hw/arm/strongarm.c

   1 /*
   2  * StrongARM SA-1100/SA-1110 emulation
   3  *
   4  * Copyright (C) 2011 Dmitry Eremin-Solenikov
   5  *
   6  * Largely based on StrongARM emulation:
   7  * Copyright (c) 2006 Openedhand Ltd.
   8  * Written by Andrzej Zaborowski <balrog@zabor.org>
   9  *
  10  * UART code based on QEMU 16550A UART emulation
  11  * Copyright (c) 2003-2004 Fabrice Bellard
  12  * Copyright (c) 2008 Citrix Systems, Inc.
  13  *
  14  *  This program is free software; you can redistribute it and/or modify
  15  *  it under the terms of the GNU General Public License version 2 as
  16  *  published by the Free Software Foundation.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License along
  24  *  with this program; if not, see <http://www.gnu.org/licenses/>.
  25  *
  26  *  Contributions after 2012-01-13 are licensed under the terms of the
  27  *  GNU GPL, version 2 or (at your option) any later version.
  28  */
  29
  30 #include "qemu/osdep.h"
  31 #include "hw/irq.h"
  32 #include "hw/qdev-properties.h"
  33 #include "hw/qdev-properties-system.h"
  34 #include "hw/sysbus.h"
  35 #include "migration/vmstate.h"
  36 #include "strongarm.h"
  37 #include "qemu/error-report.h"
  38 #include "hw/arm/boot.h"
  39 #include "chardev/char-fe.h"
  40 #include "chardev/char-serial.h"
  41 #include "sysemu/sysemu.h"
  42 #include "sysemu/rtc.h"
  43 #include "hw/ssi/ssi.h"
  44 #include "qapi/error.h"
  45 #include "qemu/cutils.h"
  46 #include "qemu/log.h"
  47 #include "qom/object.h"
  48 #include "target/arm/cpu-qom.h"
  49 #include "trace.h"
  50
  51 /*
  52  TODO
  53  - Implement cp15, c14 ?
  54  - Implement cp15, c15 !!! (idle used in L)
  55  - Implement idle mode handling/DIM
  56  - Implement sleep mode/Wake sources
  57  - Implement reset control
  58  - Implement memory control regs
  59  - PCMCIA handling
  60  - Maybe support MBGNT/MBREQ
  61  - DMA channels
  62  - GPCLK
  63  - IrDA
  64  - MCP
  65  - Enhance UART with modem signals
  66  */
  67
  68 static struct {
  69     hwaddr io_base;
  70     int irq;
  71 } sa_serial[] = {
  72     { 0x80010000, SA_PIC_UART1 },
  73     { 0x80030000, SA_PIC_UART2 },
  74     { 0x80050000, SA_PIC_UART3 },
  75     { 0, 0 }
  76 };
  77
  78 /* Interrupt Controller */
  79
  80 #define TYPE_STRONGARM_PIC "strongarm_pic"
  81 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPICState, STRONGARM_PIC)
  82
  83 struct StrongARMPICState {
  84     SysBusDevice parent_obj;
  85
  86     MemoryRegion iomem;
  87     qemu_irq    irq;
  88     qemu_irq    fiq;
  89
  90     uint32_t pending;
  91     uint32_t enabled;
  92     uint32_t is_fiq;
  93     uint32_t int_idle;
  94 };
  95
  96 #define ICIP    0x00
  97 #define ICMR    0x04
  98 #define ICLR    0x08
  99 #define ICFP    0x10
 100 #define ICPR    0x20
 101 #define ICCR    0x0c
 102
 103 #define SA_PIC_SRCS     32
 104
 105
 106 static void strongarm_pic_update(void *opaque)
 107 {
 108     StrongARMPICState *s = opaque;
 109
 110     /* FIXME: reflect DIM */
 111     qemu_set_irq(s->fiq, s->pending & s->enabled &  s->is_fiq);
 112     qemu_set_irq(s->irq, s->pending & s->enabled & ~s->is_fiq);
 113 }
 114
 115 static void strongarm_pic_set_irq(void *opaque, int irq, int level)
 116 {
 117     StrongARMPICState *s = opaque;
 118
 119     if (level) {
 120         s->pending |= 1 << irq;
 121     } else {
 122         s->pending &= ~(1 << irq);
 123     }
 124
 125     strongarm_pic_update(s);
 126 }
 127
 128 static uint64_t strongarm_pic_mem_read(void *opaque, hwaddr offset,
 129                                        unsigned size)
 130 {
 131     StrongARMPICState *s = opaque;
 132
 133     switch (offset) {
 134     case ICIP:
 135         return s->pending & ~s->is_fiq & s->enabled;
 136     case ICMR:
 137         return s->enabled;
 138     case ICLR:
 139         return s->is_fiq;
 140     case ICCR:
 141         return s->int_idle == 0;
 142     case ICFP:
 143         return s->pending & s->is_fiq & s->enabled;
 144     case ICPR:
 145         return s->pending;
 146     default:
 147         qemu_log_mask(LOG_GUEST_ERROR,
 148                       "%s: Bad register offset 0x"HWADDR_FMT_plx"\n",
 149                       __func__, offset);
 150         return 0;
 151     }
 152 }
 153
 154 static void strongarm_pic_mem_write(void *opaque, hwaddr offset,
 155                                     uint64_t value, unsigned size)
 156 {
 157     StrongARMPICState *s = opaque;
 158
 159     switch (offset) {
 160     case ICMR:
 161         s->enabled = value;
 162         break;
 163     case ICLR:
 164         s->is_fiq = value;
 165         break;
 166     case ICCR:
 167         s->int_idle = (value & 1) ? 0 : ~0;
 168         break;
 169     default:
 170         qemu_log_mask(LOG_GUEST_ERROR,
 171                      "%s: Bad register offset 0x"HWADDR_FMT_plx"\n",
 172                      __func__, offset);
 173         break;
 174     }
 175     strongarm_pic_update(s);
 176 }
 177
 178 static const MemoryRegionOps strongarm_pic_ops = {
 179     .read = strongarm_pic_mem_read,
 180     .write = strongarm_pic_mem_write,
 181     .endianness = DEVICE_NATIVE_ENDIAN,
 182 };
 183
 184 static void strongarm_pic_initfn(Object *obj)
 185 {
 186     DeviceState *dev = DEVICE(obj);
 187     StrongARMPICState *s = STRONGARM_PIC(obj);
 188     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 189
 190     qdev_init_gpio_in(dev, strongarm_pic_set_irq, SA_PIC_SRCS);
 191     memory_region_init_io(&s->iomem, obj, &strongarm_pic_ops, s,
 192                           "pic", 0x1000);
 193     sysbus_init_mmio(sbd, &s->iomem);
 194     sysbus_init_irq(sbd, &s->irq);
 195     sysbus_init_irq(sbd, &s->fiq);
 196 }
 197
 198 static int strongarm_pic_post_load(void *opaque, int version_id)
 199 {
 200     strongarm_pic_update(opaque);
 201     return 0;
 202 }
 203
 204 static const VMStateDescription vmstate_strongarm_pic_regs = {
 205     .name = "strongarm_pic",
 206     .version_id = 0,
 207     .minimum_version_id = 0,
 208     .post_load = strongarm_pic_post_load,
 209     .fields = (const VMStateField[]) {
 210         VMSTATE_UINT32(pending, StrongARMPICState),
 211         VMSTATE_UINT32(enabled, StrongARMPICState),
 212         VMSTATE_UINT32(is_fiq, StrongARMPICState),
 213         VMSTATE_UINT32(int_idle, StrongARMPICState),
