2 * NetBSD header file, copied from
3 * http://gitorious.org/freebsd/freebsd/blobs/HEAD/sys/dev/mfi/mfireg.h
6 * Copyright (c) 2006 IronPort Systems
7 * Copyright (c) 2007 LSI Corp.
8 * Copyright (c) 2007 Rajesh Prabhakaran.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * MegaRAID SAS MFI firmware definitions
41 * Start with the register set. All registers are 32 bits wide.
42 * The usual Intel IOP style setup.
44 #define MFI_IMSG0 0x10 /* Inbound message 0 */
45 #define MFI_IMSG1 0x14 /* Inbound message 1 */
46 #define MFI_OMSG0 0x18 /* Outbound message 0 */
47 #define MFI_OMSG1 0x1c /* Outbound message 1 */
48 #define MFI_IDB 0x20 /* Inbound doorbell */
49 #define MFI_ISTS 0x24 /* Inbound interrupt status */
50 #define MFI_IMSK 0x28 /* Inbound interrupt mask */
51 #define MFI_ODB 0x2c /* Outbound doorbell */
52 #define MFI_OSTS 0x30 /* Outbound interrupt status */
53 #define MFI_OMSK 0x34 /* Outbound interrupt mask */
54 #define MFI_IQP 0x40 /* Inbound queue port */
55 #define MFI_OQP 0x44 /* Outbound queue port */
58 * 1078 specific related register
60 #define MFI_ODR0 0x9c /* outbound doorbell register0 */
61 #define MFI_ODCR0 0xa0 /* outbound doorbell clear register0 */
62 #define MFI_OSP0 0xb0 /* outbound scratch pad0 */
63 #define MFI_OSP1 0xb4 /* outbound scratch pad1 */
64 #define MFI_IQPL 0xc0 /* Inbound queue port (low bytes) */
65 #define MFI_IQPH 0xc4 /* Inbound queue port (high bytes) */
66 #define MFI_DIAG 0xf8 /* Host diag */
67 #define MFI_SEQ 0xfc /* Sequencer offset */
68 #define MFI_1078_EIM 0x80000004 /* 1078 enable interrupt mask */
69 #define MFI_RMI 0x2 /* reply message interrupt */
70 #define MFI_1078_RM 0x80000000 /* reply 1078 message interrupt */
71 #define MFI_ODC 0x4 /* outbound doorbell change interrupt */
74 * gen2 specific changes
76 #define MFI_GEN2_EIM 0x00000005 /* gen2 enable interrupt mask */
77 #define MFI_GEN2_RM 0x00000001 /* reply gen2 message interrupt */
80 * skinny specific changes
82 #define MFI_SKINNY_IDB 0x00 /* Inbound doorbell is at 0x00 for skinny */
83 #define MFI_SKINNY_RM 0x00000001 /* reply skinny message interrupt */
85 /* Bits for MFI_OSTS */
86 #define MFI_OSTS_INTR_VALID 0x00000002
89 * Firmware state values. Found in OMSG0 during initialization.
91 #define MFI_FWSTATE_MASK 0xf0000000
92 #define MFI_FWSTATE_UNDEFINED 0x00000000
93 #define MFI_FWSTATE_BB_INIT 0x10000000
94 #define MFI_FWSTATE_FW_INIT 0x40000000
95 #define MFI_FWSTATE_WAIT_HANDSHAKE 0x60000000
96 #define MFI_FWSTATE_FW_INIT_2 0x70000000
97 #define MFI_FWSTATE_DEVICE_SCAN 0x80000000
98 #define MFI_FWSTATE_BOOT_MSG_PENDING 0x90000000
99 #define MFI_FWSTATE_FLUSH_CACHE 0xa0000000
100 #define MFI_FWSTATE_READY 0xb0000000
101 #define MFI_FWSTATE_OPERATIONAL 0xc0000000
102 #define MFI_FWSTATE_FAULT 0xf0000000
103 #define MFI_FWSTATE_MAXSGL_MASK 0x00ff0000
104 #define MFI_FWSTATE_MAXCMD_MASK 0x0000ffff
105 #define MFI_FWSTATE_MSIX_SUPPORTED 0x04000000
106 #define MFI_FWSTATE_HOSTMEMREQD_MASK 0x08000000
109 * Control bits to drive the card to ready state. These go into the IDB
112 #define MFI_FWINIT_ABORT 0x00000001 /* Abort all pending commands */
113 #define MFI_FWINIT_READY 0x00000002 /* Move from operational to ready */
114 #define MFI_FWINIT_MFIMODE 0x00000004 /* unknown */
115 #define MFI_FWINIT_CLEAR_HANDSHAKE 0x00000008 /* Respond to WAIT_HANDSHAKE */
116 #define MFI_FWINIT_HOTPLUG 0x00000010
117 #define MFI_FWINIT_STOP_ADP 0x00000020 /* Move to operational, stop */
