hw/dma/pl080.c

   1 /*
   2  * Arm PrimeCell PL080/PL081 DMA controller
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "qemu/osdep.h"
  11 #include "hw/sysbus.h"
  12 #include "migration/vmstate.h"
  13 #include "qemu/log.h"
  14 #include "qemu/module.h"
  15 #include "hw/dma/pl080.h"
  16 #include "hw/hw.h"
  17 #include "hw/irq.h"
  18 #include "hw/qdev-properties.h"
  19 #include "qapi/error.h"
  20
  21 #define PL080_CONF_E    0x1
  22 #define PL080_CONF_M1   0x2
  23 #define PL080_CONF_M2   0x4
  24
  25 #define PL080_CCONF_H   0x40000
  26 #define PL080_CCONF_A   0x20000
  27 #define PL080_CCONF_L   0x10000
  28 #define PL080_CCONF_ITC 0x08000
  29 #define PL080_CCONF_IE  0x04000
  30 #define PL080_CCONF_E   0x00001
  31
  32 #define PL080_CCTRL_I   0x80000000
  33 #define PL080_CCTRL_DI  0x08000000
  34 #define PL080_CCTRL_SI  0x04000000
  35 #define PL080_CCTRL_D   0x02000000
  36 #define PL080_CCTRL_S   0x01000000
  37
  38 static const VMStateDescription vmstate_pl080_channel = {
  39     .name = "pl080_channel",
  40     .version_id = 1,
  41     .minimum_version_id = 1,
  42     .fields = (VMStateField[]) {
  43         VMSTATE_UINT32(src, pl080_channel),
  44         VMSTATE_UINT32(dest, pl080_channel),
  45         VMSTATE_UINT32(lli, pl080_channel),
  46         VMSTATE_UINT32(ctrl, pl080_channel),
  47         VMSTATE_UINT32(conf, pl080_channel),
  48         VMSTATE_END_OF_LIST()
  49     }
  50 };
  51
  52 static const VMStateDescription vmstate_pl080 = {
  53     .name = "pl080",
  54     .version_id = 1,
  55     .minimum_version_id = 1,
  56     .fields = (VMStateField[]) {
  57         VMSTATE_UINT8(tc_int, PL080State),
  58         VMSTATE_UINT8(tc_mask, PL080State),
  59         VMSTATE_UINT8(err_int, PL080State),
  60         VMSTATE_UINT8(err_mask, PL080State),
  61         VMSTATE_UINT32(conf, PL080State),
  62         VMSTATE_UINT32(sync, PL080State),
  63         VMSTATE_UINT32(req_single, PL080State),
  64         VMSTATE_UINT32(req_burst, PL080State),
  65         VMSTATE_UINT8(tc_int, PL080State),
  66         VMSTATE_UINT8(tc_int, PL080State),
  67         VMSTATE_UINT8(tc_int, PL080State),
  68         VMSTATE_STRUCT_ARRAY(chan, PL080State, PL080_MAX_CHANNELS,
  69                              1, vmstate_pl080_channel, pl080_channel),
  70         VMSTATE_INT32(running, PL080State),
  71         VMSTATE_END_OF_LIST()
  72     }
  73 };
  74
  75 static const unsigned char pl080_id[] =
  76 { 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
  77
  78 static const unsigned char pl081_id[] =
  79 { 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
  80
  81 static void pl080_update(PL080State *s)
  82 {
  83     bool tclevel = (s->tc_int & s->tc_mask);
  84     bool errlevel = (s->err_int & s->err_mask);
  85
  86     qemu_set_irq(s->interr, errlevel);
  87     qemu_set_irq(s->inttc, tclevel);
  88     qemu_set_irq(s->irq, errlevel || tclevel);
  89 }
  90
  91 static void pl080_run(PL080State *s)
  92 {
  93     int c;
  94     int flow;
  95     pl080_channel *ch;
  96     int swidth;
  97     int dwidth;
  98     int xsize;
  99     int n;
 100     int src_id;
 101     int dest_id;
 102     int size;
 103     uint8_t buff[4];
 104     uint32_t req;
 105
 106     s->tc_mask = 0;
 107     for (c = 0; c < s->nchannels; c++) {
 108         if (s->chan[c].conf & PL080_CCONF_ITC)
 109             s->tc_mask |= 1 << c;
 110         if (s->chan[c].conf & PL080_CCONF_IE)
 111             s->err_mask |= 1 << c;
 112     }
 113
 114     if ((s->conf & PL080_CONF_E) == 0)
 115         return;
 116
 117     /* If we are already in the middle of a DMA operation then indicate that
 118        there may be new DMA requests and return immediately.  */
 119     if (s->running) {
 120         s->running++;
 121         return;
 122     }
 123     s->running = 1;
