hw/pci-host/designware.c

   1 /*
   2  * Copyright (c) 2018, Impinj, Inc.
   3  *
   4  * Designware PCIe IP block emulation
   5  *
   6  * This library is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU Lesser General Public
   8  * License as published by the Free Software Foundation; either
   9  * version 2 of the License, or (at your option) any later version.
  10  *
  11  * This library is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  * Lesser General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU Lesser General Public
  17  * License along with this library; if not, see
  18  * <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "qemu/osdep.h"
  22 #include "qapi/error.h"
  23 #include "qemu/module.h"
  24 #include "hw/pci/msi.h"
  25 #include "hw/pci/pci_bridge.h"
  26 #include "hw/pci/pci_host.h"
  27 #include "hw/pci/pcie_port.h"
  28 #include "hw/qdev-properties.h"
  29 #include "migration/vmstate.h"
  30 #include "hw/irq.h"
  31 #include "hw/pci-host/designware.h"
  32
  33 #define DESIGNWARE_PCIE_PORT_LINK_CONTROL          0x710
  34 #define DESIGNWARE_PCIE_PHY_DEBUG_R1               0x72C
  35 #define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP  BIT(4)
  36 #define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL   0x80C
  37 #define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE    BIT(17)
  38 #define DESIGNWARE_PCIE_MSI_ADDR_LO                0x820
  39 #define DESIGNWARE_PCIE_MSI_ADDR_HI                0x824
  40 #define DESIGNWARE_PCIE_MSI_INTR0_ENABLE           0x828
  41 #define DESIGNWARE_PCIE_MSI_INTR0_MASK             0x82C
  42 #define DESIGNWARE_PCIE_MSI_INTR0_STATUS           0x830
  43 #define DESIGNWARE_PCIE_ATU_VIEWPORT               0x900
  44 #define DESIGNWARE_PCIE_ATU_REGION_INBOUND         BIT(31)
  45 #define DESIGNWARE_PCIE_ATU_CR1                    0x904
  46 #define DESIGNWARE_PCIE_ATU_TYPE_MEM               (0x0 << 0)
  47 #define DESIGNWARE_PCIE_ATU_CR2                    0x908
  48 #define DESIGNWARE_PCIE_ATU_ENABLE                 BIT(31)
  49 #define DESIGNWARE_PCIE_ATU_LOWER_BASE             0x90C
  50 #define DESIGNWARE_PCIE_ATU_UPPER_BASE             0x910
  51 #define DESIGNWARE_PCIE_ATU_LIMIT                  0x914
  52 #define DESIGNWARE_PCIE_ATU_LOWER_TARGET           0x918
  53 #define DESIGNWARE_PCIE_ATU_BUS(x)                 (((x) >> 24) & 0xff)
  54 #define DESIGNWARE_PCIE_ATU_DEVFN(x)               (((x) >> 16) & 0xff)
  55 #define DESIGNWARE_PCIE_ATU_UPPER_TARGET           0x91C
  56
  57 #define DESIGNWARE_PCIE_IRQ_MSI                    3
  58
  59 static DesignwarePCIEHost *
  60 designware_pcie_root_to_host(DesignwarePCIERoot *root)
  61 {
  62     BusState *bus = qdev_get_parent_bus(DEVICE(root));
  63     return DESIGNWARE_PCIE_HOST(bus->parent);
  64 }
  65
  66 static void designware_pcie_root_msi_write(void *opaque, hwaddr addr,
  67                                            uint64_t val, unsigned len)
  68 {
  69     DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque);
  70     DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
  71
  72     root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable;
  73
  74     if (root->msi.intr[0].status & ~root->msi.intr[0].mask) {
  75         qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1);
  76     }
  77 }
  78
  79 static const MemoryRegionOps designware_pci_host_msi_ops = {
  80     .write = designware_pcie_root_msi_write,
  81     .endianness = DEVICE_LITTLE_ENDIAN,
  82     .valid = {
  83         .min_access_size = 4,
  84         .max_access_size = 4,
  85     },
  86 };
  87
  88 static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root)
  89
  90 {
  91     MemoryRegion *mem   = &root->msi.iomem;
  92     const uint64_t base = root->msi.base;
  93     const bool enable   = root->msi.intr[0].enable;
  94
  95     memory_region_set_address(mem, base);
  96     memory_region_set_enabled(mem, enable);
  97 }
  98
  99 static DesignwarePCIEViewport *
 100 designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root)