118 #define MFI_FWINIT_ADP_RESET 0x00000040 /* Reset ADP */
121 * Control bits for the DIAG register
123 #define MFI_DIAG_WRITE_ENABLE 0x00000080
124 #define MFI_DIAG_RESET_ADP 0x00000004
139 /* Direct commands */
141 MFI_DCMD_CTRL_MFI_HOST_MEM_ALLOC
= 0x0100e100,
142 MFI_DCMD_CTRL_GET_INFO
= 0x01010000,
143 MFI_DCMD_CTRL_GET_PROPERTIES
= 0x01020100,
144 MFI_DCMD_CTRL_SET_PROPERTIES
= 0x01020200,
145 MFI_DCMD_CTRL_ALARM
= 0x01030000,
146 MFI_DCMD_CTRL_ALARM_GET
= 0x01030100,
147 MFI_DCMD_CTRL_ALARM_ENABLE
= 0x01030200,
148 MFI_DCMD_CTRL_ALARM_DISABLE
= 0x01030300,
149 MFI_DCMD_CTRL_ALARM_SILENCE
= 0x01030400,
150 MFI_DCMD_CTRL_ALARM_TEST
= 0x01030500,
151 MFI_DCMD_CTRL_EVENT_GETINFO
= 0x01040100,
152 MFI_DCMD_CTRL_EVENT_CLEAR
= 0x01040200,
153 MFI_DCMD_CTRL_EVENT_GET
= 0x01040300,
154 MFI_DCMD_CTRL_EVENT_COUNT
= 0x01040400,
155 MFI_DCMD_CTRL_EVENT_WAIT
= 0x01040500,
156 MFI_DCMD_CTRL_SHUTDOWN
= 0x01050000,
157 MFI_DCMD_HIBERNATE_STANDBY
= 0x01060000,
158 MFI_DCMD_CTRL_GET_TIME
= 0x01080101,
159 MFI_DCMD_CTRL_SET_TIME
= 0x01080102,
160 MFI_DCMD_CTRL_BIOS_DATA_GET
= 0x010c0100,
161 MFI_DCMD_CTRL_BIOS_DATA_SET
= 0x010c0200,
162 MFI_DCMD_CTRL_FACTORY_DEFAULTS
= 0x010d0000,
163 MFI_DCMD_CTRL_MFC_DEFAULTS_GET
= 0x010e0201,
164 MFI_DCMD_CTRL_MFC_DEFAULTS_SET
= 0x010e0202,
165 MFI_DCMD_CTRL_CACHE_FLUSH
= 0x01101000,
166 MFI_DCMD_PD_GET_LIST
= 0x02010000,
167 MFI_DCMD_PD_LIST_QUERY
= 0x02010100,
168 MFI_DCMD_PD_GET_INFO
= 0x02020000,
169 MFI_DCMD_PD_STATE_SET
= 0x02030100,
170 MFI_DCMD_PD_REBUILD
= 0x02040100,
171 MFI_DCMD_PD_BLINK
= 0x02070100,
172 MFI_DCMD_PD_UNBLINK
= 0x02070200,
173 MFI_DCMD_LD_GET_LIST
= 0x03010000,
174 MFI_DCMD_LD_LIST_QUERY
= 0x03010100,
175 MFI_DCMD_LD_GET_INFO
= 0x03020000,
176 MFI_DCMD_LD_GET_PROP
= 0x03030000,
177 MFI_DCMD_LD_SET_PROP
= 0x03040000,
178 MFI_DCMD_LD_DELETE
= 0x03090000,
179 MFI_DCMD_CFG_READ
= 0x04010000,
180 MFI_DCMD_CFG_ADD
= 0x04020000,
181 MFI_DCMD_CFG_CLEAR
= 0x04030000,
182 MFI_DCMD_CFG_FOREIGN_READ
= 0x04060100,
183 MFI_DCMD_CFG_FOREIGN_IMPORT
= 0x04060400,
184 MFI_DCMD_BBU_STATUS
= 0x05010000,
185 MFI_DCMD_BBU_CAPACITY_INFO
= 0x05020000,
186 MFI_DCMD_BBU_DESIGN_INFO
= 0x05030000,
187 MFI_DCMD_BBU_PROP_GET
= 0x05050100,
188 MFI_DCMD_CLUSTER
= 0x08000000,
189 MFI_DCMD_CLUSTER_RESET_ALL
= 0x08010100,
190 MFI_DCMD_CLUSTER_RESET_LD
= 0x08010200
193 /* Modifiers for MFI_DCMD_CTRL_FLUSHCACHE */
194 #define MFI_FLUSHCACHE_CTRL 0x01
195 #define MFI_FLUSHCACHE_DISK 0x02
197 /* Modifiers for MFI_DCMD_CTRL_SHUTDOWN */
198 #define MFI_SHUTDOWN_SPINDOWN 0x01
204 MFI_FRAME_DONT_POST_IN_REPLY_QUEUE
= 0x0001,
205 MFI_FRAME_SGL64
= 0x0002,
206 MFI_FRAME_SENSE64
= 0x0004,
207 MFI_FRAME_DIR_WRITE
= 0x0008,
208 MFI_FRAME_DIR_READ
= 0x0010,
209 MFI_FRAME_IEEE_SGL
= 0x0020,
212 /* MFI Status codes */
215 MFI_STAT_INVALID_CMD
,
216 MFI_STAT_INVALID_DCMD
,
217 MFI_STAT_INVALID_PARAMETER
,
218 MFI_STAT_INVALID_SEQUENCE_NUMBER
,
219 MFI_STAT_ABORT_NOT_POSSIBLE
,
220 MFI_STAT_APP_HOST_CODE_NOT_FOUND
,
222 MFI_STAT_APP_NOT_INITIALIZED
,
223 MFI_STAT_ARRAY_INDEX_INVALID
,
224 MFI_STAT_ARRAY_ROW_NOT_EMPTY
,
225 MFI_STAT_CONFIG_RESOURCE_CONFLICT
,
226 MFI_STAT_DEVICE_NOT_FOUND
,
227 MFI_STAT_DRIVE_TOO_SMALL
,
228 MFI_STAT_FLASH_ALLOC_FAIL
,
230 MFI_STAT_FLASH_ERROR
= 0x10,
231 MFI_STAT_FLASH_IMAGE_BAD
,
232 MFI_STAT_FLASH_IMAGE_INCOMPLETE
,
233 MFI_STAT_FLASH_NOT_OPEN
,
234 MFI_STAT_FLASH_NOT_STARTED
,
235 MFI_STAT_FLUSH_FAILED
,
236 MFI_STAT_HOST_CODE_NOT_FOUNT
,
237 MFI_STAT_LD_CC_IN_PROGRESS
