hw/char/exynos4210_uart.c

   1 /*
   2  *  Exynos4210 UART Emulation
   3  *
   4  *  Copyright (C) 2011 Samsung Electronics Co Ltd.
   5  *    Maksim Kozlov, <m.kozlov@samsung.com>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify it
   8  *  under the terms of the GNU General Public License as published by the
   9  *  Free Software Foundation; either version 2 of the License, or
  10  *  (at your option) any later version.
  11  *
  12  *  This program is distributed in the hope that it will be useful, but WITHOUT
  13  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  15  *  for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License along
  18  *  with this program; if not, see <http://www.gnu.org/licenses/>.
  19  *
  20  */
  21
  22 #include "qemu/osdep.h"
  23 #include "hw/sysbus.h"
  24 #include "migration/vmstate.h"
  25 #include "qapi/error.h"
  26 #include "qemu/error-report.h"
  27 #include "qemu/module.h"
  28 #include "qemu/timer.h"
  29 #include "chardev/char-fe.h"
  30 #include "chardev/char-serial.h"
  31
  32 #include "hw/arm/exynos4210.h"
  33 #include "hw/irq.h"
  34 #include "hw/qdev-properties.h"
  35 #include "hw/qdev-properties-system.h"
  36
  37 #include "trace.h"
  38 #include "qom/object.h"
  39
  40 /*
  41  *  Offsets for UART registers relative to SFR base address
  42  *  for UARTn
  43  *
  44  */
  45 #define ULCON      0x0000 /* Line Control             */
  46 #define UCON       0x0004 /* Control                  */
  47 #define UFCON      0x0008 /* FIFO Control             */
  48 #define UMCON      0x000C /* Modem Control            */
  49 #define UTRSTAT    0x0010 /* Tx/Rx Status             */
  50 #define UERSTAT    0x0014 /* UART Error Status        */
  51 #define UFSTAT     0x0018 /* FIFO Status              */
  52 #define UMSTAT     0x001C /* Modem Status             */
  53 #define UTXH       0x0020 /* Transmit Buffer          */
  54 #define URXH       0x0024 /* Receive Buffer           */
  55 #define UBRDIV     0x0028 /* Baud Rate Divisor        */
  56 #define UFRACVAL   0x002C /* Divisor Fractional Value */
  57 #define UINTP      0x0030 /* Interrupt Pending        */
  58 #define UINTSP     0x0034 /* Interrupt Source Pending */
  59 #define UINTM      0x0038 /* Interrupt Mask           */
  60
  61 /*
  62  * for indexing register in the uint32_t array
  63  *
  64  * 'reg' - register offset (see offsets definitions above)
  65  *
  66  */
  67 #define I_(reg) (reg / sizeof(uint32_t))
  68
  69 typedef struct Exynos4210UartReg {
  70     const char         *name; /* the only reason is the debug output */
  71     hwaddr  offset;
  72     uint32_t            reset_value;
  73 } Exynos4210UartReg;
  74
  75 static const Exynos4210UartReg exynos4210_uart_regs[] = {
  76     {"ULCON",    ULCON,    0x00000000},
  77     {"UCON",     UCON,     0x00003000},
  78     {"UFCON",    UFCON,    0x00000000},
  79     {"UMCON",    UMCON,    0x00000000},
  80     {"UTRSTAT",  UTRSTAT,  0x00000006}, /* RO */
  81     {"UERSTAT",  UERSTAT,  0x00000000}, /* RO */
  82     {"UFSTAT",   UFSTAT,   0x00000000}, /* RO */
  83     {"UMSTAT",   UMSTAT,   0x00000000}, /* RO */