 101 {
 102     const unsigned int idx = root->atu_viewport & 0xF;
 103     const unsigned int dir =
 104         !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND);
 105     return &root->viewports[dir][idx];
 106 }
 107
 108 static uint32_t
 109 designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len)
 110 {
 111     DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
 112     DesignwarePCIEViewport *viewport =
 113         designware_pcie_root_get_current_viewport(root);
 114
 115     uint32_t val;
 116
 117     switch (address) {
 118     case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
 119         /*
 120          * Linux guest uses this register only to configure number of
 121          * PCIE lane (which in our case is irrelevant) and doesn't
 122          * really care about the value it reads from this register
 123          */
 124         val = 0xDEADBEEF;
 125         break;
 126
 127     case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
 128         /*
 129          * To make sure that any code in guest waiting for speed
 130          * change does not time out we always report
 131          * PORT_LOGIC_SPEED_CHANGE as set
 132          */
 133         val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE;
 134         break;
 135
 136     case DESIGNWARE_PCIE_MSI_ADDR_LO:
 137         val = root->msi.base;
 138         break;
 139
 140     case DESIGNWARE_PCIE_MSI_ADDR_HI:
 141         val = root->msi.base >> 32;
 142         break;
 143
 144     case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
 145         val = root->msi.intr[0].enable;
 146         break;
 147
 148     case DESIGNWARE_PCIE_MSI_INTR0_MASK:
 149         val = root->msi.intr[0].mask;
 150         break;
 151
 152     case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
 153         val = root->msi.intr[0].status;
 154         break;
 155
 156     case DESIGNWARE_PCIE_PHY_DEBUG_R1:
 157         val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
 158         break;
 159
 160     case DESIGNWARE_PCIE_ATU_VIEWPORT:
 161         val = root->atu_viewport;
 162         break;
 163
 164     case DESIGNWARE_PCIE_ATU_LOWER_BASE:
 165         val = viewport->base;
 166         break;
 167
 168     case DESIGNWARE_PCIE_ATU_UPPER_BASE:
 169         val = viewport->base >> 32;
 170         break;
 171
 172     case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
 173         val = viewport->target;
 174         break;
 175
 176     case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
 177         val = viewport->target >> 32;
 178         break;
 179
 180     case DESIGNWARE_PCIE_ATU_LIMIT:
 181         val = viewport->limit;
 182         break;
 183
 184     case DESIGNWARE_PCIE_ATU_CR1:
 185     case DESIGNWARE_PCIE_ATU_CR2:
 186         val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) /
 187                            sizeof(uint32_t)];
 188         break;
 189
 190     default:
 191         val = pci_default_read_config(d, address, len);
 192         break;
 193     }
 194
 195     return val;
 196 }
 197
 198 static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr,
 199                                                  uint64_t *val, unsigned len)
 200 {
 201     DesignwarePCIEViewport *viewport = opaque;
 202     DesignwarePCIERoot *root = viewport->root;
 203
 204     const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target);
 205     const uint8_t devfn  = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target);
 206     PCIBus    *pcibus    = pci_get_bus(PCI_DEVICE(root));
 207     PCIDevice *pcidev    = pci_find_device(pcibus, busnum, devfn);
 208
 209     if (pcidev) {
 210         addr &= pci_config_size(pcidev) - 1;
 211
 212         if (val) {
 213             pci_host_config_write_common(pcidev, addr,
 214                                          pci_config_size(pcidev),
 215                                          *val, len);
 216         } else {
 217             return pci_host_config_read_common(pcidev, addr,
