hw/misc/bcm2835_cprman.c

   1 /*
   2  * BCM2835 CPRMAN clock manager
   3  *
   4  * Copyright (c) 2020 Luc Michel <luc@lmichel.fr>
   5  *
   6  * SPDX-License-Identifier: GPL-2.0-or-later
   7  */
   8
   9 /*
  10  * This peripheral is roughly divided into 3 main parts:
  11  *   - the PLLs
  12  *   - the PLL channels
  13  *   - the clock muxes
  14  *
  15  * A main oscillator (xosc) feeds all the PLLs. Each PLLs has one or more
  16  * channels. Those channel are then connected to the clock muxes. Each mux has
  17  * multiples sources (usually the xosc, some of the PLL channels and some "test
  18  * debug" clocks). A mux is configured to select a given source through its
  19  * control register. Each mux has one output clock that also goes out of the
  20  * CPRMAN. This output clock usually connects to another peripheral in the SoC
  21  * (so a given mux is dedicated to a peripheral).
  22  *
  23  * At each level (PLL, channel and mux), the clock can be altered through
  24  * dividers (and multipliers in case of the PLLs), and can be disabled (in this
  25  * case, the next levels see no clock).
  26  *
  27  * This can be sum-up as follows (this is an example and not the actual BCM2835
  28  * clock tree):
  29  *
  30  *          /-->[PLL]-|->[PLL channel]--...            [mux]--> to peripherals
  31  *          |         |->[PLL channel]  muxes takes    [mux]
  32  *          |         \->[PLL channel]  inputs from    [mux]
  33  *          |                           some channels  [mux]
  34  * [xosc]---|-->[PLL]-|->[PLL channel]  and other srcs [mux]
  35  *          |         \->[PLL channel]           ...-->[mux]
  36  *          |                                          [mux]
  37  *          \-->[PLL]--->[PLL channel]                 [mux]
  38  *
  39  * The page at https://elinux.org/The_Undocumented_Pi gives the actual clock
  40  * tree configuration.
  41  *
  42  * The CPRMAN exposes clock outputs with the name of the clock mux suffixed
  43  * with "-out" (e.g. "uart-out", "h264-out", ...).
  44  */
  45
  46 #include "qemu/osdep.h"
  47 #include "qemu/log.h"
  48 #include "migration/vmstate.h"
  49 #include "hw/qdev-properties.h"
  50 #include "hw/misc/bcm2835_cprman.h"
  51 #include "hw/misc/bcm2835_cprman_internals.h"
  52 #include "trace.h"
  53
  54 /* PLL */
  55
  56 static void pll_reset(DeviceState *dev)
  57 {
  58     CprmanPllState *s = CPRMAN_PLL(dev);
  59     const PLLResetInfo *info = &PLL_RESET_INFO[s->id];
  60
  61     *s->reg_cm = info->cm;
  62     *s->reg_a2w_ctrl = info->a2w_ctrl;
  63     memcpy(s->reg_a2w_ana, info->a2w_ana, sizeof(info->a2w_ana));
  64     *s->reg_a2w_frac = info->a2w_frac;
  65 }
  66
  67 static bool pll_is_locked(const CprmanPllState *pll)
  68 {
  69     return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN)
  70         && !FIELD_EX32(*pll->reg_cm, CM_PLLx, ANARST);
  71 }
  72
  73 static void pll_update(CprmanPllState *pll)
  74 {
  75     uint64_t freq, ndiv, fdiv, pdiv;
  76
  77     if (!pll_is_locked(pll)) {
  78         clock_update(pll->out, 0);
  79         return;
  80     }
  81
  82     pdiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PDIV);
  83
  84     if (!pdiv) {
  85         clock_update(pll->out, 0);
  86         return;
  87     }
  88
  89     ndiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, NDIV);
  90     fdiv = FIELD_EX32(*pll->reg_a2w_frac, A2W_PLLx_FRAC, FRAC);
  91
  92     if (pll->reg_a2w_ana[1] & pll->prediv_mask) {
  93         /* The prescaler doubles the parent frequency */
  94         ndiv *= 2;
  95         fdiv *= 2;
  96     }
  97
  98     /*
  99      * We have a multiplier with an integer part (ndiv) and a fractional part
 100      * (fdiv), and a divider (pdiv).