,
238 MFI_STAT_LD_INIT_IN_PROGRESS
,
239 MFI_STAT_LD_LBA_OUT_OF_RANGE
,
240 MFI_STAT_LD_MAX_CONFIGURED
,
241 MFI_STAT_LD_NOT_OPTIMAL
,
242 MFI_STAT_LD_RBLD_IN_PROGRESS
,
243 MFI_STAT_LD_RECON_IN_PROGRESS
,
244 MFI_STAT_LD_WRONG_RAID_LEVEL
,
245 MFI_STAT_MAX_SPARES_EXCEEDED
,
246 MFI_STAT_MEMORY_NOT_AVAILABLE
= 0x20,
247 MFI_STAT_MFC_HW_ERROR
,
248 MFI_STAT_NO_HW_PRESENT
,
250 MFI_STAT_NOT_IN_ENCL
,
251 MFI_STAT_PD_CLEAR_IN_PROGRESS
,
252 MFI_STAT_PD_TYPE_WRONG
,
253 MFI_STAT_PR_DISABLED
,
254 MFI_STAT_ROW_INDEX_INVALID
,
255 MFI_STAT_SAS_CONFIG_INVALID_ACTION
,
256 MFI_STAT_SAS_CONFIG_INVALID_DATA
,
257 MFI_STAT_SAS_CONFIG_INVALID_PAGE
,
258 MFI_STAT_SAS_CONFIG_INVALID_TYPE
,
259 MFI_STAT_SCSI_DONE_WITH_ERROR
,
260 MFI_STAT_SCSI_IO_FAILED
,
261 MFI_STAT_SCSI_RESERVATION_CONFLICT
,
262 MFI_STAT_SHUTDOWN_FAILED
= 0x30,
263 MFI_STAT_TIME_NOT_SET
,
264 MFI_STAT_WRONG_STATE
,
266 MFI_STAT_PEER_NOTIFICATION_REJECTED
,
267 MFI_STAT_PEER_NOTIFICATION_FAILED
,
268 MFI_STAT_RESERVATION_IN_PROGRESS
,
269 MFI_STAT_I2C_ERRORS_DETECTED
,
270 MFI_STAT_PCI_ERRORS_DETECTED
,
271 MFI_STAT_DIAG_FAILED
,
272 MFI_STAT_BOOT_MSG_PENDING
,
273 MFI_STAT_FOREIGN_CONFIG_INCOMPLETE
,
274 MFI_STAT_INVALID_SGL
,
275 MFI_STAT_UNSUPPORTED_HW
,
276 MFI_STAT_CC_SCHEDULE_DISABLED
,
277 MFI_STAT_PD_COPYBACK_IN_PROGRESS
,
278 MFI_STAT_MULTIPLE_PDS_IN_ARRAY
= 0x40,
279 MFI_STAT_FW_DOWNLOAD_ERROR
,
280 MFI_STAT_FEATURE_SECURITY_NOT_ENABLED
,
281 MFI_STAT_LOCK_KEY_ALREADY_EXISTS
,
282 MFI_STAT_LOCK_KEY_BACKUP_NOT_ALLOWED
,
283 MFI_STAT_LOCK_KEY_VERIFY_NOT_ALLOWED
,
284 MFI_STAT_LOCK_KEY_VERIFY_FAILED
,
285 MFI_STAT_LOCK_KEY_REKEY_NOT_ALLOWED
,
286 MFI_STAT_LOCK_KEY_INVALID
,
287 MFI_STAT_LOCK_KEY_ESCROW_INVALID
,
288 MFI_STAT_LOCK_KEY_BACKUP_REQUIRED
,
289 MFI_STAT_SECURE_LD_EXISTS
,
290 MFI_STAT_LD_SECURE_NOT_ALLOWED
,
291 MFI_STAT_REPROVISION_NOT_ALLOWED
,
292 MFI_STAT_PD_SECURITY_TYPE_WRONG
,
293 MFI_STAT_LD_ENCRYPTION_TYPE_INVALID
,
294 MFI_STAT_CONFIG_FDE_NON_FDE_MIX_NOT_ALLOWED
= 0x50,
295 MFI_STAT_CONFIG_LD_ENCRYPTION_TYPE_MIX_NOT_ALLOWED
,
296 MFI_STAT_SECRET_KEY_NOT_ALLOWED
,
297 MFI_STAT_PD_HW_ERRORS_DETECTED
,
298 MFI_STAT_LD_CACHE_PINNED
,
299 MFI_STAT_POWER_STATE_SET_IN_PROGRESS
,
300 MFI_STAT_POWER_STATE_SET_BUSY
,
301 MFI_STAT_POWER_STATE_WRONG
,
302 MFI_STAT_PR_NO_AVAILABLE_PD_FOUND
,
303 MFI_STAT_CTRL_RESET_REQUIRED
,
304 MFI_STAT_LOCK_KEY_EKM_NO_BOOT_AGENT
,
305 MFI_STAT_SNAP_NO_SPACE
,
306 MFI_STAT_SNAP_PARTIAL_FAILURE
,
307 MFI_STAT_UPGRADE_KEY_INCOMPATIBLE
,
308 MFI_STAT_PFK_INCOMPATIBLE
,
309 MFI_STAT_PD_MAX_UNCONFIGURED
,
310 MFI_STAT_IO_METRICS_DISABLED
= 0x60,
311 MFI_STAT_AEC_NOT_STOPPED
,
312 MFI_STAT_PI_TYPE_WRONG
,
313 MFI_STAT_LD_PD_PI_INCOMPATIBLE
,
314 MFI_STAT_PI_NOT_ENABLED
,
315 MFI_STAT_LD_BLOCK_SIZE_MISMATCH
,
316 MFI_STAT_INVALID_STATUS
= 0xFF
321 MFI_EVT_CLASS_DEBUG
= -2,
322 MFI_EVT_CLASS_PROGRESS
= -1,
323 MFI_EVT_CLASS_INFO
= 0,
324 MFI_EVT_CLASS_WARNING
= 1,
325 MFI_EVT_CLASS_CRITICAL
= 2,
326 MFI_EVT_CLASS_FATAL
= 3,
327 MFI_EVT_CLASS_DEAD
= 4
332 MFI_EVT_LOCALE_LD
= 0x0001,
333 MFI_EVT_LOCALE_PD
= 0x0002,
334 MFI_EVT_LOCALE_ENCL
= 0x0004,
335 MFI_EVT_LOCALE_BBU
= 0x0008,
336 MFI_EVT_LOCALE_SAS
= 0x0010,
337 MFI_EVT_LOCALE_CTRL
= 0x0020,
338 MFI_EVT_LOCALE_CONFIG
= 0x0040,
339 MFI_EVT_LOCALE_CLUSTER
= 0x0080,
340 MFI_EVT_LOCALE_ALL
= 0xffff
345 MR_EVT_ARGS_NONE
= 0x00,
346 MR_EVT_ARGS_CDB_SENSE
,
348 MR_EVT_ARGS_LD_COUNT
,
350 MR_EVT_ARGS_LD_OWNER
,
351 MR_EVT_ARGS_LD_LBA_PD_LBA
,