 218                                                pci_config_size(pcidev),
 219                                                len);
 220         }
 221     }
 222
 223     return UINT64_MAX;
 224 }
 225
 226 static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr,
 227                                                unsigned len)
 228 {
 229     return designware_pcie_root_data_access(opaque, addr, NULL, len);
 230 }
 231
 232 static void designware_pcie_root_data_write(void *opaque, hwaddr addr,
 233                                             uint64_t val, unsigned len)
 234 {
 235     designware_pcie_root_data_access(opaque, addr, &val, len);
 236 }
 237
 238 static const MemoryRegionOps designware_pci_host_conf_ops = {
 239     .read = designware_pcie_root_data_read,
 240     .write = designware_pcie_root_data_write,
 241     .endianness = DEVICE_LITTLE_ENDIAN,
 242     .valid = {
 243         .min_access_size = 1,
 244         .max_access_size = 4,
 245     },
 246 };
 247
 248 static void designware_pcie_update_viewport(DesignwarePCIERoot *root,
 249                                             DesignwarePCIEViewport *viewport)
 250 {
 251     const uint64_t target = viewport->target;
 252     const uint64_t base   = viewport->base;
 253     const uint64_t size   = (uint64_t)viewport->limit - base + 1;
 254     const bool enabled    = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE;
 255
 256     MemoryRegion *current, *other;
 257
 258     if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) {
 259         current = &viewport->mem;
 260         other   = &viewport->cfg;
 261         memory_region_set_alias_offset(current, target);
 262     } else {
 263         current = &viewport->cfg;
 264         other   = &viewport->mem;
 265     }
 266
 267     /*
 268      * An outbound viewport can be reconfigure from being MEM to CFG,
 269      * to account for that we disable the "other" memory region that
 270      * becomes unused due to that fact.
 271      */
 272     memory_region_set_enabled(other, false);
 273     if (enabled) {
 274         memory_region_set_size(current, size);
 275         memory_region_set_address(current, base);
 276     }
 277     memory_region_set_enabled(current, enabled);
 278 }
 279
 280 static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address,
 281                                               uint32_t val, int len)
 282 {
 283     DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
 284     DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
 285     DesignwarePCIEViewport *viewport =
 286         designware_pcie_root_get_current_viewport(root);
 287
 288     switch (address) {
 289     case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
 290     case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
 291     case DESIGNWARE_PCIE_PHY_DEBUG_R1:
 292         /* No-op */
 293         break;
 294
 295     case DESIGNWARE_PCIE_MSI_ADDR_LO:
 296         root->msi.base &= 0xFFFFFFFF00000000ULL;
 297         root->msi.base |= val;
 298         designware_pcie_root_update_msi_mapping(root);
 299         break;
 300
 301     case DESIGNWARE_PCIE_MSI_ADDR_HI:
 302         root->msi.base &= 0x00000000FFFFFFFFULL;
 303         root->msi.base |= (uint64_t)val << 32;
 304         designware_pcie_root_update_msi_mapping(root);
 305         break;
 306
 307     case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
 308         root->msi.intr[0].enable = val;
 309         designware_pcie_root_update_msi_mapping(root);
 310         break;
 311
 312     case DESIGNWARE_PCIE_MSI_INTR0_MASK:
 313         root->msi.intr[0].mask = val;
 314         break;
 315
 316     case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
 317         root->msi.intr[0].status ^= val;
 318         if (!root->msi.intr[0].status) {
 319             qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0);
 320         }
 321         break;
 322
 323     case DESIGNWARE_PCIE_ATU_VIEWPORT:
 324         root->atu_viewport = val;
 325         break;
 326