  84     {"UTXH",     UTXH,     0x5c5c5c5c}, /* WO, undefined reset value*/
  85     {"URXH",     URXH,     0x00000000}, /* RO */
  86     {"UBRDIV",   UBRDIV,   0x00000000},
  87     {"UFRACVAL", UFRACVAL, 0x00000000},
  88     {"UINTP",    UINTP,    0x00000000},
  89     {"UINTSP",   UINTSP,   0x00000000},
  90     {"UINTM",    UINTM,    0x00000000},
  91 };
  92
  93 #define EXYNOS4210_UART_REGS_MEM_SIZE    0x3C
  94
  95 /* UART FIFO Control */
  96 #define UFCON_FIFO_ENABLE                    0x1
  97 #define UFCON_Rx_FIFO_RESET                  0x2
  98 #define UFCON_Tx_FIFO_RESET                  0x4
  99 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT    8
 100 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT)
 101 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT    4
 102 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT)
 103
 104 /* Uart FIFO Status */
 105 #define UFSTAT_Rx_FIFO_COUNT        0xff
 106 #define UFSTAT_Rx_FIFO_FULL         0x100
 107 #define UFSTAT_Rx_FIFO_ERROR        0x200
 108 #define UFSTAT_Tx_FIFO_COUNT_SHIFT  16
 109 #define UFSTAT_Tx_FIFO_COUNT        (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT)
 110 #define UFSTAT_Tx_FIFO_FULL_SHIFT   24
 111 #define UFSTAT_Tx_FIFO_FULL         (1 << UFSTAT_Tx_FIFO_FULL_SHIFT)
 112
 113 /* UART Interrupt Source Pending */
 114 #define UINTSP_RXD      0x1 /* Receive interrupt  */
 115 #define UINTSP_ERROR    0x2 /* Error interrupt    */
 116 #define UINTSP_TXD      0x4 /* Transmit interrupt */
 117 #define UINTSP_MODEM    0x8 /* Modem interrupt    */
 118
 119 /* UART Line Control */
 120 #define ULCON_IR_MODE_SHIFT   6
 121 #define ULCON_PARITY_SHIFT    3
 122 #define ULCON_STOP_BIT_SHIFT  1
 123
 124 /* UART Tx/Rx Status */
 125 #define UTRSTAT_Rx_TIMEOUT              0x8
 126 #define UTRSTAT_TRANSMITTER_EMPTY       0x4
 127 #define UTRSTAT_Tx_BUFFER_EMPTY         0x2
 128 #define UTRSTAT_Rx_BUFFER_DATA_READY    0x1
 129
 130 /* UART Error Status */
 131 #define UERSTAT_OVERRUN  0x1
 132 #define UERSTAT_PARITY   0x2
 133 #define UERSTAT_FRAME    0x4
 134 #define UERSTAT_BREAK    0x8
 135
 136 typedef struct {
 137     uint8_t    *data;
 138     uint32_t    sp, rp; /* store and retrieve pointers */
 139     uint32_t    size;
 140 } Exynos4210UartFIFO;
 141
 142 #define TYPE_EXYNOS4210_UART "exynos4210.uart"
 143 OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210UartState, EXYNOS4210_UART)
 144
 145 struct Exynos4210UartState {
 146     SysBusDevice parent_obj;
 147
 148     MemoryRegion iomem;
 149
 150     uint32_t             reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)];
 151     Exynos4210UartFIFO   rx;
 152     Exynos4210UartFIFO   tx;
 153
 154     QEMUTimer *fifo_timeout_timer;
 155     uint64_t wordtime;        /* word time in ns */
 156
 157     CharBackend       chr;
 158     qemu_irq          irq;
 159     qemu_irq          dmairq;
 160
 161     uint32_t channel;
 162
 163 };
 164
 165
 166 /* Used only for tracing */
 167 static const char *exynos4210_uart_regname(hwaddr  offset)
 168 {
 169
 170     int i;
 171
 172     for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
 173         if (offset == exynos4210_uart_regs[i].offset) {