353 MR_EVT_ARGS_LD_STATE
,
354 MR_EVT_ARGS_LD_STRIP
,
358 MR_EVT_ARGS_PD_LBA_LD
,
360 MR_EVT_ARGS_PD_STATE
,
367 MR_EVT_ARGS_PD_SPARE
,
368 MR_EVT_ARGS_PD_INDEX
,
369 MR_EVT_ARGS_DIAG_PASS
,
370 MR_EVT_ARGS_DIAG_FAIL
,
371 MR_EVT_ARGS_PD_LBA_LBA
,
372 MR_EVT_ARGS_PORT_PHY
,
373 MR_EVT_ARGS_PD_MISSING
,
374 MR_EVT_ARGS_PD_ADDRESS
,
376 MR_EVT_ARGS_CONNECTOR
,
379 MR_EVT_ARGS_PD_PATHINFO
,
380 MR_EVT_ARGS_PD_POWER_STATE
,
385 #define MR_EVT_CFG_CLEARED 0x0004
386 #define MR_EVT_CTRL_SHUTDOWN 0x002a
387 #define MR_EVT_LD_STATE_CHANGE 0x0051
388 #define MR_EVT_PD_INSERTED 0x005b
389 #define MR_EVT_PD_REMOVED 0x0070
390 #define MR_EVT_PD_STATE_CHANGED 0x0072
391 #define MR_EVT_LD_CREATED 0x008a
392 #define MR_EVT_LD_DELETED 0x008b
393 #define MR_EVT_FOREIGN_CFG_IMPORTED 0x00db
394 #define MR_EVT_LD_OFFLINE 0x00fc
395 #define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED 0x0152
398 MR_LD_CACHE_WRITE_BACK
= 0x01,
399 MR_LD_CACHE_WRITE_ADAPTIVE
= 0x02,
400 MR_LD_CACHE_READ_AHEAD
= 0x04,
401 MR_LD_CACHE_READ_ADAPTIVE
= 0x08,
402 MR_LD_CACHE_WRITE_CACHE_BAD_BBU
= 0x10,
403 MR_LD_CACHE_ALLOW_WRITE_CACHE
= 0x20,
404 MR_LD_CACHE_ALLOW_READ_CACHE
= 0x40
408 MR_PD_CACHE_UNCHANGED
= 0,
409 MR_PD_CACHE_ENABLE
= 1,
410 MR_PD_CACHE_DISABLE
= 2
414 MR_PD_QUERY_TYPE_ALL
= 0,
415 MR_PD_QUERY_TYPE_STATE
= 1,
416 MR_PD_QUERY_TYPE_POWER_STATE
= 2,
417 MR_PD_QUERY_TYPE_MEDIA_TYPE
= 3,
418 MR_PD_QUERY_TYPE_SPEED
= 4,
419 MR_PD_QUERY_TYPE_EXPOSED_TO_HOST
= 5, /*query for system drives */
423 MR_LD_QUERY_TYPE_ALL
= 0,
424 MR_LD_QUERY_TYPE_EXPOSED_TO_HOST
= 1,
425 MR_LD_QUERY_TYPE_USED_TGT_IDS
= 2,
426 MR_LD_QUERY_TYPE_CLUSTER_ACCESS
= 3,
427 MR_LD_QUERY_TYPE_CLUSTER_LOCALE
= 4,
431 * Other propertities and definitions
433 #define MFI_MAX_PD_CHANNELS 2
434 #define MFI_MAX_LD_CHANNELS 2
435 #define MFI_MAX_CHANNELS (MFI_MAX_PD_CHANNELS + MFI_MAX_LD_CHANNELS)
436 #define MFI_MAX_CHANNEL_DEVS 128
437 #define MFI_DEFAULT_ID -1
438 #define MFI_MAX_LUN 8
439 #define MFI_MAX_LD 64
441 #define MFI_FRAME_SIZE 64
442 #define MFI_MBOX_SIZE 12
444 /* Firmware flashing can take 40s */
445 #define MFI_POLL_TIMEOUT_SECS 50
447 /* Allow for speedier math calculations */
448 #define MFI_SECTOR_LEN 512
450 /* Scatter Gather elements */
461 struct mfi_sg_skinny
{
468 struct mfi_sg32 sg32
[1];
469 struct mfi_sg64 sg64
[1];
470 struct mfi_sg_skinny sg_skinny
[1];
473 /* Message frames. All messages have a common header */
474 struct mfi_frame_header
{
489 struct mfi_init_frame
{
490 struct mfi_frame_header header
;
491 uint32_t qinfo_new_addr_lo
;
492 uint32_t qinfo_new_addr_hi
;
493 uint32_t qinfo_old_addr_lo
;
494 uint32_t qinfo_old_addr_hi
;
495 uint32_t reserved
[6];
498 #define MFI_IO_FRAME_SIZE 40
499 struct mfi_io_frame
{
500 struct mfi_frame_header header
;
501 uint32_t sense_addr_lo
;
502 uint32_t sense_addr_hi
;
508 #define MFI_PASS_FRAME_SIZE 48
509 struct mfi_pass_frame
{
510 struct mfi_frame_header header
;
511 uint32_t sense_addr_lo
;
512 uint32_t sense_addr_hi
;
517 #define MFI_DCMD_FRAME_SIZE 40
518 struct mfi_dcmd_frame
{
519 struct mfi_frame_header header
;
521 uint8_t mbox
[MFI_MBOX_SIZE
];
525 struct mfi_abort_frame
{
526 struct mfi_frame_header header
;
527 uint64_t abort_context
;
528 uint32_t abort_mfi_addr_lo
;
529 uint32_t abort_mfi_addr_hi
;
530 uint32_t reserved1
[6];
533 struct mfi_smp_frame
{
534 struct mfi_frame_header header
;
537 struct mfi_sg32 sg32
[2];
538 struct mfi_sg64 sg64
[2];
542 struct mfi_stp_frame
