Error
**errp
)
1809 PCMachineState
*pcms
= PC_MACHINE(obj
);
1811 return pcms
->sata_enabled
;
1814 static void pc_machine_set_sata(Object
*obj
, bool value
, Error
**errp
)
1816 PCMachineState
*pcms
= PC_MACHINE(obj
);
1818 pcms
->sata_enabled
= value
;
1821 static bool pc_machine_get_pit(Object
*obj
, Error
**errp
)
1823 PCMachineState
*pcms
= PC_MACHINE(obj
);
1825 return pcms
->pit_enabled
;
1828 static void pc_machine_set_pit(Object
*obj
, bool value
, Error
**errp
)
1830 PCMachineState
*pcms
= PC_MACHINE(obj
);
1832 pcms
->pit_enabled
= value
;
1835 static void pc_machine_get_max_ram_below_4g(Object
*obj
, Visitor
*v
,
1836 const char *name
, void *opaque
,
1839 PCMachineState
*pcms
= PC_MACHINE(obj
);
1840 uint64_t value
= pcms
->max_ram_below_4g
;
1842 visit_type_size(v
, name
, &value
, errp
);
1845 static void pc_machine_set_max_ram_below_4g(Object
*obj
, Visitor
*v
,
1846 const char *name
, void *opaque
,
1849 PCMachineState
*pcms
= PC_MACHINE(obj
);
1852 if (!visit_type_size(v
, name
, &value
, errp
)) {
1855 if (value
> 4 * GiB
) {
1857 "Machine option 'max-ram-below-4g=%"PRIu64
1858 "' expects size less than or equal to 4G", value
);
1862 if (value
< 1 * MiB
) {
1863 warn_report("Only %" PRIu64
" bytes of RAM below the 4GiB boundary,"
1864 "BIOS may not work with less than 1MiB", value
);
1867 pcms
->max_ram_below_4g
= value
;
1870 static void pc_machine_initfn(Object
*obj
)
1872 PCMachineState
*pcms
= PC_MACHINE(obj
);
1874 #ifdef CONFIG_VMPORT
1875 pcms
->vmport
= ON_OFF_AUTO_AUTO
;
1877 pcms
->vmport
= ON_OFF_AUTO_OFF
;
1878 #endif /* CONFIG_VMPORT */
1879 pcms
->max_ram_below_4g
= 0; /* use default */
1880 /* acpi build is enabled by default if machine supports it */
1881 pcms
->acpi_build_enabled
= PC_MACHINE_GET_CLASS(pcms
)->has_acpi_build
;
1882 pcms
->smbus_enabled
= true;
1883 pcms
->sata_enabled
= true;
1884 pcms
->pit_enabled
= true;
1886 pc_system_flash_create(pcms
);
1887 pcms
->pcspk
= isa_new(TYPE_PC_SPEAKER
);
1888 object_property_add_alias(OBJECT(pcms
), "pcspk-audiodev",
1889 OBJECT(pcms
->pcspk
), "audiodev");
1892 static void pc_machine_reset(MachineState
*machine
)
1897 qemu_devices_reset();
1899 /* Reset APIC after devices have been reset to cancel
1900 * any changes that qemu_devices_reset() might have done.
