sd/milkymist-memcard: Fix format string
[qemu/armbru.git] / tools / virtiofsd / fuse_common.h
blob686c42c0a5281f998ee564641195a4b781aa09c0
1 /*
2 * FUSE: Filesystem in Userspace
3 * Copyright (C) 2001-2007 Miklos Szeredi <miklos@szeredi.hu>
5 * This program can be distributed under the terms of the GNU LGPLv2.
6 * See the file COPYING.LIB.
7 */
9 /** @file */
11 #if !defined(FUSE_H_) && !defined(FUSE_LOWLEVEL_H_)
12 #error \
13 "Never include <fuse_common.h> directly; use <fuse.h> or <fuse_lowlevel.h> instead."
14 #endif
16 #ifndef FUSE_COMMON_H_
17 #define FUSE_COMMON_H_
19 #include "fuse_log.h"
20 #include "fuse_opt.h"
21 #include <stdint.h>
22 #include <sys/types.h>
24 /** Major version of FUSE library interface */
25 #define FUSE_MAJOR_VERSION 3
27 /** Minor version of FUSE library interface */
28 #define FUSE_MINOR_VERSION 2
30 #define FUSE_MAKE_VERSION(maj, min) ((maj) * 10 + (min))
31 #define FUSE_VERSION FUSE_MAKE_VERSION(FUSE_MAJOR_VERSION, FUSE_MINOR_VERSION)
33 /**
34 * Information about an open file.
36 * File Handles are created by the open, opendir, and create methods and closed
37 * by the release and releasedir methods. Multiple file handles may be
38 * concurrently open for the same file. Generally, a client will create one
39 * file handle per file descriptor, though in some cases multiple file
40 * descriptors can share a single file handle.
42 struct fuse_file_info {
43 /** Open flags. Available in open() and release() */
44 int flags;
47 * In case of a write operation indicates if this was caused
48 * by a delayed write from the page cache. If so, then the
49 * context's pid, uid, and gid fields will not be valid, and
50 * the *fh* value may not match the *fh* value that would
51 * have been sent with the corresponding individual write
52 * requests if write caching had been disabled.
54 unsigned int writepage:1;
56 /** Can be filled in by open, to use direct I/O on this file. */
57 unsigned int direct_io:1;
60 * Can be filled in by open. It signals the kernel that any
61 * currently cached file data (ie., data that the filesystem
62 * provided the last time the file was open) need not be
63 * invalidated. Has no effect when set in other contexts (in
64 * particular it does nothing when set by opendir()).
66 unsigned int keep_cache:1;
69 * Indicates a flush operation. Set in flush operation, also
70 * maybe set in highlevel lock operation and lowlevel release
71 * operation.
73 unsigned int flush:1;
76 * Can be filled in by open, to indicate that the file is not
77 * seekable.
79 unsigned int nonseekable:1;
82 * Indicates that flock locks for this file should be
83 * released. If set, lock_owner shall contain a valid value.
84 * May only be set in ->release().
86 unsigned int flock_release:1;
89 * Can be filled in by opendir. It signals the kernel to
90 * enable caching of entries returned by readdir(). Has no
91 * effect when set in other contexts (in particular it does
92 * nothing when set by open()).
94 unsigned int cache_readdir:1;
96 /* Indicates that suid/sgid bits should be removed upon write */
97 unsigned int kill_priv:1;
100 /** Padding. Reserved for future use*/
101 unsigned int padding:24;
102 unsigned int padding2:32;
105 * File handle id. May be filled in by filesystem in create,
106 * open, and opendir(). Available in most other file operations on the
107 * same file handle.
109 uint64_t fh;
111 /** Lock owner id. Available in locking operations and flush */
112 uint64_t lock_owner;
115 * Requested poll events. Available in ->poll. Only set on kernels
116 * which support it. If unsupported, this field is set to zero.
118 uint32_t poll_events;
122 * Capability bits for 'fuse_conn_info.capable' and 'fuse_conn_info.want'
126 * Indicates that the filesystem supports asynchronous read requests.
128 * If this capability is not requested/available, the kernel will
129 * ensure that there is at most one pending read request per
130 * file-handle at any time, and will attempt to order read requests by
131 * increasing offset.
133 * This feature is enabled by default when supported by the kernel.
