hw/misc/bcm2835_property.c

   1 /*
   2  * Raspberry Pi emulation (c) 2012 Gregory Estrade
   3  *
   4  * This work is licensed under the terms of the GNU GPL, version 2 or later.
   5  * See the COPYING file in the top-level directory.
   6  */
   7
   8 #include "qemu/osdep.h"
   9 #include "qapi/error.h"
  10 #include "hw/misc/bcm2835_property.h"
  11 #include "hw/qdev-properties.h"
  12 #include "migration/vmstate.h"
  13 #include "hw/irq.h"
  14 #include "hw/misc/bcm2835_mbox_defs.h"
  15 #include "sysemu/dma.h"
  16 #include "qemu/log.h"
  17 #include "qemu/module.h"
  18 #include "trace.h"
  19
  20 /* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
  21
  22 static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
  23 {
  24     uint32_t tag;
  25     uint32_t bufsize;
  26     uint32_t tot_len;
  27     size_t resplen;
  28     uint32_t tmp;
  29     int n;
  30     uint32_t offset, length, color;
  31
  32     /*
  33      * Copy the current state of the framebuffer config; we will update
  34      * this copy as we process tags and then ask the framebuffer to use
  35      * it at the end.
  36      */
  37     BCM2835FBConfig fbconfig = s->fbdev->config;
  38     bool fbconfig_updated = false;
  39
  40     value &= ~0xf;
  41
  42     s->addr = value;
  43
  44     tot_len = ldl_le_phys(&s->dma_as, value);
  45
  46     /* @(addr + 4) : Buffer response code */
  47     value = s->addr + 8;
  48     while (value + 8 <= s->addr + tot_len) {
  49         tag = ldl_le_phys(&s->dma_as, value);
  50         bufsize = ldl_le_phys(&s->dma_as, value + 4);
  51         /* @(value + 8) : Request/response indicator */
  52         resplen = 0;
  53         switch (tag) {
  54         case 0x00000000: /* End tag */
  55             break;
  56         case 0x00000001: /* Get firmware revision */
  57             stl_le_phys(&s->dma_as, value + 12, 346337);
  58             resplen = 4;
  59             break;
  60         case 0x00010001: /* Get board model */
  61             qemu_log_mask(LOG_UNIMP,
  62                           "bcm2835_property: 0x%08x get board model NYI\n",
  63                           tag);
  64             resplen = 4;
  65             break;
  66         case 0x00010002: /* Get board revision */
  67             stl_le_phys(&s->dma_as, value + 12, s->board_rev);
  68             resplen = 4;
  69             break;
  70         case 0x00010003: /* Get board MAC address */
  71             resplen = sizeof(s->macaddr.a);
  72             dma_memory_write(&s->dma_as, value + 12, s->macaddr.a, resplen);
  73             break;
  74         case 0x00010004: /* Get board serial */
  75             qemu_log_mask(LOG_UNIMP,
  76                           "bcm2835_property: 0x%08x get board serial NYI\n",
  77                           tag);
  78             resplen = 8;
  79             break;
  80         case 0x00010005: /* Get ARM memory */
  81             /* base */
  82             stl_le_phys(&s->dma_as, value + 12, 0);
  83             /* size */
  84             stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_base);
  85             resplen = 8;
  86             break;
  87         case 0x00010006: /* Get VC memory */
  88             /* base */
  89             stl_le_phys(&s->dma_as, value + 12, s->fbdev->vcram_base);
  90             /* size */
  91             stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_size);
  92             resplen = 8;
  93             break;
  94         case 0x00028001: /* Set power state */
  95             /* Assume that whatever device they asked for exists,
  96              * and we'll just claim we set it to the desired state
  97              */
  98             tmp = ldl_le_phys(&s->dma_as, value + 16);
  99             stl_le_phys(&s->dma_as, value + 16, (tmp & 1));
 100             resplen = 8;
 101             break;
 102
 103         /* Clocks */
 104
 105         case 0x00030001: /* Get clock state */
 106             stl_le_phys(&s->dma_as, value + 16, 0x1);
 107             resplen = 8;
 108             break;
 109
 110         case 0x00038001: /* Set clock state */
 111             qemu_log_mask(LOG_UNIMP,