 124     while (s->running) {
 125         for (c = 0; c < s->nchannels; c++) {
 126             ch = &s->chan[c];
 127 again:
 128             /* Test if thiws channel has any pending DMA requests.  */
 129             if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E))
 130                     != PL080_CCONF_E)
 131                 continue;
 132             flow = (ch->conf >> 11) & 7;
 133             if (flow >= 4) {
 134                 hw_error(
 135                     "pl080_run: Peripheral flow control not implemented\n");
 136             }
 137             src_id = (ch->conf >> 1) & 0x1f;
 138             dest_id = (ch->conf >> 6) & 0x1f;
 139             size = ch->ctrl & 0xfff;
 140             req = s->req_single | s->req_burst;
 141             switch (flow) {
 142             case 0:
 143                 break;
 144             case 1:
 145                 if ((req & (1u << dest_id)) == 0)
 146                     size = 0;
 147                 break;
 148             case 2:
 149                 if ((req & (1u << src_id)) == 0)
 150                     size = 0;
 151                 break;
 152             case 3:
 153                 if ((req & (1u << src_id)) == 0
 154                         || (req & (1u << dest_id)) == 0)
 155                     size = 0;
 156                 break;
 157             }
 158             if (!size)
 159                 continue;
 160
 161             /* Transfer one element.  */
 162             /* ??? Should transfer multiple elements for a burst request.  */
 163             /* ??? Unclear what the proper behavior is when source and
 164                destination widths are different.  */
 165             swidth = 1 << ((ch->ctrl >> 18) & 7);
 166             dwidth = 1 << ((ch->ctrl >> 21) & 7);
 167             for (n = 0; n < dwidth; n+= swidth) {
 168                 address_space_read(&s->downstream_as, ch->src,
 169                                    MEMTXATTRS_UNSPECIFIED, buff + n, swidth);
 170                 if (ch->ctrl & PL080_CCTRL_SI)
 171                     ch->src += swidth;
 172             }
 173             xsize = (dwidth < swidth) ? swidth : dwidth;
 174             /* ??? This may pad the value incorrectly for dwidth < 32.  */
 175             for (n = 0; n < xsize; n += dwidth) {
 176                 address_space_write(&s->downstream_as, ch->dest + n,
 177                                     MEMTXATTRS_UNSPECIFIED, buff + n, dwidth);
 178                 if (ch->ctrl & PL080_CCTRL_DI)
 179                     ch->dest += swidth;
 180             }
 181
 182             size--;
 183             ch->ctrl = (ch->ctrl & 0xfffff000) | size;
 184             if (size == 0) {
 185                 /* Transfer complete.  */
 186                 if (ch->lli) {
 187                     ch->src = address_space_ldl_le(&s->downstream_as,
 188                                                    ch->lli,
 189                                                    MEMTXATTRS_UNSPECIFIED,
 190                                                    NULL);
 191                     ch->dest = address_space_ldl_le(&s->downstream_as,
 192                                                     ch->lli + 4,
 193                                                     MEMTXATTRS_UNSPECIFIED,
 194                                                     NULL);
 195                     ch->ctrl = address_space_ldl_le(&s->downstream_as,
 196                                                     ch->lli + 12,
 197                                                     MEMTXATTRS_UNSPECIFIED,
 198                                                     NULL);
 199                     ch->lli = address_space_ldl_le(&s->downstream_as,
 200                                                    ch->lli + 8,
 201                                                    MEMTXATTRS_UNSPECIFIED,