 214         VMSTATE_END_OF_LIST(),
 215     },
 216 };
 217
 218 static void strongarm_pic_class_init(ObjectClass *klass, void *data)
 219 {
 220     DeviceClass *dc = DEVICE_CLASS(klass);
 221
 222     dc->desc = "StrongARM PIC";
 223     dc->vmsd = &vmstate_strongarm_pic_regs;
 224 }
 225
 226 static const TypeInfo strongarm_pic_info = {
 227     .name          = TYPE_STRONGARM_PIC,
 228     .parent        = TYPE_SYS_BUS_DEVICE,
 229     .instance_size = sizeof(StrongARMPICState),
 230     .instance_init = strongarm_pic_initfn,
 231     .class_init    = strongarm_pic_class_init,
 232 };
 233
 234 /* Real-Time Clock */
 235 #define RTAR 0x00 /* RTC Alarm register */
 236 #define RCNR 0x04 /* RTC Counter register */
 237 #define RTTR 0x08 /* RTC Timer Trim register */
 238 #define RTSR 0x10 /* RTC Status register */
 239
 240 #define RTSR_AL (1 << 0) /* RTC Alarm detected */
 241 #define RTSR_HZ (1 << 1) /* RTC 1Hz detected */
 242 #define RTSR_ALE (1 << 2) /* RTC Alarm enable */
 243 #define RTSR_HZE (1 << 3) /* RTC 1Hz enable */
 244
 245 /* 16 LSB of RTTR are clockdiv for internal trim logic,
 246  * trim delete isn't emulated, so
 247  * f = 32 768 / (RTTR_trim + 1) */
 248
 249 #define TYPE_STRONGARM_RTC "strongarm-rtc"
 250 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMRTCState, STRONGARM_RTC)
 251
 252 struct StrongARMRTCState {
 253     SysBusDevice parent_obj;
 254
 255     MemoryRegion iomem;
 256     uint32_t rttr;
 257     uint32_t rtsr;
 258     uint32_t rtar;
 259     uint32_t last_rcnr;
 260     int64_t last_hz;
 261     QEMUTimer *rtc_alarm;
 262     QEMUTimer *rtc_hz;
 263     qemu_irq rtc_irq;
 264     qemu_irq rtc_hz_irq;
 265 };
 266
 267 static inline void strongarm_rtc_int_update(StrongARMRTCState *s)
 268 {
 269     qemu_set_irq(s->rtc_irq, s->rtsr & RTSR_AL);
 270     qemu_set_irq(s->rtc_hz_irq, s->rtsr & RTSR_HZ);
 271 }
 272
 273 static void strongarm_rtc_hzupdate(StrongARMRTCState *s)
 274 {
 275     int64_t rt = qemu_clock_get_ms(rtc_clock);
 276     s->last_rcnr += ((rt - s->last_hz) << 15) /
 277             (1000 * ((s->rttr & 0xffff) + 1));
 278     s->last_hz = rt;
 279 }
 280
 281 static inline void strongarm_rtc_timer_update(StrongARMRTCState *s)
 282 {
 283     if ((s->rtsr & RTSR_HZE) && !(s->rtsr & RTSR_HZ)) {
 284         timer_mod(s->rtc_hz, s->last_hz + 1000);
 285     } else {
 286         timer_del(s->rtc_hz);
 287     }
 288
 289     if ((s->rtsr & RTSR_ALE) && !(s->rtsr & RTSR_AL)) {
 290         timer_mod(s->rtc_alarm, s->last_hz +
 291                 (((s->rtar - s->last_rcnr) * 1000 *
 292                   ((s->rttr & 0xffff) + 1)) >> 15));
 293     } else {
 294         timer_del(s->rtc_alarm);
 295     }
 296 }
 297
 298 static inline void strongarm_rtc_alarm_tick(void *opaque)
 299 {
 300     StrongARMRTCState *s = opaque;
 301     s->rtsr |= RTSR_AL;
 302     strongarm_rtc_timer_update(s);
 303     strongarm_rtc_int_update(s);
 304 }
 305
 306 static inline void strongarm_rtc_hz_tick(void *opaque)
 307 {
 308     StrongARMRTCState *s = opaque;
 309     s->rtsr |= RTSR_HZ;
 310     strongarm_rtc_timer_update(s);
 311     strongarm_rtc_int_update(s);
 312 }
 313
 314 static uint64_t strongarm_rtc_read(void *opaque, hwaddr addr,
 315                                    unsigned size)
 316 {
 317     StrongARMRTCState *s = opaque;
 318
 319     switch (addr) {
 320     case RTTR:
 321         return s->rttr;
 322     case RTSR:
 323         return s->rtsr;
 324     case RTAR:
 325         return s->rtar;
 326     case RCNR:
 327         return s->last_rcnr +
 328                 ((qemu_clock_get_ms(rtc_clock) - s->last_hz) << 15) /
 329                 (1000 * ((s->rttr & 0xffff) + 1));
 330     default:
 331         qemu_log_mask(LOG_GUEST_ERROR,
 332                       "%s: Bad rtc register read 0x"HWADDR_FMT_plx"\n",
 333                       __func__, addr);
 334         return 0;
 335     }
 336 }
 337
 338 static void strongarm_rtc_write(void *opaque, hwaddr addr,
 339                                 uint64_t value, unsigned size)
 340 {
 341     StrongARMRTCState *s = opaque;
 342     uint32_t old_rtsr;
 343
 344     switch (addr) {
 345     case RTTR:
 346         strongarm_rtc_hzupdate(s);
 347         s->rttr = value;
 348         strongarm_rtc_timer_update(s);
 349         break;
 350
 351     case RTSR:
 352         old_rtsr = s->rtsr;
 353         s->rtsr = (value & (RTSR_ALE | RTSR_HZE)) |
 354                   (s->rtsr & ~(value & (RTSR_AL | RTSR_HZ)));
 355
 356         if (s->rtsr != old_rtsr) {
 357             strongarm_rtc_timer_update(s);
 358         }
 359
 360         strongarm_rtc_int_update(s);
 361         break;
 362
 363     case RTAR:
 364         s->rtar = value;
 365         strongarm_rtc_timer_update(s);
 366         break;
 367
 368     case RCNR:
 369         strongarm_rtc_hzupdate(s);
 370         s->last_rcnr = value;
 371         strongarm_rtc_timer_update(s);
 372         break;
 373
 374     default:
 375         qemu_log_mask(LOG_GUEST_ERROR,
 376                       "%s: Bad rtc register write 0x"HWADDR_FMT_plx"\n",
 377                       __func__, addr);
 378     }
 379 }
 380
 381 static const MemoryRegionOps strongarm_rtc_ops = {
 382     .read = strongarm_rtc_read,
 383     .write = strongarm_rtc_write,
 384     .endianness = DEVICE_NATIVE_ENDIAN,
 385 };
 386
 387 static void strongarm_rtc_init(Object *obj)
 388 {
 389     StrongARMRTCState *s = STRONGARM_RTC(obj);
 390     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
 391     struct tm tm;
 392
 393     s->rttr = 0x0;
 394     s->rtsr = 0;
 395
 396     qemu_get_timedate(&tm, 0);
 397
 398     s->last_rcnr = (uint32_t) mktimegm(&tm);
 399     s->last_hz = qemu_clock_get_ms(rtc_clock);
 400
 401     sysbus_init_irq(dev, &s->rtc_irq);
 402     sysbus_init_irq(dev, &s->rtc_hz_irq);
 403
 404     memory_region_init_io(&s->iomem, obj, &strongarm_rtc_ops, s,
 405                           "rtc", 0x10000);
 406     sysbus_init_mmio(dev, &s->iomem);
 407 }
 408
 409 static void strongarm_rtc_realize(DeviceState *dev, Error **errp)
 410 {
 411     StrongARMRTCState *s = STRONGARM_RTC(dev);
 412     s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s);
 413     s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s);
 414 }
 415
 416 static int strongarm_rtc_pre_save(void *opaque)
 417 {
 418     StrongARMRTCState *s = opaque;