135 #define FUSE_CAP_ASYNC_READ (1 << 0)
138 * Indicates that the filesystem supports "remote" locking.
140 * This feature is enabled by default when supported by the kernel,
141 * and if getlk() and setlk() handlers are implemented.
143 #define FUSE_CAP_POSIX_LOCKS (1 << 1)
146 * Indicates that the filesystem supports the O_TRUNC open flag. If
147 * disabled, and an application specifies O_TRUNC, fuse first calls
148 * truncate() and then open() with O_TRUNC filtered out.
150 * This feature is enabled by default when supported by the kernel.
152 #define FUSE_CAP_ATOMIC_O_TRUNC (1 << 3)
155 * Indicates that the filesystem supports lookups of "." and "..".
157 * This feature is disabled by default.
159 #define FUSE_CAP_EXPORT_SUPPORT (1 << 4)
162 * Indicates that the kernel should not apply the umask to the
163 * file mode on create operations.
165 * This feature is disabled by default.
167 #define FUSE_CAP_DONT_MASK (1 << 6)
170 * Indicates that libfuse should try to use splice() when writing to
171 * the fuse device. This may improve performance.
173 * This feature is disabled by default.
175 #define FUSE_CAP_SPLICE_WRITE (1 << 7)
178 * Indicates that libfuse should try to move pages instead of copying when
179 * writing to / reading from the fuse device. This may improve performance.
181 * This feature is disabled by default.
183 #define FUSE_CAP_SPLICE_MOVE (1 << 8)
186 * Indicates that libfuse should try to use splice() when reading from
187 * the fuse device. This may improve performance.
189 * This feature is enabled by default when supported by the kernel and
190 * if the filesystem implements a write_buf() handler.
192 #define FUSE_CAP_SPLICE_READ (1 << 9)
195 * If set, the calls to flock(2) will be emulated using POSIX locks and must
196 * then be handled by the filesystem's setlock() handler.
198 * If not set, flock(2) calls will be handled by the FUSE kernel module
199 * internally (so any access that does not go through the kernel cannot be taken
200 * into account).
202 * This feature is enabled by default when supported by the kernel and
203 * if the filesystem implements a flock() handler.
205 #define FUSE_CAP_FLOCK_LOCKS (1 << 10)
208 * Indicates that the filesystem supports ioctl's on directories.
210 * This feature is enabled by default when supported by the kernel.
212 #define FUSE_CAP_IOCTL_DIR (1 << 11)
215 * Traditionally, while a file is open the FUSE kernel module only
216 * asks the filesystem for an update of the file's attributes when a
217 * client attempts to read beyond EOF. This is unsuitable for
218 * e.g. network filesystems, where the file contents may change
219 * without the kernel knowing about it.
221 * If this flag is set, FUSE will check the validity of the attributes
222 * on every read. If the attributes are no longer valid (i.e., if the
223 * *attr_timeout* passed to fuse_reply_attr() or set in `struct
224 * fuse_entry_param` has passed), it will first issue a `getattr`
225 * request. If the new mtime differs from the previous value, any
226 * cached file *contents* will be invalidated as well.
228 * This flag should always be set when available. If all file changes
229 * go through the kernel, *attr_timeout* should be set to a very large
230 * number to avoid unnecessary getattr() calls.
232 * This feature is enabled by default when supported by the kernel.
234 #define FUSE_CAP_AUTO_INVAL_DATA (1 << 12)
237 * Indicates that the filesystem supports readdirplus.
239 * This feature is enabled by default when supported by the kernel and if the
240 * filesystem implements a readdirplus() handler.
242 #define FUSE_CAP_READDIRPLUS (1 << 13)
245 * Indicates that the filesystem supports adaptive readdirplus.
247 * If FUSE_CAP_READDIRPLUS is not set, this flag has no effect.
249 * If FUSE_CAP_READDIRPLUS is set and this flag is not set, the kernel
250 * will always issue readdirplus() requests to retrieve directory
251 * contents.
253 * If FUSE_CAP_READDIRPLUS is set and this flag is set, the kernel
254 * will issue both readdir() and readdirplus() requests, depending on
255 * how much information is expected to be required.