 327     case DESIGNWARE_PCIE_ATU_LOWER_BASE:
 328         viewport->base &= 0xFFFFFFFF00000000ULL;
 329         viewport->base |= val;
 330         break;
 331
 332     case DESIGNWARE_PCIE_ATU_UPPER_BASE:
 333         viewport->base &= 0x00000000FFFFFFFFULL;
 334         viewport->base |= (uint64_t)val << 32;
 335         break;
 336
 337     case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
 338         viewport->target &= 0xFFFFFFFF00000000ULL;
 339         viewport->target |= val;
 340         break;
 341
 342     case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
 343         viewport->target &= 0x00000000FFFFFFFFULL;
 344         viewport->target |= val;
 345         break;
 346
 347     case DESIGNWARE_PCIE_ATU_LIMIT:
 348         viewport->limit = val;
 349         break;
 350
 351     case DESIGNWARE_PCIE_ATU_CR1:
 352         viewport->cr[0] = val;
 353         break;
 354     case DESIGNWARE_PCIE_ATU_CR2:
 355         viewport->cr[1] = val;
 356         designware_pcie_update_viewport(root, viewport);
 357         break;
 358
 359     default:
 360         pci_bridge_write_config(d, address, val, len);
 361         break;
 362     }
 363 }
 364
 365 static char *designware_pcie_viewport_name(const char *direction,
 366                                            unsigned int i,
 367                                            const char *type)
 368 {
 369     return g_strdup_printf("PCI %s Viewport %u [%s]",
 370                            direction, i, type);
 371 }
 372
 373 static void designware_pcie_root_realize(PCIDevice *dev, Error **errp)
 374 {
 375     DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev);
 376     DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
 377     MemoryRegion *address_space = &host->pci.memory;
 378     PCIBridge *br = PCI_BRIDGE(dev);
 379     DesignwarePCIEViewport *viewport;
 380     /*
 381      * Dummy values used for initial configuration of MemoryRegions
 382      * that belong to a given viewport
 383      */
 384     const hwaddr dummy_offset = 0;
 385     const uint64_t dummy_size = 4;
 386     size_t i;
 387
 388     br->bus_name  = "dw-pcie";
 389
 390     pci_set_word(dev->config + PCI_COMMAND,
 391                  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 392
 393     pci_config_set_interrupt_pin(dev->config, 1);
 394     pci_bridge_initfn(dev, TYPE_PCIE_BUS);
 395
 396     pcie_port_init_reg(dev);
 397
 398     pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT,
 399                   0, &error_fatal);
 400
 401     msi_nonbroken = true;
 402     msi_init(dev, 0x50, 32, true, true, &error_fatal);
 403
 404     for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) {
 405         MemoryRegion *source, *destination, *mem;
 406         const char *direction;
 407         char *name;
 408
 409         viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i];
 410         viewport->inbound = true;
 411         viewport->base    = 0x0000000000000000ULL;
 412         viewport->target  = 0x0000000000000000ULL;
 413         viewport->limit   = UINT32_MAX;
 414         viewport->cr[0]   = DESIGNWARE_PCIE_ATU_TYPE_MEM;
 415
 416         source      = &host->pci.address_space_root;
 417         destination = get_system_memory();
 418         direction   = "Inbound";
 419
 420         /*
 421          * Configure MemoryRegion implementing PCI -> CPU memory
 422          * access
 423          */
 424         mem  = &viewport->mem;
 425         name = designware_pcie_viewport_name(direction, i, "MEM");
 426         memory_region_init_alias(mem, OBJECT(root), name, destination,
 427                                  dummy_offset, dummy_size);
 428         memory_region_add_subregion_overlap(source, dummy_offset, mem, -1);
 429         memory_region_set_enabled(mem, false);
 430         g_free(name);
 431
 432         viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i];
 433         viewport->root    = root;
 434         viewport->inbound = false;
 435         viewport->base    = 0x0000000000000000ULL;