 101      */
 102     freq = clock_get_hz(pll->xosc_in) *
 103         ((ndiv << R_A2W_PLLx_FRAC_FRAC_LENGTH) + fdiv);
 104     freq /= pdiv;
 105     freq >>= R_A2W_PLLx_FRAC_FRAC_LENGTH;
 106
 107     clock_update_hz(pll->out, freq);
 108 }
 109
 110 static void pll_xosc_update(void *opaque, ClockEvent event)
 111 {
 112     pll_update(CPRMAN_PLL(opaque));
 113 }
 114
 115 static void pll_init(Object *obj)
 116 {
 117     CprmanPllState *s = CPRMAN_PLL(obj);
 118
 119     s->xosc_in = qdev_init_clock_in(DEVICE(s), "xosc-in", pll_xosc_update,
 120                                     s, ClockUpdate);
 121     s->out = qdev_init_clock_out(DEVICE(s), "out");
 122 }
 123
 124 static const VMStateDescription pll_vmstate = {
 125     .name = TYPE_CPRMAN_PLL,
 126     .version_id = 1,
 127     .minimum_version_id = 1,
 128     .fields = (VMStateField[]) {
 129         VMSTATE_CLOCK(xosc_in, CprmanPllState),
 130         VMSTATE_END_OF_LIST()
 131     }
 132 };
 133
 134 static void pll_class_init(ObjectClass *klass, void *data)
 135 {
 136     DeviceClass *dc = DEVICE_CLASS(klass);
 137
 138     dc->reset = pll_reset;
 139     dc->vmsd = &pll_vmstate;
 140 }
 141
 142 static const TypeInfo cprman_pll_info = {
 143     .name = TYPE_CPRMAN_PLL,
 144     .parent = TYPE_DEVICE,
 145     .instance_size = sizeof(CprmanPllState),
 146     .class_init = pll_class_init,
 147     .instance_init = pll_init,
 148 };
 149
 150
 151 /* PLL channel */
 152
 153 static void pll_channel_reset(DeviceState *dev)
 154 {
 155     CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(dev);
 156     const PLLChannelResetInfo *info = &PLL_CHANNEL_RESET_INFO[s->id];
 157
 158     *s->reg_a2w_ctrl = info->a2w_ctrl;
 159 }
 160
 161 static bool pll_channel_is_enabled(CprmanPllChannelState *channel)
 162 {
 163     /*
 164      * XXX I'm not sure of the purpose of the LOAD field. The Linux driver does
 165      * not set it when enabling the channel, but does clear it when disabling
 166      * it.
 167      */
 168     return !FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DISABLE)
 169         && !(*channel->reg_cm & channel->hold_mask);
 170 }
 171
 172 static void pll_channel_update(CprmanPllChannelState *channel)
 173 {
 174     uint64_t freq, div;
 175
 176     if (!pll_channel_is_enabled(channel)) {
 177         clock_update(channel->out, 0);
 178         return;
 179     }
 180
 181     div = FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DIV);
 182
 183     if (!div) {
 184         /*
 185          * It seems that when the divider value is 0, it is considered as
 186          * being maximum by the hardware (see the Linux driver).