257 * As of Linux 4.20, the algorithm is as follows: when userspace
258 * starts to read directory entries, issue a READDIRPLUS request to
259 * the filesystem. If any entry attributes have been looked up by the
260 * time userspace requests the next batch of entries continue with
261 * READDIRPLUS, otherwise switch to plain READDIR. This will reasult
262 * in eg plain "ls" triggering READDIRPLUS first then READDIR after
263 * that because it doesn't do lookups. "ls -l" should result in all
264 * READDIRPLUS, except if dentries are already cached.
266 * This feature is enabled by default when supported by the kernel and
267 * if the filesystem implements both a readdirplus() and a readdir()
268 * handler.
270 #define FUSE_CAP_READDIRPLUS_AUTO (1 << 14)
273 * Indicates that the filesystem supports asynchronous direct I/O submission.
275 * If this capability is not requested/available, the kernel will ensure that
276 * there is at most one pending read and one pending write request per direct
277 * I/O file-handle at any time.
279 * This feature is enabled by default when supported by the kernel.
281 #define FUSE_CAP_ASYNC_DIO (1 << 15)
284 * Indicates that writeback caching should be enabled. This means that
285 * individual write request may be buffered and merged in the kernel
286 * before they are send to the filesystem.
288 * This feature is disabled by default.
290 #define FUSE_CAP_WRITEBACK_CACHE (1 << 16)
293 * Indicates support for zero-message opens. If this flag is set in
294 * the `capable` field of the `fuse_conn_info` structure, then the
295 * filesystem may return `ENOSYS` from the open() handler to indicate
296 * success. Further attempts to open files will be handled in the
297 * kernel. (If this flag is not set, returning ENOSYS will be treated
298 * as an error and signaled to the caller).
300 * Setting (or unsetting) this flag in the `want` field has *no
301 * effect*.
303 #define FUSE_CAP_NO_OPEN_SUPPORT (1 << 17)
306 * Indicates support for parallel directory operations. If this flag
307 * is unset, the FUSE kernel module will ensure that lookup() and
308 * readdir() requests are never issued concurrently for the same
309 * directory.
311 * This feature is enabled by default when supported by the kernel.
313 #define FUSE_CAP_PARALLEL_DIROPS (1 << 18)
316 * Indicates support for POSIX ACLs.
318 * If this feature is enabled, the kernel will cache and have
319 * responsibility for enforcing ACLs. ACL will be stored as xattrs and
320 * passed to userspace, which is responsible for updating the ACLs in
321 * the filesystem, keeping the file mode in sync with the ACL, and
322 * ensuring inheritance of default ACLs when new filesystem nodes are
323 * created. Note that this requires that the file system is able to
324 * parse and interpret the xattr representation of ACLs.
326 * Enabling this feature implicitly turns on the
327 * ``default_permissions`` mount option (even if it was not passed to
328 * mount(2)).
330 * This feature is disabled by default.
332 #define FUSE_CAP_POSIX_ACL (1 << 19)
335 * Indicates that the filesystem is responsible for unsetting
336 * setuid and setgid bits when a file is written, truncated, or
337 * its owner is changed.
339 * This feature is enabled by default when supported by the kernel.
341 #define FUSE_CAP_HANDLE_KILLPRIV (1 << 20)
344 * Indicates support for zero-message opendirs. If this flag is set in
345 * the `capable` field of the `fuse_conn_info` structure, then the filesystem
346 * may return `ENOSYS` from the opendir() handler to indicate success. Further
347 * opendir and releasedir messages will be handled in the kernel. (If this
348 * flag is not set, returning ENOSYS will be treated as an error and signalled
349 * to the caller.)
351 * Setting (or unsetting) this flag in the `want` field has *no effect*.
353 #define FUSE_CAP_NO_OPENDIR_SUPPORT (1 << 24)
356 * Ioctl flags
358 * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
359 * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
360 * FUSE_IOCTL_RETRY: retry with new iovecs
361 * FUSE_IOCTL_DIR: is a directory
363 * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
365 #define FUSE_IOCTL_COMPAT (1 << 0)
366 #define FUSE_IOCTL_UNRESTRICTED (1 << 1)
367 #define FUSE_IOCTL_RETRY (1 << 2)
368 #define FUSE_IOCTL_DIR (1 << 4)
370 #define FUSE_IOCTL_MAX_IOV 256
373 * Connection information, passed to the ->init() method
375 * Some of the elements are read-write, these can be changed to
376 * indicate the value requested by the filesystem. The requested
377 * value must usually be smaller than the indicated value.