 174             return exynos4210_uart_regs[i].name;
 175         }
 176     }
 177
 178     return NULL;
 179 }
 180
 181
 182 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch)
 183 {
 184     q->data[q->sp] = ch;
 185     q->sp = (q->sp + 1) % q->size;
 186 }
 187
 188 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q)
 189 {
 190     uint8_t ret = q->data[q->rp];
 191     q->rp = (q->rp + 1) % q->size;
 192     return  ret;
 193 }
 194
 195 static int fifo_elements_number(const Exynos4210UartFIFO *q)
 196 {
 197     if (q->sp < q->rp) {
 198         return q->size - q->rp + q->sp;
 199     }
 200
 201     return q->sp - q->rp;
 202 }
 203
 204 static int fifo_empty_elements_number(const Exynos4210UartFIFO *q)
 205 {
 206     return q->size - fifo_elements_number(q);
 207 }
 208
 209 static void fifo_reset(Exynos4210UartFIFO *q)
 210 {
 211     g_free(q->data);
 212     q->data = NULL;
 213
 214     q->data = g_malloc0(q->size);
 215
 216     q->sp = 0;
 217     q->rp = 0;
 218 }
 219
 220 static uint32_t exynos4210_uart_FIFO_trigger_level(uint32_t channel,
 221                                                    uint32_t reg)
 222 {
 223     uint32_t level;
 224
 225     switch (channel) {
 226     case 0:
 227         level = reg * 32;
 228         break;
 229     case 1:
 230     case 4:
 231         level = reg * 8;
 232         break;
 233     case 2:
 234     case 3:
 235         level = reg * 2;
 236         break;
 237     default:
 238         level = 0;
 239         trace_exynos_uart_channel_error(channel);
 240         break;
 241     }
 242     return level;
 243 }
 244
 245 static uint32_t
 246 exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s)
 247 {
 248     uint32_t reg;
 249
 250     reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >>
 251             UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT;
 252
 253     return exynos4210_uart_FIFO_trigger_level(s->channel, reg);
 254 }
 255
 256 static uint32_t
 257 exynos4210_uart_Rx_FIFO_trigger_level(const Exynos4210UartState *s)
 258 {
 259     uint32_t reg;
 260
 261     reg = ((s->reg[I_(UFCON)] & UFCON_Rx_FIFO_TRIGGER_LEVEL) >>
 262             UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) + 1;
 263
 264     return exynos4210_uart_FIFO_trigger_level(s->channel, reg);
 265 }
 266
 267 /*
 268  * Update Rx DMA busy signal if Rx DMA is enabled. For simplicity,
 269  * mark DMA as busy if DMA is enabled and the receive buffer is empty.
 270  */
 271 static void exynos4210_uart_update_dmabusy(Exynos4210UartState *s)
 272 {
 273     bool rx_dma_enabled = (s->reg[I_(UCON)] & 0x03) == 0x02;
 274     uint32_t count = fifo_elements_number(&s->rx);
 275
 276     if (rx_dma_enabled && !count) {
 277         qemu_irq_raise(s->dmairq);
 278         trace_exynos_uart_dmabusy(s->channel);
 279     } else {
 280         qemu_irq_lower(s->dmairq);
 281         trace_exynos_uart_dmaready(s->channel);
 282     }
 283 }
 284
 285 static void exynos4210_uart_update_irq(Exynos4210UartState *s)
 286 {
 287     /*
 288      * The Tx interrupt is always requested if the number of data in the
 289      * transmit FIFO is smaller than the trigger level.