 419
 420     strongarm_rtc_hzupdate(s);
 421
 422     return 0;
 423 }
 424
 425 static int strongarm_rtc_post_load(void *opaque, int version_id)
 426 {
 427     StrongARMRTCState *s = opaque;
 428
 429     strongarm_rtc_timer_update(s);
 430     strongarm_rtc_int_update(s);
 431
 432     return 0;
 433 }
 434
 435 static const VMStateDescription vmstate_strongarm_rtc_regs = {
 436     .name = "strongarm-rtc",
 437     .version_id = 0,
 438     .minimum_version_id = 0,
 439     .pre_save = strongarm_rtc_pre_save,
 440     .post_load = strongarm_rtc_post_load,
 441     .fields = (const VMStateField[]) {
 442         VMSTATE_UINT32(rttr, StrongARMRTCState),
 443         VMSTATE_UINT32(rtsr, StrongARMRTCState),
 444         VMSTATE_UINT32(rtar, StrongARMRTCState),
 445         VMSTATE_UINT32(last_rcnr, StrongARMRTCState),
 446         VMSTATE_INT64(last_hz, StrongARMRTCState),
 447         VMSTATE_END_OF_LIST(),
 448     },
 449 };
 450
 451 static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data)
 452 {
 453     DeviceClass *dc = DEVICE_CLASS(klass);
 454
 455     dc->desc = "StrongARM RTC Controller";
 456     dc->vmsd = &vmstate_strongarm_rtc_regs;
 457     dc->realize = strongarm_rtc_realize;
 458 }
 459
 460 static const TypeInfo strongarm_rtc_sysbus_info = {
 461     .name          = TYPE_STRONGARM_RTC,
 462     .parent        = TYPE_SYS_BUS_DEVICE,
 463     .instance_size = sizeof(StrongARMRTCState),
 464     .instance_init = strongarm_rtc_init,
 465     .class_init    = strongarm_rtc_sysbus_class_init,
 466 };
 467
 468 /* GPIO */
 469 #define GPLR 0x00
 470 #define GPDR 0x04
 471 #define GPSR 0x08
 472 #define GPCR 0x0c
 473 #define GRER 0x10
 474 #define GFER 0x14
 475 #define GEDR 0x18
 476 #define GAFR 0x1c
 477
 478 #define TYPE_STRONGARM_GPIO "strongarm-gpio"
 479 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMGPIOInfo, STRONGARM_GPIO)
 480
 481 struct StrongARMGPIOInfo {
 482     SysBusDevice busdev;
 483     MemoryRegion iomem;
 484     qemu_irq handler[28];
 485     qemu_irq irqs[11];
 486     qemu_irq irqX;
 487
 488     uint32_t ilevel;
 489     uint32_t olevel;
 490     uint32_t dir;
 491     uint32_t rising;
 492     uint32_t falling;
 493     uint32_t status;
 494     uint32_t gafr;
 495
 496     uint32_t prev_level;
 497 };
 498
 499
 500 static void strongarm_gpio_irq_update(StrongARMGPIOInfo *s)
 501 {
 502     int i;
 503     for (i = 0; i < 11; i++) {
 504         qemu_set_irq(s->irqs[i], s->status & (1 << i));
 505     }
 506
 507     qemu_set_irq(s->irqX, (s->status & ~0x7ff));
 508 }
 509
 510 static void strongarm_gpio_set(void *opaque, int line, int level)
 511 {
 512     StrongARMGPIOInfo *s = opaque;
 513     uint32_t mask;
 514
 515     mask = 1 << line;
 516
 517     if (level) {
 518         s->status |= s->rising & mask &
 519                 ~s->ilevel & ~s->dir;
 520         s->ilevel |= mask;
 521     } else {
 522         s->status |= s->falling & mask &
 523                 s->ilevel & ~s->dir;
 524         s->ilevel &= ~mask;
 525     }
 526
 527     if (s->status & mask) {
 528         strongarm_gpio_irq_update(s);
 529     }
 530 }
 531
 532 static void strongarm_gpio_handler_update(StrongARMGPIOInfo *s)
 533 {
 534     uint32_t level, diff;
 535     int bit;
 536
 537     level = s->olevel & s->dir;
 538
 539     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 540         bit = ctz32(diff);
 541         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 542     }
 543
 544     s->prev_level = level;
 545 }
 546
 547 static uint64_t strongarm_gpio_read(void *opaque, hwaddr offset,
 548                                     unsigned size)
 549 {
 550     StrongARMGPIOInfo *s = opaque;
 551
 552     switch (offset) {
 553     case GPDR:        /* GPIO Pin-Direction registers */
 554         return s->dir;
 555
 556     case GPSR:        /* GPIO Pin-Output Set registers */
 557         qemu_log_mask(LOG_GUEST_ERROR,
 558                       "%s: read from write only register GPSR\n", __func__);
 559         return 0;
 560
 561     case GPCR:        /* GPIO Pin-Output Clear registers */
 562         qemu_log_mask(LOG_GUEST_ERROR,
 563                       "%s: read from write only register GPCR\n", __func__);
 564         return 0;
 565
 566     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 567         return s->rising;
 568
 569     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 570         return s->falling;
 571
 572     case GAFR:        /* GPIO Alternate Function registers */
 573         return s->gafr;
 574
 575     case GPLR:        /* GPIO Pin-Level registers */
 576         return (s->olevel & s->dir) |
 577                (s->ilevel & ~s->dir);
 578
 579     case GEDR:        /* GPIO Edge Detect Status registers */
 580         return s->status;
 581
 582     default:
 583         qemu_log_mask(LOG_GUEST_ERROR,
 584                       "%s: Bad gpio read offset 0x"HWADDR_FMT_plx"\n",
 585                       __func__, offset);
 586     }
 587
 588     return 0;
 589 }
 590
 591 static void strongarm_gpio_write(void *opaque, hwaddr offset,
 592                                  uint64_t value, unsigned size)
 593 {
 594     StrongARMGPIOInfo *s = opaque;
 595
 596     switch (offset) {
 597     case GPDR:        /* GPIO Pin-Direction registers */
 598         s->dir = value & 0x0fffffff;
 599         strongarm_gpio_handler_update(s);
 600         break;
 601
 602     case GPSR:        /* GPIO Pin-Output Set registers */
 603         s->olevel |= value & 0x0fffffff;
 604         strongarm_gpio_handler_update(s);
 605         break;
 606
 607     case GPCR:        /* GPIO Pin-Output Clear registers */
 608         s->olevel &= ~value;
 609         strongarm_gpio_handler_update(s);
 610         break;
 611
 612     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 613         s->rising = value;
 614         break;
 615
 616     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 617         s->falling = value;
 618         break;
 619
 620     case GAFR:        /* GPIO Alternate Function registers */
 621         s->gafr = value;
 622         break;
 623
 624     case GEDR:        /* GPIO Edge Detect Status registers */
 625         s->status &= ~value;
 626         strongarm_gpio_irq_update(s);
 627         break;
 628
 629     default:
 630         qemu_log_mask(LOG_GUEST_ERROR,
 631                       "%s: Bad write offset 0x"HWADDR_FMT_plx"\n",
 632                       __func__, offset);
 633     }
 634 }
 635
 636 static const MemoryRegionOps strongarm_gpio_ops = {
 637     .read = strongarm_gpio_read,
 638     .write = strongarm_gpio_write,
 639     .endianness = DEVICE_NATIVE_ENDIAN,
 640 };
 641
 642 static DeviceState *strongarm_gpio_init(hwaddr base,
 643                 DeviceState *pic)
 644 {
 645     DeviceState *dev;
 646     int i;
 647
 648     dev = qdev_new(TYPE_STRONGARM_GPIO);
 649     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 650
 651     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
 652     for (i = 0; i < 12; i++)
 653         sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
 654                     qdev_get_gpio_in(pic, SA_PIC_GPIO0_EDGE + i));
 655
 656     return dev;
 657 }
 658
 659 static void strongarm_gpio_initfn(Object *obj)
 660 {
 661     DeviceState *dev = DEVICE(obj);
 662     StrongARMGPIOInfo *s = STRONGARM_GPIO(obj);
 663     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 664     int i;
 665
 666     qdev_init_gpio_in(dev, strongarm_gpio_set, 28);
 667     qdev_init_gpio_out(dev, s->handler, 28);
 668
 669     memory_region_init_io(&s->iomem, obj, &strongarm_gpio_ops, s,
 670                           "gpio", 0x1000);
 671
 672     sysbus_init_mmio(sbd, &s->iomem);
 673     for (i = 0; i < 11; i++) {
 674         sysbus_init_irq(sbd, &s->irqs[i]);
 675     }
 676     sysbus_init_irq(sbd, &s->irqX);
 677 }
 678
 679 static const VMStateDescription vmstate_strongarm_gpio_regs = {
 680     .name = "strongarm-gpio",
 681     .version_id = 0,
 682     .minimum_version_id = 0,
 683     .fields = (const VMStateField[]) {
 684         VMSTATE_UINT32(ilevel, StrongARMGPIOInfo),
 685         VMSTATE_UINT32(olevel, StrongARMGPIOInfo),
 686         VMSTATE_UINT32(dir, StrongARMGPIOInfo),
 687         VMSTATE_UINT32(rising, StrongARMGPIOInfo),
 688         VMSTATE_UINT32(falling, StrongARMGPIOInfo),
 689         VMSTATE_UINT32(status, StrongARMGPIOInfo),
 690         VMSTATE_UINT32(gafr, StrongARMGPIOInfo),
 691         VMSTATE_UINT32(prev_level, StrongARMGPIOInfo),
 692         VMSTATE_END_OF_LIST(),
 693     },
 694 };
 695
 696 static void strongarm_gpio_class_init(ObjectClass *klass, void *data)
 697 {
 698     DeviceClass *dc = DEVICE_CLASS(klass);
 699
 700     dc->desc = "StrongARM GPIO controller";
 701     dc->vmsd = &vmstate_strongarm_gpio_regs;
 702 }
 703
 704 static const TypeInfo strongarm_gpio_info = {
 705     .name          = TYPE_STRONGARM_GPIO,
 706     .parent        = TYPE_SYS_BUS_DEVICE,
 707     .instance_size = sizeof(StrongARMGPIOInfo),
 708     .instance_init = strongarm_gpio_initfn,
 709     .class_init    = strongarm_gpio_class_init,
 710 };
 711
 712 /* Peripheral Pin Controller */
 713 #define PPDR 0x00
 714 #define PPSR 0x04
 715 #define PPAR 0x08
 716 #define PSDR 0x0c
 717 #define PPFR 0x10
 718
 719 #define TYPE_STRONGARM_PPC "strongarm-ppc"
 720 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPPCInfo, STRONGARM_PPC)
 721
 722 struct StrongARMPPCInfo {
 723     SysBusDevice parent_obj;
 724
 725     MemoryRegion iomem;
 726     qemu_irq handler[28];
 727
 728     uint32_t ilevel;
 729     uint32_t olevel;
 730     uint32_t dir;
 731     uint32_t ppar;
 732     uint32_t psdr;
 733     uint32_t ppfr;
 734
 735     uint32_t prev_level;
 736 };
 737
 738 static void strongarm_ppc_set(void *opaque, int line, int level)
 739 {
 740     StrongARMPPCInfo *s = opaque;
 741
 742     if (level) {
 743         s->ilevel |= 1 << line;
 744     } else {
 745         s->ilevel &= ~(1 << line);
 746     }
 747 }
 748
 749 static void strongarm_ppc_handler_update(StrongARMPPCInfo *s)
 750 {
 751     uint32_t level, diff;
 752     int bit;
 753
 754     level = s->olevel & s->dir;
 755
 756     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 757         bit = ctz32(diff);
 758         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 759     }
 760
 761     s->prev_level = level;
 762 }
 763
 764 static uint64_t strongarm_ppc_read(void *opaque, hwaddr offset,
 765                                    unsigned size)
 766 {
 767     StrongARMPPCInfo *s = opaque;
 768
 769     switch (offset) {
 770     case PPDR:        /* PPC Pin Direction registers */
 771         return s->dir | ~0x3fffff;
 772
 773     case PPSR:        /* PPC Pin State registers */
 774         return (s->olevel & s->dir) |
 775                (s->ilevel & ~s->dir) |
 776                ~0x3fffff;
 777
 778     case PPAR:
 779         return s->ppar | ~0x41000;
 780
 781     case PSDR:
 782         return s->psdr;
 783
 784     case PPFR:
 785         return s->ppfr | ~0x7f001;
 786
 787     default:
 788         qemu_log_mask(LOG_GUEST_ERROR,
 789                       "%s: Bad ppc read offset 0x"HWADDR_FMT_plx "\n",
 790                       __func__, offset);
 791     }
 792
 793     return 0;
 794 }
 795
 796 static void strongarm_ppc_write(void *opaque, hwaddr offset,
 797                                 uint64_t value, unsigned size)
 798 {
 799     StrongARMPPCInfo *s = opaque;
 800
 801     switch (offset) {
 802     case PPDR:        /* PPC Pin Direction registers */
 803         s->dir = value & 0x3fffff;
 804         strongarm_ppc_handler_update(s);
 805         break;
 806
 807     case PPSR:        /* PPC Pin State registers */
 808         s->olevel = value & s->dir & 0x3fffff;
 809         strongarm_ppc_handler_update(s);
 810         break;
 811
 812     case PPAR:
 813         s->ppar = value & 0x41000;
 814         break;
 815
 816     case PSDR:
 817         s->psdr = value & 0x3fffff;
 818         break;
 819
 820     case PPFR:
 821         s->ppfr = value & 0x7f001;
 822         break;
 823
 824     default:
 825         qemu_log_mask(LOG_GUEST_ERROR,
 826                       "%s: Bad ppc write offset 0x"HWADDR_FMT_plx"\n",
 827                       __func__, offset);
 828     }
 829 }
 830
 831 static const MemoryRegionOps strongarm_ppc_ops = {
 832     .read = strongarm_ppc_read,
 833     .write = strongarm_ppc_write,
 834     .endianness = DEVICE_NATIVE_ENDIAN,
 835 };
 836
 837 static void strongarm_ppc_init(Object *obj)
 838 {
 839     DeviceState *dev = DEVICE(obj);
 840     StrongARMPPCInfo *s = STRONGARM_PPC(obj);