{
543 struct mfi_frame_header header
;
547 struct mfi_sg32 sg32
[2];
548 struct mfi_sg64 sg64
[2];
553 struct mfi_frame_header header
;
554 struct mfi_init_frame init
;
555 struct mfi_io_frame io
;
556 struct mfi_pass_frame pass
;
557 struct mfi_dcmd_frame dcmd
;
558 struct mfi_abort_frame abort
;
559 struct mfi_smp_frame smp
;
560 struct mfi_stp_frame stp
;
562 uint8_t bytes
[MFI_FRAME_SIZE
];
565 #define MFI_SENSE_LEN 128
567 uint8_t data
[MFI_SENSE_LEN
];
570 #define MFI_QUEUE_FLAG_CONTEXT64 0x00000002
572 /* The queue init structure that is passed with the init message */
573 struct mfi_init_qinfo
{
584 /* Controller properties */
585 struct mfi_ctrl_props
{
587 uint16_t pred_fail_poll_interval
;
588 uint16_t intr_throttle_cnt
;
589 uint16_t intr_throttle_timeout
;
590 uint8_t rebuild_rate
;
591 uint8_t patrol_read_rate
;
595 uint8_t cache_flush_interval
;
596 uint8_t spinup_drv_cnt
;
597 uint8_t spinup_delay
;
598 uint8_t cluster_enable
;
599 uint8_t coercion_mode
;
600 uint8_t alarm_enable
;
601 uint8_t disable_auto_rebuild
;
602 uint8_t disable_battery_warn
;
603 uint8_t ecc_bucket_size
;
604 uint16_t ecc_bucket_leak_rate
;
605 uint8_t restore_hotspare_on_insertion
;
606 uint8_t expose_encl_devices
;
607 uint8_t maintainPdFailHistory
;
608 uint8_t disallowHostRequestReordering
;
609 uint8_t abortCCOnError
;
610 uint8_t loadBalanceMode
;
611 uint8_t disableAutoDetectBackplane
;
613 uint32_t OnOffProperties
;
614 /* set TRUE to disable copyBack (0=copyback enabled) */
615 #define MFI_CTRL_PROP_CopyBackDisabled (1 << 0)
616 #define MFI_CTRL_PROP_SMARTerEnabled (1 << 1)
617 #define MFI_CTRL_PROP_PRCorrectUnconfiguredAreas (1 << 2)
618 #define MFI_CTRL_PROP_UseFdeOnly (1 << 3)
619 #define MFI_CTRL_PROP_DisableNCQ (1 << 4)
620 #define MFI_CTRL_PROP_SSDSMARTerEnabled (1 << 5)
621 #define MFI_CTRL_PROP_SSDPatrolReadEnabled (1 << 6)
622 #define MFI_CTRL_PROP_EnableSpinDownUnconfigured (1 << 7)
623 #define MFI_CTRL_PROP_AutoEnhancedImport (1 << 8)
624 #define MFI_CTRL_PROP_EnableSecretKeyControl (1 << 9)
625 #define MFI_CTRL_PROP_DisableOnlineCtrlReset (1 << 10)
626 #define MFI_CTRL_PROP_AllowBootWithPinnedCache (1 << 11)
627 #define MFI_CTRL_PROP_DisableSpinDownHS (1 << 12)
628 #define MFI_CTRL_PROP_EnableJBOD (1 << 13)
630 uint8_t autoSnapVDSpace
; /* % of source LD to be
631 * reserved for auto snapshot
632 * in snapshot repository, for
633 * metadata and user data
634 * 1=5%, 2=10%, 3=15% and so on
636 uint8_t viewSpace
; /* snapshot writable VIEWs
637 * capacity as a % of source LD
638 * capacity. 0=READ only
639 * 1=5%, 2=10%, 3=15% and so on
641 uint16_t spinDownTime
; /* # of idle minutes before device
642 * is spun down (0=use FW defaults)
644 uint8_t reserved
[24];
647 /* PCI information about the card. */
648 struct mfi_info_pci
{
653 uint8_t reserved
[24];
656 /* Host (front end) interface information */
657 struct mfi_info_host
{
659 #define MFI_INFO_HOST_PCIX 0x01
660 #define MFI_INFO_HOST_PCIE 0x02
661 #define MFI_INFO_HOST_ISCSI 0x04
662 #define MFI_INFO_HOST_SAS3G 0x08
665 uint64_t port_addr
[8];
668 /* Device (back end) interface information */
669 struct mfi_info_device
{
671 #define MFI_INFO_DEV_SPI 0x01
672 #define MFI_INFO_DEV_SAS3G 0x02
673 #define MFI_INFO_DEV_SATA1 0x04
674 #define MFI_INFO_DEV_SATA3G 0x08
675 #define MFI_INFO_DEV_PCIE 0x10
678 uint64_t port_addr
[8];
681 /* Firmware component information */
682 struct mfi_info_component
{
689 /* Controller default settings */
