Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20210726a...
[qemu/armbru.git] / hw / input / lm832x.c
blob19a646d9bb4eea23fc3196dad9c5c178c62420b7
1 /*
2 * National Semiconductor LM8322/8323 GPIO keyboard & PWM chips.
4 * Copyright (C) 2008 Nokia Corporation
5 * Written by Andrzej Zaborowski <andrew@openedhand.com>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
21 #include "qemu/osdep.h"
22 #include "hw/input/lm832x.h"
23 #include "hw/i2c/i2c.h"
24 #include "hw/irq.h"
25 #include "migration/vmstate.h"
26 #include "qemu/module.h"
27 #include "qemu/timer.h"
28 #include "ui/console.h"
29 #include "qom/object.h"
31 OBJECT_DECLARE_SIMPLE_TYPE(LM823KbdState, LM8323)
33 struct LM823KbdState {
34 I2CSlave parent_obj;
36 uint8_t i2c_dir;
37 uint8_t i2c_cycle;
38 uint8_t reg;
40 qemu_irq nirq;
41 uint16_t model;
43 struct {
44 qemu_irq out[2];
45 int in[2][2];
46 } mux;
48 uint8_t config;
49 uint8_t status;
50 uint8_t acttime;
51 uint8_t error;
52 uint8_t clock;
54 struct {
55 uint16_t pull;
56 uint16_t mask;
57 uint16_t dir;
58 uint16_t level;
59 qemu_irq out[16];
60 } gpio;
62 struct {
63 uint8_t dbnctime;
64 uint8_t size;
65 uint8_t start;
66 uint8_t len;
67 uint8_t fifo[16];
68 } kbd;
70 struct {
71 uint16_t file[256];
72 uint8_t faddr;
73 uint8_t addr[3];
74 QEMUTimer *tm[3];
75 } pwm;
78 #define INT_KEYPAD (1 << 0)
79 #define INT_ERROR (1 << 3)
80 #define INT_NOINIT (1 << 4)
81 #define INT_PWMEND(n) (1 << (5 + n))
83 #define ERR_BADPAR (1 << 0)
84 #define ERR_CMDUNK (1 << 1)
85 #define ERR_KEYOVR (1 << 2)
86 #define ERR_FIFOOVR (1 << 6)
88 static void lm_kbd_irq_update(LM823KbdState *s)
90 qemu_set_irq(s->nirq, !s->status);
93 static void lm_kbd_gpio_update(LM823KbdState *s)
97 static void lm_kbd_reset(DeviceState *dev)
99 LM823KbdState *s = LM8323(dev);
101 s->config = 0x80;
102 s->status = INT_NOINIT;
103 s->acttime = 125;
104 s->kbd.dbnctime = 3;
105 s->kbd.size = 0x33;
106 s->clock = 0x08;
108 lm_kbd_irq_update(s);
109 lm_kbd_gpio_update(s);
112 static void lm_kbd_error(LM823KbdState *s, int err)
114 s->error |= err;
115 s->status |= INT_ERROR;
116 lm_kbd_irq_update(s);
119 static void lm_kbd_pwm_tick(LM823KbdState *s, int line)
123 static void lm_kbd_pwm_start(LM823KbdState *s, int line)
125 lm_kbd_pwm_tick(s, line);
128 static void lm_kbd_pwm0_tick(void *opaque)
130 lm_kbd_pwm_tick(opaque, 0);
132 static void lm_kbd_pwm1_tick(void *opaque)
134 lm_kbd_pwm_tick(opaque, 1);
136 static void lm_kbd_pwm2_tick(void *opaque)
138 lm_kbd_pwm_tick(opaque, 2);
