hw/misc/tz-mpc.c

   1 /*
   2  * ARM AHB5 TrustZone Memory Protection Controller emulation
   3  *
   4  * Copyright (c) 2018 Linaro Limited
   5  * Written by Peter Maydell
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 or
   9  * (at your option) any later version.
  10  */
  11
  12 #include "qemu/osdep.h"
  13 #include "qemu/log.h"
  14 #include "qemu/module.h"
  15 #include "qapi/error.h"
  16 #include "trace.h"
  17 #include "hw/sysbus.h"
  18 #include "migration/vmstate.h"
  19 #include "hw/registerfields.h"
  20 #include "hw/irq.h"
  21 #include "hw/misc/tz-mpc.h"
  22 #include "hw/qdev-properties.h"
  23
  24 /* Our IOMMU has two IOMMU indexes, one for secure transactions and one for
  25  * non-secure transactions.
  26  */
  27 enum {
  28     IOMMU_IDX_S,
  29     IOMMU_IDX_NS,
  30     IOMMU_NUM_INDEXES,
  31 };
  32
  33 /* Config registers */
  34 REG32(CTRL, 0x00)
  35     FIELD(CTRL, SEC_RESP, 4, 1)
  36     FIELD(CTRL, AUTOINC, 8, 1)
  37     FIELD(CTRL, LOCKDOWN, 31, 1)
  38 REG32(BLK_MAX, 0x10)
  39 REG32(BLK_CFG, 0x14)
  40 REG32(BLK_IDX, 0x18)
  41 REG32(BLK_LUT, 0x1c)
  42 REG32(INT_STAT, 0x20)
  43     FIELD(INT_STAT, IRQ, 0, 1)
  44 REG32(INT_CLEAR, 0x24)
  45     FIELD(INT_CLEAR, IRQ, 0, 1)
  46 REG32(INT_EN, 0x28)
  47     FIELD(INT_EN, IRQ, 0, 1)
  48 REG32(INT_INFO1, 0x2c)
  49 REG32(INT_INFO2, 0x30)
  50     FIELD(INT_INFO2, HMASTER, 0, 16)
  51     FIELD(INT_INFO2, HNONSEC, 16, 1)
  52     FIELD(INT_INFO2, CFG_NS, 17, 1)
  53 REG32(INT_SET, 0x34)
  54     FIELD(INT_SET, IRQ, 0, 1)
  55 REG32(PIDR4, 0xfd0)
  56 REG32(PIDR5, 0xfd4)
  57 REG32(PIDR6, 0xfd8)
  58 REG32(PIDR7, 0xfdc)
  59 REG32(PIDR0, 0xfe0)
  60 REG32(PIDR1, 0xfe4)
  61 REG32(PIDR2, 0xfe8)
  62 REG32(PIDR3, 0xfec)
  63 REG32(CIDR0, 0xff0)
  64 REG32(CIDR1, 0xff4)
  65 REG32(CIDR2, 0xff8)
  66 REG32(CIDR3, 0xffc)
  67
  68 static const uint8_t tz_mpc_idregs[] = {
  69     0x04, 0x00, 0x00, 0x00,
  70     0x60, 0xb8, 0x1b, 0x00,
  71     0x0d, 0xf0, 0x05, 0xb1,
  72 };
  73
  74 static void tz_mpc_irq_update(TZMPC *s)
  75 {
  76     qemu_set_irq(s->irq, s->int_stat && s->int_en);
  77 }
  78
  79 static void tz_mpc_iommu_notify(TZMPC *s, uint32_t lutidx,
  80                                 uint32_t oldlut, uint32_t newlut)
  81 {
  82     /* Called when the LUT word at lutidx has changed from oldlut to newlut;
  83      * must call the IOMMU notifiers for the changed blocks.
  84      */
  85     IOMMUTLBEntry entry = {
  86         .addr_mask = s->blocksize - 1,
  87     };
  88     hwaddr addr = lutidx * s->blocksize * 32;
  89     int i;
  90
  91     for (i = 0; i < 32; i++, addr += s->blocksize) {
  92         bool block_is_ns;
  93
  94         if (!((oldlut ^ newlut) & (1 << i))) {
  95             continue;
  96         }
  97         /* This changes the mappings for both the S and the NS space,
  98          * so we need to do four notifies: an UNMAP then a MAP for each.