 290      */
 291     if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
 292         uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >>
 293                 UFSTAT_Tx_FIFO_COUNT_SHIFT;
 294
 295         if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) {
 296             s->reg[I_(UINTSP)] |= UINTSP_TXD;
 297         }
 298
 299         /*
 300          * Rx interrupt if trigger level is reached or if rx timeout
 301          * interrupt is disabled and there is data in the receive buffer
 302          */
 303         count = fifo_elements_number(&s->rx);
 304         if ((count && !(s->reg[I_(UCON)] & 0x80)) ||
 305             count >= exynos4210_uart_Rx_FIFO_trigger_level(s)) {
 306             exynos4210_uart_update_dmabusy(s);
 307             s->reg[I_(UINTSP)] |= UINTSP_RXD;
 308             timer_del(s->fifo_timeout_timer);
 309         }
 310     } else if (s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY) {
 311         exynos4210_uart_update_dmabusy(s);
 312         s->reg[I_(UINTSP)] |= UINTSP_RXD;
 313     }
 314
 315     s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)];
 316
 317     if (s->reg[I_(UINTP)]) {
 318         qemu_irq_raise(s->irq);
 319         trace_exynos_uart_irq_raised(s->channel, s->reg[I_(UINTP)]);
 320     } else {
 321         qemu_irq_lower(s->irq);
 322         trace_exynos_uart_irq_lowered(s->channel);
 323     }
 324 }
 325
 326 static void exynos4210_uart_timeout_int(void *opaque)
 327 {
 328     Exynos4210UartState *s = opaque;
 329
 330     trace_exynos_uart_rx_timeout(s->channel, s->reg[I_(UTRSTAT)],
 331                                  s->reg[I_(UINTSP)]);
 332
 333     if ((s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY) ||
 334         (s->reg[I_(UCON)] & (1 << 11))) {
 335         s->reg[I_(UINTSP)] |= UINTSP_RXD;
 336         s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_TIMEOUT;
 337         exynos4210_uart_update_dmabusy(s);
 338         exynos4210_uart_update_irq(s);
 339     }
 340 }
 341
 342 static void exynos4210_uart_update_parameters(Exynos4210UartState *s)
 343 {
 344     int speed, parity, data_bits, stop_bits;
 345     QEMUSerialSetParams ssp;
 346     uint64_t uclk_rate;
 347
 348     if (s->reg[I_(UBRDIV)] == 0) {
 349         return;
 350     }
 351
 352     if (s->reg[I_(ULCON)] & 0x20) {
 353         if (s->reg[I_(ULCON)] & 0x28) {
 354             parity = 'E';
 355         } else {
 356             parity = 'O';
 357         }
 358     } else {
 359         parity = 'N';
 360     }
 361
 362     if (s->reg[I_(ULCON)] & 0x4) {
 363         stop_bits = 2;
 364     } else {
 365         stop_bits = 1;
 366     }
 367
 368     data_bits = (s->reg[I_(ULCON)] & 0x3) + 5;
 369
 370     uclk_rate = 24000000;
 371
 372     speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) +
 373             (s->reg[I_(UFRACVAL)] & 0x7) + 16);
 374
 375     ssp.speed     = speed;
 376     ssp.parity    = parity;
 377     ssp.data_bits = data_bits;
 378     ssp.stop_bits = stop_bits;
 379
 380     s->wordtime = NANOSECONDS_PER_SECOND * (data_bits + stop_bits + 1) / speed;
 381
 382     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 383
 384     trace_exynos_uart_update_params(
 385                 s->channel, speed, parity, data_bits, stop_bits, s->wordtime);
 386 }
 387
 388 static void exynos4210_uart_rx_timeout_set(Exynos4210UartState *s)
 389 {
 390     if (s->reg[I_(UCON)] & 0x80) {
 391         uint32_t timeout = ((s->reg[I_(UCON)] >> 12) & 0x0f) * s->wordtime;
 392
 393         timer_mod(s->fifo_timeout_timer,
 394                   qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout);
 395     } else {
 396         timer_del(s->fifo_timeout_timer);
 397     }
 398 }
 399
 400 static void exynos4210_uart_write(void *opaque, hwaddr offset,
 401                                uint64_t val, unsigned size)
 402 {
 403     Exynos4210UartState *s = (Exynos4210UartState *)opaque;
 404     uint8_t ch;
 405
 406     trace_exynos_uart_write(s->channel, offset,