 202                                                    NULL);
 203                 } else {
 204                     ch->conf &= ~PL080_CCONF_E;
 205                 }
 206                 if (ch->ctrl & PL080_CCTRL_I) {
 207                     s->tc_int |= 1 << c;
 208                 }
 209             }
 210             goto again;
 211         }
 212         if (--s->running)
 213             s->running = 1;
 214     }
 215 }
 216
 217 static uint64_t pl080_read(void *opaque, hwaddr offset,
 218                            unsigned size)
 219 {
 220     PL080State *s = (PL080State *)opaque;
 221     uint32_t i;
 222     uint32_t mask;
 223
 224     if (offset >= 0xfe0 && offset < 0x1000) {
 225         if (s->nchannels == 8) {
 226             return pl080_id[(offset - 0xfe0) >> 2];
 227         } else {
 228             return pl081_id[(offset - 0xfe0) >> 2];
 229         }
 230     }
 231     if (offset >= 0x100 && offset < 0x200) {
 232         i = (offset & 0xe0) >> 5;
 233         if (i >= s->nchannels)
 234             goto bad_offset;
 235         switch ((offset >> 2) & 7) {
 236         case 0: /* SrcAddr */
 237             return s->chan[i].src;
 238         case 1: /* DestAddr */
 239             return s->chan[i].dest;
 240         case 2: /* LLI */
 241             return s->chan[i].lli;
 242         case 3: /* Control */
 243             return s->chan[i].ctrl;
 244         case 4: /* Configuration */
 245             return s->chan[i].conf;
 246         default:
 247             goto bad_offset;
 248         }
 249     }
 250     switch (offset >> 2) {
 251     case 0: /* IntStatus */
 252         return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask);
 253     case 1: /* IntTCStatus */
 254         return (s->tc_int & s->tc_mask);
 255     case 3: /* IntErrorStatus */
 256         return (s->err_int & s->err_mask);
 257     case 5: /* RawIntTCStatus */
 258         return s->tc_int;
 259     case 6: /* RawIntErrorStatus */
 260         return s->err_int;
 261     case 7: /* EnbldChns */
 262         mask = 0;
 263         for (i = 0; i < s->nchannels; i++) {
 264             if (s->chan[i].conf & PL080_CCONF_E)
 265                 mask |= 1 << i;
 266         }
 267         return mask;
 268     case 8: /* SoftBReq */
 269     case 9: /* SoftSReq */
 270     case 10: /* SoftLBReq */
 271     case 11: /* SoftLSReq */
 272         /* ??? Implement these. */
 273         return 0;
 274     case 12: /* Configuration */
 275         return s->conf;
 276     case 13: /* Sync */
 277         return s->sync;
 278     default:
 279     bad_offset:
 280         qemu_log_mask(LOG_GUEST_ERROR,
 281                       "pl080_read: Bad offset %x\n", (int)offset);
 282         return 0;
 283     }
 284 }
 285
 286 static void pl080_write(void *opaque, hwaddr offset,
 287                         uint64_t value, unsigned size)
 288 {
 289     PL080State *s = (PL080State *)opaque;
 290     int i;
 291
 292     if (offset >= 0x100 && offset < 0x200) {
 293         i = (offset & 0xe0) >> 5;
 294         if (i >= s->nchannels)
 295             goto bad_offset;
 296         switch ((offset >> 2) & 7) {
 297         case 0: /* SrcAddr */
 298             s->chan[i].src = value;
 299             break;
 300         case 1: /* DestAddr */
 301             s->chan[i].dest = value;
 302             break;
 303         case 2: /* LLI */
 304             s->chan[i].lli = value;
 305             break;
 306         case 3: /* Control */
 307             s->chan[i].ctrl = value;
 308             break;
 309         case 4: /* Configuration */
 310             s->chan[i].conf = value;
 311             pl080_run(s);
 312             break;
 313         }
 314         return;
 315     }
 316     switch (offset >> 2) {
 317     case 2: /* IntTCClear */
 318         s->tc_int &= ~value;
 319         break;