  99          */
 100         block_is_ns = newlut & (1 << i);
 101
 102         trace_tz_mpc_iommu_notify(addr);
 103         entry.iova = addr;
 104         entry.translated_addr = addr;
 105
 106         entry.perm = IOMMU_NONE;
 107         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, entry);
 108         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, entry);
 109
 110         entry.perm = IOMMU_RW;
 111         if (block_is_ns) {
 112             entry.target_as = &s->blocked_io_as;
 113         } else {
 114             entry.target_as = &s->downstream_as;
 115         }
 116         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, entry);
 117         if (block_is_ns) {
 118             entry.target_as = &s->downstream_as;
 119         } else {
 120             entry.target_as = &s->blocked_io_as;
 121         }
 122         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, entry);
 123     }
 124 }
 125
 126 static void tz_mpc_autoinc_idx(TZMPC *s, unsigned access_size)
 127 {
 128     /* Auto-increment BLK_IDX if necessary */
 129     if (access_size == 4 && (s->ctrl & R_CTRL_AUTOINC_MASK)) {
 130         s->blk_idx++;
 131         s->blk_idx %= s->blk_max;
 132     }
 133 }
 134
 135 static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr,
 136                                    uint64_t *pdata,
 137                                    unsigned size, MemTxAttrs attrs)
 138 {
 139     TZMPC *s = TZ_MPC(opaque);
 140     uint64_t r;
 141     uint32_t offset = addr & ~0x3;
 142
 143     if (!attrs.secure && offset < A_PIDR4) {
 144         /* NS accesses can only see the ID registers */
 145         qemu_log_mask(LOG_GUEST_ERROR,
 146                       "TZ MPC register read: NS access to offset 0x%x\n",
 147                       offset);
 148         r = 0;
 149         goto read_out;
 150     }
 151
 152     switch (offset) {
 153     case A_CTRL:
 154         r = s->ctrl;
 155         break;
 156     case A_BLK_MAX:
 157         r = s->blk_max - 1;
 158         break;
 159     case A_BLK_CFG:
 160         /* We are never in "init in progress state", so this just indicates
 161          * the block size. s->blocksize == (1 << BLK_CFG + 5), so
 162          * BLK_CFG == ctz32(s->blocksize) - 5
 163          */
 164         r = ctz32(s->blocksize) - 5;
 165         break;
 166     case A_BLK_IDX:
 167         r = s->blk_idx;
 168         break;
 169     case A_BLK_LUT:
 170         r = s->blk_lut[s->blk_idx];
 171         tz_mpc_autoinc_idx(s, size);
 172         break;
 173     case A_INT_STAT:
 174         r = s->int_stat;
 175         break;
 176     case A_INT_EN:
 177         r = s->int_en;
 178         break;
 179     case A_INT_INFO1:
 180         r = s->int_info1;
 181         break;
 182     case A_INT_INFO2:
 183         r = s->int_info2;
 184         break;
 185     case A_PIDR4:
 186     case A_PIDR5:
 187     case A_PIDR6:
 188     case A_PIDR7:
 189     case A_PIDR0:
 190     case A_PIDR1:
 191     case A_PIDR2:
 192     case A_PIDR3:
 193     case A_CIDR0:
 194     case A_CIDR1:
 195     case A_CIDR2:
 196     case A_CIDR3:
 197         r = tz_mpc_idregs[(offset - A_PIDR4) / 4];
 198         break;
 199     case A_INT_CLEAR:
 200     case A_INT_SET:
 201         qemu_log_mask(LOG_GUEST_ERROR,
 202                       "TZ MPC register read: write-only offset 0x%x\n",
 203                       offset);
 204         r = 0;
 205         break;
 206     default:
 207         qemu_log_mask(LOG_GUEST_ERROR,
 208                       "TZ MPC register read: bad offset 0x%x\n", offset);
 209         r = 0;
 210         break;
 211     }
 212
 213     if (size != 4) {
 214         /* None of our registers are read-sensitive (except BLK_LUT,
 215          * which can special case the "size not 4" case), so just
 216          * pull the right bytes out of the word read result.