 436         viewport->target  = 0x0000000000000000ULL;
 437         viewport->limit   = UINT32_MAX;
 438         viewport->cr[0]   = DESIGNWARE_PCIE_ATU_TYPE_MEM;
 439
 440         destination = &host->pci.memory;
 441         direction   = "Outbound";
 442         source      = get_system_memory();
 443
 444         /*
 445          * Configure MemoryRegion implementing CPU -> PCI memory
 446          * access
 447          */
 448         mem  = &viewport->mem;
 449         name = designware_pcie_viewport_name(direction, i, "MEM");
 450         memory_region_init_alias(mem, OBJECT(root), name, destination,
 451                                  dummy_offset, dummy_size);
 452         memory_region_add_subregion(source, dummy_offset, mem);
 453         memory_region_set_enabled(mem, false);
 454         g_free(name);
 455
 456         /*
 457          * Configure MemoryRegion implementing access to configuration
 458          * space
 459          */
 460         mem  = &viewport->cfg;
 461         name = designware_pcie_viewport_name(direction, i, "CFG");
 462         memory_region_init_io(&viewport->cfg, OBJECT(root),
 463                               &designware_pci_host_conf_ops,
 464                               viewport, name, dummy_size);
 465         memory_region_add_subregion(source, dummy_offset, mem);
 466         memory_region_set_enabled(mem, false);
 467         g_free(name);
 468     }
 469
 470     /*
 471      * If no inbound iATU windows are configured, HW defaults to
 472      * letting inbound TLPs to pass in. We emulate that by exlicitly
 473      * configuring first inbound window to cover all of target's
 474      * address space.
 475      *
 476      * NOTE: This will not work correctly for the case when first
 477      * configured inbound window is window 0
 478      */
 479     viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0];
 480     viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE;
 481     designware_pcie_update_viewport(root, viewport);
 482
 483     memory_region_init_io(&root->msi.iomem, OBJECT(root),
 484                           &designware_pci_host_msi_ops,
 485                           root, "pcie-msi", 0x4);
 486     /*
 487      * We initially place MSI interrupt I/O region a adress 0 and
 488      * disable it. It'll be later moved to correct offset and enabled
 489      * in designware_pcie_root_update_msi_mapping() as a part of
 490      * initialization done by guest OS
 491      */
 492     memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem);
 493     memory_region_set_enabled(&root->msi.iomem, false);
 494 }
 495
 496 static void designware_pcie_set_irq(void *opaque, int irq_num, int level)
 497 {
 498     DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque);
 499
 500     qemu_set_irq(host->pci.irqs[irq_num], level);
 501 }
 502
 503 static const char *
 504 designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus)
 505 {
 506     return "0000:00";
 507 }
 508
 509 static const VMStateDescription vmstate_designware_pcie_msi_bank = {
 510     .name = "designware-pcie-msi-bank",
 511     .version_id = 1,
 512     .minimum_version_id = 1,
 513     .fields = (VMStateField[]) {
 514         VMSTATE_UINT32(enable, DesignwarePCIEMSIBank),
 515         VMSTATE_UINT32(mask, DesignwarePCIEMSIBank),
 516         VMSTATE_UINT32(status, DesignwarePCIEMSIBank),
 517         VMSTATE_END_OF_LIST()
 518     }
 519 };
 520
 521 static const VMStateDescription vmstate_designware_pcie_msi = {
 522     .name = "designware-pcie-msi",
 523     .version_id = 1,
 524     .minimum_version_id = 1,
 525     .fields = (VMStateField[]) {
 526         VMSTATE_UINT64(base, DesignwarePCIEMSI),
 527         VMSTATE_STRUCT_ARRAY(intr,
 528                              DesignwarePCIEMSI,
 529                              DESIGNWARE_PCIE_NUM_MSI_BANKS,
 530                              1,
 531                              vmstate_designware_pcie_msi_bank,
 532                              DesignwarePCIEMSIBank),
 533         VMSTATE_END_OF_LIST()