690 struct mfi_defaults
{
692 uint8_t phy_polarity
;
693 uint8_t background_rate
;
698 uint8_t cache_when_bbu_bad
;
701 uint8_t alarm_disable
;
704 uint8_t dirty_led_shows_drive_activity
;
705 uint8_t bios_continue_on_error
;
706 uint8_t spindown_mode
;
707 uint8_t allowed_device_types
;
708 uint8_t allow_mix_in_enclosure
;
709 uint8_t allow_mix_in_ld
;
710 uint8_t allow_sata_in_cluster
;
711 uint8_t max_chained_enclosures
;
712 uint8_t disable_ctrl_r
;
713 uint8_t enable_web_bios
;
714 uint8_t phy_polarity_split
;
715 uint8_t direct_pd_mapping
;
716 uint8_t bios_enumerate_lds
;
717 uint8_t restored_hot_spare_on_insertion
;
718 uint8_t expose_enclosure_devices
;
719 uint8_t maintain_pd_fail_history
;
720 uint8_t disable_puncture
;
721 uint8_t zero_based_enumeration
;
722 uint8_t disable_preboot_cli
;
723 uint8_t show_drive_led_on_activity
;
724 uint8_t cluster_disable
;
726 uint8_t auto_detect_backplane
;
728 uint8_t delay_during_post
;
732 /* Controller default settings */
733 struct mfi_bios_data
{
734 uint16_t boot_target_id
;
735 uint8_t do_not_int_13
;
736 uint8_t continue_on_error
;
739 uint8_t expose_all_drives
;
740 uint8_t reserved
[56];
744 /* SAS (?) controller info, returned from MFI_DCMD_CTRL_GETINFO. */
745 struct mfi_ctrl_info
{
746 struct mfi_info_pci pci
;
747 struct mfi_info_host host
;
748 struct mfi_info_device device
;
750 /* Firmware components that are present and active. */
751 uint32_t image_check_word
;
752 uint32_t image_component_count
;
753 struct mfi_info_component image_component
[8];
755 /* Firmware components that have been flashed but are inactive */
756 uint32_t pending_image_component_count
;
757 struct mfi_info_component pending_image_component
[8];
763 char product_name
[80];
764 char serial_number
[32];
766 #define MFI_INFO_HW_BBU 0x01
767 #define MFI_INFO_HW_ALARM 0x02
768 #define MFI_INFO_HW_NVRAM 0x04
769 #define MFI_INFO_HW_UART 0x08
770 #define MFI_INFO_HW_MEM 0x10
771 #define MFI_INFO_HW_FLASH 0x20
772 uint32_t current_fw_time
;
774 uint16_t max_sg_elements
;
775 uint32_t max_request_size
;
776 uint16_t lds_present
;
777 uint16_t lds_degraded
;
778 uint16_t lds_offline
;
780 uint16_t pd_disks_present
;
781 uint16_t pd_disks_pred_failure
;
782 uint16_t pd_disks_failed
;
784 uint16_t memory_size
;
786 uint16_t ram_correctable_errors
;
787 uint16_t ram_uncorrectable_errors
;
788 uint8_t cluster_allowed
;
789 uint8_t cluster_active
;
790 uint16_t max_strips_per_io
;
792 uint32_t raid_levels
;
793 #define MFI_INFO_RAID_0 0x01
794 #define MFI_INFO_RAID_1 0x02
795 #define MFI_INFO_RAID_5 0x04
796 #define MFI_INFO_RAID_1E 0x08
797 #define MFI_INFO_RAID_6 0x10
799 uint32_t adapter_ops
;
800 #define MFI_INFO_AOPS_RBLD_RATE 0x0001
801 #define MFI_INFO_AOPS_CC_RATE 0x0002
802 #define MFI_INFO_AOPS_BGI_RATE 0x0004
803 #define MFI_INFO_AOPS_RECON_RATE 0x0008
804 #define MFI_INFO_AOPS_PATROL_RATE 0x0010
805 #define MFI_INFO_AOPS_ALARM_CONTROL 0x0020
806 #define MFI_INFO_AOPS_CLUSTER_SUPPORTED 0x0040
807 #define MFI_INFO_AOPS_BBU 0x0080
808 #define MFI_INFO_AOPS_SPANNING_ALLOWED 0x0100
809 #define MFI_INFO_AOPS_DEDICATED_SPARES 0x0200
810 #define MFI_INFO_AOPS_REVERTIBLE_SPARES 0x0400
811 #define MFI_INFO_AOPS_FOREIGN_IMPORT 0x0800
812 #define MFI_INFO_AOPS_SELF_DIAGNOSTIC 0x1000
813 #define MFI_INFO_AOPS_MIXED_ARRAY 0x2000
814 #define MFI_INFO_AOPS_GLOBAL_SPARES 0x4000
817 #define MFI_INFO_LDOPS_READ_POLICY 0x01
818 #define MFI_INFO_LDOPS_WRITE_POLICY 0x02