 217          */
 218         r = extract32(r, (addr & 3) * 8, size * 8);
 219     }
 220
 221 read_out:
 222     trace_tz_mpc_reg_read(addr, r, size);
 223     *pdata = r;
 224     return MEMTX_OK;
 225 }
 226
 227 static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
 228                                     uint64_t value,
 229                                     unsigned size, MemTxAttrs attrs)
 230 {
 231     TZMPC *s = TZ_MPC(opaque);
 232     uint32_t offset = addr & ~0x3;
 233
 234     trace_tz_mpc_reg_write(addr, value, size);
 235
 236     if (!attrs.secure && offset < A_PIDR4) {
 237         /* NS accesses can only see the ID registers */
 238         qemu_log_mask(LOG_GUEST_ERROR,
 239                       "TZ MPC register write: NS access to offset 0x%x\n",
 240                       offset);
 241         return MEMTX_OK;
 242     }
 243
 244     if (size != 4) {
 245         /* Expand the byte or halfword write to a full word size.
 246          * In most cases we can do this with zeroes; the exceptions
 247          * are CTRL, BLK_IDX and BLK_LUT.
 248          */
 249         uint32_t oldval;
 250
 251         switch (offset) {
 252         case A_CTRL:
 253             oldval = s->ctrl;
 254             break;
 255         case A_BLK_IDX:
 256             oldval = s->blk_idx;
 257             break;
 258         case A_BLK_LUT:
 259             oldval = s->blk_lut[s->blk_idx];
 260             break;
 261         default:
 262             oldval = 0;
 263             break;
 264         }
 265         value = deposit32(oldval, (addr & 3) * 8, size * 8, value);
 266     }
 267
 268     if ((s->ctrl & R_CTRL_LOCKDOWN_MASK) &&
 269         (offset == A_CTRL || offset == A_BLK_LUT || offset == A_INT_EN)) {
 270         /* Lockdown mode makes these three registers read-only, and
 271          * the only way out of it is to reset the device.
 272          */
 273         qemu_log_mask(LOG_GUEST_ERROR, "TZ MPC register write to offset 0x%x "
 274                       "while MPC is in lockdown mode\n", offset);
 275         return MEMTX_OK;
 276     }
 277
 278     switch (offset) {
 279     case A_CTRL:
 280         /* We don't implement the 'data gating' feature so all other bits
 281          * are reserved and we make them RAZ/WI.
 282          */
 283         s->ctrl = value & (R_CTRL_SEC_RESP_MASK |
 284                            R_CTRL_AUTOINC_MASK |
 285                            R_CTRL_LOCKDOWN_MASK);
 286         break;
 287     case A_BLK_IDX:
 288         s->blk_idx = value % s->blk_max;
 289         break;
 290     case A_BLK_LUT:
 291         tz_mpc_iommu_notify(s, s->blk_idx, s->blk_lut[s->blk_idx], value);
 292         s->blk_lut[s->blk_idx] = value;
 293         tz_mpc_autoinc_idx(s, size);
 294         break;
 295     case A_INT_CLEAR:
 296         if (value & R_INT_CLEAR_IRQ_MASK) {
 297             s->int_stat = 0;
 298             tz_mpc_irq_update(s);
 299         }
 300         break;
 301     case A_INT_EN:
 302         s->int_en = value & R_INT_EN_IRQ_MASK;
 303         tz_mpc_irq_update(s);
 304         break;
 305     case A_INT_SET:
 306         if (value & R_INT_SET_IRQ_MASK) {
 307             s->int_stat = R_INT_STAT_IRQ_MASK;
 308             tz_mpc_irq_update(s);
 309         }
 310         break;
 311     case A_PIDR4:
 312     case A_PIDR5:
 313     case A_PIDR6:
 314     case A_PIDR7:
 315     case A_PIDR0:
 316     case A_PIDR1:
 317     case A_PIDR2:
 318     case A_PIDR3:
 319     case A_CIDR0:
 320     case A_CIDR1:
 321     case A_CIDR2:
 322     case A_CIDR3:
 323         qemu_log_mask(LOG_GUEST_ERROR,
 324                       "TZ MPC register write: read-only offset 0x%x\n", offset);
 325         break;
 326     default:
 327         qemu_log_mask(LOG_GUEST_ERROR,
 328                       "TZ MPC register write: bad offset 0x%x\n", offset);
 329         break;
 330     }
 331
 332     return MEMTX_OK;
 333 }
 334
 335 static const MemoryRegionOps tz_mpc_reg_ops = {
 336     .read_with_attrs = tz_mpc_reg_read,
 337     .write_with_attrs = tz_mpc_reg_write,
 338     .endianness = DEVICE_LITTLE_ENDIAN,
 339     .valid.min_access_size = 1,
 340     .valid.max_access_size = 4,
 341     .impl.min_access_size = 1,
 342     .impl.max_access_size = 4,
 343 };
 344
 345 static inline bool tz_mpc_cfg_ns(TZMPC *s, hwaddr addr)
 346 {
 347     /* Return the cfg_ns bit from the LUT for the specified address */
 348     hwaddr blknum = addr / s->blocksize;
 349     hwaddr blkword = blknum / 32;
 350     uint32_t blkbit = 1U << (blknum % 32);
 351
 352     /* This would imply the address was larger than the size we
 353      * defined this memory region to be, so it can't happen.