1905 if (cpu
->apic_state
) {
1906 device_legacy_reset(cpu
->apic_state
);
1911 static void pc_machine_wakeup(MachineState
*machine
)
1913 cpu_synchronize_all_states();
1914 pc_machine_reset(machine
);
1915 cpu_synchronize_all_post_reset();
1918 static bool pc_hotplug_allowed(MachineState
*ms
, DeviceState
*dev
, Error
**errp
)
1920 X86IOMMUState
*iommu
= x86_iommu_get_default();
1921 IntelIOMMUState
*intel_iommu
;
1924 object_dynamic_cast((Object
*)iommu
, TYPE_INTEL_IOMMU_DEVICE
) &&
1925 object_dynamic_cast((Object
*)dev
, "vfio-pci")) {
1926 intel_iommu
= INTEL_IOMMU_DEVICE(iommu
);
1927 if (!intel_iommu
->caching_mode
) {
1928 error_setg(errp
, "Device assignment is not allowed without "
1929 "enabling caching-mode=on for Intel IOMMU.");
1937 static void pc_machine_class_init(ObjectClass
*oc
, void *data
)
1939 MachineClass
*mc
= MACHINE_CLASS(oc
);
1940 PCMachineClass
*pcmc
= PC_MACHINE_CLASS(oc
);
1941 HotplugHandlerClass
*hc
= HOTPLUG_HANDLER_CLASS(oc
);
1943 pcmc
->pci_enabled
= true;
1944 pcmc
->has_acpi_build
= true;
1945 pcmc
->rsdp_in_ram
= true;
1946 pcmc
->smbios_defaults
= true;
1947 pcmc
->smbios_uuid_encoded
= true;
1948 pcmc
->gigabyte_align
= true;
1949 pcmc
->has_reserved_memory
= true;
1950 pcmc
->kvmclock_enabled
= true;
1951 pcmc
->enforce_aligned_dimm
= true;
1952 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported
1953 * to be used at the moment, 32K should be enough for a while. */
1954 pcmc
->acpi_data_size
= 0x20000 + 0x8000;
1955 pcmc
->linuxboot_dma_enabled
= true;
1956 pcmc
->pvh_enabled
= true;
1957 assert(!mc
->get_hotplug_handler
);
1958 mc
->get_hotplug_handler
= pc_get_hotplug_handler
;
1959 mc
->hotplug_allowed
= pc_hotplug_allowed
;
1960 mc
->cpu_index_to_instance_props
= x86_cpu_index_to_props
;
1961 mc
->get_default_cpu_node_id
= x86_get_default_cpu_node_id
;
1962 mc
->possible_cpu_arch_ids
= x86_possible_cpu_arch_ids
;
1963 mc
->auto_enable_numa_with_memhp
= true;
1964 mc
->auto_enable_numa_with_memdev
= true;
1965 mc
->has_hotpluggable_cpus
= true;
1966 mc
->default_boot_order
= "cad";
1967 mc
->hot_add_cpu
= pc_hot_add_cpu
;
1968 mc
->smp_parse
= pc_smp_parse
;
1969 mc
->block_default_type
= IF_IDE
;
1971 mc
->reset
= pc_machine_reset
;
1972 mc
->wakeup
= pc_machine_wakeup
;
1973 hc
->pre_plug
= pc_machine_device_pre_plug_cb
;
1974 hc
->plug
= pc_machine_device_plug_cb
;
1975 hc
->unplug_request
= pc_machine_device_unplug_request_cb
;
1976 hc
->unplug
= pc_machine_device_unplug_cb
;
1977 mc
->default_cpu_type
= TARGET_DEFAULT_CPU_TYPE
;
1978 mc
->nvdimm_supported
= true;
1979 mc
->default_ram_id
= "pc.ram";
1981 object_class_property_add(oc
, PC_MACHINE_MAX_RAM_BELOW_4G
, "size",
1982 pc_machine_get_max_ram_below_4g
, pc_machine_set_max_ram_below_4g
,
1984 object_class_property_set_description(oc
, PC_MACHINE_MAX_RAM_BELOW_4G
,
1985 "Maximum ram below the 4G boundary (32bit boundary)");
1987 object_class_property_add(oc
, PC_MACHINE_DEVMEM_REGION_SIZE
, "int",
1988 pc_machine_get_device_memory_region_size
, NULL
,
1991 object_class_property_add(oc
, PC_MACHINE_VMPORT
, "OnOffAuto",
1992 pc_machine_get_vmport
, pc_machine_set_vmport
,
1994 object_class_property_set_description(oc
, PC_MACHINE_VMPORT
,
1995 "Enable vmport (pc & q35)");
1997 object_class_property_add_bool(oc
, PC_MACHINE_SMBUS
,
1998 pc_machine_get_smbus
, pc_machine_set_smbus
);
2000 object_class_property_add_bool(oc
, PC_MACHINE_SATA
,
2001 pc_machine_get_sata
, pc_machine_set_sata
);
2003 object_class_property_add_bool(oc
, PC_MACHINE_PIT
,
2004 pc_machine_get_pit
, pc_machine_set_pit
);
2007 static const TypeInfo pc_machine_info
= {
2008 .name
= TYPE_PC_MACHINE
,
2009 .parent
= TYPE_X86_MACHINE
,
2011 .instance_size
= sizeof(PCMachineState
),
2012 .instance_init
= pc_machine_initfn
,
2013 .class_size
= sizeof(PCMachineClass
),
2014 .class_init
= pc_machine_class_init
,
2015 .interfaces
= (InterfaceInfo
[]) {
2016 { TYPE_HOTPLUG_HANDLER
},
2021 static void pc_machine_register_types(void)
2023 type_register_static(&pc_machine_info
);
2026 type_init(pc_machine_register_types
)