 407                             exynos4210_uart_regname(offset), val);
 408
 409     switch (offset) {
 410     case ULCON:
 411     case UBRDIV:
 412     case UFRACVAL:
 413         s->reg[I_(offset)] = val;
 414         exynos4210_uart_update_parameters(s);
 415         break;
 416     case UFCON:
 417         s->reg[I_(UFCON)] = val;
 418         if (val & UFCON_Rx_FIFO_RESET) {
 419             fifo_reset(&s->rx);
 420             s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET;
 421             trace_exynos_uart_rx_fifo_reset(s->channel);
 422         }
 423         if (val & UFCON_Tx_FIFO_RESET) {
 424             fifo_reset(&s->tx);
 425             s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET;
 426             trace_exynos_uart_tx_fifo_reset(s->channel);
 427         }
 428         break;
 429
 430     case UTXH:
 431         if (qemu_chr_fe_backend_connected(&s->chr)) {
 432             s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY |
 433                     UTRSTAT_Tx_BUFFER_EMPTY);
 434             ch = (uint8_t)val;
 435             /* XXX this blocks entire thread. Rewrite to use
 436              * qemu_chr_fe_write and background I/O callbacks */
 437             qemu_chr_fe_write_all(&s->chr, &ch, 1);
 438             trace_exynos_uart_tx(s->channel, ch);
 439             s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY |
 440                     UTRSTAT_Tx_BUFFER_EMPTY;
 441             s->reg[I_(UINTSP)]  |= UINTSP_TXD;
 442             exynos4210_uart_update_irq(s);
 443         }
 444         break;
 445
 446     case UINTP:
 447         s->reg[I_(UINTP)] &= ~val;
 448         s->reg[I_(UINTSP)] &= ~val;
 449         trace_exynos_uart_intclr(s->channel, s->reg[I_(UINTP)]);
 450         exynos4210_uart_update_irq(s);
 451         break;
 452     case UTRSTAT:
 453         if (val & UTRSTAT_Rx_TIMEOUT) {
 454             s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_TIMEOUT;
 455         }
 456         break;
 457     case UERSTAT:
 458     case UFSTAT:
 459     case UMSTAT:
 460     case URXH:
 461         trace_exynos_uart_ro_write(
 462                     s->channel, exynos4210_uart_regname(offset), offset);
 463         break;
 464     case UINTSP:
 465         s->reg[I_(UINTSP)]  &= ~val;
 466         break;
 467     case UINTM:
 468         s->reg[I_(UINTM)] = val;
 469         exynos4210_uart_update_irq(s);
 470         break;
 471     case UCON:
 472     case UMCON:
 473     default:
 474         s->reg[I_(offset)] = val;
 475         break;
 476     }
 477 }
 478
 479 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset,
 480                                   unsigned size)
 481 {
 482     Exynos4210UartState *s = (Exynos4210UartState *)opaque;
 483     uint32_t res;
 484
 485     switch (offset) {
 486     case UERSTAT: /* Read Only */
 487         res = s->reg[I_(UERSTAT)];
 488         s->reg[I_(UERSTAT)] = 0;
 489         trace_exynos_uart_read(s->channel, offset,
 490                                exynos4210_uart_regname(offset), res);
 491         return res;
 492     case UFSTAT: /* Read Only */
 493         s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff;
 494         if (fifo_empty_elements_number(&s->rx) == 0) {
 495             s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL;
 496             s->reg[I_(UFSTAT)] &= ~0xff;
 497         }
 498         trace_exynos_uart_read(s->channel, offset,
 499                                exynos4210_uart_regname(offset),
 500                                s->reg[I_(UFSTAT)]);
 501         return s->reg[I_(UFSTAT)];
 502     case URXH:
 503         if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
 504             if (fifo_elements_number(&s->rx)) {
 505                 res = fifo_retrieve(&s->rx);
 506                 trace_exynos_uart_rx(s->channel, res);
 507                 if (!fifo_elements_number(&s->rx)) {
 508                     s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
 509                 } else {
 510                     s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