379 struct fuse_conn_info {
381 * Major version of the protocol (read-only)
383 unsigned proto_major;
386 * Minor version of the protocol (read-only)
388 unsigned proto_minor;
391 * Maximum size of the write buffer
393 unsigned max_write;
396 * Maximum size of read requests. A value of zero indicates no
397 * limit. However, even if the filesystem does not specify a
398 * limit, the maximum size of read requests will still be
399 * limited by the kernel.
401 * NOTE: For the time being, the maximum size of read requests
402 * must be set both here *and* passed to fuse_session_new()
403 * using the ``-o max_read=<n>`` mount option. At some point
404 * in the future, specifying the mount option will no longer
405 * be necessary.
407 unsigned max_read;
410 * Maximum readahead
412 unsigned max_readahead;
415 * Capability flags that the kernel supports (read-only)
417 unsigned capable;
420 * Capability flags that the filesystem wants to enable.
422 * libfuse attempts to initialize this field with
423 * reasonable default values before calling the init() handler.
425 unsigned want;
428 * Maximum number of pending "background" requests. A
429 * background request is any type of request for which the
430 * total number is not limited by other means. As of kernel
431 * 4.8, only two types of requests fall into this category:
433 * 1. Read-ahead requests
434 * 2. Asynchronous direct I/O requests
436 * Read-ahead requests are generated (if max_readahead is
437 * non-zero) by the kernel to preemptively fill its caches
438 * when it anticipates that userspace will soon read more
439 * data.
441 * Asynchronous direct I/O requests are generated if
442 * FUSE_CAP_ASYNC_DIO is enabled and userspace submits a large
443 * direct I/O request. In this case the kernel will internally
444 * split it up into multiple smaller requests and submit them
445 * to the filesystem concurrently.
447 * Note that the following requests are *not* background
448 * requests: writeback requests (limited by the kernel's
449 * flusher algorithm), regular (i.e., synchronous and
450 * buffered) userspace read/write requests (limited to one per
451 * thread), asynchronous read requests (Linux's io_submit(2)
452 * call actually blocks, so these are also limited to one per
453 * thread).
455 unsigned max_background;
458 * Kernel congestion threshold parameter. If the number of pending
459 * background requests exceeds this number, the FUSE kernel module will
460 * mark the filesystem as "congested". This instructs the kernel to
461 * expect that queued requests will take some time to complete, and to
462 * adjust its algorithms accordingly (e.g. by putting a waiting thread
463 * to sleep instead of using a busy-loop).
465 unsigned congestion_threshold;
468 * When FUSE_CAP_WRITEBACK_CACHE is enabled, the kernel is responsible
469 * for updating mtime and ctime when write requests are received. The
470 * updated values are passed to the filesystem with setattr() requests.
471 * However, if the filesystem does not support the full resolution of
472 * the kernel timestamps (nanoseconds), the mtime and ctime values used
473 * by kernel and filesystem will differ (and result in an apparent
474 * change of times after a cache flush).
476 * To prevent this problem, this variable can be used to inform the
477 * kernel about the timestamp granularity supported by the file-system.
478 * The value should be power of 10. The default is 1, i.e. full
479 * nano-second resolution. Filesystems supporting only second resolution
480 * should set this to 1000000000.
482 unsigned time_gran;
485 * For future use.
487 unsigned reserved[22];
490 struct fuse_session;
491 struct fuse_pollhandle;
492 struct fuse_conn_info_opts;
495 * This function parses several command-line options that can be used
496 * to override elements of struct fuse_conn_info. The pointer returned
497 * by this function should be passed to the
498 * fuse_apply_conn_info_opts() method by the file system's init()
499 * handler.
501 * Before using this function, think twice if you really want these
502 * parameters to be adjustable from the command line. In most cases,
503 * they should be determined by the file system internally.