141 enum {
142 LM832x_CMD_READ_ID = 0x80, /* Read chip ID. */
143 LM832x_CMD_WRITE_CFG = 0x81, /* Set configuration item. */
144 LM832x_CMD_READ_INT = 0x82, /* Get interrupt status. */
145 LM832x_CMD_RESET = 0x83, /* Reset, same as external one */
146 LM823x_CMD_WRITE_PULL_DOWN = 0x84, /* Select GPIO pull-up/down. */
147 LM832x_CMD_WRITE_PORT_SEL = 0x85, /* Select GPIO in/out. */
148 LM832x_CMD_WRITE_PORT_STATE = 0x86, /* Set GPIO pull-up/down. */
149 LM832x_CMD_READ_PORT_SEL = 0x87, /* Get GPIO in/out. */
150 LM832x_CMD_READ_PORT_STATE = 0x88, /* Get GPIO pull-up/down. */
151 LM832x_CMD_READ_FIFO = 0x89, /* Read byte from FIFO. */
152 LM832x_CMD_RPT_READ_FIFO = 0x8a, /* Read FIFO (no increment). */
153 LM832x_CMD_SET_ACTIVE = 0x8b, /* Set active time. */
154 LM832x_CMD_READ_ERROR = 0x8c, /* Get error status. */
155 LM832x_CMD_READ_ROTATOR = 0x8e, /* Read rotator status. */
156 LM832x_CMD_SET_DEBOUNCE = 0x8f, /* Set debouncing time. */
157 LM832x_CMD_SET_KEY_SIZE = 0x90, /* Set keypad size. */
158 LM832x_CMD_READ_KEY_SIZE = 0x91, /* Get keypad size. */
159 LM832x_CMD_READ_CFG = 0x92, /* Get configuration item. */
160 LM832x_CMD_WRITE_CLOCK = 0x93, /* Set clock config. */
161 LM832x_CMD_READ_CLOCK = 0x94, /* Get clock config. */
162 LM832x_CMD_PWM_WRITE = 0x95, /* Write PWM script. */
163 LM832x_CMD_PWM_START = 0x96, /* Start PWM engine. */
164 LM832x_CMD_PWM_STOP = 0x97, /* Stop PWM engine. */
165 LM832x_GENERAL_ERROR = 0xff, /* There was one error.
166 Previously was represented by -1
167 This is not a command */
170 #define LM832x_MAX_KPX 8
171 #define LM832x_MAX_KPY 12
173 static uint8_t lm_kbd_read(LM823KbdState *s, int reg, int byte)
175 int ret;
177 switch (reg) {
178 case LM832x_CMD_READ_ID:
179 ret = 0x0400;
180 break;
182 case LM832x_CMD_READ_INT:
183 ret = s->status;
184 if (!(s->status & INT_NOINIT)) {
185 s->status = 0;
186 lm_kbd_irq_update(s);
188 break;
190 case LM832x_CMD_READ_PORT_SEL:
191 ret = s->gpio.dir;
192 break;
193 case LM832x_CMD_READ_PORT_STATE:
194 ret = s->gpio.mask;
195 break;
197 case LM832x_CMD_READ_FIFO:
198 if (s->kbd.len <= 1)
199 return 0x00;
201 /* Example response from the two commands after a INT_KEYPAD
202 * interrupt caused by the key 0x3c being pressed:
203 * RPT_READ_FIFO: 55 bc 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
204 * READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
205 * RPT_READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
207 * 55 is the code of the key release event serviced in the previous
208 * interrupt handling.
210 * TODO: find out whether the FIFO is advanced a single character
211 * before reading every byte or the whole size of the FIFO at the
212 * last LM832x_CMD_READ_FIFO. This affects LM832x_CMD_RPT_READ_FIFO
213 * output in cases where there are more than one event in the FIFO.
214 * Assume 0xbc and 0x3c events are in the FIFO:
215 * RPT_READ_FIFO: 55 bc 3c 00 4e ff 0a 50 08 00 29 d9 08 01 c9
216 * READ_FIFO: bc 3c 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9
217 * Does RPT_READ_FIFO now return 0xbc and 0x3c or only 0x3c?
219 s->kbd.start ++;
220 s->kbd.start &= sizeof(s->kbd.fifo) - 1;
221 s->kbd.len --;
223 return s->kbd.fifo[s->kbd.start];
224 case LM832x_CMD_RPT_READ_FIFO:
225 if (byte >= s->kbd.len)
226 return 0x00;
228 return s->kbd.fifo[(s->kbd.start + byte) & (sizeof(s->kbd.fifo) - 1)];
230 case LM832x_CMD_READ_ERROR:
231 return s->error;
233 case LM832x_CMD_READ_ROTATOR:
234 return 0;
236 case LM832x_CMD_READ_KEY_SIZE:
237 return s->kbd.size;
239 case LM832x_CMD_READ_CFG:
240 return s->config & 0xf;
242 case LM832x_CMD_READ_CLOCK:
243 return (s->clock & 0xfc) | 2;