 112                           "bcm2835_property: 0x%08x set clock state NYI\n",
 113                           tag);
 114             resplen = 8;
 115             break;
 116
 117         case 0x00030002: /* Get clock rate */
 118         case 0x00030004: /* Get max clock rate */
 119         case 0x00030007: /* Get min clock rate */
 120             switch (ldl_le_phys(&s->dma_as, value + 12)) {
 121             case 1: /* EMMC */
 122                 stl_le_phys(&s->dma_as, value + 16, 50000000);
 123                 break;
 124             case 2: /* UART */
 125                 stl_le_phys(&s->dma_as, value + 16, 3000000);
 126                 break;
 127             default:
 128                 stl_le_phys(&s->dma_as, value + 16, 700000000);
 129                 break;
 130             }
 131             resplen = 8;
 132             break;
 133
 134         case 0x00038002: /* Set clock rate */
 135         case 0x00038004: /* Set max clock rate */
 136         case 0x00038007: /* Set min clock rate */
 137             qemu_log_mask(LOG_UNIMP,
 138                           "bcm2835_property: 0x%08x set clock rate NYI\n",
 139                           tag);
 140             resplen = 8;
 141             break;
 142
 143         /* Temperature */
 144
 145         case 0x00030006: /* Get temperature */
 146             stl_le_phys(&s->dma_as, value + 16, 25000);
 147             resplen = 8;
 148             break;
 149
 150         case 0x0003000A: /* Get max temperature */
 151             stl_le_phys(&s->dma_as, value + 16, 99000);
 152             resplen = 8;
 153             break;
 154
 155         /* Frame buffer */
 156
 157         case 0x00040001: /* Allocate buffer */
 158             stl_le_phys(&s->dma_as, value + 12, fbconfig.base);
 159             stl_le_phys(&s->dma_as, value + 16,
 160                         bcm2835_fb_get_size(&fbconfig));
 161             resplen = 8;
 162             break;
 163         case 0x00048001: /* Release buffer */
 164             resplen = 0;
 165             break;
 166         case 0x00040002: /* Blank screen */
 167             resplen = 4;
 168             break;
 169         case 0x00044003: /* Test physical display width/height */
 170         case 0x00044004: /* Test virtual display width/height */
 171             resplen = 8;
 172             break;
 173         case 0x00048003: /* Set physical display width/height */
 174             fbconfig.xres = ldl_le_phys(&s->dma_as, value + 12);
 175             fbconfig.yres = ldl_le_phys(&s->dma_as, value + 16);
 176             bcm2835_fb_validate_config(&fbconfig);
 177             fbconfig_updated = true;
 178             /* fall through */
 179         case 0x00040003: /* Get physical display width/height */
 180             stl_le_phys(&s->dma_as, value + 12, fbconfig.xres);
 181             stl_le_phys(&s->dma_as, value + 16, fbconfig.yres);
 182             resplen = 8;
 183             break;
 184         case 0x00048004: /* Set virtual display width/height */
 185             fbconfig.xres_virtual = ldl_le_phys(&s->dma_as, value + 12);
 186             fbconfig.yres_virtual = ldl_le_phys(&s->dma_as, value + 16);
 187             bcm2835_fb_validate_config(&fbconfig);
 188             fbconfig_updated = true;
 189             /* fall through */
 190         case 0x00040004: /* Get virtual display width/height */
 191             stl_le_phys(&s->dma_as, value + 12, fbconfig.xres_virtual);
 192             stl_le_phys(&s->dma_as, value + 16, fbconfig.yres_virtual);
 193             resplen = 8;
 194             break;
 195         case 0x00044005: /* Test depth */
 196             resplen = 4;
 197             break;
 198         case 0x00048005: /* Set depth */
 199             fbconfig.bpp = ldl_le_phys(&s->dma_as, value + 12);
 200             bcm2835_fb_validate_config(&fbconfig);
 201             fbconfig_updated = true;
 202             /* fall through */
 203         case 0x00040005: /* Get depth */
 204             stl_le_phys(&s->dma_as, value + 12, fbconfig.bpp);
 205             resplen = 4;
 206             break;
 207         case 0x00044006: /* Test pixel order */