505 * The following options are recognized:
507 * -o max_write=N sets conn->max_write
508 * -o max_readahead=N sets conn->max_readahead
509 * -o max_background=N sets conn->max_background
510 * -o congestion_threshold=N sets conn->congestion_threshold
511 * -o async_read sets FUSE_CAP_ASYNC_READ in conn->want
512 * -o sync_read unsets FUSE_CAP_ASYNC_READ in conn->want
513 * -o atomic_o_trunc sets FUSE_CAP_ATOMIC_O_TRUNC in conn->want
514 * -o no_remote_lock Equivalent to -o
515 *no_remote_flock,no_remote_posix_lock -o no_remote_flock Unsets
516 *FUSE_CAP_FLOCK_LOCKS in conn->want -o no_remote_posix_lock Unsets
517 *FUSE_CAP_POSIX_LOCKS in conn->want -o [no_]splice_write (un-)sets
518 *FUSE_CAP_SPLICE_WRITE in conn->want -o [no_]splice_move (un-)sets
519 *FUSE_CAP_SPLICE_MOVE in conn->want -o [no_]splice_read (un-)sets
520 *FUSE_CAP_SPLICE_READ in conn->want -o [no_]auto_inval_data (un-)sets
521 *FUSE_CAP_AUTO_INVAL_DATA in conn->want -o readdirplus=no unsets
522 *FUSE_CAP_READDIRPLUS in conn->want -o readdirplus=yes sets
523 *FUSE_CAP_READDIRPLUS and unsets FUSE_CAP_READDIRPLUS_AUTO in conn->want -o
524 *readdirplus=auto sets FUSE_CAP_READDIRPLUS and FUSE_CAP_READDIRPLUS_AUTO
525 *in conn->want -o [no_]async_dio (un-)sets FUSE_CAP_ASYNC_DIO in
526 *conn->want -o [no_]writeback_cache (un-)sets FUSE_CAP_WRITEBACK_CACHE in
527 *conn->want -o time_gran=N sets conn->time_gran
529 * Known options will be removed from *args*, unknown options will be
530 * passed through unchanged.
532 * @param args argument vector (input+output)
533 * @return parsed options
535 struct fuse_conn_info_opts *fuse_parse_conn_info_opts(struct fuse_args *args);
538 * This function applies the (parsed) parameters in *opts* to the
539 * *conn* pointer. It may modify the following fields: wants,
540 * max_write, max_readahead, congestion_threshold, max_background,
541 * time_gran. A field is only set (or unset) if the corresponding
542 * option has been explicitly set.
544 void fuse_apply_conn_info_opts(struct fuse_conn_info_opts *opts,
545 struct fuse_conn_info *conn);
548 * Go into the background
550 * @param foreground if true, stay in the foreground
551 * @return 0 on success, -1 on failure
553 int fuse_daemonize(int foreground);
556 * Get the version of the library
558 * @return the version
560 int fuse_version(void);
563 * Get the full package version string of the library
565 * @return the package version
567 const char *fuse_pkgversion(void);
570 * Destroy poll handle
572 * @param ph the poll handle
574 void fuse_pollhandle_destroy(struct fuse_pollhandle *ph);
577 * Data buffer
581 * Buffer flags
583 enum fuse_buf_flags {
585 * Buffer contains a file descriptor
587 * If this flag is set, the .fd field is valid, otherwise the
588 * .mem fields is valid.
590 FUSE_BUF_IS_FD = (1 << 1),
593 * Seek on the file descriptor
595 * If this flag is set then the .pos field is valid and is
596 * used to seek to the given offset before performing
597 * operation on file descriptor.
599 FUSE_BUF_FD_SEEK = (1 << 2),
602 * Retry operation on file descriptor
604 * If this flag is set then retry operation on file descriptor
605 * until .size bytes have been copied or an error or EOF is
606 * detected.
608 FUSE_BUF_FD_RETRY = (1 << 3),
612 * Single data buffer
614 * Generic data buffer for I/O, extended attributes, etc... Data may
615 * be supplied as a memory pointer or as a file descriptor
617 struct fuse_buf {
619 * Size of data in bytes
621 size_t size;
624 * Buffer flags
626 enum fuse_buf_flags flags;
629 * Memory pointer
631 * Used unless FUSE_BUF_IS_FD flag is set.
633 void *mem;
636 * File descriptor
638 * Used if FUSE_BUF_IS_FD flag is set.
640 int fd;
643 * File position
645 * Used if FUSE_BUF_FD_SEEK flag is set.
647 off_t pos;
651 * Data buffer vector
653 * An array of data buffers, each containing a memory pointer or a
654 * file descriptor.