245 default:
246 lm_kbd_error(s, ERR_CMDUNK);
247 fprintf(stderr, "%s: unknown command %02x\n", __func__, reg);
248 return 0x00;
251 return ret >> (byte << 3);
254 static void lm_kbd_write(LM823KbdState *s, int reg, int byte, uint8_t value)
256 switch (reg) {
257 case LM832x_CMD_WRITE_CFG:
258 s->config = value;
259 /* This must be done whenever s->mux.in is updated (never). */
260 if ((s->config >> 1) & 1) /* MUX1EN */
261 qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 0) & 1]);
262 if ((s->config >> 3) & 1) /* MUX2EN */
263 qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 2) & 1]);
264 /* TODO: check that this is issued only following the chip reset
265 * and not in the middle of operation and that it is followed by
266 * the GPIO ports re-resablishing through WRITE_PORT_SEL and
267 * WRITE_PORT_STATE (using a timer perhaps) and otherwise output
268 * warnings. */
269 s->status = 0;
270 lm_kbd_irq_update(s);
271 s->kbd.len = 0;
272 s->kbd.start = 0;
273 s->reg = LM832x_GENERAL_ERROR;
274 break;
276 case LM832x_CMD_RESET:
277 if (value == 0xaa)
278 lm_kbd_reset(DEVICE(s));
279 else
280 lm_kbd_error(s, ERR_BADPAR);
281 s->reg = LM832x_GENERAL_ERROR;
282 break;
284 case LM823x_CMD_WRITE_PULL_DOWN:
285 if (!byte)
286 s->gpio.pull = value;
287 else {
288 s->gpio.pull |= value << 8;
289 lm_kbd_gpio_update(s);
290 s->reg = LM832x_GENERAL_ERROR;
292 break;
293 case LM832x_CMD_WRITE_PORT_SEL:
294 if (!byte)
295 s->gpio.dir = value;
296 else {
297 s->gpio.dir |= value << 8;
298 lm_kbd_gpio_update(s);
299 s->reg = LM832x_GENERAL_ERROR;
301 break;
302 case LM832x_CMD_WRITE_PORT_STATE:
303 if (!byte)
304 s->gpio.mask = value;
305 else {
306 s->gpio.mask |= value << 8;
307 lm_kbd_gpio_update(s);
308 s->reg = LM832x_GENERAL_ERROR;
310 break;
312 case LM832x_CMD_SET_ACTIVE:
313 s->acttime = value;
314 s->reg = LM832x_GENERAL_ERROR;
315 break;
317 case LM832x_CMD_SET_DEBOUNCE:
318 s->kbd.dbnctime = value;
319 s->reg = LM832x_GENERAL_ERROR;
320 if (!value)
321 lm_kbd_error(s, ERR_BADPAR);
322 break;
324 case LM832x_CMD_SET_KEY_SIZE:
325 s->kbd.size = value;
326 s->reg = LM832x_GENERAL_ERROR;
327 if (
328 (value & 0xf) < 3 || (value & 0xf) > LM832x_MAX_KPY ||
329 (value >> 4) < 3 || (value >> 4) > LM832x_MAX_KPX)
330 lm_kbd_error(s, ERR_BADPAR);
331 break;
333 case LM832x_CMD_WRITE_CLOCK:
334 s->clock = value;
335 s->reg = LM832x_GENERAL_ERROR;
336 if ((value & 3) && (value & 3) != 3) {
337 lm_kbd_error(s, ERR_BADPAR);
338 fprintf(stderr, "%s: invalid clock setting in RCPWM\n",
339 __func__);
341 /* TODO: Validate that the command is only issued once */
342 break;
344 case LM832x_CMD_PWM_WRITE:
345 if (byte == 0) {
346 if (!(value & 3) || (value >> 2) > 59) {
347 lm_kbd_error(s, ERR_BADPAR);
348 s->reg = LM832x_GENERAL_ERROR;
349 break;
352 s->pwm.faddr = value;
353 s->pwm.file[s->pwm.faddr] = 0;
354 } else if (byte == 1) {
355 s->pwm.file[s->pwm.faddr] |= value << 8;
356 } else if (byte == 2) {
357 s->pwm.file[s->pwm.faddr] |= value << 0;
358 s->reg = LM832x_GENERAL_ERROR;
360 break;
361 case LM832x_CMD_PWM_START:
362 s->reg = LM832x_GENERAL_ERROR;
363 if (!(value & 3) || (value >> 2) > 59) {
364 lm_kbd_error(s, ERR_BADPAR);
365 break;
368 s->pwm.addr[(value & 3) - 1] = value >> 2;
369 lm_kbd_pwm_start(s, (value & 3) - 1);
370 break;
371 case LM832x_CMD_PWM_STOP:
372 s->reg = LM832x_GENERAL_ERROR;
373 if (!(value & 3)) {
374 lm_kbd_error(s, ERR_BADPAR);
375 break;
378 timer_del(s->pwm.tm[(value & 3) - 1]);
379 break;
381 case LM832x_GENERAL_ERROR:
382 lm_kbd_error(s, ERR_BADPAR);
383 break;
384 default:
385 lm_kbd_error(s, ERR_CMDUNK);