 511                 }
 512             } else {
 513                 trace_exynos_uart_rx_error(s->channel);
 514                 s->reg[I_(UINTSP)] |= UINTSP_ERROR;
 515                 exynos4210_uart_update_irq(s);
 516                 res = 0;
 517             }
 518         } else {
 519             s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
 520             res = s->reg[I_(URXH)];
 521         }
 522         qemu_chr_fe_accept_input(&s->chr);
 523         exynos4210_uart_update_dmabusy(s);
 524         trace_exynos_uart_read(s->channel, offset,
 525                                exynos4210_uart_regname(offset), res);
 526         return res;
 527     case UTXH:
 528         trace_exynos_uart_wo_read(s->channel, exynos4210_uart_regname(offset),
 529                                   offset);
 530         break;
 531     default:
 532         trace_exynos_uart_read(s->channel, offset,
 533                                exynos4210_uart_regname(offset),
 534                                s->reg[I_(offset)]);
 535         return s->reg[I_(offset)];
 536     }
 537
 538     trace_exynos_uart_read(s->channel, offset, exynos4210_uart_regname(offset),
 539                            0);
 540     return 0;
 541 }
 542
 543 static const MemoryRegionOps exynos4210_uart_ops = {
 544     .read = exynos4210_uart_read,
 545     .write = exynos4210_uart_write,
 546     .endianness = DEVICE_NATIVE_ENDIAN,
 547     .valid = {
 548         .max_access_size = 4,
 549         .unaligned = false
 550     },
 551 };
 552
 553 static int exynos4210_uart_can_receive(void *opaque)
 554 {
 555     Exynos4210UartState *s = (Exynos4210UartState *)opaque;
 556
 557     if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
 558         return fifo_empty_elements_number(&s->rx);
 559     } else {
 560         return !(s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY);
 561     }
 562 }
 563
 564 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size)
 565 {
 566     Exynos4210UartState *s = (Exynos4210UartState *)opaque;
 567     int i;
 568
 569     if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
 570         if (fifo_empty_elements_number(&s->rx) < size) {
 571             size = fifo_empty_elements_number(&s->rx);
 572             s->reg[I_(UINTSP)] |= UINTSP_ERROR;
 573         }
 574         for (i = 0; i < size; i++) {
 575             fifo_store(&s->rx, buf[i]);
 576         }
 577         exynos4210_uart_rx_timeout_set(s);
 578     } else {
 579         s->reg[I_(URXH)] = buf[0];
 580     }
 581     s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
 582
 583     exynos4210_uart_update_irq(s);
 584 }
 585
 586
 587 static void exynos4210_uart_event(void *opaque, QEMUChrEvent event)
 588 {
 589     Exynos4210UartState *s = (Exynos4210UartState *)opaque;
 590
 591     if (event == CHR_EVENT_BREAK) {
 592         /* When the RxDn is held in logic 0, then a null byte is pushed into the
 593          * fifo */
 594         fifo_store(&s->rx, '\0');
 595         s->reg[I_(UERSTAT)] |= UERSTAT_BREAK;
 596         exynos4210_uart_update_irq(s);
 597     }
 598 }
 599
 600
 601 static void exynos4210_uart_reset(DeviceState *dev)
 602 {
 603     Exynos4210UartState *s = EXYNOS4210_UART(dev);
 604     int i;
 605
 606     for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
 607         s->reg[I_(exynos4210_uart_regs[i].offset)] =
 608                 exynos4210_uart_regs[i].reset_value;
 609     }
 610
 611     fifo_reset(&s->rx);
 612     fifo_reset(&s->tx);
 613
 614     trace_exynos_uart_rxsize(s->channel, s->rx.size);
 615 }
 616
 617 static int exynos4210_uart_post_load(void *opaque, int version_id)
 618 {
 619     Exynos4210UartState *s = (Exynos4210UartState *)opaque;
 620
 621     exynos4210_uart_update_parameters(s);
 622     exynos4210_uart_rx_timeout_set(s);
 623
 624     return 0;
 625 }
 626
 627 static const VMStateDescription vmstate_exynos4210_uart_fifo = {
 628     .name = "exynos4210.uart.fifo",
 629     .version_id = 1,
 630     .minimum_version_id = 1,