 354      */
 355     assert(blkword < s->blk_max);
 356     return s->blk_lut[blkword] & blkbit;
 357 }
 358
 359 static MemTxResult tz_mpc_handle_block(TZMPC *s, hwaddr addr, MemTxAttrs attrs)
 360 {
 361     /* Handle a blocked transaction: raise IRQ, capture info, etc */
 362     if (!s->int_stat) {
 363         /* First blocked transfer: capture information into INT_INFO1 and
 364          * INT_INFO2. Subsequent transfers are still blocked but don't
 365          * capture information until the guest clears the interrupt.
 366          */
 367
 368         s->int_info1 = addr;
 369         s->int_info2 = 0;
 370         s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HMASTER,
 371                                   attrs.requester_id & 0xffff);
 372         s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HNONSEC,
 373                                   ~attrs.secure);
 374         s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, CFG_NS,
 375                                   tz_mpc_cfg_ns(s, addr));
 376         s->int_stat |= R_INT_STAT_IRQ_MASK;
 377         tz_mpc_irq_update(s);
 378     }
 379
 380     /* Generate bus error if desired; otherwise RAZ/WI */
 381     return (s->ctrl & R_CTRL_SEC_RESP_MASK) ? MEMTX_ERROR : MEMTX_OK;
 382 }
 383
 384 /* Accesses only reach these read and write functions if the MPC is
 385  * blocking them; non-blocked accesses go directly to the downstream
 386  * memory region without passing through this code.
 387  */
 388 static MemTxResult tz_mpc_mem_blocked_read(void *opaque, hwaddr addr,
 389                                            uint64_t *pdata,
 390                                            unsigned size, MemTxAttrs attrs)
 391 {
 392     TZMPC *s = TZ_MPC(opaque);
 393
 394     trace_tz_mpc_mem_blocked_read(addr, size, attrs.secure);
 395
 396     *pdata = 0;
 397     return tz_mpc_handle_block(s, addr, attrs);
 398 }
 399
 400 static MemTxResult tz_mpc_mem_blocked_write(void *opaque, hwaddr addr,
 401                                             uint64_t value,
 402                                             unsigned size, MemTxAttrs attrs)
 403 {
 404     TZMPC *s = TZ_MPC(opaque);
 405
 406     trace_tz_mpc_mem_blocked_write(addr, value, size, attrs.secure);
 407
 408     return tz_mpc_handle_block(s, addr, attrs);
 409 }
 410
 411 static const MemoryRegionOps tz_mpc_mem_blocked_ops = {
 412     .read_with_attrs = tz_mpc_mem_blocked_read,
 413     .write_with_attrs = tz_mpc_mem_blocked_write,
 414     .endianness = DEVICE_LITTLE_ENDIAN,
 415     .valid.min_access_size = 1,
 416     .valid.max_access_size = 8,
 417     .impl.min_access_size = 1,
 418     .impl.max_access_size = 8,
 419 };
 420
 421 static IOMMUTLBEntry tz_mpc_translate(IOMMUMemoryRegion *iommu,
 422                                       hwaddr addr, IOMMUAccessFlags flags,
 423                                       int iommu_idx)
 424 {
 425     TZMPC *s = TZ_MPC(container_of(iommu, TZMPC, upstream));
 426     bool ok;
 427
 428     IOMMUTLBEntry ret = {
 429         .iova = addr & ~(s->blocksize - 1),
 430         .translated_addr = addr & ~(s->blocksize - 1),
 431         .addr_mask = s->blocksize - 1,
 432         .perm = IOMMU_RW,
 433     };
 434
 435     /* Look at the per-block configuration for this address, and
 436      * return a TLB entry directing the transaction at either
 437      * downstream_as or blocked_io_as, as appropriate.