 208             resplen = 4;
 209             break;
 210         case 0x00048006: /* Set pixel order */
 211             fbconfig.pixo = ldl_le_phys(&s->dma_as, value + 12);
 212             bcm2835_fb_validate_config(&fbconfig);
 213             fbconfig_updated = true;
 214             /* fall through */
 215         case 0x00040006: /* Get pixel order */
 216             stl_le_phys(&s->dma_as, value + 12, fbconfig.pixo);
 217             resplen = 4;
 218             break;
 219         case 0x00044007: /* Test pixel alpha */
 220             resplen = 4;
 221             break;
 222         case 0x00048007: /* Set alpha */
 223             fbconfig.alpha = ldl_le_phys(&s->dma_as, value + 12);
 224             bcm2835_fb_validate_config(&fbconfig);
 225             fbconfig_updated = true;
 226             /* fall through */
 227         case 0x00040007: /* Get alpha */
 228             stl_le_phys(&s->dma_as, value + 12, fbconfig.alpha);
 229             resplen = 4;
 230             break;
 231         case 0x00040008: /* Get pitch */
 232             stl_le_phys(&s->dma_as, value + 12,
 233                         bcm2835_fb_get_pitch(&fbconfig));
 234             resplen = 4;
 235             break;
 236         case 0x00044009: /* Test virtual offset */
 237             resplen = 8;
 238             break;
 239         case 0x00048009: /* Set virtual offset */
 240             fbconfig.xoffset = ldl_le_phys(&s->dma_as, value + 12);
 241             fbconfig.yoffset = ldl_le_phys(&s->dma_as, value + 16);
 242             bcm2835_fb_validate_config(&fbconfig);
 243             fbconfig_updated = true;
 244             /* fall through */
 245         case 0x00040009: /* Get virtual offset */
 246             stl_le_phys(&s->dma_as, value + 12, fbconfig.xoffset);
 247             stl_le_phys(&s->dma_as, value + 16, fbconfig.yoffset);
 248             resplen = 8;
 249             break;
 250         case 0x0004000a: /* Get/Test/Set overscan */
 251         case 0x0004400a:
 252         case 0x0004800a:
 253             stl_le_phys(&s->dma_as, value + 12, 0);
 254             stl_le_phys(&s->dma_as, value + 16, 0);
 255             stl_le_phys(&s->dma_as, value + 20, 0);
 256             stl_le_phys(&s->dma_as, value + 24, 0);
 257             resplen = 16;
 258             break;
 259         case 0x0004800b: /* Set palette */
 260             offset = ldl_le_phys(&s->dma_as, value + 12);
 261             length = ldl_le_phys(&s->dma_as, value + 16);
 262             n = 0;
 263             while (n < length - offset) {
 264                 color = ldl_le_phys(&s->dma_as, value + 20 + (n << 2));
 265                 stl_le_phys(&s->dma_as,
 266                             s->fbdev->vcram_base + ((offset + n) << 2), color);
 267                 n++;
 268             }
 269             stl_le_phys(&s->dma_as, value + 12, 0);
 270             resplen = 4;
 271             break;
 272
 273         case 0x00060001: /* Get DMA channels */
 274             /* channels 2-5 */
 275             stl_le_phys(&s->dma_as, value + 12, 0x003C);
 276             resplen = 4;
 277             break;
 278
 279         case 0x00050001: /* Get command line */
 280             resplen = 0;
 281             break;
 282
 283         default:
 284             qemu_log_mask(LOG_UNIMP,
 285                           "bcm2835_property: unhandled tag 0x%08x\n", tag);
 286             break;
 287         }
 288
 289         trace_bcm2835_mbox_property(tag, bufsize, resplen);
 290         if (tag == 0) {
 291             break;
 292         }
 293
 294         stl_le_phys(&s->dma_as, value + 8, (1 << 31) | resplen);
 295         value += bufsize + 12;
 296     }
 297
 298     /* Reconfigure framebuffer if required */
 299     if (fbconfig_updated) {
 300         bcm2835_fb_reconfigure(s->fbdev, &fbconfig);
 301     }
 302
 303     /* Buffer response code */
 304     stl_le_phys(&s->dma_as, s->addr + 4, (1 << 31));
 305 }
 306
 307 static uint64_t bcm2835_property_read(void *opaque, hwaddr offset,
 308                                       unsigned size)
 309 {
 310     BCM2835PropertyState *s = opaque;