 534     }
 535 };
 536
 537 static const VMStateDescription vmstate_designware_pcie_viewport = {
 538     .name = "designware-pcie-viewport",
 539     .version_id = 1,
 540     .minimum_version_id = 1,
 541     .fields = (VMStateField[]) {
 542         VMSTATE_UINT64(base, DesignwarePCIEViewport),
 543         VMSTATE_UINT64(target, DesignwarePCIEViewport),
 544         VMSTATE_UINT32(limit, DesignwarePCIEViewport),
 545         VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2),
 546         VMSTATE_END_OF_LIST()
 547     }
 548 };
 549
 550 static const VMStateDescription vmstate_designware_pcie_root = {
 551     .name = "designware-pcie-root",
 552     .version_id = 1,
 553     .minimum_version_id = 1,
 554     .fields = (VMStateField[]) {
 555         VMSTATE_PCI_DEVICE(parent_obj, PCIBridge),
 556         VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot),
 557         VMSTATE_STRUCT_2DARRAY(viewports,
 558                                DesignwarePCIERoot,
 559                                2,
 560                                DESIGNWARE_PCIE_NUM_VIEWPORTS,
 561                                1,
 562                                vmstate_designware_pcie_viewport,
 563                                DesignwarePCIEViewport),
 564         VMSTATE_STRUCT(msi,
 565                        DesignwarePCIERoot,
 566                        1,
 567                        vmstate_designware_pcie_msi,
 568                        DesignwarePCIEMSI),
 569         VMSTATE_END_OF_LIST()
 570     }
 571 };
 572
 573 static void designware_pcie_root_class_init(ObjectClass *klass, void *data)
 574 {
 575     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 576     DeviceClass *dc = DEVICE_CLASS(klass);
 577
 578     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
 579
 580     k->vendor_id = PCI_VENDOR_ID_SYNOPSYS;
 581     k->device_id = 0xABCD;
 582     k->revision = 0;
 583     k->class_id = PCI_CLASS_BRIDGE_PCI;
 584     k->is_bridge = true;
 585     k->exit = pci_bridge_exitfn;
 586     k->realize = designware_pcie_root_realize;
 587     k->config_read = designware_pcie_root_config_read;
 588     k->config_write = designware_pcie_root_config_write;
 589
 590     dc->reset = pci_bridge_reset;
 591     /*
 592      * PCI-facing part of the host bridge, not usable without the
 593      * host-facing part, which can't be device_add'ed, yet.
 594      */
 595     dc->user_creatable = false;
 596     dc->vmsd = &vmstate_designware_pcie_root;
 597 }
 598
 599 static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr,
 600                                                unsigned int size)
 601 {
 602     PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
 603     PCIDevice *device = pci_find_device(pci->bus, 0, 0);
 604
 605     return pci_host_config_read_common(device,
 606                                        addr,
 607                                        pci_config_size(device),
 608                                        size);
 609 }
 610
 611 static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr,
 612                                             uint64_t val, unsigned int size)
 613 {
 614     PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
 615     PCIDevice *device = pci_find_device(pci->bus, 0, 0);
 616
 617     return pci_host_config_write_common(device,
 618                                         addr,
 619                                         pci_config_size(device),
 620                                         val, size);
 621 }
 622
 623 static const MemoryRegionOps designware_pci_mmio_ops = {
 624     .read       = designware_pcie_host_mmio_read,
 625     .write      = designware_pcie_host_mmio_write,
 626     .endianness = DEVICE_LITTLE_ENDIAN,
 627     .impl = {
 628         /*
 629          * Our device would not work correctly if the guest was doing
 630          * unaligned access. This might not be a limitation on the real
 631          * device but in practice there is no reason for a guest to access
 632          * this device unaligned.