 438      * If the LUT cfg_ns bit is 1, only non-secure transactions
 439      * may pass. If the bit is 0, only secure transactions may pass.
 440      */
 441     ok = tz_mpc_cfg_ns(s, addr) == (iommu_idx == IOMMU_IDX_NS);
 442
 443     trace_tz_mpc_translate(addr, flags,
 444                            iommu_idx == IOMMU_IDX_S ? "S" : "NS",
 445                            ok ? "pass" : "block");
 446
 447     ret.target_as = ok ? &s->downstream_as : &s->blocked_io_as;
 448     return ret;
 449 }
 450
 451 static int tz_mpc_attrs_to_index(IOMMUMemoryRegion *iommu, MemTxAttrs attrs)
 452 {
 453     /* We treat unspecified attributes like secure. Transactions with
 454      * unspecified attributes come from places like
 455      * rom_reset() for initial image load, and we want
 456      * those to pass through the from-reset "everything is secure" config.
 457      * All the real during-emulation transactions from the CPU will
 458      * specify attributes.
 459      */
 460     return (attrs.unspecified || attrs.secure) ? IOMMU_IDX_S : IOMMU_IDX_NS;
 461 }
 462
 463 static int tz_mpc_num_indexes(IOMMUMemoryRegion *iommu)
 464 {
 465     return IOMMU_NUM_INDEXES;
 466 }
 467
 468 static void tz_mpc_reset(DeviceState *dev)
 469 {
 470     TZMPC *s = TZ_MPC(dev);
 471
 472     s->ctrl = 0x00000100;
 473     s->blk_idx = 0;
 474     s->int_stat = 0;
 475     s->int_en = 1;
 476     s->int_info1 = 0;
 477     s->int_info2 = 0;
 478
 479     memset(s->blk_lut, 0, s->blk_max * sizeof(uint32_t));
 480 }
 481
 482 static void tz_mpc_init(Object *obj)
 483 {
 484     DeviceState *dev = DEVICE(obj);
 485     TZMPC *s = TZ_MPC(obj);
 486
 487     qdev_init_gpio_out_named(dev, &s->irq, "irq", 1);
 488 }
 489
 490 static void tz_mpc_realize(DeviceState *dev, Error **errp)
 491 {
 492     Object *obj = OBJECT(dev);
 493     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 494     TZMPC *s = TZ_MPC(dev);
 495     uint64_t size;
 496
 497     /* We can't create the upstream end of the port until realize,
 498      * as we don't know the size of the MR used as the downstream until then.
 499      * We insist on having a downstream, to avoid complicating the code
 500      * with handling the "don't know how big this is" case. It's easy
 501      * enough for the user to create an unimplemented_device as downstream
 502      * if they have nothing else to plug into this.
 503      */
 504     if (!s->downstream) {
 505         error_setg(errp, "MPC 'downstream' link not set");
 506         return;
 507     }
 508
 509     size = memory_region_size(s->downstream);
 510
 511     memory_region_init_iommu(&s->upstream, sizeof(s->upstream),
 512                              TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
 513                              obj, "tz-mpc-upstream", size);
 514
 515     /* In real hardware the block size is configurable. In QEMU we could
 516      * make it configurable but will need it to be at least as big as the
 517      * target page size so we can execute out of the resulting MRs. Guest
 518      * software is supposed to check the block size using the BLK_CFG
 519      * register, so make it fixed at the page size.
 520      */
 521     s->blocksize = memory_region_iommu_get_min_page_size(&s->upstream);
 522     if (size % s->blocksize != 0) {
 523         error_setg(errp,
 524                    "MPC 'downstream' size %" PRId64
 525                    " is not a multiple of %" HWADDR_PRIx " bytes",
 526                    size, s->blocksize);
 527         object_unref(OBJECT(&s->upstream));
 528         return;
 529     }
 530
 531     /* BLK_MAX is the max value of BLK_IDX, which indexes an array of 32-bit
 532      * words, each bit of which indicates one block.