 187          */
 188         div = R_A2W_PLLx_CHANNELy_DIV_MASK;
 189     }
 190
 191     /* Some channels have an additional fixed divider */
 192     freq = clock_get_hz(channel->pll_in) / (div * channel->fixed_divider);
 193
 194     clock_update_hz(channel->out, freq);
 195 }
 196
 197 /* Update a PLL and all its channels */
 198 static void pll_update_all_channels(BCM2835CprmanState *s,
 199                                     CprmanPllState *pll)
 200 {
 201     size_t i;
 202
 203     pll_update(pll);
 204
 205     for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) {
 206         CprmanPllChannelState *channel = &s->channels[i];
 207         if (channel->parent == pll->id) {
 208             pll_channel_update(channel);
 209         }
 210     }
 211 }
 212
 213 static void pll_channel_pll_in_update(void *opaque, ClockEvent event)
 214 {
 215     pll_channel_update(CPRMAN_PLL_CHANNEL(opaque));
 216 }
 217
 218 static void pll_channel_init(Object *obj)
 219 {
 220     CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(obj);
 221
 222     s->pll_in = qdev_init_clock_in(DEVICE(s), "pll-in",
 223                                    pll_channel_pll_in_update, s,
 224                                    ClockUpdate);
 225     s->out = qdev_init_clock_out(DEVICE(s), "out");
 226 }
 227
 228 static const VMStateDescription pll_channel_vmstate = {
 229     .name = TYPE_CPRMAN_PLL_CHANNEL,
 230     .version_id = 1,
 231     .minimum_version_id = 1,
 232     .fields = (VMStateField[]) {
 233         VMSTATE_CLOCK(pll_in, CprmanPllChannelState),
 234         VMSTATE_END_OF_LIST()
 235     }
 236 };
 237
 238 static void pll_channel_class_init(ObjectClass *klass, void *data)
 239 {
 240     DeviceClass *dc = DEVICE_CLASS(klass);
 241
 242     dc->reset = pll_channel_reset;
 243     dc->vmsd = &pll_channel_vmstate;
 244 }
 245
 246 static const TypeInfo cprman_pll_channel_info = {
 247     .name = TYPE_CPRMAN_PLL_CHANNEL,
 248     .parent = TYPE_DEVICE,
 249     .instance_size = sizeof(CprmanPllChannelState),
 250     .class_init = pll_channel_class_init,
 251     .instance_init = pll_channel_init,
 252 };
 253
 254
 255 /* clock mux */
 256
 257 static bool clock_mux_is_enabled(CprmanClockMuxState *mux)
 258 {
 259     return FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, ENABLE);
 260 }
 261
 262 static void clock_mux_update(CprmanClockMuxState *mux)
 263 {
 264     uint64_t freq;
 265     uint32_t div, src = FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, SRC);
 266     bool enabled = clock_mux_is_enabled(mux);
 267
 268     *mux->reg_ctl = FIELD_DP32(*mux->reg_ctl, CM_CLOCKx_CTL, BUSY, enabled);
 269
 270     if (!enabled) {
 271         clock_update(mux->out, 0);
 272         return;
 273     }
 274
 275     freq = clock_get_hz(mux->srcs[src]);
 276
 277     if (mux->int_bits == 0 && mux->frac_bits == 0) {
 278         clock_update_hz(mux->out, freq);
 279         return;
 280     }
 281
 282     /*
 283      * The divider has an integer and a fractional part. The size of each part
 284      * varies with the muxes (int_bits and frac_bits). Both parts are
 285      * concatenated, with the integer part always starting at bit 12.
 286      *
 287      *         31          12 11          0
 288      *        ------------------------------
 289      * CM_DIV |      |  int  |  frac  |    |
 290      *        ------------------------------
 291      *                <-----> <------>
 292      *                int_bits frac_bits
 293      */
 294     div = extract32(*mux->reg_div,
 295                     R_CM_CLOCKx_DIV_FRAC_LENGTH - mux->frac_bits,
 296                     mux->int_bits + mux->frac_bits);
 297
 298     if (!div) {
 299         clock_update(mux->out, 0);
 300         return;
 301     }
 302