 841     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 842
 843     qdev_init_gpio_in(dev, strongarm_ppc_set, 22);
 844     qdev_init_gpio_out(dev, s->handler, 22);
 845
 846     memory_region_init_io(&s->iomem, obj, &strongarm_ppc_ops, s,
 847                           "ppc", 0x1000);
 848
 849     sysbus_init_mmio(sbd, &s->iomem);
 850 }
 851
 852 static const VMStateDescription vmstate_strongarm_ppc_regs = {
 853     .name = "strongarm-ppc",
 854     .version_id = 0,
 855     .minimum_version_id = 0,
 856     .fields = (const VMStateField[]) {
 857         VMSTATE_UINT32(ilevel, StrongARMPPCInfo),
 858         VMSTATE_UINT32(olevel, StrongARMPPCInfo),
 859         VMSTATE_UINT32(dir, StrongARMPPCInfo),
 860         VMSTATE_UINT32(ppar, StrongARMPPCInfo),
 861         VMSTATE_UINT32(psdr, StrongARMPPCInfo),
 862         VMSTATE_UINT32(ppfr, StrongARMPPCInfo),
 863         VMSTATE_UINT32(prev_level, StrongARMPPCInfo),
 864         VMSTATE_END_OF_LIST(),
 865     },
 866 };
 867
 868 static void strongarm_ppc_class_init(ObjectClass *klass, void *data)
 869 {
 870     DeviceClass *dc = DEVICE_CLASS(klass);
 871
 872     dc->desc = "StrongARM PPC controller";
 873     dc->vmsd = &vmstate_strongarm_ppc_regs;
 874 }
 875
 876 static const TypeInfo strongarm_ppc_info = {
 877     .name          = TYPE_STRONGARM_PPC,
 878     .parent        = TYPE_SYS_BUS_DEVICE,
 879     .instance_size = sizeof(StrongARMPPCInfo),
 880     .instance_init = strongarm_ppc_init,
 881     .class_init    = strongarm_ppc_class_init,
 882 };
 883
 884 /* UART Ports */
 885 #define UTCR0 0x00
 886 #define UTCR1 0x04
 887 #define UTCR2 0x08
 888 #define UTCR3 0x0c
 889 #define UTDR  0x14
 890 #define UTSR0 0x1c
 891 #define UTSR1 0x20
 892
 893 #define UTCR0_PE  (1 << 0) /* Parity enable */
 894 #define UTCR0_OES (1 << 1) /* Even parity */
 895 #define UTCR0_SBS (1 << 2) /* 2 stop bits */
 896 #define UTCR0_DSS (1 << 3) /* 8-bit data */
 897
 898 #define UTCR3_RXE (1 << 0) /* Rx enable */
 899 #define UTCR3_TXE (1 << 1) /* Tx enable */
 900 #define UTCR3_BRK (1 << 2) /* Force Break */
 901 #define UTCR3_RIE (1 << 3) /* Rx int enable */
 902 #define UTCR3_TIE (1 << 4) /* Tx int enable */
 903 #define UTCR3_LBM (1 << 5) /* Loopback */
 904
 905 #define UTSR0_TFS (1 << 0) /* Tx FIFO nearly empty */
 906 #define UTSR0_RFS (1 << 1) /* Rx FIFO nearly full */
 907 #define UTSR0_RID (1 << 2) /* Receiver Idle */
 908 #define UTSR0_RBB (1 << 3) /* Receiver begin break */
 909 #define UTSR0_REB (1 << 4) /* Receiver end break */
 910 #define UTSR0_EIF (1 << 5) /* Error in FIFO */
 911
 912 #define UTSR1_RNE (1 << 1) /* Receive FIFO not empty */
 913 #define UTSR1_TNF (1 << 2) /* Transmit FIFO not full */
 914 #define UTSR1_PRE (1 << 3) /* Parity error */
 915 #define UTSR1_FRE (1 << 4) /* Frame error */
 916 #define UTSR1_ROR (1 << 5) /* Receive Over Run */
 917
 918 #define RX_FIFO_PRE (1 << 8)
 919 #define RX_FIFO_FRE (1 << 9)
 920 #define RX_FIFO_ROR (1 << 10)
 921
 922 #define TYPE_STRONGARM_UART "strongarm-uart"
 923 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMUARTState, STRONGARM_UART)
 924
 925 struct StrongARMUARTState {
 926     SysBusDevice parent_obj;
 927
 928     MemoryRegion iomem;
 929     CharBackend chr;
 930     qemu_irq irq;
 931
 932     uint8_t utcr0;
 933     uint16_t brd;
 934     uint8_t utcr3;
 935     uint8_t utsr0;
 936     uint8_t utsr1;
 937
 938     uint8_t tx_fifo[8];
 939     uint8_t tx_start;
 940     uint8_t tx_len;
 941     uint16_t rx_fifo[12]; /* value + error flags in high bits */
 942     uint8_t rx_start;
 943     uint8_t rx_len;
 944
 945     uint64_t char_transmit_time; /* time to transmit a char in nanoseconds */
 946     bool wait_break_end;
 947     QEMUTimer *rx_timeout_timer;
 948     QEMUTimer *tx_timer;
 949 };
 950
 951 static void strongarm_uart_update_status(StrongARMUARTState *s)
 952 {
 953     uint16_t utsr1 = 0;
 954
 955     if (s->tx_len != 8) {
 956         utsr1 |= UTSR1_TNF;
 957     }
 958
 959     if (s->rx_len != 0) {
 960         uint16_t ent = s->rx_fifo[s->rx_start];
 961
 962         utsr1 |= UTSR1_RNE;
 963         if (ent & RX_FIFO_PRE) {
 964             s->utsr1 |= UTSR1_PRE;
 965         }
 966         if (ent & RX_FIFO_FRE) {
 967             s->utsr1 |= UTSR1_FRE;
 968         }
 969         if (ent & RX_FIFO_ROR) {
 970             s->utsr1 |= UTSR1_ROR;
 971         }
 972     }
 973
 974     s->utsr1 = utsr1;
 975 }
 976
 977 static void strongarm_uart_update_int_status(StrongARMUARTState *s)
 978 {
 979     uint16_t utsr0 = s->utsr0 &
 980             (UTSR0_REB | UTSR0_RBB | UTSR0_RID);
 981     int i;
 982
 983     if ((s->utcr3 & UTCR3_TXE) &&
 984                 (s->utcr3 & UTCR3_TIE) &&
 985                 s->tx_len <= 4) {
 986         utsr0 |= UTSR0_TFS;
 987     }
 988
 989     if ((s->utcr3 & UTCR3_RXE) &&
 990                 (s->utcr3 & UTCR3_RIE) &&
 991                 s->rx_len > 4) {
 992         utsr0 |= UTSR0_RFS;
 993     }
 994
 995     for (i = 0; i < s->rx_len && i < 4; i++)
 996         if (s->rx_fifo[(s->rx_start + i) % 12] & ~0xff) {
 997             utsr0 |= UTSR0_EIF;
 998             break;
 999         }
1000
1001     s->utsr0 = utsr0;
1002     qemu_set_irq(s->irq, utsr0);
1003 }
1004
1005 static void strongarm_uart_update_parameters(StrongARMUARTState *s)
1006 {
1007     int speed, parity, data_bits, stop_bits, frame_size;
1008     QEMUSerialSetParams ssp;
1009
1010     /* Start bit. */
1011     frame_size = 1;
1012     if (s->utcr0 & UTCR0_PE) {
1013         /* Parity bit. */
1014         frame_size++;
1015         if (s->utcr0 & UTCR0_OES) {
1016             parity = 'E';
1017         } else {
1018             parity = 'O';
1019         }
1020     } else {
1021             parity = 'N';
1022     }
1023     if (s->utcr0 & UTCR0_SBS) {
1024         stop_bits = 2;
1025     } else {
1026         stop_bits = 1;
1027     }
1028
1029     data_bits = (s->utcr0 & UTCR0_DSS) ? 8 : 7;
1030     frame_size += data_bits + stop_bits;
1031     speed = 3686400 / 16 / (s->brd + 1);
1032     ssp.speed = speed;
1033     ssp.parity = parity;
1034     ssp.data_bits = data_bits;
1035     ssp.stop_bits = stop_bits;
1036     s->char_transmit_time =  (NANOSECONDS_PER_SECOND / speed) * frame_size;
1037     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
1038
1039     trace_strongarm_uart_update_parameters((s->chr.chr ?