 533      */
 534     s->blk_max = DIV_ROUND_UP(size / s->blocksize, 32);
 535
 536     memory_region_init_io(&s->regmr, obj, &tz_mpc_reg_ops,
 537                           s, "tz-mpc-regs", 0x1000);
 538     sysbus_init_mmio(sbd, &s->regmr);
 539
 540     sysbus_init_mmio(sbd, MEMORY_REGION(&s->upstream));
 541
 542     /* This memory region is not exposed to users of this device as a
 543      * sysbus MMIO region, but is instead used internally as something
 544      * that our IOMMU translate function might direct accesses to.
 545      */
 546     memory_region_init_io(&s->blocked_io, obj, &tz_mpc_mem_blocked_ops,
 547                           s, "tz-mpc-blocked-io", size);
 548
 549     address_space_init(&s->downstream_as, s->downstream,
 550                        "tz-mpc-downstream");
 551     address_space_init(&s->blocked_io_as, &s->blocked_io,
 552                        "tz-mpc-blocked-io");
 553
 554     s->blk_lut = g_new0(uint32_t, s->blk_max);
 555 }
 556
 557 static int tz_mpc_post_load(void *opaque, int version_id)
 558 {
 559     TZMPC *s = TZ_MPC(opaque);
 560
 561     /* Check the incoming data doesn't point blk_idx off the end of blk_lut. */
 562     if (s->blk_idx >= s->blk_max) {
 563         return -1;
 564     }
 565     return 0;
 566 }
 567
 568 static const VMStateDescription tz_mpc_vmstate = {
 569     .name = "tz-mpc",
 570     .version_id = 1,
 571     .minimum_version_id = 1,
 572     .post_load = tz_mpc_post_load,
 573     .fields = (VMStateField[]) {
 574         VMSTATE_UINT32(ctrl, TZMPC),
 575         VMSTATE_UINT32(blk_idx, TZMPC),
 576         VMSTATE_UINT32(int_stat, TZMPC),
 577         VMSTATE_UINT32(int_en, TZMPC),
 578         VMSTATE_UINT32(int_info1, TZMPC),
 579         VMSTATE_UINT32(int_info2, TZMPC),
 580         VMSTATE_VARRAY_UINT32(blk_lut, TZMPC, blk_max,
 581                               0, vmstate_info_uint32, uint32_t),
 582         VMSTATE_END_OF_LIST()
 583     }
 584 };
 585
 586 static Property tz_mpc_properties[] = {
 587     DEFINE_PROP_LINK("downstream", TZMPC, downstream,
 588                      TYPE_MEMORY_REGION, MemoryRegion *),
 589     DEFINE_PROP_END_OF_LIST(),
 590 };
 591
 592 static void tz_mpc_class_init(ObjectClass *klass, void *data)
 593 {
 594     DeviceClass *dc = DEVICE_CLASS(klass);
 595
 596     dc->realize = tz_mpc_realize;
 597     dc->vmsd = &tz_mpc_vmstate;
 598     dc->reset = tz_mpc_reset;
 599     dc->props = tz_mpc_properties;
 600 }
 601
 602 static const TypeInfo tz_mpc_info = {
 603     .name = TYPE_TZ_MPC,
 604     .parent = TYPE_SYS_BUS_DEVICE,
 605     .instance_size = sizeof(TZMPC),
 606     .instance_init = tz_mpc_init,
 607     .class_init = tz_mpc_class_init,
 608 };
 609
 610 static void tz_mpc_iommu_memory_region_class_init(ObjectClass *klass,
 611                                                   void *data)
 612 {
 613     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
 614
 615     imrc->translate = tz_mpc_translate;
 616     imrc->attrs_to_index = tz_mpc_attrs_to_index;
 617     imrc->num_indexes = tz_mpc_num_indexes;
 618 }
 619
 620 static const TypeInfo tz_mpc_iommu_memory_region_info = {
 621     .name = TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
 622     .parent = TYPE_IOMMU_MEMORY_REGION,
 623     .class_init = tz_mpc_iommu_memory_region_class_init,
 624 };
 625
 626 static void tz_mpc_register_types(void)
 627 {
 628     type_register_static(&tz_mpc_info);
 629     type_register_static(&tz_mpc_iommu_memory_region_info);
 630 }
 631
 632 type_init(tz_mpc_register_types);