 303     freq = muldiv64(freq, 1 << mux->frac_bits, div);
 304
 305     clock_update_hz(mux->out, freq);
 306 }
 307
 308 static void clock_mux_src_update(void *opaque, ClockEvent event)
 309 {
 310     CprmanClockMuxState **backref = opaque;
 311     CprmanClockMuxState *s = *backref;
 312     CprmanClockMuxSource src = backref - s->backref;
 313
 314     if (FIELD_EX32(*s->reg_ctl, CM_CLOCKx_CTL, SRC) != src) {
 315         return;
 316     }
 317
 318     clock_mux_update(s);
 319 }
 320
 321 static void clock_mux_reset(DeviceState *dev)
 322 {
 323     CprmanClockMuxState *clock = CPRMAN_CLOCK_MUX(dev);
 324     const ClockMuxResetInfo *info = &CLOCK_MUX_RESET_INFO[clock->id];
 325
 326     *clock->reg_ctl = info->cm_ctl;
 327     *clock->reg_div = info->cm_div;
 328 }
 329
 330 static void clock_mux_init(Object *obj)
 331 {
 332     CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj);
 333     size_t i;
 334
 335     for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) {
 336         char *name = g_strdup_printf("srcs[%zu]", i);
 337         s->backref[i] = s;
 338         s->srcs[i] = qdev_init_clock_in(DEVICE(s), name,
 339                                         clock_mux_src_update,
 340                                         &s->backref[i],
 341                                         ClockUpdate);
 342         g_free(name);
 343     }
 344
 345     s->out = qdev_init_clock_out(DEVICE(s), "out");
 346 }
 347
 348 static const VMStateDescription clock_mux_vmstate = {
 349     .name = TYPE_CPRMAN_CLOCK_MUX,
 350     .version_id = 1,
 351     .minimum_version_id = 1,
 352     .fields = (VMStateField[]) {
 353         VMSTATE_ARRAY_CLOCK(srcs, CprmanClockMuxState,
 354                             CPRMAN_NUM_CLOCK_MUX_SRC),
 355         VMSTATE_END_OF_LIST()
 356     }
 357 };
 358
 359 static void clock_mux_class_init(ObjectClass *klass, void *data)
 360 {
 361     DeviceClass *dc = DEVICE_CLASS(klass);
 362
 363     dc->reset = clock_mux_reset;
 364     dc->vmsd = &clock_mux_vmstate;
 365 }
 366
 367 static const TypeInfo cprman_clock_mux_info = {
 368     .name = TYPE_CPRMAN_CLOCK_MUX,
 369     .parent = TYPE_DEVICE,
 370     .instance_size = sizeof(CprmanClockMuxState),
 371     .class_init = clock_mux_class_init,
 372     .instance_init = clock_mux_init,
 373 };
 374
 375
 376 /* DSI0HSCK mux */
 377
 378 static void dsi0hsck_mux_update(CprmanDsi0HsckMuxState *s)
 379 {
 380     bool src_is_plld = FIELD_EX32(*s->reg_cm, CM_DSI0HSCK, SELPLLD);
 381     Clock *src = src_is_plld ? s->plld_in : s->plla_in;
 382
 383     clock_update(s->out, clock_get(src));
 384 }
 385
 386 static void dsi0hsck_mux_in_update(void *opaque, ClockEvent event)
 387 {
 388     dsi0hsck_mux_update(CPRMAN_DSI0HSCK_MUX(opaque));
 389 }
 390
 391 static void dsi0hsck_mux_init(Object *obj)
 392 {
 393     CprmanDsi0HsckMuxState *s = CPRMAN_DSI0HSCK_MUX(obj);
 394     DeviceState *dev = DEVICE(obj);
 395
 396     s->plla_in = qdev_init_clock_in(dev, "plla-in", dsi0hsck_mux_in_update,
 397                                     s, ClockUpdate);
 398     s->plld_in = qdev_init_clock_in(dev, "plld-in", dsi0hsck_mux_in_update,
 399                                     s, ClockUpdate);
 400     s->out = qdev_init_clock_out(DEVICE(s), "out");
 401 }
 402
 403 static const VMStateDescription dsi0hsck_mux_vmstate = {
 404     .name = TYPE_CPRMAN_DSI0HSCK_MUX,
 405     .version_id = 1,
 406     .minimum_version_id = 1,
 407     .fields = (VMStateField[]) {
 408         VMSTATE_CLOCK(plla_in, CprmanDsi0HsckMuxState),
 409         VMSTATE_CLOCK(plld_in, CprmanDsi0HsckMuxState),
 410         VMSTATE_END_OF_LIST()
 411     }
 412 };
 413
 414 static void dsi0hsck_mux_class_init(ObjectClass *klass, void *data)
 415 {
 416     DeviceClass *dc = DEVICE_CLASS(klass);
 417