 633          */
 634         .min_access_size = 4,
 635         .max_access_size = 4,
 636         .unaligned = false,
 637     },
 638 };
 639
 640 static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque,
 641                                                     int devfn)
 642 {
 643     DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque);
 644
 645     return &s->pci.address_space;
 646 }
 647
 648 static void designware_pcie_host_realize(DeviceState *dev, Error **errp)
 649 {
 650     PCIHostState *pci = PCI_HOST_BRIDGE(dev);
 651     DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev);
 652     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 653     size_t i;
 654
 655     for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) {
 656         sysbus_init_irq(sbd, &s->pci.irqs[i]);
 657     }
 658
 659     memory_region_init_io(&s->mmio,
 660                           OBJECT(s),
 661                           &designware_pci_mmio_ops,
 662                           s,
 663                           "pcie.reg", 4 * 1024);
 664     sysbus_init_mmio(sbd, &s->mmio);
 665
 666     memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16);
 667     memory_region_init(&s->pci.memory, OBJECT(s),
 668                        "pcie-bus-memory",
 669                        UINT64_MAX);
 670
 671     pci->bus = pci_register_root_bus(dev, "pcie",
 672                                      designware_pcie_set_irq,
 673                                      pci_swizzle_map_irq_fn,
 674                                      s,
 675                                      &s->pci.memory,
 676                                      &s->pci.io,
 677                                      0, 4,
 678                                      TYPE_PCIE_BUS);
 679
 680     memory_region_init(&s->pci.address_space_root,
 681                        OBJECT(s),
 682                        "pcie-bus-address-space-root",
 683                        UINT64_MAX);
 684     memory_region_add_subregion(&s->pci.address_space_root,
 685                                 0x0, &s->pci.memory);
 686     address_space_init(&s->pci.address_space,
 687                        &s->pci.address_space_root,
 688                        "pcie-bus-address-space");
 689     pci_setup_iommu(pci->bus, designware_pcie_host_set_iommu, s);
 690
 691     qdev_realize(DEVICE(&s->root), BUS(pci->bus), &error_fatal);
 692 }
 693
 694 static const VMStateDescription vmstate_designware_pcie_host = {
 695     .name = "designware-pcie-host",
 696     .version_id = 1,
 697     .minimum_version_id = 1,
 698     .fields = (VMStateField[]) {
 699         VMSTATE_STRUCT(root,
 700                        DesignwarePCIEHost,
 701                        1,
 702                        vmstate_designware_pcie_root,
 703                        DesignwarePCIERoot),
 704         VMSTATE_END_OF_LIST()
 705     }
 706 };
 707
 708 static void designware_pcie_host_class_init(ObjectClass *klass, void *data)
 709 {
 710     DeviceClass *dc = DEVICE_CLASS(klass);
 711     PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
 712
 713     hc->root_bus_path = designware_pcie_host_root_bus_path;
 714     dc->realize = designware_pcie_host_realize;
 715     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
 716     dc->fw_name = "pci";
 717     dc->vmsd = &vmstate_designware_pcie_host;
 718 }
 719
 720 static void designware_pcie_host_init(Object *obj)
 721 {
 722     DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj);
 723     DesignwarePCIERoot *root = &s->root;
 724
 725     object_initialize_child(obj, "root", root, TYPE_DESIGNWARE_PCIE_ROOT);
 726     qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
 727     qdev_prop_set_bit(DEVICE(root), "multifunction", false);
 728 }
 729
 730 static const TypeInfo designware_pcie_root_info = {
 731     .name = TYPE_DESIGNWARE_PCIE_ROOT,
 732     .parent = TYPE_PCI_BRIDGE,
 733     .instance_size = sizeof(DesignwarePCIERoot),
 734     .class_init = designware_pcie_root_class_init,
 735     .interfaces = (InterfaceInfo[]) {
 736         { INTERFACE_PCIE_DEVICE },
 737         { }
 738     },
 739 };
 740
 741 static const TypeInfo designware_pcie_host_info = {
 742     .name       = TYPE_DESIGNWARE_PCIE_HOST,
 743     .parent     = TYPE_PCI_HOST_BRIDGE,
 744     .instance_size = sizeof(DesignwarePCIEHost),
 745     .instance_init = designware_pcie_host_init,
 746     .class_init = designware_pcie_host_class_init,
 747 };
 748
 749 static void designware_pcie_register(void)
 750 {
 751     type_register_static(&designware_pcie_root_info);
 752     type_register_static(&designware_pcie_host_info);
 753 }
 754 type_init(designware_pcie_register)