1040                                            s->chr.chr->label : "NULL") ?:
1041                                            "NULL",
1042                                            speed,
1043                                            parity,
1044                                            data_bits,
1045                                            stop_bits);
1046 }
1047
1048 static void strongarm_uart_rx_to(void *opaque)
1049 {
1050     StrongARMUARTState *s = opaque;
1051
1052     if (s->rx_len) {
1053         s->utsr0 |= UTSR0_RID;
1054         strongarm_uart_update_int_status(s);
1055     }
1056 }
1057
1058 static void strongarm_uart_rx_push(StrongARMUARTState *s, uint16_t c)
1059 {
1060     if ((s->utcr3 & UTCR3_RXE) == 0) {
1061         /* rx disabled */
1062         return;
1063     }
1064
1065     if (s->wait_break_end) {
1066         s->utsr0 |= UTSR0_REB;
1067         s->wait_break_end = false;
1068     }
1069
1070     if (s->rx_len < 12) {
1071         s->rx_fifo[(s->rx_start + s->rx_len) % 12] = c;
1072         s->rx_len++;
1073     } else
1074         s->rx_fifo[(s->rx_start + 11) % 12] |= RX_FIFO_ROR;
1075 }
1076
1077 static int strongarm_uart_can_receive(void *opaque)
1078 {
1079     StrongARMUARTState *s = opaque;
1080
1081     if (s->rx_len == 12) {
1082         return 0;
1083     }
1084     /* It's best not to get more than 2/3 of RX FIFO, so advertise that much */
1085     if (s->rx_len < 8) {
1086         return 8 - s->rx_len;
1087     }
1088     return 1;
1089 }
1090
1091 static void strongarm_uart_receive(void *opaque, const uint8_t *buf, int size)
1092 {
1093     StrongARMUARTState *s = opaque;
1094     int i;
1095
1096     for (i = 0; i < size; i++) {
1097         strongarm_uart_rx_push(s, buf[i]);
1098     }
1099
1100     /* call the timeout receive callback in 3 char transmit time */
1101     timer_mod(s->rx_timeout_timer,
1102                     qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1103
1104     strongarm_uart_update_status(s);
1105     strongarm_uart_update_int_status(s);
1106 }
1107
1108 static void strongarm_uart_event(void *opaque, QEMUChrEvent event)
1109 {
1110     StrongARMUARTState *s = opaque;
1111     if (event == CHR_EVENT_BREAK) {
1112         s->utsr0 |= UTSR0_RBB;
1113         strongarm_uart_rx_push(s, RX_FIFO_FRE);
1114         s->wait_break_end = true;
1115         strongarm_uart_update_status(s);
1116         strongarm_uart_update_int_status(s);
1117     }
1118 }
1119
1120 static void strongarm_uart_tx(void *opaque)
1121 {
1122     StrongARMUARTState *s = opaque;
1123     uint64_t new_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
1124
1125     if (s->utcr3 & UTCR3_LBM) /* loopback */ {
1126         strongarm_uart_receive(s, &s->tx_fifo[s->tx_start], 1);
1127     } else if (qemu_chr_fe_backend_connected(&s->chr)) {
1128         /* XXX this blocks entire thread. Rewrite to use
1129          * qemu_chr_fe_write and background I/O callbacks */
1130         qemu_chr_fe_write_all(&s->chr, &s->tx_fifo[s->tx_start], 1);
1131     }
1132
1133     s->tx_start = (s->tx_start + 1) % 8;
1134     s->tx_len--;
1135     if (s->tx_len) {
1136         timer_mod(s->tx_timer, new_xmit_ts + s->char_transmit_time);
1137     }
1138     strongarm_uart_update_status(s);
1139     strongarm_uart_update_int_status(s);
1140 }
1141
1142 static uint64_t strongarm_uart_read(void *opaque, hwaddr addr,
1143                                     unsigned size)
1144 {
1145     StrongARMUARTState *s = opaque;
1146     uint16_t ret;
1147
1148     switch (addr) {
1149     case UTCR0:
1150         return s->utcr0;
1151
1152     case UTCR1:
1153         return s->brd >> 8;
1154
1155     case UTCR2:
1156         return s->brd & 0xff;
1157
1158     case UTCR3:
1159         return s->utcr3;
1160
1161     case UTDR:
1162         if (s->rx_len != 0) {
1163             ret = s->rx_fifo[s->rx_start];
1164             s->rx_start = (s->rx_start + 1) % 12;
1165             s->rx_len--;
1166             strongarm_uart_update_status(s);
1167             strongarm_uart_update_int_status(s);
1168             return ret;
1169         }
1170         return 0;
1171
1172     case UTSR0:
1173         return s->utsr0;
1174
1175     case UTSR1:
1176         return s->utsr1;
1177
1178     default:
1179         qemu_log_mask(LOG_GUEST_ERROR,
1180                       "%s: Bad uart register read 0x"HWADDR_FMT_plx"\n",
1181                       __func__, addr);
1182         return 0;
1183     }
1184 }
1185
1186 static void strongarm_uart_write(void *opaque, hwaddr addr,
1187                                  uint64_t value, unsigned size)
1188 {
1189     StrongARMUARTState *s = opaque;
1190
1191     switch (addr) {
1192     case UTCR0:
1193         s->utcr0 = value & 0x7f;
1194         strongarm_uart_update_parameters(s);
1195         break;
1196
1197     case UTCR1:
1198         s->brd = (s->brd & 0xff) | ((value & 0xf) << 8);
1199         strongarm_uart_update_parameters(s);
1200         break;
1201
1202     case UTCR2:
1203         s->brd = (s->brd & 0xf00) | (value & 0xff);
1204         strongarm_uart_update_parameters(s);
1205         break;
1206
1207     case UTCR3:
1208         s->utcr3 = value & 0x3f;
1209         if ((s->utcr3 & UTCR3_RXE) == 0) {
1210             s->rx_len = 0;
1211         }
1212         if ((s->utcr3 & UTCR3_TXE) == 0) {
1213             s->tx_len = 0;
1214         }
1215         strongarm_uart_update_status(s);
1216         strongarm_uart_update_int_status(s);
1217         break;
1218
1219     case UTDR:
1220         if ((s->utcr3 & UTCR3_TXE) && s->tx_len != 8) {
1221             s->tx_fifo[(s->tx_start + s->tx_len) % 8] = value;
1222             s->tx_len++;
1223             strongarm_uart_update_status(s);
1224             strongarm_uart_update_int_status(s);
1225             if (s->tx_len == 1) {
1226                 strongarm_uart_tx(s);
1227             }
1228         }
1229         break;
1230
1231     case UTSR0:
1232         s->utsr0 = s->utsr0 & ~(value &
1233                 (UTSR0_REB | UTSR0_RBB | UTSR0_RID));
1234         strongarm_uart_update_int_status(s);
1235         break;
1236
1237     default:
1238         qemu_log_mask(LOG_GUEST_ERROR,
1239                       "%s: Bad uart register write 0x"HWADDR_FMT_plx"\n",
1240                       __func__, addr);
1241     }
1242 }
1243
1244 static const MemoryRegionOps strongarm_uart_ops = {
1245     .read = strongarm_uart_read,
1246     .write = strongarm_uart_write,
1247     .endianness = DEVICE_NATIVE_ENDIAN,
1248 };
1249
1250 static void strongarm_uart_init(Object *obj)
1251 {
1252     StrongARMUARTState *s = STRONGARM_UART(obj);
1253     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
1254
1255     memory_region_init_io(&s->iomem, obj, &strongarm_uart_ops, s,
1256                           "uart", 0x10000);
1257     sysbus_init_mmio(dev, &s->iomem);
1258     sysbus_init_irq(dev, &s->irq);
1259 }
1260
1261 static void strongarm_uart_realize(DeviceState *dev, Error **errp)
1262 {
1263     StrongARMUARTState *s = STRONGARM_UART(dev);
1264
1265     s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
1266                                        strongarm_uart_rx_to,
1267                                        s);
1268     s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s);
1269     qemu_chr_fe_set_handlers(&s->chr,
1270                              strongarm_uart_can_receive,
1271                              strongarm_uart_receive,
1272                              strongarm_uart_event,
1273                              NULL, s, NULL, true);
1274 }
1275
1276 static void strongarm_uart_reset(DeviceState *dev)
1277 {
1278     StrongARMUARTState *s = STRONGARM_UART(dev);
1279
1280     s->utcr0 = UTCR0_DSS; /* 8 data, no parity */
1281     s->brd = 23;    /* 9600 */