 418     dc->vmsd = &dsi0hsck_mux_vmstate;
 419 }
 420
 421 static const TypeInfo cprman_dsi0hsck_mux_info = {
 422     .name = TYPE_CPRMAN_DSI0HSCK_MUX,
 423     .parent = TYPE_DEVICE,
 424     .instance_size = sizeof(CprmanDsi0HsckMuxState),
 425     .class_init = dsi0hsck_mux_class_init,
 426     .instance_init = dsi0hsck_mux_init,
 427 };
 428
 429
 430 /* CPRMAN "top level" model */
 431
 432 static uint32_t get_cm_lock(const BCM2835CprmanState *s)
 433 {
 434     static const int CM_LOCK_MAPPING[CPRMAN_NUM_PLL] = {
 435         [CPRMAN_PLLA] = R_CM_LOCK_FLOCKA_SHIFT,
 436         [CPRMAN_PLLC] = R_CM_LOCK_FLOCKC_SHIFT,
 437         [CPRMAN_PLLD] = R_CM_LOCK_FLOCKD_SHIFT,
 438         [CPRMAN_PLLH] = R_CM_LOCK_FLOCKH_SHIFT,
 439         [CPRMAN_PLLB] = R_CM_LOCK_FLOCKB_SHIFT,
 440     };
 441
 442     uint32_t r = 0;
 443     size_t i;
 444
 445     for (i = 0; i < CPRMAN_NUM_PLL; i++) {
 446         r |= pll_is_locked(&s->plls[i]) << CM_LOCK_MAPPING[i];
 447     }
 448
 449     return r;
 450 }
 451
 452 static uint64_t cprman_read(void *opaque, hwaddr offset,
 453                             unsigned size)
 454 {
 455     BCM2835CprmanState *s = CPRMAN(opaque);
 456     uint64_t r = 0;
 457     size_t idx = offset / sizeof(uint32_t);
 458
 459     switch (idx) {
 460     case R_CM_LOCK:
 461         r = get_cm_lock(s);
 462         break;
 463
 464     default:
 465         r = s->regs[idx];
 466     }
 467
 468     trace_bcm2835_cprman_read(offset, r);
 469     return r;
 470 }
 471
 472 static inline void update_pll_and_channels_from_cm(BCM2835CprmanState *s,
 473                                                    size_t idx)
 474 {
 475     size_t i;
 476
 477     for (i = 0; i < CPRMAN_NUM_PLL; i++) {
 478         if (PLL_INIT_INFO[i].cm_offset == idx) {
 479             pll_update_all_channels(s, &s->plls[i]);
 480             return;
 481         }
 482     }
 483 }
 484
 485 static inline void update_channel_from_a2w(BCM2835CprmanState *s, size_t idx)
 486 {
 487     size_t i;
 488
 489     for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) {
 490         if (PLL_CHANNEL_INIT_INFO[i].a2w_ctrl_offset == idx) {
 491             pll_channel_update(&s->channels[i]);
 492             return;
 493         }
 494     }
 495 }
 496
 497 static inline void update_mux_from_cm(BCM2835CprmanState *s, size_t idx)
 498 {
 499     size_t i;
 500
 501     for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) {
 502         if ((CLOCK_MUX_INIT_INFO[i].cm_offset == idx) ||
 503             (CLOCK_MUX_INIT_INFO[i].cm_offset + 4 == idx)) {
 504             /* matches CM_CTL or CM_DIV mux register */
 505             clock_mux_update(&s->clock_muxes[i]);
 506             return;
 507         }
 508     }
 509 }
 510
 511 #define CASE_PLL_A2W_REGS(pll_) \
 512     case R_A2W_ ## pll_ ## _CTRL: \
 513     case R_A2W_ ## pll_ ## _ANA0: \
 514     case R_A2W_ ## pll_ ## _ANA1: \
 515     case R_A2W_ ## pll_ ## _ANA2: \
 516     case R_A2W_ ## pll_ ## _ANA3: \
 517     case R_A2W_ ## pll_ ## _FRAC
 518
 519 static void cprman_write(void *opaque, hwaddr offset,
 520                          uint64_t value, unsigned size)
 521 {
 522     BCM2835CprmanState *s = CPRMAN(opaque);
 523     size_t idx = offset / sizeof(uint32_t);
 524
 525     if (FIELD_EX32(value, CPRMAN, PASSWORD) != CPRMAN_PASSWORD) {
 526         trace_bcm2835_cprman_write_invalid_magic(offset, value);
 527         return;
 528     }
 529
 530     value &= ~R_CPRMAN_PASSWORD_MASK;
 531
 532     trace_bcm2835_cprman_write(offset, value);
 533     s->regs[idx] = value;
 534
 535     switch (idx) {
 536     case R_CM_PLLA ... R_CM_PLLH:
 537     case R_CM_PLLB:
 538         /*
 539          * A given CM_PLLx register is shared by both the PLL and the channels
 540          * of this PLL.