386 fprintf(stderr, "%s: unknown command %02x\n", __func__, reg);
387 break;
391 static int lm_i2c_event(I2CSlave *i2c, enum i2c_event event)
393 LM823KbdState *s = LM8323(i2c);
395 switch (event) {
396 case I2C_START_RECV:
397 case I2C_START_SEND:
398 s->i2c_cycle = 0;
399 s->i2c_dir = (event == I2C_START_SEND);
400 break;
402 default:
403 break;
406 return 0;
409 static uint8_t lm_i2c_rx(I2CSlave *i2c)
411 LM823KbdState *s = LM8323(i2c);
413 return lm_kbd_read(s, s->reg, s->i2c_cycle ++);
416 static int lm_i2c_tx(I2CSlave *i2c, uint8_t data)
418 LM823KbdState *s = LM8323(i2c);
420 if (!s->i2c_cycle)
421 s->reg = data;
422 else
423 lm_kbd_write(s, s->reg, s->i2c_cycle - 1, data);
424 s->i2c_cycle ++;
426 return 0;
429 static int lm_kbd_post_load(void *opaque, int version_id)
431 LM823KbdState *s = opaque;
433 lm_kbd_irq_update(s);
434 lm_kbd_gpio_update(s);
436 return 0;
439 static const VMStateDescription vmstate_lm_kbd = {
440 .name = "LM8323",
441 .version_id = 0,
442 .minimum_version_id = 0,
443 .post_load = lm_kbd_post_load,
444 .fields = (VMStateField[]) {
445 VMSTATE_I2C_SLAVE(parent_obj, LM823KbdState),
446 VMSTATE_UINT8(i2c_dir, LM823KbdState),
447 VMSTATE_UINT8(i2c_cycle, LM823KbdState),
448 VMSTATE_UINT8(reg, LM823KbdState),
449 VMSTATE_UINT8(config, LM823KbdState),
450 VMSTATE_UINT8(status, LM823KbdState),
451 VMSTATE_UINT8(acttime, LM823KbdState),
452 VMSTATE_UINT8(error, LM823KbdState),
453 VMSTATE_UINT8(clock, LM823KbdState),
454 VMSTATE_UINT16(gpio.pull, LM823KbdState),
455 VMSTATE_UINT16(gpio.mask, LM823KbdState),
456 VMSTATE_UINT16(gpio.dir, LM823KbdState),
457 VMSTATE_UINT16(gpio.level, LM823KbdState),
458 VMSTATE_UINT8(kbd.dbnctime, LM823KbdState),
459 VMSTATE_UINT8(kbd.size, LM823KbdState),
460 VMSTATE_UINT8(kbd.start, LM823KbdState),
461 VMSTATE_UINT8(kbd.len, LM823KbdState),
462 VMSTATE_BUFFER(kbd.fifo, LM823KbdState),
463 VMSTATE_UINT16_ARRAY(pwm.file, LM823KbdState, 256),
464 VMSTATE_UINT8(pwm.faddr, LM823KbdState),
465 VMSTATE_BUFFER(pwm.addr, LM823KbdState),
466 VMSTATE_TIMER_PTR_ARRAY(pwm.tm, LM823KbdState, 3),
467 VMSTATE_END_OF_LIST()
472 static void lm8323_realize(DeviceState *dev, Error **errp)
474 LM823KbdState *s = LM8323(dev);
476 s->model = 0x8323;
477 s->pwm.tm[0] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm0_tick, s);
478 s->pwm.tm[1] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm1_tick, s);
479 s->pwm.tm[2] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm2_tick, s);
480 qdev_init_gpio_out(dev, &s->nirq, 1);
483 void lm832x_key_event(DeviceState *dev, int key, int state)
485 LM823KbdState *s = LM8323(dev);
487 if ((s->status & INT_ERROR) && (s->error & ERR_FIFOOVR))
488 return;
490 if (s->kbd.len >= sizeof(s->kbd.fifo)) {
491 lm_kbd_error(s, ERR_FIFOOVR);
492 return;
495 s->kbd.fifo[(s->kbd.start + s->kbd.len ++) & (sizeof(s->kbd.fifo) - 1)] =
496 key | (state << 7);
498 /* We never set ERR_KEYOVR because we support multiple keys fine. */
499 s->status |= INT_KEYPAD;
500 lm_kbd_irq_update(s);
503 static void lm8323_class_init(ObjectClass *klass, void *data)
505 DeviceClass *dc = DEVICE_CLASS(klass);
506 I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
508 dc->reset = lm_kbd_reset;
509 dc->realize = lm8323_realize;
510 k->event = lm_i2c_event;
511 k->recv = lm_i2c_rx;
512 k->send = lm_i2c_tx;
513 dc->vmsd = &vmstate_lm_kbd;
516 static const TypeInfo lm8323_info = {
517 .name = TYPE_LM8323,
518 .parent = TYPE_I2C_SLAVE,
519 .instance_size = sizeof(LM823KbdState),
520 .class_init = lm8323_class_init,
523 static void lm832x_register_types(void)
525 type_register_static(&lm8323_info);
528 type_init(lm832x_register_types)