 311     uint32_t res = 0;
 312
 313     switch (offset) {
 314     case MBOX_AS_DATA:
 315         res = MBOX_CHAN_PROPERTY | s->addr;
 316         s->pending = false;
 317         qemu_set_irq(s->mbox_irq, 0);
 318         break;
 319
 320     case MBOX_AS_PENDING:
 321         res = s->pending;
 322         break;
 323
 324     default:
 325         qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
 326                       __func__, offset);
 327         return 0;
 328     }
 329
 330     return res;
 331 }
 332
 333 static void bcm2835_property_write(void *opaque, hwaddr offset,
 334                                    uint64_t value, unsigned size)
 335 {
 336     BCM2835PropertyState *s = opaque;
 337
 338     switch (offset) {
 339     case MBOX_AS_DATA:
 340         /* bcm2835_mbox should check our pending status before pushing */
 341         assert(!s->pending);
 342         s->pending = true;
 343         bcm2835_property_mbox_push(s, value);
 344         qemu_set_irq(s->mbox_irq, 1);
 345         break;
 346
 347     default:
 348         qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
 349                       __func__, offset);
 350         return;
 351     }
 352 }
 353
 354 static const MemoryRegionOps bcm2835_property_ops = {
 355     .read = bcm2835_property_read,
 356     .write = bcm2835_property_write,
 357     .endianness = DEVICE_NATIVE_ENDIAN,
 358     .valid.min_access_size = 4,
 359     .valid.max_access_size = 4,
 360 };
 361
 362 static const VMStateDescription vmstate_bcm2835_property = {
 363     .name = TYPE_BCM2835_PROPERTY,
 364     .version_id = 1,
 365     .minimum_version_id = 1,
 366     .fields      = (VMStateField[]) {
 367         VMSTATE_MACADDR(macaddr, BCM2835PropertyState),
 368         VMSTATE_UINT32(addr, BCM2835PropertyState),
 369         VMSTATE_BOOL(pending, BCM2835PropertyState),
 370         VMSTATE_END_OF_LIST()
 371     }
 372 };
 373
 374 static void bcm2835_property_init(Object *obj)
 375 {
 376     BCM2835PropertyState *s = BCM2835_PROPERTY(obj);
 377
 378     memory_region_init_io(&s->iomem, OBJECT(s), &bcm2835_property_ops, s,
 379                           TYPE_BCM2835_PROPERTY, 0x10);
 380     sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
 381     sysbus_init_irq(SYS_BUS_DEVICE(s), &s->mbox_irq);
 382 }
 383
 384 static void bcm2835_property_reset(DeviceState *dev)
 385 {
 386     BCM2835PropertyState *s = BCM2835_PROPERTY(dev);
 387
 388     s->pending = false;
 389 }
 390
 391 static void bcm2835_property_realize(DeviceState *dev, Error **errp)
 392 {
 393     BCM2835PropertyState *s = BCM2835_PROPERTY(dev);
 394     Object *obj;
 395
 396     obj = object_property_get_link(OBJECT(dev), "fb", &error_abort);
 397     s->fbdev = BCM2835_FB(obj);
 398
 399     obj = object_property_get_link(OBJECT(dev), "dma-mr", &error_abort);
 400     s->dma_mr = MEMORY_REGION(obj);
 401     address_space_init(&s->dma_as, s->dma_mr, TYPE_BCM2835_PROPERTY "-memory");
 402
 403     /* TODO: connect to MAC address of USB NIC device, once we emulate it */
 404     qemu_macaddr_default_if_unset(&s->macaddr);
 405
 406     bcm2835_property_reset(dev);
 407 }
 408
 409 static Property bcm2835_property_props[] = {
 410     DEFINE_PROP_UINT32("board-rev", BCM2835PropertyState, board_rev, 0),
 411     DEFINE_PROP_END_OF_LIST()
 412 };
 413
 414 static void bcm2835_property_class_init(ObjectClass *klass, void *data)
 415 {
 416     DeviceClass *dc = DEVICE_CLASS(klass);
 417
 418     device_class_set_props(dc, bcm2835_property_props);
 419     dc->realize = bcm2835_property_realize;
 420     dc->vmsd = &vmstate_bcm2835_property;
 421 }
 422
 423 static TypeInfo bcm2835_property_info = {
 424     .name          = TYPE_BCM2835_PROPERTY,
 425     .parent        = TYPE_SYS_BUS_DEVICE,
 426     .instance_size = sizeof(BCM2835PropertyState),
 427     .class_init    = bcm2835_property_class_init,
 428     .instance_init = bcm2835_property_init,
 429 };
 430
 431 static void bcm2835_property_register_types(void)
 432 {
 433     type_register_static(&bcm2835_property_info);
 434 }
 435
 436 type_init(bcm2835_property_register_types)