 541          */
 542         update_pll_and_channels_from_cm(s, idx);
 543         break;
 544
 545     CASE_PLL_A2W_REGS(PLLA) :
 546         pll_update(&s->plls[CPRMAN_PLLA]);
 547         break;
 548
 549     CASE_PLL_A2W_REGS(PLLC) :
 550         pll_update(&s->plls[CPRMAN_PLLC]);
 551         break;
 552
 553     CASE_PLL_A2W_REGS(PLLD) :
 554         pll_update(&s->plls[CPRMAN_PLLD]);
 555         break;
 556
 557     CASE_PLL_A2W_REGS(PLLH) :
 558         pll_update(&s->plls[CPRMAN_PLLH]);
 559         break;
 560
 561     CASE_PLL_A2W_REGS(PLLB) :
 562         pll_update(&s->plls[CPRMAN_PLLB]);
 563         break;
 564
 565     case R_A2W_PLLA_DSI0:
 566     case R_A2W_PLLA_CORE:
 567     case R_A2W_PLLA_PER:
 568     case R_A2W_PLLA_CCP2:
 569     case R_A2W_PLLC_CORE2:
 570     case R_A2W_PLLC_CORE1:
 571     case R_A2W_PLLC_PER:
 572     case R_A2W_PLLC_CORE0:
 573     case R_A2W_PLLD_DSI0:
 574     case R_A2W_PLLD_CORE:
 575     case R_A2W_PLLD_PER:
 576     case R_A2W_PLLD_DSI1:
 577     case R_A2W_PLLH_AUX:
 578     case R_A2W_PLLH_RCAL:
 579     case R_A2W_PLLH_PIX:
 580     case R_A2W_PLLB_ARM:
 581         update_channel_from_a2w(s, idx);
 582         break;
 583
 584     case R_CM_GNRICCTL ... R_CM_SMIDIV:
 585     case R_CM_TCNTCNT ... R_CM_VECDIV:
 586     case R_CM_PULSECTL ... R_CM_PULSEDIV:
 587     case R_CM_SDCCTL ... R_CM_ARMCTL:
 588     case R_CM_AVEOCTL ... R_CM_EMMCDIV:
 589     case R_CM_EMMC2CTL ... R_CM_EMMC2DIV:
 590         update_mux_from_cm(s, idx);
 591         break;
 592
 593     case R_CM_DSI0HSCK:
 594         dsi0hsck_mux_update(&s->dsi0hsck_mux);
 595         break;
 596     }
 597 }
 598
 599 #undef CASE_PLL_A2W_REGS
 600
 601 static const MemoryRegionOps cprman_ops = {
 602     .read = cprman_read,
 603     .write = cprman_write,
 604     .endianness = DEVICE_LITTLE_ENDIAN,
 605     .valid = {
 606         /*
 607          * Although this hasn't been checked against real hardware, nor the
 608          * information can be found in a datasheet, it seems reasonable because
 609          * of the "PASSWORD" magic value found in every registers.