819 #define MFI_INFO_LDOPS_IO_POLICY 0x04
820 #define MFI_INFO_LDOPS_ACCESS_POLICY 0x08
821 #define MFI_INFO_LDOPS_DISK_CACHE_POLICY 0x10
827 } QEMU_PACKED stripe_sz_ops
;
830 #define MFI_INFO_PDOPS_FORCE_ONLINE 0x01
831 #define MFI_INFO_PDOPS_FORCE_OFFLINE 0x02
832 #define MFI_INFO_PDOPS_FORCE_REBUILD 0x04
834 uint32_t pd_mix_support
;
835 #define MFI_INFO_PDMIX_SAS 0x01
836 #define MFI_INFO_PDMIX_SATA 0x02
837 #define MFI_INFO_PDMIX_ENCL 0x04
838 #define MFI_INFO_PDMIX_LD 0x08
839 #define MFI_INFO_PDMIX_SATA_CLUSTER 0x10
841 uint8_t ecc_bucket_count
;
842 uint8_t reserved2
[11];
843 struct mfi_ctrl_props properties
;
844 char package_version
[0x60];
845 uint8_t pad
[0x800 - 0x6a0];
848 /* keep track of an event. */
858 /* event log state. */
859 struct mfi_evt_log_state
{
860 uint32_t newest_seq_num
;
861 uint32_t oldest_seq_num
;
862 uint32_t clear_seq_num
;
863 uint32_t shutdown_seq_num
;
864 uint32_t boot_seq_num
;
867 struct mfi_progress
{
869 uint16_t elapsed_seconds
;
880 uint8_t enclosure_index
;
884 /* event detail, returned from MFI_DCMD_CTRL_EVENT_WAIT. */
885 struct mfi_evt_detail
{
891 uint8_t reserved1
[15];
895 struct mfi_evt_pd pd
;
903 struct mfi_evt_ld ld
;
906 struct mfi_evt_ld ld
;
912 struct mfi_evt_ld ld
;
916 struct mfi_evt_ld ld
;
924 struct mfi_evt_ld ld
;
925 struct mfi_evt_pd pd
;
929 struct mfi_evt_ld ld
;
930 struct mfi_progress prog
;
934 struct mfi_evt_ld ld
;
941 struct mfi_evt_ld ld
;
944 struct mfi_evt_pd pd
;
947 struct mfi_evt_pd pd
;
953 struct mfi_evt_pd pd
;
958 struct mfi_evt_pd pd
;
959 struct mfi_evt_ld ld
;
963 struct mfi_evt_pd pd
;
964 struct mfi_progress prog
;
968 struct mfi_evt_pd ld
;
976 uint16_t subVenderId
;
977 uint16_t subDeviceId
;
986 uint16_t elapsedSeconds
;
1001 char description
[128];
1004 struct mfi_evt_list
{
1007 struct mfi_evt_detail event
[1];
1018 union mfi_pd_ddf_type
{
1021 #define MFI_PD_DDF_TYPE_FORCED_PD_GUID (1 << 0)
1022 #define MFI_PD_DDF_TYPE_IN_VD (1 << 1)
1023 #define MFI_PD_DDF_TYPE_IS_GLOBAL_SPARE (1 << 2)
1024 #define MFI_PD_DDF_TYPE_IS_SPARE (1 << 3)
1025 #define MFI_PD_DDF_TYPE_IS_FOREIGN (1 << 4)
1026 #define MFI_PD_DDF_TYPE_INTF_SPI (1 << 12)
1027 #define MFI_PD_DDF_TYPE_INTF_SAS (1 << 13)
1028 #define MFI_PD_DDF_TYPE_INTF_SATA1 (1 << 14)
1029 #define MFI_PD_DDF_TYPE_INTF_SATA3G (1 << 15)
1038 struct mfi_pd_progress
{
1040 #define PD_PROGRESS_ACTIVE_REBUILD (1 << 0)
1041 #define PD_PROGRESS_ACTIVE_PATROL (1 << 1)
1042 #define PD_PROGRESS_ACTIVE_CLEAR (1 << 2)
1043 struct mfi_progress rbld
;
1044 struct mfi_progress patrol
;
1045 struct mfi_progress clear
;
1046 struct mfi_progress reserved
[4];
1049 struct mfi_pd_info
{
1050 union mfi_pd_ref ref
;
1051 uint8_t inquiry_data
[96];
1052 uint8_t vpd_page83
[64];
1053 uint8_t not_supported
;
1054 uint8_t scsi_dev_type
;
1055 uint8_t connected_port_bitmap
;
1056 uint8_t device_speed
;
1057 uint32_t media_err_count
;
1058 uint32_t other_err_count
;
1059 uint32_t pred_fail_count
;
1060 uint32_t last_pred_fail_event_seq_num
;
1062 uint8_t disable_for_removal
;
1064 union mfi_pd_ddf_type state
;
1067 uint8_t is_path_broken
;
1068 uint8_t reserved
[6];
1069 uint64_t sas_addr
[4];
1072 uint64_t non_coerced_size
;
1073 uint64_t coerced_size
;
1074 uint16_t encl_device_id
;
1076 uint8_t slot_number
;
1077 struct mfi_pd_progress prog_info
;
1078 uint8_t bad_block_table_full
;
1079 uint8_t unusable_in_current_config
;
1080 uint8_t vpd_page83_ext
[64];
1081 uint8_t reserved
[512-358];