1282     /* enable send & recv - this actually violates spec */
1283     s->utcr3 = UTCR3_TXE | UTCR3_RXE;
1284
1285     s->rx_len = s->tx_len = 0;
1286
1287     strongarm_uart_update_parameters(s);
1288     strongarm_uart_update_status(s);
1289     strongarm_uart_update_int_status(s);
1290 }
1291
1292 static int strongarm_uart_post_load(void *opaque, int version_id)
1293 {
1294     StrongARMUARTState *s = opaque;
1295
1296     strongarm_uart_update_parameters(s);
1297     strongarm_uart_update_status(s);
1298     strongarm_uart_update_int_status(s);
1299
1300     /* tx and restart timer */
1301     if (s->tx_len) {
1302         strongarm_uart_tx(s);
1303     }
1304
1305     /* restart rx timeout timer */
1306     if (s->rx_len) {
1307         timer_mod(s->rx_timeout_timer,
1308                 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1309     }
1310
1311     return 0;
1312 }
1313
1314 static const VMStateDescription vmstate_strongarm_uart_regs = {
1315     .name = "strongarm-uart",
1316     .version_id = 0,
1317     .minimum_version_id = 0,
1318     .post_load = strongarm_uart_post_load,
1319     .fields = (const VMStateField[]) {
1320         VMSTATE_UINT8(utcr0, StrongARMUARTState),
1321         VMSTATE_UINT16(brd, StrongARMUARTState),
1322         VMSTATE_UINT8(utcr3, StrongARMUARTState),
1323         VMSTATE_UINT8(utsr0, StrongARMUARTState),
1324         VMSTATE_UINT8_ARRAY(tx_fifo, StrongARMUARTState, 8),
1325         VMSTATE_UINT8(tx_start, StrongARMUARTState),
1326         VMSTATE_UINT8(tx_len, StrongARMUARTState),
1327         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMUARTState, 12),
1328         VMSTATE_UINT8(rx_start, StrongARMUARTState),
1329         VMSTATE_UINT8(rx_len, StrongARMUARTState),
1330         VMSTATE_BOOL(wait_break_end, StrongARMUARTState),
1331         VMSTATE_END_OF_LIST(),
1332     },
1333 };
1334
1335 static Property strongarm_uart_properties[] = {
1336     DEFINE_PROP_CHR("chardev", StrongARMUARTState, chr),
1337     DEFINE_PROP_END_OF_LIST(),
1338 };
1339
1340 static void strongarm_uart_class_init(ObjectClass *klass, void *data)
1341 {
1342     DeviceClass *dc = DEVICE_CLASS(klass);
1343
1344     dc->desc = "StrongARM UART controller";
1345     device_class_set_legacy_reset(dc, strongarm_uart_reset);
1346     dc->vmsd = &vmstate_strongarm_uart_regs;
1347     device_class_set_props(dc, strongarm_uart_properties);
1348     dc->realize = strongarm_uart_realize;
1349 }
1350
1351 static const TypeInfo strongarm_uart_info = {
1352     .name          = TYPE_STRONGARM_UART,
1353     .parent        = TYPE_SYS_BUS_DEVICE,
1354     .instance_size = sizeof(StrongARMUARTState),
1355     .instance_init = strongarm_uart_init,
1356     .class_init    = strongarm_uart_class_init,
1357 };
1358
1359 /* Synchronous Serial Ports */
1360
1361 #define TYPE_STRONGARM_SSP "strongarm-ssp"
1362 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMSSPState, STRONGARM_SSP)
1363
1364 struct StrongARMSSPState {
1365     SysBusDevice parent_obj;
1366
1367     MemoryRegion iomem;
1368     qemu_irq irq;
1369     SSIBus *bus;
1370
1371     uint16_t sscr[2];
1372     uint16_t sssr;
1373
1374     uint16_t rx_fifo[8];
1375     uint8_t rx_level;
1376     uint8_t rx_start;
1377 };
1378
1379 #define SSCR0 0x60 /* SSP Control register 0 */
1380 #define SSCR1 0x64 /* SSP Control register 1 */
1381 #define SSDR  0x6c /* SSP Data register */
1382 #define SSSR  0x74 /* SSP Status register */
1383
1384 /* Bitfields for above registers */
1385 #define SSCR0_SPI(x)    (((x) & 0x30) == 0x00)
1386 #define SSCR0_SSP(x)    (((x) & 0x30) == 0x10)
1387 #define SSCR0_UWIRE(x)  (((x) & 0x30) == 0x20)
1388 #define SSCR0_PSP(x)    (((x) & 0x30) == 0x30)
1389 #define SSCR0_SSE       (1 << 7)
1390 #define SSCR0_DSS(x)    (((x) & 0xf) + 1)
1391 #define SSCR1_RIE       (1 << 0)
1392 #define SSCR1_TIE       (1 << 1)
1393 #define SSCR1_LBM       (1 << 2)
1394 #define SSSR_TNF        (1 << 2)
1395 #define SSSR_RNE        (1 << 3)
1396 #define SSSR_TFS        (1 << 5)
1397 #define SSSR_RFS        (1 << 6)
1398 #define SSSR_ROR        (1 << 7)
1399 #define SSSR_RW         0x0080
1400
1401 static void strongarm_ssp_int_update(StrongARMSSPState *s)
1402 {
1403     int level = 0;
1404
1405     level |= (s->sssr & SSSR_ROR);
1406     level |= (s->sssr & SSSR_RFS)  &&  (s->sscr[1] & SSCR1_RIE);
1407     level |= (s->sssr & SSSR_TFS)  &&  (s->sscr[1] & SSCR1_TIE);
1408     qemu_set_irq(s->irq, level);
1409 }
1410
1411 static void strongarm_ssp_fifo_update(StrongARMSSPState *s)
1412 {
1413     s->sssr &= ~SSSR_TFS;
1414     s->sssr &= ~SSSR_TNF;
1415     if (s->sscr[0] & SSCR0_SSE) {
1416         if (s->rx_level >= 4) {
1417             s->sssr |= SSSR_RFS;
1418         } else {
1419             s->sssr &= ~SSSR_RFS;
1420         }
1421         if (s->rx_level) {
1422             s->sssr |= SSSR_RNE;
1423         } else {
1424             s->sssr &= ~SSSR_RNE;
1425         }
1426         /* TX FIFO is never filled, so it is always in underrun
1427            condition if SSP is enabled */
1428         s->sssr |= SSSR_TFS;
1429         s->sssr |= SSSR_TNF;
1430     }
1431
1432     strongarm_ssp_int_update(s);
1433 }
1434
1435 static uint64_t strongarm_ssp_read(void *opaque, hwaddr addr,
1436                                    unsigned size)
1437 {
1438     StrongARMSSPState *s = opaque;
1439     uint32_t retval;
1440
1441     switch (addr) {
1442     case SSCR0:
1443         return s->sscr[0];
1444     case SSCR1:
1445         return s->sscr[1];
1446     case SSSR:
1447         return s->sssr;
1448     case SSDR:
1449         if (~s->sscr[0] & SSCR0_SSE) {
1450             return 0xffffffff;
1451         }
1452         if (s->rx_level < 1) {
1453             trace_strongarm_ssp_read_underrun();
1454             return 0xffffffff;
1455         }
1456         s->rx_level--;
1457         retval = s->rx_fifo[s->rx_start++];
1458         s->rx_start &= 0x7;
1459         strongarm_ssp_fifo_update(s);
1460         return retval;
1461     default:
1462         qemu_log_mask(LOG_GUEST_ERROR,
1463                       "%s: Bad ssp register read 0x"HWADDR_FMT_plx"\n",
1464                       __func__, addr);
1465         break;
1466     }
1467     return 0;
1468 }
1469
1470 static void strongarm_ssp_write(void *opaque, hwaddr addr,
1471                                 uint64_t value, unsigned size)
1472 {
1473     StrongARMSSPState *s = opaque;
1474
1475     switch (addr) {
1476     case SSCR0:
1477         s->sscr[0] = value & 0xffbf;
1478         if ((s->sscr[0] & SSCR0_SSE) && SSCR0_DSS(value) < 4) {
1479             qemu_log_mask(LOG_GUEST_ERROR, "%s: Wrong data size: %i bits\n",
1480                           __func__, (int)SSCR0_DSS(value));
1481         }
1482         if (!(value & SSCR0_SSE)) {
1483             s->sssr = 0;
1484             s->rx_level = 0;
1485         }
1486         strongarm_ssp_fifo_update(s);
1487         break;
1488
1489     case SSCR1:
1490         s->sscr[1] = value & 0x2f;
1491         if (value & SSCR1_LBM) {
1492             qemu_log_mask(LOG_GUEST_ERROR,
1493                           "%s: Attempt to use SSP LBM mode\n",
1494                           __func__);
1495         }
1496         strongarm_ssp_fifo_update(s);
1497         break;
1498
1499     case SSSR:
1500         s->sssr &= ~(value & SSSR_RW);
1501         strongarm_ssp_int_update(s);
1502         break;
1503
1504     case SSDR:
1505         if (SSCR0_UWIRE(s->sscr[0])) {
1506             value &= 0xff;
1507         } else
1508             /* Note how 32bits overflow does no harm here */
1509             value &= (1 << SSCR0_DSS(s->sscr[0])) - 1;
1510
1511         /* Data goes from here to the Tx FIFO and is shifted out from
1512          * there directly to the slave, no need to buffer it.