 610          */
 611         .min_access_size        = 4,
 612         .max_access_size        = 4,
 613         .unaligned              = false,
 614     },
 615     .impl = {
 616         .max_access_size = 4,
 617     },
 618 };
 619
 620 static void cprman_reset(DeviceState *dev)
 621 {
 622     BCM2835CprmanState *s = CPRMAN(dev);
 623     size_t i;
 624
 625     memset(s->regs, 0, sizeof(s->regs));
 626
 627     for (i = 0; i < CPRMAN_NUM_PLL; i++) {
 628         device_cold_reset(DEVICE(&s->plls[i]));
 629     }
 630
 631     for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) {
 632         device_cold_reset(DEVICE(&s->channels[i]));
 633     }
 634
 635     device_cold_reset(DEVICE(&s->dsi0hsck_mux));
 636
 637     for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) {
 638         device_cold_reset(DEVICE(&s->clock_muxes[i]));
 639     }
 640
 641     clock_update_hz(s->xosc, s->xosc_freq);
 642 }
 643
 644 static void cprman_init(Object *obj)
 645 {
 646     BCM2835CprmanState *s = CPRMAN(obj);
 647     size_t i;
 648
 649     for (i = 0; i < CPRMAN_NUM_PLL; i++) {
 650         object_initialize_child(obj, PLL_INIT_INFO[i].name,
 651                                 &s->plls[i], TYPE_CPRMAN_PLL);
 652         set_pll_init_info(s, &s->plls[i], i);
 653     }
 654
 655     for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) {
 656         object_initialize_child(obj, PLL_CHANNEL_INIT_INFO[i].name,
 657                                 &s->channels[i],
 658                                 TYPE_CPRMAN_PLL_CHANNEL);
 659         set_pll_channel_init_info(s, &s->channels[i], i);
 660     }
 661
 662     object_initialize_child(obj, "dsi0hsck-mux",
 663                             &s->dsi0hsck_mux, TYPE_CPRMAN_DSI0HSCK_MUX);
 664     s->dsi0hsck_mux.reg_cm = &s->regs[R_CM_DSI0HSCK];
 665
 666     for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) {
 667         char *alias;
 668
 669         object_initialize_child(obj, CLOCK_MUX_INIT_INFO[i].name,
 670                                 &s->clock_muxes[i],
 671                                 TYPE_CPRMAN_CLOCK_MUX);
 672         set_clock_mux_init_info(s, &s->clock_muxes[i], i);
 673
 674         /* Expose muxes output as CPRMAN outputs */
 675         alias = g_strdup_printf("%s-out", CLOCK_MUX_INIT_INFO[i].name);
 676         qdev_alias_clock(DEVICE(&s->clock_muxes[i]), "out", DEVICE(obj), alias);
 677         g_free(alias);
 678     }
 679
 680     s->xosc = clock_new(obj, "xosc");
 681     s->gnd = clock_new(obj, "gnd");
 682
 683     clock_set(s->gnd, 0);
 684
 685     memory_region_init_io(&s->iomem, obj, &cprman_ops,
 686                           s, "bcm2835-cprman", 0x2000);
 687     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
 688 }
 689
 690 static void connect_mux_sources(BCM2835CprmanState *s,
 691                                 CprmanClockMuxState *mux,
 692                                 const CprmanPllChannel *clk_mapping)
 693 {
 694     size_t i;
 695     Clock *td0 = s->clock_muxes[CPRMAN_CLOCK_TD0].out;
 696     Clock *td1 = s->clock_muxes[CPRMAN_CLOCK_TD1].out;
 697
 698     /* For sources from 0 to 3. Source 4 to 9 are mux specific */
 699     Clock * const CLK_SRC_MAPPING[] = {
 700         [CPRMAN_CLOCK_SRC_GND] = s->gnd,
 701         [CPRMAN_CLOCK_SRC_XOSC] = s->xosc,
 702         [CPRMAN_CLOCK_SRC_TD0] = td0,
 703         [CPRMAN_CLOCK_SRC_TD1] = td1,
 704     };
 705
 706     for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) {