1084 struct mfi_pd_address
{
1086 uint16_t encl_device_id
;
1088 uint8_t slot_number
;
1089 uint8_t scsi_dev_type
;
1090 uint8_t connect_port_bitmap
;
1091 uint64_t sas_addr
[2];
1094 #define MFI_MAX_SYS_PDS 240
1095 struct mfi_pd_list
{
1098 struct mfi_pd_address addr
[MFI_MAX_SYS_PDS
];
1110 struct mfi_ld_list
{
1114 union mfi_ld_ref ld
;
1116 uint8_t reserved2
[3];
1118 } ld_list
[MFI_MAX_LD
];
1121 struct mfi_ld_targetid_list
{
1125 uint8_t targetid
[MFI_MAX_LD
];
1128 enum mfi_ld_access
{
1129 MFI_LD_ACCESS_RW
= 0,
1130 MFI_LD_ACCSSS_RO
= 2,
1131 MFI_LD_ACCESS_BLOCKED
= 3,
1133 #define MFI_LD_ACCESS_MASK 3
1136 MFI_LD_STATE_OFFLINE
= 0,
1137 MFI_LD_STATE_PARTIALLY_DEGRADED
= 1,
1138 MFI_LD_STATE_DEGRADED
= 2,
1139 MFI_LD_STATE_OPTIMAL
= 3
1142 enum mfi_syspd_state
{
1143 MFI_PD_STATE_UNCONFIGURED_GOOD
= 0x00,
1144 MFI_PD_STATE_UNCONFIGURED_BAD
= 0x01,
1145 MFI_PD_STATE_HOT_SPARE
= 0x02,
1146 MFI_PD_STATE_OFFLINE
= 0x10,
1147 MFI_PD_STATE_FAILED
= 0x11,
1148 MFI_PD_STATE_REBUILD
= 0x14,
1149 MFI_PD_STATE_ONLINE
= 0x18,
1150 MFI_PD_STATE_COPYBACK
= 0x20,
1151 MFI_PD_STATE_SYSTEM
= 0x40
1154 struct mfi_ld_props
{
1155 union mfi_ld_ref ld
;
1157 uint8_t default_cache_policy
;
1158 uint8_t access_policy
;
1159 uint8_t disk_cache_policy
;
1160 uint8_t current_cache_policy
;
1162 uint8_t reserved
[7];
1165 struct mfi_ld_params
{
1166 uint8_t primary_raid_level
;
1167 uint8_t raid_level_qualifier
;
1168 uint8_t secondary_raid_level
;
1169 uint8_t stripe_size
;
1174 uint8_t is_consistent
;
1175 uint8_t reserved
[23];
1178 struct mfi_ld_progress
{
1180 #define MFI_LD_PROGRESS_CC (1<<0)
1181 #define MFI_LD_PROGRESS_BGI (1<<1)
1182 #define MFI_LD_PROGRESS_FGI (1<<2)
1183 #define MFI_LD_PORGRESS_RECON (1<<3)
1184 struct mfi_progress cc
;
1185 struct mfi_progress bgi
;
1186 struct mfi_progress fgi
;
1187 struct mfi_progress recon
;
1188 struct mfi_progress reserved
[4];
1192 uint64_t start_block
;
1193 uint64_t num_blocks
;
1195 uint8_t reserved
[6];
1198 #define MFI_MAX_SPAN_DEPTH 8
1199 struct mfi_ld_config
{
1200 struct mfi_ld_props properties
;
1201 struct mfi_ld_params params
;
1202 struct mfi_span span
[MFI_MAX_SPAN_DEPTH
];
1205 struct mfi_ld_info
{
1206 struct mfi_ld_config ld_config
;
1208 struct mfi_ld_progress progress
;
1209 uint16_t cluster_owner
;
1210 uint8_t reconstruct_active
;
1211 uint8_t reserved1
[1];
1212 uint8_t vpd_page83
[64];
1213 uint8_t reserved2
[16];
1216 union mfi_spare_type
{
1218 #define MFI_SPARE_IS_DEDICATED (1 << 0)
1219 #define MFI_SPARE_IS_REVERTABLE (1 << 1)
1220 #define MFI_SPARE_IS_ENCL_AFFINITY (1 << 2)
1224 #define MFI_MAX_ARRAYS 16
1226 union mfi_pd_ref ref
;
1227 union mfi_spare_type spare_type
;
1228 uint8_t reserved
[2];
1229 uint8_t array_count
;
1230 uint16_t array_refd
[MFI_MAX_ARRAYS
];
1233 #define MFI_MAX_ROW_SIZE 32
1241 union mfi_pd_ref ref
;
1242 uint16_t fw_state
; /* enum mfi_syspd_state */
1247 } pd
[MFI_MAX_ROW_SIZE
];
1250 struct mfi_config_data
{
1252 uint16_t array_count
;
1253 uint16_t array_size
;
1254 uint16_t log_drv_count
;
1255 uint16_t log_drv_size
;
1256 uint16_t spares_count
;
1257 uint16_t spares_size
;
1258 uint8_t reserved
[16];
1260 struct mfi_array array[];
1261 struct mfi_ld_config ld[];
1262 struct mfi_spare spare[];
1266 #define MFI_SCSI_MAX_TARGETS 128
1267 #define MFI_SCSI_MAX_LUNS 8
1268 #define MFI_SCSI_INITIATOR_ID 255
1269 #define MFI_SCSI_MAX_CMDS 8
1270 #define MFI_SCSI_MAX_CDB_LEN 16
1272 #endif /* SCSI_MFI_H */