1513          */
1514         if (s->sscr[0] & SSCR0_SSE) {
1515             uint32_t readval;
1516             if (s->sscr[1] & SSCR1_LBM) {
1517                 readval = value;
1518             } else {
1519                 readval = ssi_transfer(s->bus, value);
1520             }
1521
1522             if (s->rx_level < 0x08) {
1523                 s->rx_fifo[(s->rx_start + s->rx_level++) & 0x7] = readval;
1524             } else {
1525                 s->sssr |= SSSR_ROR;
1526             }
1527         }
1528         strongarm_ssp_fifo_update(s);
1529         break;
1530
1531     default:
1532         qemu_log_mask(LOG_GUEST_ERROR,
1533                       "%s: Bad ssp register write 0x"HWADDR_FMT_plx"\n",
1534                       __func__,  addr);
1535         break;
1536     }
1537 }
1538
1539 static const MemoryRegionOps strongarm_ssp_ops = {
1540     .read = strongarm_ssp_read,
1541     .write = strongarm_ssp_write,
1542     .endianness = DEVICE_NATIVE_ENDIAN,
1543 };
1544
1545 static int strongarm_ssp_post_load(void *opaque, int version_id)
1546 {
1547     StrongARMSSPState *s = opaque;
1548
1549     strongarm_ssp_fifo_update(s);
1550
1551     return 0;
1552 }
1553
1554 static void strongarm_ssp_init(Object *obj)
1555 {
1556     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1557     DeviceState *dev = DEVICE(sbd);
1558     StrongARMSSPState *s = STRONGARM_SSP(dev);
1559
1560     sysbus_init_irq(sbd, &s->irq);
1561
1562     memory_region_init_io(&s->iomem, obj, &strongarm_ssp_ops, s,
1563                           "ssp", 0x1000);
1564     sysbus_init_mmio(sbd, &s->iomem);
1565
1566     s->bus = ssi_create_bus(dev, "ssi");
1567 }
1568
1569 static void strongarm_ssp_reset(DeviceState *dev)
1570 {
1571     StrongARMSSPState *s = STRONGARM_SSP(dev);
1572
1573     s->sssr = 0x03; /* 3 bit data, SPI, disabled */
1574     s->rx_start = 0;
1575     s->rx_level = 0;
1576 }
1577
1578 static const VMStateDescription vmstate_strongarm_ssp_regs = {
1579     .name = "strongarm-ssp",
1580     .version_id = 0,
1581     .minimum_version_id = 0,
1582     .post_load = strongarm_ssp_post_load,
1583     .fields = (const VMStateField[]) {
1584         VMSTATE_UINT16_ARRAY(sscr, StrongARMSSPState, 2),
1585         VMSTATE_UINT16(sssr, StrongARMSSPState),
1586         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMSSPState, 8),
1587         VMSTATE_UINT8(rx_start, StrongARMSSPState),
1588         VMSTATE_UINT8(rx_level, StrongARMSSPState),
1589         VMSTATE_END_OF_LIST(),
1590     },
1591 };
1592
1593 static void strongarm_ssp_class_init(ObjectClass *klass, void *data)
1594 {
1595     DeviceClass *dc = DEVICE_CLASS(klass);
1596
1597     dc->desc = "StrongARM SSP controller";
1598     device_class_set_legacy_reset(dc, strongarm_ssp_reset);
1599     dc->vmsd = &vmstate_strongarm_ssp_regs;
1600 }
1601
1602 static const TypeInfo strongarm_ssp_info = {
1603     .name          = TYPE_STRONGARM_SSP,
1604     .parent        = TYPE_SYS_BUS_DEVICE,
1605     .instance_size = sizeof(StrongARMSSPState),
1606     .instance_init = strongarm_ssp_init,
1607     .class_init    = strongarm_ssp_class_init,
1608 };
1609
1610 /* Main CPU functions */
1611 StrongARMState *sa1110_init(const char *cpu_type)
1612 {
1613     StrongARMState *s;
1614     int i;
1615
1616     s = g_new0(StrongARMState, 1);
1617
1618     if (strncmp(cpu_type, "sa1110", 6)) {
1619         error_report("Machine requires a SA1110 processor.");
1620         exit(1);
1621     }
1622
1623     s->cpu = ARM_CPU(cpu_create(cpu_type));
1624
1625     s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000,
1626                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ),
1627                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ),
1628                     NULL);
1629
1630     sysbus_create_varargs("pxa25x-timer", 0x90000000,
1631                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC0),
1632                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC1),
1633                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC2),
1634                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC3),
1635                     NULL);
1636
1637     sysbus_create_simple(TYPE_STRONGARM_RTC, 0x90010000,
1638                     qdev_get_gpio_in(s->pic, SA_PIC_RTC_ALARM));
1639
1640     s->gpio = strongarm_gpio_init(0x90040000, s->pic);
1641
1642     s->ppc = sysbus_create_varargs(TYPE_STRONGARM_PPC, 0x90060000, NULL);
1643
1644     for (i = 0; sa_serial[i].io_base; i++) {
1645         DeviceState *dev = qdev_new(TYPE_STRONGARM_UART);
1646         qdev_prop_set_chr(dev, "chardev", serial_hd(i));
1647         sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
1648         sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0,
1649                 sa_serial[i].io_base);
1650         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
1651                 qdev_get_gpio_in(s->pic, sa_serial[i].irq));
1652     }
1653
1654     s->ssp = sysbus_create_varargs(TYPE_STRONGARM_SSP, 0x80070000,
1655                 qdev_get_gpio_in(s->pic, SA_PIC_SSP), NULL);
1656     s->ssp_bus = (SSIBus *)qdev_get_child_bus(s->ssp, "ssi");
1657
1658     return s;
1659 }
1660
1661 static void strongarm_register_types(void)
1662 {
1663     type_register_static(&strongarm_pic_info);
1664     type_register_static(&strongarm_rtc_sysbus_info);
1665     type_register_static(&strongarm_gpio_info);
1666     type_register_static(&strongarm_ppc_info);
1667     type_register_static(&strongarm_uart_info);
1668     type_register_static(&strongarm_ssp_info);
1669 }
1670
1671 type_init(strongarm_register_types)