 707         CprmanPllChannel mapping = clk_mapping[i];
 708         Clock *src;
 709
 710         if (mapping == CPRMAN_CLOCK_SRC_FORCE_GROUND) {
 711             src = s->gnd;
 712         } else if (mapping == CPRMAN_CLOCK_SRC_DSI0HSCK) {
 713             src = s->dsi0hsck_mux.out;
 714         } else if (i < CPRMAN_CLOCK_SRC_PLLA) {
 715             src = CLK_SRC_MAPPING[i];
 716         } else {
 717             src = s->channels[mapping].out;
 718         }
 719
 720         clock_set_source(mux->srcs[i], src);
 721     }
 722 }
 723
 724 static void cprman_realize(DeviceState *dev, Error **errp)
 725 {
 726     BCM2835CprmanState *s = CPRMAN(dev);
 727     size_t i;
 728
 729     for (i = 0; i < CPRMAN_NUM_PLL; i++) {
 730         CprmanPllState *pll = &s->plls[i];
 731
 732         clock_set_source(pll->xosc_in, s->xosc);
 733
 734         if (!qdev_realize(DEVICE(pll), NULL, errp)) {
 735             return;
 736         }
 737     }
 738
 739     for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) {
 740         CprmanPllChannelState *channel = &s->channels[i];
 741         CprmanPll parent = PLL_CHANNEL_INIT_INFO[i].parent;
 742         Clock *parent_clk = s->plls[parent].out;
 743
 744         clock_set_source(channel->pll_in, parent_clk);
 745
 746         if (!qdev_realize(DEVICE(channel), NULL, errp)) {
 747             return;
 748         }
 749     }
 750
 751     clock_set_source(s->dsi0hsck_mux.plla_in,
 752                      s->channels[CPRMAN_PLLA_CHANNEL_DSI0].out);
 753     clock_set_source(s->dsi0hsck_mux.plld_in,
 754                      s->channels[CPRMAN_PLLD_CHANNEL_DSI0].out);
 755
 756     if (!qdev_realize(DEVICE(&s->dsi0hsck_mux), NULL, errp)) {
 757         return;
 758     }
 759
 760     for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) {
 761         CprmanClockMuxState *clock_mux = &s->clock_muxes[i];
 762
 763         connect_mux_sources(s, clock_mux, CLOCK_MUX_INIT_INFO[i].src_mapping);
 764
 765         if (!qdev_realize(DEVICE(clock_mux), NULL, errp)) {
 766             return;
 767         }
 768     }
 769 }
 770
 771 static const VMStateDescription cprman_vmstate = {
 772     .name = TYPE_BCM2835_CPRMAN,
 773     .version_id = 1,
 774     .minimum_version_id = 1,
 775     .fields = (VMStateField[]) {
 776         VMSTATE_UINT32_ARRAY(regs, BCM2835CprmanState, CPRMAN_NUM_REGS),
 777         VMSTATE_END_OF_LIST()
 778     }
 779 };
 780
 781 static Property cprman_properties[] = {
 782     DEFINE_PROP_UINT32("xosc-freq-hz", BCM2835CprmanState, xosc_freq, 19200000),
 783     DEFINE_PROP_END_OF_LIST()
 784 };
 785
 786 static void cprman_class_init(ObjectClass *klass, void *data)
 787 {
 788     DeviceClass *dc = DEVICE_CLASS(klass);
 789
 790     dc->realize = cprman_realize;
 791     dc->reset = cprman_reset;
 792     dc->vmsd = &cprman_vmstate;
 793     device_class_set_props(dc, cprman_properties);
 794 }
 795
 796 static const TypeInfo cprman_info = {
 797     .name = TYPE_BCM2835_CPRMAN,
 798     .parent = TYPE_SYS_BUS_DEVICE,
 799     .instance_size = sizeof(BCM2835CprmanState),
 800     .class_init = cprman_class_init,
 801     .instance_init = cprman_init,
 802 };
 803
 804 static void cprman_register_types(void)
 805 {
 806     type_register_static(&cprman_info);
 807     type_register_static(&cprman_pll_info);
 808     type_register_static(&cprman_pll_channel_info);
 809     type_register_static(&cprman_clock_mux_info);
 810     type_register_static(&cprman_dsi0hsck_mux_info);
 811 }
 812
 813 type_init(cprman_register_types);