 631     .fields = (VMStateField[]) {
 632         VMSTATE_UINT32(sp, Exynos4210UartFIFO),
 633         VMSTATE_UINT32(rp, Exynos4210UartFIFO),
 634         VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size),
 635         VMSTATE_END_OF_LIST()
 636     }
 637 };
 638
 639 static const VMStateDescription vmstate_exynos4210_uart = {
 640     .name = "exynos4210.uart",
 641     .version_id = 1,
 642     .minimum_version_id = 1,
 643     .post_load = exynos4210_uart_post_load,
 644     .fields = (VMStateField[]) {
 645         VMSTATE_STRUCT(rx, Exynos4210UartState, 1,
 646                        vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO),
 647         VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState,
 648                              EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)),
 649         VMSTATE_END_OF_LIST()
 650     }
 651 };
 652
 653 DeviceState *exynos4210_uart_create(hwaddr addr,
 654                                     int fifo_size,
 655                                     int channel,
 656                                     Chardev *chr,
 657                                     qemu_irq irq)
 658 {
 659     DeviceState  *dev;
 660     SysBusDevice *bus;
 661
 662     dev = qdev_new(TYPE_EXYNOS4210_UART);
 663
 664     qdev_prop_set_chr(dev, "chardev", chr);
 665     qdev_prop_set_uint32(dev, "channel", channel);
 666     qdev_prop_set_uint32(dev, "rx-size", fifo_size);
 667     qdev_prop_set_uint32(dev, "tx-size", fifo_size);
 668
 669     bus = SYS_BUS_DEVICE(dev);
 670     sysbus_realize_and_unref(bus, &error_fatal);
 671     if (addr != (hwaddr)-1) {
 672         sysbus_mmio_map(bus, 0, addr);
 673     }
 674     sysbus_connect_irq(bus, 0, irq);
 675
 676     return dev;
 677 }
 678
 679 static void exynos4210_uart_init(Object *obj)
 680 {
 681     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
 682     Exynos4210UartState *s = EXYNOS4210_UART(dev);
 683
 684     s->wordtime = NANOSECONDS_PER_SECOND * 10 / 9600;
 685
 686     /* memory mapping */
 687     memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s,
 688                           "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE);
 689     sysbus_init_mmio(dev, &s->iomem);
 690
 691     sysbus_init_irq(dev, &s->irq);
 692     sysbus_init_irq(dev, &s->dmairq);
 693 }
 694
 695 static void exynos4210_uart_realize(DeviceState *dev, Error **errp)
 696 {
 697     Exynos4210UartState *s = EXYNOS4210_UART(dev);
 698
 699     s->fifo_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
 700                                          exynos4210_uart_timeout_int, s);
 701
 702     qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive,
 703                              exynos4210_uart_receive, exynos4210_uart_event,
 704                              NULL, s, NULL, true);
 705 }
 706
 707 static Property exynos4210_uart_properties[] = {
 708     DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr),
 709     DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0),
 710     DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16),
 711     DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16),
 712     DEFINE_PROP_END_OF_LIST(),
 713 };
 714
 715 static void exynos4210_uart_class_init(ObjectClass *klass, void *data)
 716 {
 717     DeviceClass *dc = DEVICE_CLASS(klass);
 718
 719     dc->realize = exynos4210_uart_realize;
 720     dc->reset = exynos4210_uart_reset;
 721     device_class_set_props(dc, exynos4210_uart_properties);
 722     dc->vmsd = &vmstate_exynos4210_uart;
 723 }
 724
 725 static const TypeInfo exynos4210_uart_info = {
 726     .name          = TYPE_EXYNOS4210_UART,
 727     .parent        = TYPE_SYS_BUS_DEVICE,
 728     .instance_size = sizeof(Exynos4210UartState),
 729     .instance_init = exynos4210_uart_init,
 730     .class_init    = exynos4210_uart_class_init,
 731 };
 732
 733 static void exynos4210_uart_register(void)
 734 {
 735     type_register_static(&exynos4210_uart_info);
 736 }
 737
 738 type_init(exynos4210_uart_register)