 320     case 4: /* IntErrorClear */
 321         s->err_int &= ~value;
 322         break;
 323     case 8: /* SoftBReq */
 324     case 9: /* SoftSReq */
 325     case 10: /* SoftLBReq */
 326     case 11: /* SoftLSReq */
 327         /* ??? Implement these.  */
 328         qemu_log_mask(LOG_UNIMP, "pl080_write: Soft DMA not implemented\n");
 329         break;
 330     case 12: /* Configuration */
 331         s->conf = value;
 332         if (s->conf & (PL080_CONF_M1 | PL080_CONF_M2)) {
 333             qemu_log_mask(LOG_UNIMP,
 334                           "pl080_write: Big-endian DMA not implemented\n");
 335         }
 336         pl080_run(s);
 337         break;
 338     case 13: /* Sync */
 339         s->sync = value;
 340         break;
 341     default:
 342     bad_offset:
 343         qemu_log_mask(LOG_GUEST_ERROR,
 344                       "pl080_write: Bad offset %x\n", (int)offset);
 345     }
 346     pl080_update(s);
 347 }
 348
 349 static const MemoryRegionOps pl080_ops = {
 350     .read = pl080_read,
 351     .write = pl080_write,
 352     .endianness = DEVICE_NATIVE_ENDIAN,
 353 };
 354
 355 static void pl080_reset(DeviceState *dev)
 356 {
 357     PL080State *s = PL080(dev);
 358     int i;
 359
 360     s->tc_int = 0;
 361     s->tc_mask = 0;
 362     s->err_int = 0;
 363     s->err_mask = 0;
 364     s->conf = 0;
 365     s->sync = 0;
 366     s->req_single = 0;
 367     s->req_burst = 0;
 368     s->running = 0;
 369
 370     for (i = 0; i < s->nchannels; i++) {
 371         s->chan[i].src = 0;
 372         s->chan[i].dest = 0;
 373         s->chan[i].lli = 0;
 374         s->chan[i].ctrl = 0;
 375         s->chan[i].conf = 0;
 376     }
 377 }
 378
 379 static void pl080_init(Object *obj)
 380 {
 381     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 382     PL080State *s = PL080(obj);
 383
 384     memory_region_init_io(&s->iomem, OBJECT(s), &pl080_ops, s, "pl080", 0x1000);
 385     sysbus_init_mmio(sbd, &s->iomem);
 386     sysbus_init_irq(sbd, &s->irq);
 387     sysbus_init_irq(sbd, &s->interr);
 388     sysbus_init_irq(sbd, &s->inttc);
 389     s->nchannels = 8;
 390 }
 391
 392 static void pl080_realize(DeviceState *dev, Error **errp)
 393 {
 394     PL080State *s = PL080(dev);
 395
 396     if (!s->downstream) {
 397         error_setg(errp, "PL080 'downstream' link not set");
 398         return;
 399     }
 400
 401     address_space_init(&s->downstream_as, s->downstream, "pl080-downstream");
 402 }
 403
 404 static void pl081_init(Object *obj)
 405 {
 406     PL080State *s = PL080(obj);
 407
 408     s->nchannels = 2;
 409 }
 410
 411 static Property pl080_properties[] = {
 412     DEFINE_PROP_LINK("downstream", PL080State, downstream,
 413                      TYPE_MEMORY_REGION, MemoryRegion *),
 414     DEFINE_PROP_END_OF_LIST(),
 415 };
 416
 417 static void pl080_class_init(ObjectClass *oc, void *data)
 418 {
 419     DeviceClass *dc = DEVICE_CLASS(oc);
 420
 421     dc->vmsd = &vmstate_pl080;
 422     dc->realize = pl080_realize;
 423     device_class_set_props(dc, pl080_properties);
 424     dc->reset = pl080_reset;
 425 }
 426
 427 static const TypeInfo pl080_info = {
 428     .name          = TYPE_PL080,
 429     .parent        = TYPE_SYS_BUS_DEVICE,
 430     .instance_size = sizeof(PL080State),
 431     .instance_init = pl080_init,
 432     .class_init    = pl080_class_init,
 433 };
 434
 435 static const TypeInfo pl081_info = {
 436     .name          = TYPE_PL081,
 437     .parent        = TYPE_PL080,
 438     .instance_init = pl081_init,
 439 };
 440
 441 /* The PL080 and PL081 are the same except for the number of channels
 442    they implement (8 and 2 respectively).  */
 443 static void pl080_register_types(void)
 444 {
 445     type_register_static(&pl080_info);
 446     type_register_static(&pl081_info);
 447 }
 448
 449 type_init(pl080_register_types)