656 * Allocate dynamically to add more than one buffer.
658 struct fuse_bufvec {
660 * Number of buffers in the array
662 size_t count;
665 * Index of current buffer within the array
667 size_t idx;
670 * Current offset within the current buffer
672 size_t off;
675 * Array of buffers
677 struct fuse_buf buf[1];
680 /* Initialize bufvec with a single buffer of given size */
681 #define FUSE_BUFVEC_INIT(size__) \
682 ((struct fuse_bufvec){ /* .count= */ 1, \
683 /* .idx = */ 0, \
684 /* .off = */ 0, /* .buf = */ \
685 { /* [0] = */ { \
686 /* .size = */ (size__), \
687 /* .flags = */ (enum fuse_buf_flags)0, \
688 /* .mem = */ NULL, \
689 /* .fd = */ -1, \
690 /* .pos = */ 0, \
691 } } })
694 * Get total size of data in a fuse buffer vector
696 * @param bufv buffer vector
697 * @return size of data
699 size_t fuse_buf_size(const struct fuse_bufvec *bufv);
702 * Copy data from one buffer vector to another
704 * @param dst destination buffer vector
705 * @param src source buffer vector
706 * @return actual number of bytes copied or -errno on error
708 ssize_t fuse_buf_copy(struct fuse_bufvec *dst, struct fuse_bufvec *src);
711 * Memory buffer iterator
714 struct fuse_mbuf_iter {
716 * Data pointer
718 void *mem;
721 * Total length, in bytes
723 size_t size;
726 * Offset from start of buffer
728 size_t pos;
731 /* Initialize memory buffer iterator from a fuse_buf */
732 #define FUSE_MBUF_ITER_INIT(fbuf) \
733 ((struct fuse_mbuf_iter){ \
734 .mem = fbuf->mem, \
735 .size = fbuf->size, \
736 .pos = 0, \
740 * Consume bytes from a memory buffer iterator
742 * @param iter memory buffer iterator
743 * @param len number of bytes to consume
744 * @return pointer to start of consumed bytes or
745 * NULL if advancing beyond end of buffer
747 void *fuse_mbuf_iter_advance(struct fuse_mbuf_iter *iter, size_t len);
750 * Consume a NUL-terminated string from a memory buffer iterator
752 * @param iter memory buffer iterator
753 * @return pointer to the string or
754 * NULL if advancing beyond end of buffer or there is no NUL-terminator
756 const char *fuse_mbuf_iter_advance_str(struct fuse_mbuf_iter *iter);
759 * Signal handling
762 * Exit session on HUP, TERM and INT signals and ignore PIPE signal
764 * Stores session in a global variable. May only be called once per
765 * process until fuse_remove_signal_handlers() is called.
767 * Once either of the POSIX signals arrives, the signal handler calls
768 * fuse_session_exit().
770 * @param se the session to exit
771 * @return 0 on success, -1 on failure
773 * See also:
774 * fuse_remove_signal_handlers()
776 int fuse_set_signal_handlers(struct fuse_session *se);
779 * Restore default signal handlers
781 * Resets global session. After this fuse_set_signal_handlers() may
782 * be called again.
784 * @param se the same session as given in fuse_set_signal_handlers()
786 * See also:
787 * fuse_set_signal_handlers()
789 void fuse_remove_signal_handlers(struct fuse_session *se);
792 * Compatibility stuff
795 #if !defined(FUSE_USE_VERSION) || FUSE_USE_VERSION < 30
796 #error only API version 30 or greater is supported
797 #endif
801 * This interface uses 64 bit off_t.
803 * On 32bit systems please add -D_FILE_OFFSET_BITS=64 to your compile flags!
806 #if defined(__GNUC__) && \
807 (__GNUC__ > 4 || __GNUC__ == 4 && __GNUC_MINOR__ >= 6) && \
808 !defined __cplusplus
809 _Static_assert(sizeof(off_t) == 8, "fuse: off_t must be 64bit");
810 #else
811 struct _fuse_off_t_must_be_64bit_dummy_struct {
812 unsigned _fuse_off_t_must_be_64bit:((sizeof(off_t) == 8) ? 1 : -1);
814 #endif
816 #endif /* FUSE_COMMON_H_ */